The initialization is split more clearly between compressed and lpcm case.
For the compressed case, format selection is simplified a lot and negotiation
removed. The way it was written it just passed back to the core the original
requested format, not what was found available on hardware.
Since this is most likely useless for the compressed case, I didn't bother
with this. In the future I'd like to split this AO in two one that only uses
the AUHAL and the other with direct access to the hardware so that even
passthrough of lcpm can be possible. This would decrease the latency,
audiophiles would like that.
Split out some utility functions that use the CoreAudio API but are not related
the main task of the AOs (which is to move data correctly to the ringbuffer).
These are mainly need for the verbosity of the CoreAudio API and are just
obscuring the 'real' code.
Read only the requested amount by the AUHAL (instead of all the buffered data).
No idea what the deal is with pausing the audio units if there is no audio to
play, maybe to avoid underruns of some sort. Anyway from my tests this
condition never occurred so I'm removing it all.
Make the VF/VO/AO option parser available to audio filters. No audio
filter uses this yet, but it's still a quite intrusive change.
In particular, the commands for manipulating filters at runtime
completely change. We delete the old code, and use the same
infrastructure as for video filters. (This forces complete
reinitialization of the filter chain, which hopefully isn't a problem
for any use cases. The old code forced reinitialization too, but it
could potentially allow a filter to cache things; e.g. consider loaded
ladspa plugins and such.)
This code is supposed to run if dynamic filter insertion (such as when
inserting a volume filter in mixer.c) fails. Then it removes all filters
and recreates the default list of filters. But the code just blew up and
entered an endless loop, because it removed even the sentinel in/out
filters. This could happen when trying to use softvol controls while
using spdif, but also other situations. Fix it by calling the correct
code.
Also remove these obnoxious yoda-conditions.
MSDN tells me to multiply the samplerates by 4 (for setting up the S/PDIF
signal frequency), but doesn't mention that I'm only supposed to do it
on the new, NT6.1+ IEC 61937 structs. Works on my Realtek Digital Output,
but as I can't connect any hardware to it I can't hear the result.
Also, always ask for little-endian AC3. I'm not sure if this is supposed
to be LE or NE, but Windows is LE on all platforms, so we go with LE.
Entirely untested as this troper has no S/PDIF hardware.
Refuses trying any other format if we can't use passthrough, or we would
end up sending white noise at the user.
Do an strstr match against the device description and, if we have only
a single match, take it. This works as long as the devices in the system
don't change, but it's not supposed to be reliable; if one wants
reliability, one uses the device ID string.
Formatting.
This could turn valid parameters into syntax errors by the mere presence
or abscence of a device (e.g. USB audio devices), so don't do that.
We do validate that, if the parameter is an integer, it is not negative.
We also respond to the "help" parameter, which does the same as the "list"
suboption but exits after listing.
Demote the validation logging to MSGL_DBG2.
Validates by trying to pick the device using the device enumerator and
aborting with out of range on failure.
Refactors find_and_load_device to not use the wasapi_state; it might be
called during validation. Adds missing CoInitialize/CoUninitialize calls.
Remove unused variables (the SAFE_RELEASE macros keep them referenced so
compiler warnings don't help finding them...).
Remove the IMMDeviceEnumerator from the wasapi_state, it's only needed
during initialization and initialization is now well factored enough to
get rid of it.
Try and connect to unplugged devices as well when using the device ID
string.
Omit "{0.0.0.00000000}." on devices that start with that substring,
re-add when searching for devices by ID.
Log the device ID of the default device.
Log the friendly name of the used device.
Consistently refer to endpoints/devices as devices, as this is more
consistent with mpv terminology.
Uses WASAPI in shared mode by default, add :exclusive flag to choose
exclusive mode (duh). WASAPI works somewhat different in shared mode:
the OS suggests the sample format to use, and the GetBuffer call is
done slightly differently.
The shared mode driver does not consume audio as fast as it notifies
the thread; we need to check how much we're allowed to write. Not doing
this correctly results in spamming the console with
AUDCLNT_E_BUFFER_TOO_LARGE errors.
When guessing formats for exclusive mode, try several sample size and
sample rate combinations instead of just falling back to s16le@44100hz.
If none of the rates are accepted, tries remixing >6 channels to 5.1
channels. Failing that, tries remixing to stereo. Failing everything,
including the CD Red Book format, what else is left to test?
Calculate buffer_block_size based on the configured channels and bytes
per sample; MSDN docs say nBlockAlign is not guaranteed to be set for
anything but integer PCM formats.
Adds the :list suboption to ao_wasapi0, which enumerates the audio endpoints
in the system.
Adds the :device=<n> suboption, which either takes an ID string (as output by
list) or a device number and uses the requested device instead of the system
default.
These two options were supported by ALSA and OSS only. Further, their
values were specific to the respective audio systems, so it doesn't make
sense to keep them as top-level options.
This changes how device names are handled. Before this commit, device
names were mangled in strange ways to avoid clashing with the option
parser syntax. "." was replaced with ",", and "=" with ":" (the user had
to do the inverse to get the correct device name).
