WGL_NV_DX_interop is widely supported by Nvidia and AMD drivers. It
allows a texture to be shared between Direct3D and WGL, so that
rendering can be done with WGL and presentation can be done with
Direct3D. This should allow us to work around some persistent WGL
issues, such as dropped frames with some driver/OS combos, drivers that
buffer frames to increase performance at the cost of latency, and the
inability to disable exclusive fullscreen mode when using WGL to render
to a fullscreen window.
The addition of a DX_interop backend might also enable some cool
Direct3D-specific enhancements in the future, such as using the
GetPresentStatistics API to get accurate frame presentation timestamps.
Note that due to a driver bug, this backend is currently broken on
Intel. It will appear to work as long as the window is not resized too
often, but after a few changes of size it will be unable to share the
newly created renderbuffer with GL. See:
https://software.intel.com/en-us/forums/graphics-driver-bug-reporting/topic/562051
All of these are supported by FFmpeg now. It was disabled by default
too (with FFmpeg).
If compiled against Libav, mpv will lose the ability to read some
subtitle formats (but the most important ones, srt and ass, still should
work).
This is only for specific Hauppage cards. According to the comments in
who is actively using this feature. Get it out of the way.
Anyone who still wants to use this should complain. Keeping this code
would not cause terribly much additional work, and it could be restored
again. (But not if the request comes months later.)
With default setting, the matrix for fruit dithering requires 12 bits
precision (values from 0/4096 to 4095/4096). But 16-bit float
provides only 10 bits. In addition, when `dither-size-fruit=8` is
set, 16 bits are required from the texture format.
Fix this by attempting to use 16 bit integer texture first. This is
still not precise, but should be better than using a half float.
This has no reason to be there. Put the functionality into another
function instead. While we're at it, also adjust for possible accuracy
issues with high bit depth YUV (matters for rendering subtitles into
screenshots only).
The recent LUT adjustment changes broke interpolation.
The concatenation of the shader stages is a bit messy, and it seems like
sampler_prelude is not a good place to add this macro. Always add the
macro to every shader instead. (While this doesn't seem too elegant,
this isn't too inelegant either, and goes these problems out of the
way.)
The computation of the tex_mul variable was broken in multiple ways.
This variable is used e.g. by debanding for moving expansion of 10 bit
fixed-point input to normalized range to another stage of processing.
One obvious bug was that the rgb555 pixel format was broken. This format
has component_bits=5, but obviously it's already sampled in normalized
range, and does not need expansion. The tex_mul-free code path avoids
this by not using the colormatrix. (The code was originally designed to
work around dealing with the generally complicated pixel formats by only
using the colormatrix in the YUV case.)
Another possible bug was with 10 bit input. It expanded the input by
bringing the [0,2^10) range to [0,1], and then treating the expanded
input as 16 bit input. I didn't bother to check what this actually
computed, but it's somewhat likely it was wrong anyway. Now it uses
mp_get_csp_mul(), and disables expansion when computing the YUV matrix.
It turns out that with accurate lookup we can decrease the
default size of texture now. Do it to compensate the performance
loss introduced by the LUT_POS macro.
Define a macro to correct the coordinate for lookup texture. Cache
the corrected coordinate for 1D filter and use mix() to minimize the
performance impact.
It always was a weird artifact - VOCTRLs are meant _not_ to require
special handling in the code that passes them through (like in vo.c).
Removing it is also interesting to further reduce the dependency of
backends on struct vo. Just get rid of it.
Removing it is somewhat inconvenient, because in many situations the UI
window is created after the first VOCTRL_UPDATE_WINDOW_TITLE. This means
these backends have to store it in a new field in their own context.
Fixes a reported sample, that has a sign interrupted by a few frames
(for which --sub-fix-timing would remove the wanted gap).
The list of tags in has_overrides() is taken from libass. It has a
similar function (which even checks whether the tag are within the { }
delimiters). Unfortunately, this function is not public, so we just have
a simpler one which does roughly the same. It doesn't matter that this
function sometimes returns false positives.
The awkward "preprocess" step of putting the subtitles through single
filters before doing something else was made unnecessary by the recent
changes.
(Fun fact: I originally planned to move these extra things, like fixing
subtitle gaps/overlaps, to filters - but this would suffer from various
complications, and moving them to the renderers seems much simpler.)
I feel like it's better there. Note that there is no reduced
functionality, as bitmaps subs (i.e. not handled by sd_ass.c) were never
fully read on init, and thus never went through sub_read_all_packets().
On the other hand, this might lead to confusion, as --sub-fps etc. will
now also affect muxed subtitles (which makes not much sense).
Instead of messing with the subtitle packet timestamps, do it on output.
We work on the libass event list. If there is an unwanted gap or
overlap, we render the timestamp at another position where there is no
gap or overlap.
