Approximate time of video buffered in the demuxer, in seconds. Same as
`demuxer-cache-duration` but returns the last timestamp of bufferred
data in demuxer.
Signed-off-by: wm4 <wm4@nowhere>
This will be used in the following commit, which adds screenshot_raw.
The reasoning is that this will be better for binding scripting
languages.
One could special-case the screenshot_raw commit and define fixed
semantics for passing through a pointer using the current API, like
formatting a pointer as string. But that would be ridiculous and
unclean.
Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
Useful for dealing with libavfilter's terrible graph syntax.
Not strictly backwards compatible (for example "[a[b]" fails now - the
"[" within the quote is interpreted now). But hopefully it's obscure
enough not to warrant any kind of compatibility hacks.
It's entirely useless, especially now that vo.c handles screenshots in a
generic way, and requires no special VO support. There are some
potential weird use-cases, but actually I've never seen it being used.
The old behavior does not make too much sense after all. If you don't
want to file to be overwritten, the user can check this manually.
This is a change in behavior - let's hope nobody actually relied on it.
libavcodec makes it impossible to distinguish dropped frames (requested
with AVCodecContext.skip_frame), and cases when the decoder simply does
not return a frame by default (such as with VP9, which has invisible
reference frames).
This confuses users when decoding VP9 video. It's basically a cosmetic
issue, so just paint it over by ignoring them if framedropping is
disabled.
It seems this choice was never documented. "always" is actually older
than "yes", so just declare it a compatibility value for "yes". (Also
move it before "always" in the C code to make this clear.)
I tried to find that option by searching for terms like “cover art”
and got nothing. I imagine most users would look for similar terms.
Hope this helps.
The gender specific pronoun is changed, since we shouldn't assume the
gender of the user.
The sentence itself is also changed to be more correct in general.
This could help in cases where the DWM (Windows desktop compositor) adds another
layer of bufferring and therefore the SwapBuffers timing could get messed up.
Signed-off-by: wm4 <wm4@nowhere>
This seems to come up often. I guess '.' vs. ':' for Lua calls is
confusing, and this part of the scripting API is the only one which
requires using it.
There still might be FFmpeg demuxers which mess up if audio is disabled
(like it happened to the FLV demuxer), but these are bugs and shouldn't
happen.
This merges all of the scaler-related options into a single
configuration struct, and also cleans up the way they're passed through
the code. (For example, the scaler index is no longer threaded through
pass_sample, just the scaler configuration itself, and there's no longer
duplication of the params etc.)
In addition, this commit makes scale-down more principled, and turns it
into a scaler in its own right - so there's no longer an ugly separation
between scale and scale-down in the code.
Finally, the radius stuff has been made more proper - filters always
have a radius now (there's no more radius -1), and get a new .resizable
attribute instead for when it's tunable.
User-visible changes:
1. scale-down has been renamed dscale and now has its own set of config
options (dscale-param1, dscale-radius) etc., instead of reusing
scale-param1 (which was arguably a bug).
2. The default radius is no longer fixed at 3, but instead uses that
filter's preferred radius by default. (Scalers with a default radius
other than 3 include sinc, gaussian, box and triangle)
3. scale-radius etc. now goes down to 0.5, rather than 1.0. 0.5 is the
smallest radius that theoretically makes sense, and indeed it's used
by at least one filter (nearest).
Apart from that, it should just be internal changes only.
Note that this sets up for the refactor discussed in #1720, which would
be to merge scaler and window configurations (include parameters etc.)
into a single, simplified string. In the code, this would now basically
just mean getting rid of all the OPT_FLOATRANGE etc. lines related to
scalers and replacing them by a single function that parses a string and
updates the struct scaler_config as appropriate.
This makes the core much more elegant, reusable, reconfigurable and also
allows us to more easily add aliases for specific configurations.
Furthermore, this lets us apply a generic blur factor / window function
to arbitrary filters, so we can finally "mix and match" in order to
fine-tune windowing functions.
