Until now, we have made the assumption that a driver will use only 1
hardware surface format. the format is dictated by the driver (you
don't create surfaces with a specific format - you just pass a
rt_format and get a surface that will be in a specific driver-chosen
format).
In particular, the renderer created a dummy surface to probe the format,
and hoped the decoder would produce the same format. Due to a driver
bug this required a workaround to actually get the same format as the
driver did.
Change this so that the format is determined in the decoder. The format
is then passed down as hw_subfmt, which allows the renderer to configure
itself with the correct format. If the hardware surface changes its
format midstream, the renderer can be reconfigured using the normal
mechanisms.
This calls va_surface_init_subformat() each time after the decoder
returns a surface. Since libavcodec/AVFrame has no concept of sub-
formats, this is unavoidable. It creates and destroys a derived
VAImage, but this shouldn't have any bad performance effects (at
least I didn't notice any measurable effects).
Note that vaDeriveImage() failures are silently ignored as some
drivers (the vdpau wrapper) support neither vaDeriveImage, nor EGL
interop. In addition, we still probe whether we can map an image
in the EGL interop code. This is important as it's the only way
to determine whether EGL interop is supported at all. With respect
to the driver bug mentioned above, it doesn't matter which format
the test surface has.
In vf_vavpp, also remove the rt_format guessing business. I think the
existing logic was a bit meaningless anyway. It's not even a given
that vavpp produces the same rt_format for output.
Apply basic transformations like rotation by 90° and mirroring when
sampling from the source textures. The original idea was making this
part of img_tex.transform, but this didn't work: lots of code plays
tricks on the transform, so manipulating it is not necessarily
transparent, especially when width/height are switched. So add a new
pre_transform field, which is strictly applied before the normal
transform.
This fixes most glitches involved with rotating the image.
Cropping and rotation are now weirdly separated, even though they could
be done in the same step. I think this is not much of a problem, and
has the advantage that changing panscan does not trigger FBO
reallocations (I think...).
Typically happens with some implementations if no context is currrent,
or is otherwise broken. This is particularly relevant to the opengl_cb
API, because the API user will have no other indication what went wrong.
The underlying intention of this code is to make changing
--videotoolbox-format at runtime work. For this reason, the format can't
just be statically setup, but must be read from the option at runtime.
This means the format is not fixed anymore, and we have to make sure the
renderer is property reinitialized if the format changes. There is
currently no way to trigger reinit on this level, which is why the
mp_image_params.hw_subfmt field was introduced.
One sketchy thing remains: normally, the renderer is supposed to be
involved with VO format negotiation, which would ensure that the VO
can take the format at all. Since the hw_subfmt is not part of this
format negotiation, it's implied the get_vt_fmt() callback only
returns formats supported by the renderer. This is not necessarily
clear because vo_opengl checks this with converted_imgfmt separately.
None of this matters in practice though, because we know all formats
are always supported.
(This still requires somehow triggering decoder reinit to make the
change effective.)
This makes the black point closer (chromatically) to the white point, by
ensuring channels keep their consistent brightness ratios as they go
down to zero.
I also raised the 3DLUT version as this changes semantics and is a
separate commit from the previous one.
This commit refactors the 3DLUT loading mechanism to build the 3DLUT
against the original source characteristics of the file. This allows us,
among other things, to use a real BT.1886 profile for the source. This
also allows us to actually use perceptual mappings. Finally, this
reduces errors on standard gamut displays (where the previous 3DLUT
target of BT.2020 was unreasonably wide).
This also improves the overall accuracy of the 3DLUT due to eliminating
rounding errors where possible, and allows for more accurate use of
LUT-based ICC profiles.
The current code is somewhat more ugly than necessary, because the idea
was to implement this commit in a working state first, and then maybe
refactor the profile loading mechanism in a later commit.
Fixes#2815.
This also draws it after color management etc. In a nutshell, this
change makes the transparency checkerboard independent of upscaling,
panning, cropping etc. It will always be the same apparent size and
position (relative to the window).