The "new" option parser has multiple ways to escape option strings, so
we don't need this confusing hack anymore.
Add an explicit note to the manpage as well.
Seeking calls thread_reset, but doesn't call thread_play. thread_reset
would disable WASAPI events, but they would never get re-enabled unless
the user paused and then unpaused.
Keep track of whether the stream is paused or not (there already was a
field for that, but it was apparently unused), and if it's not paused,
call thread_play after thread_reset. Fixes mpv freezing after seeks.
Fixes format specifies that assume windows TYPEDEFS are as long as they look
like they are.
Remove calls to _beginthreadex and _endthreadex, these are only present on
microsoft's C runtimes. Replace by the otherwise identical CreateThread and
ExitThread calls.
This actually requires fixes to devicetopology.h, but the problem has been
(kinda) reported to mingw-w64:
<Kovensky> I see that those KSJACK* structs are supposedly declared in
devicetopology.h itself, but for some reason (some of?) the decls that use
them aren't seeing them?
<Kovensky> ok, it seems that it expects ks.h and ksmedia.h to declare those
structs, but it doesn't
<Kovensky> the included files declare KDATAFORMAT, KSIDENTIFIER and LUID (and
the associated pointer typedefs)
<Kovensky> but everything else is essentially inside #if 0
<Kovensky> changing the #ifndef _KS_ to only include KDATAFORMAT, KSIDENTIFIER
and LUID (and putting the KSJACK stuff outside that #ifndef) makes the
header compile
<Kovensky> it solves my immediate problem, but if that happened to begin with
there's probably something more wrong with the ks headers :S
Matroska has an output sample rate (OutputSamplingFrequency), which in
theory should be forced instead of whatever the decoder outputs. But it
appears no software (other than mplayer2 and mpv until now) actually
respects this. Even worse, there were broken files around, which played
correctly with (in theory) broken software, but not mplayer2/mpv. Hacks
were added to our code to play these files correctly, but they didn't
catch all cases.
Simplify this by doing what everyone else does, and always use the
decoder's sample rate instead. In particular, we try to handle all
sample rate issues like libavformat's Matroska demuxer does.
It turns out that some code that was removed earlier was still needed.
avcodec_decode_audio4() can decode packets "partially". In that case,
you have to "slice" the packet and call the decode function again.
Codecs which need this are obscure and in low numbers. One sample that
needs it is here:
rsync://fate-suite.ffmpeg.org/fate-suite/lossless-audio/luckynight-partial.shn
(This one decodes in rather small increments.)
The new code is much simpler than what has been removed earlier,
though. The fact that we own the packet returned by the demuxer helps
a lot.
Not sure what should happen if avcodec_decode_audio4() returns 0.
Currently, we throw away the packet in this case. We don't want to be
stuck in an endless loop (could happen if the decoder produces no
output either).
This is not directly related to the handling of format changes itself,
but playing audio normally after the change. This was broken: the output
byte rate was not recalculated, so audio-video sync was simply broken.
Fix this by calculating the byte rate on the fly, instead of storing it
in sh_audio.
Format changes are relatively common (switches between stereo and 5.1
in TV recordings), so this fixes a somewhat critical bug.
pts_bytes can't just be changed at the end. It must be offset to the pts
value, which is reset with each packet read from the demuxer. Make sure
the pts_byte field is always reset after receiving a new PTS, i.e.
increment it after actually writing to the output buffer.
Flush the AVFormatContext's write buffer, because otherwise the audio
PTS will jump around too much: the calculation doesn't use the exact
output buffer size if there's still data in the avio buffer.
Partial packet reads were needed because the video/audio parsers were
working on top of them. So it could happen that a parser read a part of
a packet, and returned that to the decoder. With libavformat/libavcodec,
packets are already parsed, and everything is much simpler.
Most of the simplifications in ad_spdif could have been done earlier.
Remove some other stuff as well, like the questionable slave mode start
time reporting (could be replaced by proper code, but we don't bother).
Remove the unused skip_audio_frame() functionality as well (it was used
by old demuxers). Some functions become private to demux.c, like
demux_fill_buffer(). Introduce new packet read functions, which have
simpler semantics. Packets returned from them are owned by the caller,
and all packets in the demux.c packet queue are considered unread.
Remove special code that dropped subtitle packets with size 0. This
used to be needed because it caused special cases in the old code.
We don't need to deal with partial packet reads, manually using an audio
parser, or having to call the libavcodec decoder multiple times per
packet.
Actually, I'm not sure about the last point. ffplay still does this, but
the ffmpeg demuxing.c example doesn't.
The audio parser was needed only by the "old" demuxers, and
demux_rawaudio. All other demuxers output already parsed packets.
demux_rawaudio is usually for raw audio, so using a parser with it
doesn't usually make sense. But you can also force it to read
compressed formats with fixed packet sizes, in which case the parser
would have been used. This use case is probably broken now, but you
will be able to do the same thing with libavformat demuxers.
