Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
This collects statistics and other things. The option dumps raw data
into a file. A script to visualize this data is included too.
Litter some of the player code with calls that generate these
statistics.
In general, this will be helpful to debug timing dependent issues, such
as A/V sync problems. Normally, one could argue that this is the task of
a real profiler, but then we'd have a hard time to include extra
information like audio/video PTS differences. We could also just
hardcode all statistics collection and processing in the player code,
but then we'd end up with something like mplayer's status line, which
was cluttered and required a centralized approach (i.e. getting the data
to the status line; so it was all in mplayer.c). Some players can
visualize such statistics on OSD, but that sounds even more complicated.
So the approach added with this commit sounds sensible.
The stats-conv.py script is rather primitive at the moment and its
output is semi-ugly. It uses matplotlib, so it could probably be
extended to do a lot, so it's not a dead-end.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
This can be reproduced with:
mpv short.wav -af 'lavfi="aecho=0.8:0.9:5000|6800:0.3|0.25"'
An audio file that is just 1-2 seconds long should play for 8-9 seconds,
which audible echo towards the end.
The code assumes that when playing with AF_FILTER_FLAG_EOF, the filter
will either produce output, or has all remaining data flushed. I'm not
really sure whether this really works if there are multiple filters with
EOF handling in the chain. To handle it correctly, af_lavfi should retry
filtering if 1. EOF flag is set, 2. there were input samples, and 3. no
output samples were produced. But currently it seems to work well enough
anyway.
The new signature is actually closer to how it actually works, and
someone who is not familiar to the API and how it works might make fewer
fatal mistakes with the new signature than the old one. Pretty weird.
Do this to sneak in a flags parameter, which will later be used to flush
remaining data of at least vf_lavfi.
These used the suffix _resync_stream, which is a bit misleading. Nothing
gets "resynchronized", they really just reset state.
(Some audio decoders actually used to "resync" by reading packets for
resuming playback, but that's not the case anymore.)
Also move the function in dec_video.c to the top of the file.
This includes the case when lavc decodes audio with more than 8
channels, which our audio chain currently does not support.
the changes in ad_lavc.c are just simplifications. The code tried to
avoid overriding global parameters if it found something invalid, but
that is not needed anymore.
sh_audio is supposed to contain file headers, not whatever was decoded.
Fix this, and write the decoded format to separate fields in the decoder
context, the dec_audio.decoded field. (Note that this field is really
only needed to communicate the audio format from decoder driver to the
generic code, so no other code accesses it.)
Move all state that basically changes during decoding or is needed in
order to manage decoding itself into a new struct (dec_audio).
sh_audio (defined in stheader.h) is supposed to be the audio stream
header. This should reflect the file headers for the stream. Putting the
decoder context there is strange design, to say the least.
When the decoder detects a format change, it overwrites the values
stored in sh_audio (this affects the members sample_format, samplerate,
channels). In the case when the old audio data still needs to be
played/filtered, the audio format as identified by sh_audio and the
format used for the decoder buffer can mismatch. In particular, they
will mismatch in the very unlikely but possible case the audio chain is
reinitialized while old data is draining during a format change.
Or in other words, sh_audio might contain the new format, while the
audio chain is still configured to use the old format.
Currently, the audio code (player/audio.c and init_audio_filters) access
sh_audio to get the current format. This is in theory incorrect for the
reasons mentioned above. Use the decoder buffer's format instead, which
should be correct at any point.
Commit 22b3f522 not only redid major aspects of audio decoding, but also
attempted to fix audio format change handling. Before that commit, data
that was already decoded but not yet filtered was thrown away on a
format change. After that commit, data was supposed to finish playing
before rebuilding filters and so on.
It was still buggy, though: the decoder buffer was initialized to the
new format too early, triggering an assertion failure. Move the reinit
call below filtering to fix this.
ad_mpg123.c needs to be adjusted so that it doesn't decode new data
before the format change is actually executed.