It will also be independent of the video colorspace and such things.
(Note: This might cause white imbalance issues if playing a file with a
white point that does not match the display, in absolute colorimetric
mode. But that's uncommon, especially in conjunction with transparent
image files, so it's not a primary concern here)
Until now, we've let the windowing backend decide. But since they
usually require premultiplied alpha, and premultiplied alpha is easier
to handle, hardcode it.
The recent changes fixed rotation handling, but reversed the rotation
direction. The direction is expected to be counter-clockwise, because
demuxers export video rotation metadata as such.
This has been completely broken since commit 93546f0c. But even before,
rotation handling did not make too much sense. In particular, it rotated
the contents of the cropped image, instead of adjusting the crop
rectangle as well. The result was that things like panscan or zooming
did not behave as expected with rotation applied.
The same is true for vertical flipping. Flipping is triggered by
negative image stride. OpenGL does not support flipping the image on
upload, so it's done as part of the rendering. It can be triggered with
--vf=flip, but other filters and even decoders could setup negative
stride to flip the image.
Fix these issues by applying transforms to texture coordinates properly,
and by making rotation and flipping part of these transforms.
This still doesn't work properly for separated scaling. The issue is
that we'd have to adjust how the passes are done. For now, pick a very
stupid solution by rotating the image to a FBO, and then scaling from
that. This has the avantage that the scale logic doesn't have to be
complicated for such a rare case. It could be improved later.
Prescaling is apparently still broken. I don't know if chroma
positioning works properly either. None of this should affect the case
with no rotation.
gl_transform_vec() assumed column-major, while everything else seemed to
assumed row-major memory organization for gl_transform.m. Also,
gl_transform_trans() seems to contain additional confusion.
This didn't matter until now, as everything has been orthogonal, this
the swapped matrix entries were always 0.
If the texture count is lower than 4, entries in va.textcoord[] will
remain uninitialized. While this is unlikely to be a problem (since
these values are unused on the shader side too), it's not nice and might
explain some things which have shown up in valgrind.
Fix by always initializing the whole thing.
Instead of reallocating almost all of the shader string several times
per pass, build it into a fixed buffer that will be reallocated as
needed.
While this still uses a linear search and full comparison of the shader
text, this will compare the shader's string length first before doing a
full comparison as a nice side effect. (That's also why the fragment
shader is compared first - it's more likely to be different for
different cache entries than the vertex shader stub.)
Glitches when resizing are still possible, but are reduced. Other VOs
could support this too, but don't need to do so.
(Totally avoiding glitches would be much more effort, and probably not
worth the trouble. How about you just watch the video the player is
playing, instead of spending your time resizing the window.)
Until now, we have tried to create a GL 3.0 context. The main reason for
this is that many Mesa-based drivers did not support anything better.
But some drivers (Mesa AMD) will not report a higher OpenGL version,
because their compatibility mode is restricted. While later GL features
are reported as extensions just fine, there doesn't seem to be a way to
determine or enable higher GLSL versions.
Add some more shitty hacks to try to deal with this messed up situation,
and try to probe each interesting GL version separately (starting with
3.3, then 3.2 etc.). Other backends might suffer from similar problems,
but these will have to deal with it on their own.
Probably fixes#2938, or maybe not.
converted_imgfmt will be used by the renderer logic to build an
appropriate shader chain. It doesn't influence the format of any
textures. Thus it doesn't matter whether the hw video surface is mapped
as RGB or RGBA. What matters is if the video actually contains alpha or
not. Since virtually all hardware decoder do not support alpha in any
way, this can be hardcoded as "no alpha".
This avoids unnecessary GPU work.
This also gets rid of the kind of hard to read texture swizzle setup and
turns it into something dumber.
Assumes that we don't create any FBOs with 2 channel formats. (Only the
video source textures are handled by this commit.)