Delete demux_avi, demux_asf, demux_mpg, demux_ts. libavformat does
better than them (except in rare corner cases), and the demuxers have
a bad influence on the rest of the code. Often they don't output
proper packets, and require additional audio and video parsing. Most
work only in --no-correct-pts mode.
Remove them to facilitate further cleanups.
The core didn't use these fields, and use of them was inconsistent
accross AOs. Some didn't use them at all. Some only set them; the values
were completely unused by the core. Some made full use of them.
Remove these fields. In places where they are still needed, make them
private AO state.
Remove the --abs option. It set the buffer size for ao_oss and ao_dsound
(being ignored by all other AOs), and was already marked as obsolete. If
it turns out that it's still needed for ao_oss or ao_dsound, their
default buffer sizes could be adjusted, and if even that doesn't help,
AO suboptions could be added in these cases.
Some still do, because they use the value in other places of the init
function. ao_portaudio is tricky and reads ao->bps in the stream
thread, which might be started on initialization (not sure about that,
but better safe than sorry).
Currently every single AO was implementing it's own ringbuffer, many times
with slightly different semantics. This is an attempt to fix the problem.
I stole some good ideas from ao_portaudio's ringbuffer and went from there.
The main difference is this one stores wpos and rpos which are absolute
positions in an "infinite" buffer. To find the actual position for writing /
reading just apply modulo size.
The producer only modifies wpos while the consumer only modifies rpos. This
makes it pretty easy to reason about and make the operations thread safe by
using barriers (thread safety is guaranteed only in the Single-Producer/Single-
Consumer case).
Also adapted ao_coreaudio to use this ringbuffer.
This is hopefully the start of something good. ca_ringbuffer_read and
ca_ringbuffer_write can probably cleaned up from all the NULL checks once
ao_coreaudio.c gets simplyfied.
Conflicts:
audio/out/ao_coreaudio.c
Whatever this was supposed to be originally, it doesn't have much value
anymore. It just forced ad_mpg123 to upmix mono to stereo by default
(the audio chain can do that). As an option, it was mostly useless and
misleading, so get rid of it.
This was overlooked with commit 32a898f, because OSS4 volume control is
typically not available on Linux. BSD does have this feature, so the
broken code broke compilation there.
Fixes crashes when playing with certain numbers of channels. The core
assumes AOs accept data aligned on channels * samplesize, and ao_jack's
play() function broke that assumption:
mpv: core/mplayer.c:2348: fill_audio_out_buffers: Assertion `played % unitsize == 0' failed.
Fix by aligning the buffer and chunk sizes as needed.
Audio and video had their own (very similar) functions to initialize an
AVPacket (ffmpeg's packet struct) from a demux_packet (mplayer's packet
struct). Add a common function for these.
Also use this function for sd_lavc_conv. This is actually a functional
change, as some libavfilter subtitle demuxers add weird out-of-band
stuff as side-data.
GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
The ALSA device was not closed when initialization failed.
The ALSA error handler (set with snd_lib_error_set_handler()) was not
unset when closing ao_alsa. If this is not done, the handler will still
be called when other libraries using ALSA cause errors, even though
ao_alsa was long closed. Since these messages were prefixed with
"[AO_ALSA]", they were misleading and implying ao_alsa was still used.
For some reason, our error handler is still called even after doing
snd_lib_error_set_handler(NULL), which should be impossible. Checking
with the debuggers, inserting printf(), as well as the alsa-lib source
code all suggest our error handler should not be called, but it still
happens. It's a complete mystery.
Mostly copied from vf_lavfi. The parts that could be shared are minor,
because most code is about setting up audio and video, which are too
different.
This won't work with Libav. I used ffplay.c as guide, and noticed too
late that their setup methods are incompatible with Libav's. Trying to
make it work with both would be too much effort. The configure test for
av_opt_set_int_list() should disable af_lavfi gracefully when compiling
with Libav.
Due to option parser chaos, you currently can't have a "," as part of
the filter graph string - not even with quoting or escaping. This will
probably be fixed later.
The audio filter chain is not PTS aware. So we have to do some hacks
to make up a fake PTS, and we have to map the output PTS back to the
filter chain's method of tracking PTS changes and buffering, by
adjusting af->delay.
FFmpeg (as well as Libav) have two layouts called "6.1":
AV_CH_LAYOUT_6POINT1 and AV_CH_LAYOUT_6POINT1_BACK. We call them "6.1"
and "6.1(back)". Change the default layout for 7 channels as well to
return the same layout as av_get_default_channel_layout(). (Looks a bit
questionable, but for now it's better to follow FFmpeg.)
It turns out that ALSA's 4 channel layout is different from mpv's and
ffmpeg's 4.0 layout. Thus trying to do 4 channel output led to incorrect
remixing via lib{av,sw}resample.
Fix the default layouts for the internal filter chain as well, although
I'm not sure if it matters at all.