This is somewhat more robust, and even works with demuxed subs (to some
degree - depends whether the subs are prefected soon enough).
It's active even for native ASS subs. I wonder if this is a problem with
extended type setting. If it is, the heuristic that tries to avoid
interrupting such cases has to be improved.
While it probably would be ideal to do this after the subtitle decoder,
certain aspects are at least currently handled better in this place.
Image subtitles often use a "signaling" packet to set the end time of
the previous subtitle. As far as the libavcodec API is concerned, such
packets decode to empty AVSubtitles. Discard these after the end time of
the previous subtitle has been set.
Keep track of the per-subtitle end time better. This is for the sake of
improving sub_step/sub_seek. Without this, it would seek to the sub
before the previous sub, if the current sub has ended displaying.
Works roughly the same as the one in sd_ass for text subtitles. While
sub_step is very uninteresting, it comes for free with the support for
sub_seek.
The implementation is taken from ass_step_sub() from libass, with some
modifications
Until now, feeding packets to the decoder in advance was done for text
subtitles only. This was possible because libass buffers all subtitle
data anyway (in ASS_Track). sd_lavc, responsible for bitmap subs, does
not do this. But it can buffer a small number of subtitle frames ahead.
Enable this.
Repurpose the sub_accept_packets_in_advance(). Instead of "can take all
packets" it means "can take 1 packet" now. (The old meaning is still
needed locally in dec_sub.c; keep it there.) It asks the decoder whether
there is place for at least 1 subtitle packet. sd_lavc implements it and
returns true if its internal fixed-size subtitle queue still has a free
slot. (The implementation of this in dec_sub.c isn't entirely clean.
For one, decode_chain() ignores this mechanism, so it's implied that
bitmap subtitles do not use the subtitle filter chain in any advanced
way.)
Also fix 2 bugs in the sd_lavc queue handling. Subtitles must be checked
in reverse, because the first entry will often have endpts==NOPTS, which
would always match. alloc_sub() must cycle the queue buffer, because it
reuses memory allocations (like sub.imgs) by design.
If reinit after a fallback from hardware fails, this field can be NULL.
The check in control() was broken due to a typo (found by Coverity), and
decode() lacked the check entirely.
If the sampling point is placed diagonally, the radius difference
could be as large as sqrt(2.0). And a loosened check with (radius - 1)
would potentially include pixels out of the range.
Fix the check to handle those corner case properly to avoid
unnecessary texture lookup and improve the performance a bit.
reopen_console_handle() was never properly tested because mpv overrides
printf in most source files. Turns out that when there's no console on
startup, the CRT sets the fds of stdout and stderr to -2, so the old
method of using dup2 to manipulate these fds didn't work. As far as I
can tell, the only way to give stdout and stderr valid fds is to use
freopen, so this uses freopen to set them both to the console output.
This also uses dup2 to change STDOUT_FILENO and STDERR_FILENO, so low-
level functions like isatty still work.
Note that this means fileno(stdout) != STDOUT_FILENO. I don't think this
will cause any problems.
This should fix MPV_LEAK_REPORT on the Windows console.
Helps with files that have occasional broken timestamps. For larger
discontinuities, e.g. caused by actual timestamp resets, we still want
to realign audio.
(I guess in general, this should be removed and replaced by a more
general resync-on-desync logic, but not now.)
Sometimes QOpenGLWidget may be redirecting it's output to a framebuffer
object rather than the frontbuffer, in which case the current thread's
context render fbo is different from the widget's. Use the widget's
desired fbo instead.
There are claims that nnedi3.c doesn't constitute its own new
implementation, but is derived from existing HLSL or OpenCL shaders
distributed under the LGPLv3 license.
Until these are resolved, do the "correct" thing and require
--enable-gpl3 to build nnedi.
This makes no sense, because the client is obligated to react to this
event.
This also happens to fix a deadlock with JSON IPC clients sending
"disable_event all", because MPV_EVENT_SHUTDOWN was used to stop the
thread driving the socket connection (fixes#2558).
Approximately reverts commit 3ccac74d. This failed with some avi files,
which do pseudo-VFR by sending packets with empty frames (or repeat
frames, depending on point of view). Specifically, these packets are not
0 bytes, so they don't get skipped by libavformat, as with the usual VFR
avi hack. Instead, the packet contains a VOP with vop_coded=0, so
libavcodec will just return no frame. We could probably distinguish such
skipped frames and delayed frames by explicitly measuring the codec
delay by counting how long it takes to get the very first frame (and
then treat skips as explicit drops), but we may as well simply reinstate
the old code.
To appease to at least one semi-broken case, do not enable this logic on
the RPI, as the FFmpeg MMAL wrapper has arbitrary buffering (and MMAL
itself is asynchronous).