A few notes are in order:
1. The current system for configuring scalers is ugly and rapidly
getting unwieldy. I modified the man page to make it a bit more
bearable, but long-term we have to do something about it; especially
since..
2. There's currently no way to affect the blur factor or parameters of
the window functions themselves. For example, I can't actually
fine-tune the kaiser window's param1, since there's simply no way to
do so in the current API - even though filter_kernels.c supports it
just fine!
3. This removes some lesser used filters (especially those which are
purely window functions to begin with). If anybody asks, you can get
eg. the old behavior of scale=hanning by using
scale=box:scale-window=hanning:scale-radius=1 (and yes, the result is
just as terrible as that sounds - which is why nobody should have
been using them in the first place).
4. This changes the semantics of the "triangle" scaler slightly - it now
has an arbitrary radius. This can possibly produce weird results for
people who were previously using scale-down=triangle, especially if
in combination with scale-radius (for the usual upscaling). The
correct fix for this is to use scale-down=bilinear_slow instead,
which is an alias for triangle at radius 1.
In regards to the last point, in future I want to make it so that
filters have a filter-specific "preferred radius" (for the ones that
are arbitrarily tunable), once the configuration system for filters has
been redesigned (in particular in a way that will let us separate scale
and scale-down cleanly). That way, "triangle" can simply have the
preferred radius of 1 by default, while still being tunable. (Rather
than the default radius being hard-coded to 3 always)
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
It was "by design" possible to make mpv crash if the parameters didn't
make enough sense, like "format=rgb24:yuv420p". While forcing the format
has some minor (rather questionable) use for debugging, allowing it to
crash is just stupid.
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
This has a number of user-visible changes:
1. A new flag blend-subtitles (default on for opengl-hq) to control this
behavior.
2. The OSD itself will not be color managed or affected by
gamma controls. To get subtitle CMS/gamma, blend-subtitles must be
used.
3. When enabled, this will make subtitles be cleanly interpolated by
:interpolation, and also dithered etc. (just like the normal output).
Signed-off-by: wm4 <wm4@nowhere>
Bilinear scaling is not a suitable default for something named "hq"; the
whole reason this was done in the past was because cscale used to be
obscenely slow. This is no longer the case, with cscale being nearly
free.
Why did this exist in the first place? Other than being completely
useless, this even caused some regressions in the past. For example,
there was the case of a laptop exposing its accelerometer as joystick
device, which led to extremely fun things due to the default mappings of
axis movement being mapped to seeking.
I suppose those who really want to use their joystick to control a media
player (???) can configure it as mouse device or so.
This replaces the old smoothmotion code by a more flexible tscale
option, which essentially allows any scaler to be used for interpolating
frames. (The actual "smoothmotion" scaler which behaves identical to the
old code does not currently exist, but it will be re-added in a later commit)
The only odd thing is that larger filters require a larger queue size
offset, which is currently set dynamically as it introduces some issues
when pausing or framestepping. Filters with a lower radius are not
affected as much, so this is identical to the old smoothmotion if the
smoothmotion interpolator is used.
I think this is what I alwass missed ever since I found the MPlayer
cache options: a way to enable the cache on local files with the default
settings, whatever they are.
Requested change in behavior.
Note that we set the assumed "infinite" display_fps to 1e6, which
conveniently lets vo_get_vsync_interval() return a dummy value of 1,
which can be easily checked against, and still avoids doing math with
float INFs.
This adds stuff related to gamma, linear light, sigmoid, BT.2020-CL,
etc, as well as color management. Also adds a new gamma function (gamma22).
This adds new parameters to configure the CMS settings, in particular
letting us target simple colorspaces without requiring usage of a 3DLUT.
This adds smoothmotion. Mostly working, but it's still sensitive to
timing issues. It's based on an actual queue now, but the queue size
is kept small to avoid larger amounts of latency.
Also makes “upscale before blending” the default strategy.