The libavresample version of the current Libav stable release lacks the
avresample_set_channel_mapping() function. (FFmpeg's libswresample seems
to be fine, because they added swr_set_channel_mapping() first.)
Add a cheap/slow workaround to do channel reordering on our own. We
don't use the recently removed MPlayer code (see commit 586b75a),
because that is not generic enough.
The functionality should be the same as with full-featured
libavresample, and any differences are bugs. It's probably slower,
though.
af_reinit() is responsible for inserting automatic conversion filters
for channel remixing, format conversion, and resampling. We don't
require that a single filter can do all these (even though
af_lavrresample does nearly all of this, sometimes af_format has to be
used instead for format conversions). This makes setting up the chain
more complicated, and a way is needed to prevent endless appending of
conversion filters if a conversion is not possible.
Until now, this used a stupidly simple yet robust static retry limit to
detect failure. This is perfectly fine, and the limit (20) was good
enough to handle about ~5 filters. But with more filters, and if each
filter requires 3 additional conversion filters, this would fail. So
raise the limit to 4 retries per filter. This is still stupidly simple
and robust, but won't arbitrarily fail if the filter count is too large.
To make this easier, get rid of the direct mapping of the
AF_FORMAT_BITS_MASK bit field to number of bytes. This way we can throw
away the unused AF_FORMAT_48BIT and don't have to add ..._56BIT.
The snd_pcm_hw_params_test_format() call actually crashes in alsa-lib if
called with SND_PCM_FORMAT_UNKNOWN, so the already existing fallback
code won't work in this case.
Make all AOs use what has been introduced in the previous commit.
Note that even AOs which can handle all possible layouts (like ao_null)
use the new functions. This might be important if in the future
ao_select_champ() possibly honors global user options about downmixing
and so on.
The point is selecting a minimal fallback. The AOs will call this
through the AO API, so it will be possible to add options affecting
the general channel layout selection.
It provides the following mechanism to AOs:
- forcing the correct channel order
- downmixing to stereo if no layout is available
- allow 5.1 <-> 5.1(side) fallback
- handling "unknown" channel layouts
This is quite weak and lots of code/complexity for little gain. All AOs
already made sure the channel order was correct, and the fallback is of
little value, and could perhaps be done in the frontend instead, like
stereo downmixing with --channels=2 is handled. But I'm not really sure
how this stuff should _really_ work, and the new code will hopefully
provides enough flexibility to make radical changes to channel layout
negotiation easier.
If one of the input or output is an unknown layout, but the other is
known, it can still happen that channels are remixed randomly. Avoid
this by forcing default layouts in this case. (Doesn't work if the
channel counts are different.)
Now mpv's channel map is used to map each channel to a speaker. This
allows in theory for playback of any layout for which ao_openal
actually has a speaker defined. Also add the back-center (BC) speaker,
which allows playback of 6.0 audio. Enabling more layouts by adding
other speakers would be possible, but I'm not sure about the speaker
positions.
This allows supporting 5 channel audio (which can be eother 5.0 or 4.1).
Fallback doesn't work yet. It will do nonsense if the channel layout
doesn't match perfectly, even though it's similar.
Add a CHECK_ALSA_ERROR macro to report ALSA errors. This is similar to
what vo_vdpau does. This removes lots of boiler plate, it almost gives
me the feeling the ao_alsa initialization code is now readable. This
change is squashed with the reformatting, because both changes are
just as noisy and useless.
Using demux_rawaudio and the --rawaudio-channels option is useful for
testing channel map stuff. The libavcodec PCM decoder normalizes the
channel map to ffmpeg order, though. Prevent this by forcing the
original channel map when using the mp-pcm pseudo decoder entry (used by
demux_rawaudio and stream/tv.c only).
Like most other AOs, ao_pulse set the channel count only, always using a
default layout. Try to set the exact layout.
For this, we need a big lookup table to map waveex/lavc/mpv speaker
position to PulseAudio's, since PA_CHANNEL_POSITION_ is apparently not
compatible to waveext, and I haven't seen any API functions that would
help mapping them.
Completely untested. (Let's leave that to someone else...)
This helps passing the channel layout correctly from decoder to audio
filter chain. (Because that part "reuses" the demuxer level codec
parameters, which is very disgusting.)
Note that ffmpeg stuff already passed the channel layout via
mp_copy_lav_codec_headers(). So other than easier dealing with the
demuxer/decoder parameters mess, there's no real advantage to doing
this.
Make the --channels option accept a channel map. Since simple numbers
map to standard layouts with the given number of channels, this is
downwards compatible. Likewise for demux_rawaudio.
This is done in af_lavrresample now, and as part of format negotiation.
Also remove the remaining reorder_channel calls. They were redundant
and did nothing.
This actually breaks audio for 5/6/8 channels. There's no reordering
done yet. The actual reordering will be done inside of af_lavrresample
and has to be made part of the format negotiation.
mp_audio has some redundant fields. Setters like mp_audio_set_format()
initialize these properly.
Also move the mp_audio struct to a the file audio.c.