Previously, gl->DXOpenDeviceNV was called twice using dxva2 with dxinterop. AMD
drivers refused to allow this. With this commit, context_dxinterop sets its own
implementation of MPGetNativeDisplay, which can return either a
IDirect3DDevice9Ex or a dxinterop_device_HANDLE depending on the "name" request
string. hwdec_dxva2gldx then requests both of these avoiding the need to call
gl->DXOpenDeviceNV a second time.
Like dxinterop, this uses StretchRect or RGB conversion. This is unavoidable as
long as we use the dxva2 API, as there is no way to access the raw hardware
decoded Direct3D9 surfaces.
The default of 1.0 was basically making half the algorithm do nothing,
since it turned off all diagonal contributions. The upstream default is
0.6, and this produces a more reasonable image.
The values were changed to reflect an upstream change in the source for
the super-xBR implementation.
The anti-ringing code was basically not working at all, the new
algorithm _significantly_ improves the result (reduces ringing).
This is a fresh implementation from scratch that carries with it
significantly less baggage and verbosity from the previous (ported)
version.
The actual values for the masks and such were copied from the
current code. Behavior and performance should be unaffected.
An important difference between the old code and the new code is that
the new code always explicitly samples from the first component, rather
than being able to process multiple planes at once.
Since prescale-luma only affects luma, I deemed this unnecessary. May
change in the future, if prescale-chroma ever gets implemented. But
prescaling multiple planes would be slow to do this way. (Better would
be to generalize it to differently-sized vectors)
Instead of hard-coding the logic and planes to skip, factor this out
to a reusible function, and instead add the number of relevant
coordinates to the texture state.
Since prescale now literally only affects the luma plane (and the
filters are all designed for luma-only operation either way), the option
has been renamed and the documentation updated to clarify this.
This is a pretty major rewrite of the internal texture binding
mechanic, which makes it more flexible.
In general, the difference between the old and current approaches is
that now, all texture description is held in a struct img_tex and only
explicitly bound with pass_bind. (Once bound, a texture unit is assumed
to be set in stone and no longer tied to the img_tex)
This approach makes the code inside pass_read_video significantly more
flexible and cuts down on the number of weird special cases and
spaghetti logic.
It also has some improvements, e.g. cutting down greatly on the number
of unnecessary conversion passes inside pass_read_video (which was
previously mostly done to cope with the fact that the alternative would
have resulted in a combinatorial explosion of code complexity).
Some other notable changes (and potential improvements):
- texture expansion is now *always* handled in pass_read_video, and the
colormatrix never does this anymore. (Which means the code could
probably be removed from the colormatrix generation logic, modulo some
other VOs)
- struct fbo_tex now stores both its "physical" and "logical"
(configured) size, which cuts down on the amount of width/height
baggage on some function calls
- vo_opengl can now technically support textures with different bit
depths (e.g. 10 bit luma, 8 bit chroma) - but the APIs it queries
inside img_format.c doesn't export this (nor does ffmpeg support it,
really) so the status quo of using the same tex_mul for all planes is
kept.
- dumb_mode is now only needed because of the indirect_fbo being in the
main rendering pipeline. If we reintroduce p->use_indirect and thread
a transform through the entire program this could be skipped where
unnecessary, allowing for the removal of dumb_mode. But I'm not sure
how to do this in a clean way. (Which is part of why it got introduced
to begin with)
- It would be trivial to resurrect source-shader now (it would just be
one extra 'if' inside pass_read_video).
Why was this done so stupidly, with so many complicated special cases,
before? Declare it once so the shader bits don't have to figure out where
and when to do so themselves.
The WGL_NV_DX_interop spec says that a shared IDirect3DSurface9 must not
be lockable, but off-screen plain surfaces are always lockable and using
them causes Nvidia drivers to crash. Use a rendertarget for the shared
surface instead.
This also changes the name of the DX_interop handle for the rendertarget
to match the name of the DirectX object (rather than the GL one) to
match the convention used in context_dxinterop.c.