This is justified because the "render after blending" thing doesn't seme
to work consistently any way (introduces stutter due to the way vsync
timing works, or something), so this behavior is a bit closer to master
and makes pausing/unpausing less weird/jumpy.
This adds the remaining scalers, including bicubic_fast, sharpen3,
sharpen5, polar filters and antiringing. Apparently, sharpen3/5 also
consult scale-param1, which was undocumented in master.
This also implements cropping and chroma transformation, plus
rotation/flipping. These are inherently part of the same logic, although
it's a bit rough around the edges in some case, mainly due to the fallback
code paths (for bilinear scaling without indirection).
Move the command line parsing and some other things to the common init
routine shared between command line player and client API. This means
they're using almost exactly the same code now.
The main intended side effect is that the client API will load mpv.conf;
though still only if config loading is enabled.
(The cplayer still avoids creating an extra thread, passes a command
line, and prints an exit status to the terminal. It also has some
different defaults.)
This gets rid of the need for a second (or more) parameters; instead it
can be all in one parameter. The (now) redundant parameter is still
parsed for compatibility, though.
The way the flags make each other conflict is a bit tricky: they have
overlapping bits, and the option parser disallows setting already set
bits.
This automatically sets the gamma option depending on lighting conditions
measured from the computer's ambient light sensor.
sRGB – arguably the “sibling” to BT.709 for still images – has a reference
viewing environment defined in its specification (IEC 61966-2-1:1999, see
http://www.color.org/chardata/rgb/srgb.xalter). According to this data, the
assumed ambient illuminance is 64 lux. This is the illuminance where the gamma
that results from ICC color management is correct.
On the other hand, BT.1886 formalizes that the gamma level for dim environments
to be 2.40, and Apple resources (WWDC12: 2012 Session 523: Best practices for
color management) define the BT.1886 dim at 16 lux.
So the logic we apply is:
* >= 64lux -> 1.961 gamma
* =< 16lux -> 2.400 gamma
* 16lux < x < 64lux -> logaritmic rescale of lux to gamma. The human
perception of illuminance roughly follows a logaritmic scale of lux [1].
[1]: https://msdn.microsoft.com/en-us/library/windows/desktop/dd319008%28v=vs.85%29.aspx
Breaks vo_opengl by default. I'm hot able to fix this myself, because I
have no clue about the overcomplicated color management logic. Also,
whilethis is apparently caused by commit fbacd5, the following commits
all depend on it, so revert them too.
This reverts the following commits:
e141caa97d653b0dd529729c8b3f64fbacd5de31Fixes#1636.
Just use makeFirstResponder on the mpv events view from client code
if you need the built in keyboard events (this is easier for dealing with view
nesting).
This relies on upstream support in lavc, and will hence basically not
work at all. The intent is to get support for writing this information
into ffmpeg's PNG encoders etc.
Now that we have fast stream switching, we can bump these sizes, as the
queues cause no delay in switching anymore.
Of course, the fast stream switching works for mkv and mp4 only. Other
formats will incur a quite terrible delay especially in network mode,
which this commit changes to 10 seconds. Let's see if someone
complains...
The way I interpreted it, it seemed like this was not default behavior
and could be enabled with --audio-pitch-correction - it should be made
clearer that this is actually *the default behavior*.
This is based on pretty much the same (somewhat naive) logic right now.
I'm not convinced that the extra logic that eg. madVR includes is worth
enough to warrant heavily confusing the logic for it.
This shouldn't slow down the logic at all in any sane shader compiler,
and indeed it doesn't on any shader compiler that I tested.
Note that this currently doesn't affect cscale at all, due to the weird
implementation details of that.
This option allows the user to pass non-supported options directly to
youtube-dl, such as "--proxy URL", "--username USERNAME" and
'--password PASSWORD".
There is no sanity checking so it's possible to break things (i.e.
if you pass "--version" mpv exits with random JSON error).