We can remove a mysterious line of code from af.c:
in.format |= af_bits2fmt(in.bps * 8);
I'm not sure if this was ever actually needed, or if it was some kind of
"make it work" quick-fix that works against the way things were supposed
to work. All filters etc. now set the format correctly, so if there ever
was a need for this code, it's definitely gone.
Schedule mpv's playloop as a high frequency timer inside the main Cocoa event
loop. This has the benefit to allow accessing menus as well as resizing the
window without the playback being blocked and allows to remove countless hacks
from the code that involved manually pumping the event loop as well simulating
manually some of the Cocoa default behaviours.
A huge improvement consists in removing NSApplicationLoad. This is a C function
defined in the Cocoa header and implements a minimal OSX application under ther
hood so that you can use the Cocoa GUI toolkit from C/C++ without having to
respect the Cocoa standards in terms of application initialization. This was
bad because the behaviour implemented by NSApplicationLoad was hard to customize
and had several gotchas especially in the menu department.
mpv was changed to be just a nib-less application. All the Cocoa part is still
generated in code but the event handling is now not dissimilar to what is
present in a stock Mac application.
As a part of reviewing the initialization process, I also removed all of
`osdep/macosx_finder_args`. The useful parts of the code were moved to
`osdep/macosx_appication` which has the broaded responsibility of managing the
full lifecycle of the Cocoa application. By consequence the
`--enable-macosx-finder` configure switch was killed as well, as this feature
is always enabled.
Another change the users will notice is that when using a bundle the `--quiet`
option will be inserted much earlier in the initializaion process. This results
in mpv not spamming mpv.log anymore with all the initialization outputs.
Add dummy input and output filters to remove special cases in the format
negotiation code (af_fix_format_conversion() etc.). The output of the
filter chain is now negotiated in exactly the same way as normal
filters.
Negotiate setting the sample rate in the same way as other audio
parameters. As a side effect, the resampler is inserted at the start of
the filter chain instead of the end, but that shouldn't matter much,
especially since conversion and channel mixing are conflated into the
same filter (due to libavresample's API).
Anything this option did has been removed in the preceding 3 commits.
Note that even though these options sounded like a good idea (like
setting accuracy vs. speed tradeoffs), they were not really properly
implemented.
All this option did was deciding whether the resample filter was to be
insert at the beginning or end of the filter chain. Always do what the
option set for accuracy did. I doubt it makes much of a difference.
libavresample does most things in just one go anyway, so it won't
matter.
Dangerous and misleading. If it turns out that this is actually needed
to make certain setups work right, it should be added back in a better
way (in a way it doesn't cause random crashes).
The only thing this option did was changing the behavior of af_volume.
The option decided what sample format af_volume would use, but only if
the sample format was not already float. If the option was set, it would
default to float, otherwise to S16.
Remove use of the option and all associated code, and make af_volume
always use float (unless a af_volume specific sub-option is set).
Silence maximum value tracking. This message is printed when the filter
is destroyed, and it's slightly annoying. Was enabled due to enabling
float by default.
Switch the internal channel order to libavcodec's. If the channel number
mismatches at some point, use libavresample for up- or downmixing.
Remove the old af_pan automatic downmixing.
The libavcodec channel order should be equivalent to WAVEFORMATEX order,
at least nowadays. reorder_ch.h assumes that WAVEFORMATEX and libavcodec
might be different, but all defined channels have the same mappings.
Remove the downmixing with af_pan as well as the channel conversion with
af_channels from af.c, and prefer af_lavrresample for this. The
automatic downmixing behavior should be the same as before (if the
--channels option is set to 2, which is the default, the audio output
is forced to 2 channels, and libavresample does all downmixing).
Note that mpv still can't do channel layouts. It will pick the default
channel layout according to the channel count. This will be fixed later
by passing down the channel layout as well.
af_hrtf depends on the order of the input channels, so reorder to ALSA
(for which this code was written). This is better than changing the
filter code, which is more risky.
ao_pulse can accept waveext order directly, so set that as channel
mapping.
If format negotiation fails, and additional filters are inserted to fix
this, don't try to reinitialize the filter immediately. Instead, correct
the audio format, and let the caller retry.
Add a retry counter to af_reinit() to ensure that misbehaving filters
can't put the format negotiation into an endless loop.
Refactor to remove the duplicated format filter insertion code. Allow
other format converting filters to be inserted on format mismatches.
af_info.test_conversion checks whether conversion between two formats
would work with the given filter; do this to avoid having to insert
multiple conversion filters at once and such things. (Although this
isn't ideal: what if we want to avoid af_format for some conversions?
What if we want to split af_format in endian-swapping filters etc.?)
Prefer af_lavrresample for conversions that it supports natively,
otherwise let af_format handle the full conversion.
Make sure automatically inserted filters are removed on full reinit
(they are re-added later if they are really needed). Automatically
inserted filters were never explicitly removed, instead, it was
expected that redundant conversion filters detach themselves. This
didn't work if there were several chained format conversion filters,
e.g. s16le->floatle->s16le, which could result from repeated filter
insertion and removal. (format filters detach only if input format and
output format are the same.)