Add some more assertions to af_play() (audio filtering) to make sure
input data and configured format don't mismatch. This will also catch
filters which don't set the format on their output data correctly.
Regression due to planar_audio branch.
This used to be in bytes, now it's in samples. Divide the value by 8
(assuming a typical audio format, float samples with 2 channels).
Fix some editing mistake or non-sense about the extra buffering added
(1<<x instead of x<<5).
Also sneak in a s/MPlayer/mpv/.
Apparently this was completely broken after commit 22b3f522. Basically,
this locked up immediately completely while decoding the first packet.
The reason was that the buffer calculations confused bytes and number of
samples. Also, EOF reporting was broken (wrong return code).
The special-casing of ad_mpg123 and ad_spdif (with DECODE_MAX_UNIT) is a
bit annoying, but will eventually be solved in a better way.
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
Before this commit, the af_instance->mul/delay values were in bytes.
Using bytes is confusing for non-interleaved audio, so switch mul to
samples, and delay to seconds. For delay, seconds are more intuitive
than bytes or samples, because it's used for the latency calculation.
We also might want to replace the delay mechanism with real PTS
tracking inside the filter chain some time in the future, and PTS
will also require time-adjustments to be done in seconds.
For most filters, we just remove the redundant mul=1 initialization.
(Setting this used to be required, but not anymore.)
Replace the code that used a single buffer with mp_audio_buffer. This
also enables non-interleaved output operation, although it's still
disabled, and no AO supports it yet.
Based on earlier work by Stefano Pigozzi.
There are 2 changes:
1. Instead of mp_audio.audio, mp_audio.planes[0] must be used.
2. mp_audio.len used to contain the size of the audio in bytes. Now
mp_audio.samples must be used. (Where 1 sample is the smallest unit
of audio that covers all channels.)
Also, some filters need changes to reject non-interleaved formats
properly.
Nothing uses the non-interleaved features yet, but this is needed so
that things don't just break when doing so.
This member was redundant. sh_audio->sample_format indicates the sample
size already.
The TV code is a bit strange: the redundant sample size was part of the
internal TV interface. Assume it's really redundant and not something
else. The PCM decoder ignores the sample size anyway.
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
Make the VF/VO/AO option parser available to audio filters. No audio
filter uses this yet, but it's still a quite intrusive change.
In particular, the commands for manipulating filters at runtime
completely change. We delete the old code, and use the same
infrastructure as for video filters. (This forces complete
reinitialization of the filter chain, which hopefully isn't a problem
for any use cases. The old code forced reinitialization too, but it
could potentially allow a filter to cache things; e.g. consider loaded
ladspa plugins and such.)
This is not directly related to the handling of format changes itself,
but playing audio normally after the change. This was broken: the output
byte rate was not recalculated, so audio-video sync was simply broken.
Fix this by calculating the byte rate on the fly, instead of storing it
in sh_audio.
Format changes are relatively common (switches between stereo and 5.1
in TV recordings), so this fixes a somewhat critical bug.
Partial packet reads were needed because the video/audio parsers were
working on top of them. So it could happen that a parser read a part of
a packet, and returned that to the decoder. With libavformat/libavcodec,
packets are already parsed, and everything is much simpler.
Most of the simplifications in ad_spdif could have been done earlier.
Remove some other stuff as well, like the questionable slave mode start
time reporting (could be replaced by proper code, but we don't bother).
Remove the unused skip_audio_frame() functionality as well (it was used
by old demuxers). Some functions become private to demux.c, like
demux_fill_buffer(). Introduce new packet read functions, which have
simpler semantics. Packets returned from them are owned by the caller,
and all packets in the demux.c packet queue are considered unread.
Remove special code that dropped subtitle packets with size 0. This
used to be needed because it caused special cases in the old code.