Signed-off-by: wm4 <wm4@nowhere>
Hopefully, this will really clear up how the thing is supposed to work
(and that it's not SVP, nor MVTools).
I also removed instances of the word "interpolation", since that's a
term that's easily misleading.
Finally, I expanded on smoothmotion-threshold since the purpose/meaning
was a bit confusing.
This is done mainly for consistency, since all of the EWA filters share
similar properties and it's important to distinguish them for
documentation purposes.
This is a variation of ewa_lanczos that is sinc-windowed instead of
jinc-windowed. Results are pretty similar, but the logic is simpler.
This could potentially replace the ugly ewa_lanczos code.
It's hard to tell, but from comparing stills I think this one has
slightly less ringing than regular ewa_lanczos.
Now --ass-use-margins doesn't apply to normal subtitles anymore. This is
probably the inverse from the mpv behavior users expected so far, and
thus a breaking change, so rename the option, that the user at least has
a chance to lookup the option and decide whether the new behavior is
wanted or not.
The basic idea here is:
- plain text subtitles should have a certain useful defalt behavior,
like actually using margins
- ASS subtitles should never be broken by default
- ASS subtitles should look and behave like plaintext subtitles if
the --ass-style-override=force option is used
This also subtly changes --sub-scale-with-window and adds the --ass-
scale-with-window option. Since this one isn't so important, don't
bother with compatibility.
You can set in which "corner" the OSD and subtitles are shown. I'd
prefer it a bit more general (so you could set the alignment using
a factor), but the libass API does not provide this.
Requested. See manpage additions.
This also makes the magical loop_times constants slightly saner, but
shouldn't change the semantics of any existing --loop option values.
Not very important for the command line player; but GUI applications
will want to know about this.
This only adds the internal API; support for specific audio outputs
comes later.
This reuses the ao struct as context for the hotplug event listener,
similar to how the "old" device listing API did. This is probably a bit
unclean and confusing. One argument got reusing it is that otherwise
rewriting parts of ao_pulse would be required (because the PulseAudio
API requires so damn much boilerplate). Another is that --ao-defaults is
applied to the hotplug dummy ao struct, which automatically applies such
defaults even to the hotplug context.
Notification works through the property observation mechanism in the
client API. The notification chain is a bit complicated: the AO notifies
the player, which in turn notifies the clients, which in turn will
actually retrieve the device list. (It still has the advantage that it's
slightly cleaner, since the AO stuff doesn't need to know about client
API issues.)
The weird handling of atomic flags in ao.c is because we still don't
require real atomics from the compiler. Otherwise we'd just use atomic
bitwise operations.
In my opinion the artifacts created by af_scaletempo on extreme slowdown
(50% or so) are too bothersome - but users disagree. So use
af_scaletempo on any speed changes, not just on speedup.
librubberband exports a big load of options. Normally, the default
settings (whether they're librubberband defaults or our defaults) should
be sufficient, but since I'm not so sure about this, making it
configurable allows others to figure it out for me.
If "--af=rubberband" is used, librubberband will be used to speed up or
slow down audio with pitch correction.
This still has some problems: the audio delay is not calculated
correctly, so the audio position jitters around by a few milliseconds.
This will probably ruin video timing.
This reverts commit a33b46194c.
It turns out FFmpeg really considers this a bug, and fixed it by making
the decoder output the correct pixel format.
Fixes#1565. Reverts the fix#1528, though it should work fine with
a recent git master FFmpeg.
Make it accept "," as separator, instead of only ":". Do this by using
the key-value-list parser. Before this, the option was stored as a
string, with the option parser verifying that the option value as
correct. Now it's stored pre-parsed, although the log levels still
require separate verification and parsing-on-use to some degree (which
is why the msg-level option type doesn't go away).
Because the internal type changes, the client API "native" type also
changes. This could be prevented with some more effort, but I don't
think it's worth it - if MPV_FORMAT_STRING is used, it still works the
same, just with a different separator on read accesses.