Further, the dummy filter (which exists only because af.c can't handle
an empty filter chain for some reason) could introduce bad conversions
due to how the format negotiation works. Change the code so that the
dummy filter never takes part on format negotiation. (It would be better
to fix format negotiation, but that would be much more complicated and
would involving fixing all filters.)
Simplify af_reinit() and remove the start audio filter parameter. This
means format negotiation and filter initialization is run more often,
but should be harmless.
The format was locked to s16. Extend it to accept all other ffmpeg
sample formats, and even allow different in- and output formats. The
generic filter code will still insert af_format on format mismatches,
though.
The change in af_scaletempo actually fixes a memory leak. af->data
contained a pointer to an allocated buffer, which was overwritten
during format negotiation. Set the format explicitly instead.
Consider:
mpv --volume 10 file1.mkv file2.mkv
Before this commit, the volume was reset to 10 when playing file2.mkv.
This was inconsistent to most other options. E.g. --brightness is a
rather similar case.
In general, settings should never be reset when playing the next file,
unless the option was explicitly marked file-local. This commit
corrects the behavior of the --volume and --mute options.
File local --volume still works as expected:
mpv --{ --volume 10 file1.mkv file2.mkv --}
This sets the volume always to 10 on playback start.
Move the m_config_leave_file_local() call down so that the mixer code
in uninit_player() can set the option volume and mute variables without
overwriting the global option values.
Another subtle issue is that we don't want to set volume if there's no
need to, which is why the user_set_volume/mute fields are introduced.
This is important because setting the volume might change the system
volume depending on other options.
Remove `af_resample` and `af_lavcresample`. The former is a mess while the
latter uses an API that was long deprecated in libavcodec and is now removed.
`af_lavrresample` rougly has the same features and structure of
`af_lavcresample`.
libswresample fallback by wm4.
The old names have been deprecated a while ago, but were needed for
supporting older ffmpeg/libav versions. The deprecated identifiers
have been removed from recent Libav and FFmpeg git.
This change breaks compatibility with Libav 0.8.x and equivalent
FFmpeg releases.
avcodec_encode_audio() was deprecated, and was finally removed from
Libav and FFmpeg git.
This appears to work. I get heavy A/V desync with -ao alsa and -ao pcm,
but this was already so before this change.
The spdif decoder was hardcoded to assume that the spdif output is
capable of accepting high (>1.5Mbps) bitrates. While this is true
for modern HDMI spdif interfaces, the original coax/toslink system
cannot deal with this and will fail to work.
This patch adds an option --dtshd which can be enabled if you use
a DTS-capable receiver behind a HDMI link.
The previous name of this filter was misleading, because it doesn’t actually
normalize volume levels. What it does is closer to performing low-quality
dynamic range compression, hence it is now called af_drc.
Instead of putting codec header data into WAVEFORMATEX and
BITMAPINFOHEADER, pass it directly via AVCodecContext. To do this, we
add mp_copy_lav_codec_headers(), which copies the codec header data
from one AVCodecContext to another (originally, the plan was to use
avcodec_copy_context() for this, but it looks like this would turn
decoder initialization into an even worse mess).
Get rid of the silly CodecID <-> codec_tag mapping. This was originally
needed for codecs.conf: codec tags were used to identify codecs, but
libavformat didn't always return useful codec tags (different file
formats can have different, overlapping tag numbers). Since we don't
go through WAVEFORMATEX etc. and pass all header data directly via
AVCodecContext, we can be absolutely sure that the codec tag mapping is
not needed anymore.
Note that this also destroys the "standard" MPlayer method of exporting
codec header data. WAVEFORMATEX and BITMAPINFOHEADER made sure that
other non-libavcodec decoders could be initialized. However, all these
decoders have been removed, so this is just cruft full of old hacks that
are not needed anymore. There's still ad_spdif and ad_mpg123, bu neither
of these need codec header data. Should we ever add non-libavcodec
decoders, better data structures without the past hacks could be added
to export the headers.
Rearrange some code to make it easier readable. Remove some dead code,
and stop printing AVI headers in demux_lavf. (These are not actual AVI
headers, just for internal use.)
There should be no functional changes, other than reducing output in
verbose mode.
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
mpv -ao help and mpv -vo help shouldn't show the encoding outputs (named
"lavc" on both cases). Also make it impossible to select these manually
when not encoding.
On Linux, ao_portaudio has weird freezing issues (possibly specific to
the ALSA backend, though). Also ao_dsound is more likely to get multi-
channel audio output right, and ao_portaudio probably mangles these.
This partially reverts earlier decisions, when I thought it would
always be better to prefer the audio volume filter over the AO's,
because the AO's relies on the underlying audio-API, which could
be broken or exhibit unusual behavior (like it happened with ao_dsound).
However, since the audio buffer can be quite large (500 ms), and we
don't attempt to flush & refilter the audio on volume changes, always
prefer AO volume control (as long as the AO mixer doesn't control the
system mixer).