Delete demux_avi, demux_asf, demux_mpg, demux_ts. libavformat does
better than them (except in rare corner cases), and the demuxers have
a bad influence on the rest of the code. Often they don't output
proper packets, and require additional audio and video parsing. Most
work only in --no-correct-pts mode.
Remove them to facilitate further cleanups.
Whatever this was supposed to be originally, it doesn't have much value
anymore. It just forced ad_mpg123 to upmix mono to stereo by default
(the audio chain can do that). As an option, it was mostly useless and
misleading, so get rid of it.
This helps passing the channel layout correctly from decoder to audio
filter chain. (Because that part "reuses" the demuxer level codec
parameters, which is very disgusting.)
Note that ffmpeg stuff already passed the channel layout via
mp_copy_lav_codec_headers(). So other than easier dealing with the
demuxer/decoder parameters mess, there's no real advantage to doing
this.
Make the --channels option accept a channel map. Since simple numbers
map to standard layouts with the given number of channels, this is
downwards compatible. Likewise for demux_rawaudio.
This actually breaks audio for 5/6/8 channels. There's no reordering
done yet. The actual reordering will be done inside of af_lavrresample
and has to be made part of the format negotiation.
mp_audio has some redundant fields. Setters like mp_audio_set_format()
initialize these properly.
Also move the mp_audio struct to a the file audio.c.
We can remove a mysterious line of code from af.c:
in.format |= af_bits2fmt(in.bps * 8);
I'm not sure if this was ever actually needed, or if it was some kind of
"make it work" quick-fix that works against the way things were supposed
to work. All filters etc. now set the format correctly, so if there ever
was a need for this code, it's definitely gone.
Add dummy input and output filters to remove special cases in the format
negotiation code (af_fix_format_conversion() etc.). The output of the
filter chain is now negotiated in exactly the same way as normal
filters.
Negotiate setting the sample rate in the same way as other audio
parameters. As a side effect, the resampler is inserted at the start of
the filter chain instead of the end, but that shouldn't matter much,
especially since conversion and channel mixing are conflated into the
same filter (due to libavresample's API).
Anything this option did has been removed in the preceding 3 commits.
Note that even though these options sounded like a good idea (like
setting accuracy vs. speed tradeoffs), they were not really properly
implemented.
The only thing this option did was changing the behavior of af_volume.
The option decided what sample format af_volume would use, but only if
the sample format was not already float. If the option was set, it would
default to float, otherwise to S16.
Remove use of the option and all associated code, and make af_volume
always use float (unless a af_volume specific sub-option is set).
Silence maximum value tracking. This message is printed when the filter
is destroyed, and it's slightly annoying. Was enabled due to enabling
float by default.
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
Reinitialize sh_audio->samplesize and sample_format before falling back
to another audio decoder (some decoders rely on default values). Remove
code setting these fields from demux_mkv and demux_lavf (no decoder
should depend on demuxer-set values for these fields).
Conflicts:
audio/decode/ad_lavc.c
Merged from mplayer2 commit 6b9567. The changes to ad_lavc.c are not
merged, as they are very specific to the mplayer2 libavresample hack;
we deplanarize manually, so we can't get unsupported sample formats
yet (except on raw audio with "pcm_f64le", as we don't support
AV_SAMPLE_FMT_DBL in the audio chain).
When a video filter returned inf as PTS, the player crashed. One
reason for this was that decode_audio() was called with a negative
minlen parameter, which at some point caused it to call a memory
allocation function with a ridiculous value, triggering an out of
memory code path in talloc.c. (talloc.c has been modified to abort()
on out of memory situations.)
Fix this by sanity checking minlen in decode_audio(). (The check
against outbuf->len always succeeded, because it's an unsigned
comparison.)
Make an existing sanity check in mplayer.c more robust: check for NaN
too, which happens if the video PTS is inf.
This happened with "-vf pullup,softpulldown" (but is not triggered when
the following commit is applied).
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