This introduces a new option linear-scaling, which is now implied by
srgb, icc-profile and sigmoid-upscaling.
Notably, this means (sigmoidized) linear upscaling is now enabled by
default in opengl-hq mode. The impact should be negligible, and there
has been no observation of negative side effects of sigmoidized scaling,
so it feels safe to do so.
Autoload external audio files only if there's at least a video track
(which is not coverart pseudo-video).
Enable external audio file autoloading by default. Now that we actively
avoid doing stupid things like loading an external audio file for an
audio-only file, this should be fine.
Additionally, don't autoload subtitles if a subtitle is played.
Although you currently can't play subtitles without audio or video,
it's disturbing and stupid that the player might load subtitle files
with different extension and then fail.
Giving this such a prominent place is not really appropriate anymore.
Most people seeing this would probably expect a release changelog, not
something about MPlayer.
Since the page still could be useful for former MPlayer users (in
particular to avoid confusion with renamed options etc.), still keep
it in the DOCS directory.
This shouldn't exist and for the most part is meant to be used by the
ytdl Lua script, but let's document it anyway. Since the Lua API handles
all the details, it's considered much more "stable" than the raw API,
which is why the raw API wasn't documented.
In ancient times, this was needed because it was not default, and many
VOs had problems with it. But it was always default in mpv, and all VOs
are required to deal with it. Also, running --fixed-vo=no is not useful
and just creates weird corner cases. Get rid of it.
Comment explains why I have been so doubtful at adding this. The Apple docs
say CGDisplayModeGetRefreshRate is supposed to work only for CRTs, but it
doesn't, and actually works for LCD TVs connected over HDMI and external
displays (at least that's what I'm told, I don't have the hardware to test).
Maybe Apple docs are incorrect.
Since AFAIK Apple doesn't want to give us a better API – maybe in the fear we
might be able to actually write some useful software instead of "apps" –
I decided not to care as well and commit this.
This reverts the default behavior introduced in commit 93feffad. Way too
often libavcodec will return RGB data that has an alpha channel as per
pixel format, but actually contains garbage.
On the other hand, this will actually render garbage color values in
e.g. PNG files (for pixels with alpha==0, the color value should be
essentially ignored, which is what the old alpha blend mode did).
This "fixes" #1528, which is probably a decoder bug (or far less likely,
a broken file).
Make the lazy gamma initialization less weird, and make the default
value of the "gamma" sub-option 1.0. This means --vo=opengl:help will
list the actual default value.
Also change the lower bound to 0.1 - avoids a division by zero (I don't
know how shaders handle NaN, but it's probably not a good idea to give
them this value).
These commands are counterparts of sub_add/sub_remove/sub_reload which
work for external audio file.
Signed-off-by: wm4 <wm4@nowhere>
(minor simplification)
These were derived from dividing our assumed video gamut (1.961) by some
typical screen values (2.2 for dimly lit and 2.4 for pitch black):
1.961/2.4 = 0.8170833333333334 ~= 0.8
1.961/2.2 = 0.8913636363636364 ~= 0.9
This is somewhat imperfect, because detection of hw decoding APIs is
mostly done on demand, and often avoided if not necessary. (For example,
we know very well that there are no hw decoders for certain codecs.)
This also requires every hwdec backend to identify itself (see hwdec.h
changes).
This does what it's documented to do.
The implementation reuses the code in mpv_detach_destroy(). Due to the
way async requests currently work, just sending a synchronous dummy
request (like a "ignore" command) would be enough to ensure
synchronization, but this code will continue to work even if this
changes.
The line "ctx->event_mask = 0;" is removed, but it shouldn't be needed.
(If a client is somehow very slow to terminate, this could silence an
annoying queue overflow message, but all in all it does nothing.)
Calling mpv_wait_async_requests() and mpv_wait_event() concurrently is
in theory allowed, so change pthread_cond_signal() to
pthread_cond_broadcast() to avoid missed wakeups.
As requested in issue #1542.