Also document what the mixer.c related AO fields mean (hopefully not
too brief).
Handle all pending events and exit instead of waiting. When there are lots of
input events (for example, scrolling with trackpad), timeout can add up
to make a huge frame delay. In my tests, if I scroll fast enough, that loop
would never exit.
This function sucks and apparently is not very portable (at least on
mingw, the configure check fails). Also remove the emulation of that
function from osdep/strsep*, and remove the configure check.
mixer_setvolume() accepts float values for volume, but used the
integer function av_clip() to limit range, losing the fractional part
as a side effect. Change the code to use av_clipf() instead. For most
uses this shouldn't make any real difference; actual AO volume
settings may not have that much precision anyway.
af_volnorm can process either int16_t or float audio data. The float
version used 0 to INT_MAX as full value range, when it should be 0 to
1. This effectively disabled the filter (due to all input being
considered to fall in the silence range). Fix.
Reported by Tobias Jacobi <liquid.acid@gmx.net>.
This causes trouble when a hw device is used:
pcm_hw.c:514:(snd_pcm_hw_delay) SNDRV_PCM_IOCTL_DELAY failed (-77): File descriptor in bad state
when running mpv test.mkv --ao=alsa:device=iec958,alsa and pausing
during playback.
Historically, mplayer usually did not call snd_pcm_delay() (which is
called by get_delay()) while paused, so this problem never showed up.
But at least mpv has changes that cause get_delay() to be called when
updating the status line (see commit 3f949cf).
It's possible that calling snd_pcm_delay() is not always legal when the
audio is paused, and at least fails with the error message mentioned
above is the device is a hardware device. Change get_delay() to return
the last delay before the audio was paused. The intention is to get a
continuous playback status display, even when pausing or frame stepping,
otherwise we could just return the audio buffer fill status in
get_delay() or even just 0 when paused.
Uses the same trick as the planarization code to turn per-sample memcpy
calls into mov instructions. Makes decoding a ~25min 48000Hz 2ch floatle
audio file faster from 3.8s to 2.7s.
This mainly serves as a fallback for platforms where nothing better is
available; also as a debugging help. Both the audio and video driver are
not first class - the audio driver lacks delay detection, and the video
driver only supports a single YUV color space.
Configure options: --disable-sdl2 to disable SDL 2.0+ detection,
--disable-sdl to disable SDL 1.2+ detection. Both options need to be
specified to turn off SDL support entirely.
Add `mp_find_config_file` to search different known paths and use that in
ass_mp to look for the fontconfig configuration file.
Some incidental changes spawned by this feature where:
* Buffer allocation for the strings containing the paths is now performed
with talloc. All of the allocations are done on a NULL context, but it still
improves readability of the code.
* Move the OSX function for lookup inside of a bundle: this code path was
currently not used by the bundle generated with `make osxbundle`. The plan
is to use it again in a future commit to get a fontconfig config file.
ad_dvdpcm reads MPEG specific headers directly (passed through codecdata
by demux_mpg), so you couldn't use ffmpeg's "pcm_dvd" with demux_mpg.
Change demux_mpg to set the correct audio parameters directly. The code
for this is taken from ad_dvdpcm.
ad_dvdpcm is evil because it still does partial packet reads (with
demux_read_data()), and it's redundant to libavcodec anyway.
Since libavcodec doesn't have a "generic" PCM decoder, we have to go out
of out way to make it look like ad_lavc provides one: make it provide a
pseudo "pcm" decoder, which maps some format tags manually to the
individual libavcodec PCM decoders.
Format tags which uniquely map to one libavcodec could be mapped via
codecs.conf. Since defining these in tag_map[] is much shorter (one line
vs. a full codec entry in codecs.conf), and since we need tag_map[]
anyway, we don't use codecs.conf for these.
ad_pcm is evil because it still does partial packet reads (with
demux_read_data()), and it's redundant to libavcodec anyway.
Do not fall back to 0 for samplerate when parser is not initialized.
Might fix some issues with using -ac spdifenc with audio in MKV
or MP4.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35517 b3059339-0415-0410-9bf9-f77b7e298cf2
Replace outdated list of unsupported formats by list of supported formats.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35534 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not call af_fmt2str on the same data over and over.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35535 b3059339-0415-0410-9bf9-f77b7e298cf2
ad_spdif: use the more specific AF_FORMAT_AC3_LE when
we handle AC3.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35536 b3059339-0415-0410-9bf9-f77b7e298cf2
Make AF_FORMAT_IS_IEC61937 include AF_FORMAT_IS_AC3.
Our AC3 "sample format" is also iec61937.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35537 b3059339-0415-0410-9bf9-f77b7e298cf2
af_format: support endianness conversion also for iec61937
formats in general, not just AC3.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35538 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
audio/filter/af_format.c
af_format: Fix check_format, non-special formats are of course supported.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35545 b3059339-0415-0410-9bf9-f77b7e298cf2
Note: see mplayer bug #2110
Reinitialize sh_audio->samplesize and sample_format before falling back
to another audio decoder (some decoders rely on default values). Remove
code setting these fields from demux_mkv and demux_lavf (no decoder
should depend on demuxer-set values for these fields).
Conflicts:
audio/decode/ad_lavc.c
Merged from mplayer2 commit 6b9567. The changes to ad_lavc.c are not
merged, as they are very specific to the mplayer2 libavresample hack;
we deplanarize manually, so we can't get unsupported sample formats
yet (except on raw audio with "pcm_f64le", as we don't support
AV_SAMPLE_FMT_DBL in the audio chain).
The option is -no-video. Remove the deprecated "fast" suboption, which
did nothing and instructed the user to use "-novideo" instead.
Fix a reference to -novideo in encoding.rst.
Add a "generic" entry about -no-* to the list of renamed options. The
change is already explicitly mentioned in the text above the table, but
even if it's redundant, it makes it harder to overlook.
This fixes operation with current ffmpeg releases.
Note that this planarization is slow and should be reverted once proper
planar audio support is there in mpv.
PulseAudio allows applications to set volume over 100%. To make this
possible, the PulseAudio daemon raises the global system volume, and
tries to lower other applications volumes. Unfortunately, this doesn't
work out and doesn't manage to keep the effective volume level of these
other applications.
To make it short: this functionality invoked PulseAudio bugs. Disable
it.
This essentially reverts commit 85a64b.
When a video filter returned inf as PTS, the player crashed. One
reason for this was that decode_audio() was called with a negative
minlen parameter, which at some point caused it to call a memory
allocation function with a ridiculous value, triggering an out of
memory code path in talloc.c. (talloc.c has been modified to abort()
on out of memory situations.)
Fix this by sanity checking minlen in decode_audio(). (The check
against outbuf->len always succeeded, because it's an unsigned
comparison.)
Make an existing sanity check in mplayer.c more robust: check for NaN
too, which happens if the video PTS is inf.
This happened with "-vf pullup,softpulldown" (but is not triggered when
the following commit is applied).
Most of these are reimar fixing issues found by Coverity static
analyzer, and possibly some more cleanup commits independent from
this.
Since these commits are rather noisy, squash them all together.
Try to make code a bit clearer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35294 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
audio/out/ao_alsa.c
Check the correct variable for NULL.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35323 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless unreachable code (the loop condition already checks
the 0xff case).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35325 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix typo that might have caused reading beyond the string end.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35326 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not needlessly use "long" types.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35331 b3059339-0415-0410-9bf9-f77b7e298cf2
Use AV_RB32 to avoid sign extension issues and validate offset before using it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35332 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove nonsense casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35343 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix crash in case sh_audio allocation failed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35348 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix potential NULL dereference.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35351 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpcodecs/ad_ffmpeg.c
Note: Slightly modified.
Fix malloc failure check to check the correct variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35353 b3059339-0415-0410-9bf9-f77b7e298cf2
Avoid code duplication and pointless casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35363 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Error out if an invalid channel list name was specified
instead of continuing and reading outside array bounds
all over the place.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35364 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Make array "static const".
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35365 b3059339-0415-0410-9bf9-f77b7e298cf2
Properly free resources even when encountering many
parse errors.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35367 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
parser-cfg.c
Avoid leaks in error handling.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35380 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not do sign comparisons on "char" type which can be both signed or unsigned.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35381 b3059339-0415-0410-9bf9-f77b7e298cf2
Free cookies file data after parsing it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35382 b3059339-0415-0410-9bf9-f77b7e298cf2
http_set_field only makes a copy of the string, so we still need to
free it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35383 b3059339-0415-0410-9bf9-f77b7e298cf2
check4proxies does not modify input URL, so mark it const.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35390 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove proxy "support" from stream_rtp and stream_upd, trying
to use a http proxy for UDP connections makes no sense.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35394 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/stream_rtp.c
stream/stream_udp.c
Add url_new_with_proxy function to reduce code duplication and memleaks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35395 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/pnm.c
stream/stream_live555.c
stream/stream_nemesi.c
stream/stream_rtsp.c
Fix off-by-one errors in file descriptor validity checks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35402 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless cast.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35403 b3059339-0415-0410-9bf9-f77b7e298cf2
Abort when opening the file failed instead of calling
"write" with an invalid descriptor.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35404 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless local variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35411 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/http.c
Libav 0.8.4 is ridiculously old (in relative terms), so I don't know
how many things are broken silently.
Encoding is disabled, because the required API hasn't been added yet.
(On the other hand, the old API can't be used in newer versions.)
This should improve compatibility with ffmpeg 0.11.2 as well, which
didn't define AV_CODEC_ID_SUBRIP yet.
Lowering volume while muted did not work correctly with audio outputs
that support native mute setting separate from volume (ao_alsa and
ao_pulse), because the AO-level volume was not set while muted but was
still being read back. Fix by setting the AO volume in this case.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
