Because there can be several default multiplexers (without name), they are now
reported with the name "<default>". And a message warns they cannot be
referenced with the "proto" keyword on a bind line or a server line.
Multiplexers are not necessarily associated to an ALPN. ALPN is a TLS extension,
so it is not always defined or used. Instead, we now rather speak of
multiplexer's protocols. So in this patch, there are no significative changes,
some structures and functions are just renamed.
This function is generic and is able to automatically transfer data from a
buffer to the conn_stream's tx buffer. It does this automatically if the mux
doesn't define another snd_buf() function.
It cannot yet be used as-is with the conn_stream's txbuf without risking to
lose data on close since conn_streams need to be orphaned for this.
To be symmetrical with the recv() part, we no handle retryable and partial
transmission using a intermediary buffer in the conn_stream. For now it's only
set to BUF_NULL and never allocated nor used.
It cannot yet be used as-is without risking to lose data on close since
conn_streams need to be orphaned for this.
This function is generic and is able to automatically transfer data
from a conn_stream's rx buffer to the destination buffer. It does this
automatically if the mux doesn't define another rcv_buf() function.
In order to reorganize the connection layers, recv() operations will
need to be retryable and to support partial transfers. This requires
an intermediary buffer to hold the data coming from the mux. After a
few attempts, it turns out that this buffer is best placed inside the
conn_stream itself. For now it's only set to buf_empty and it will be
up to the caller to allocate it if required.
This new function wl_set_waitcb() prepopulates a wait_list with a tasklet
and a context and returns it so that it can be passed to ->subscribe() to
be added to a connection or conn_stream's wait_list. The caller doesn't
need to know all the insiders details anymore this way.
Totally nuke the "send" method, instead, the upper layer decides when it's
time to send data, and if it's not possible, uses the new subscribe() method
to be called when it can send data again.
Add a new "subscribe" method for connection, conn_stream and mux, so that
upper layer can subscribe to them, to be called when the event happens.
Right now, the only event implemented is "SUB_CAN_SEND", where the upper
layer can register to be called back when it is possible to send data.
The connection and conn_stream got a new "send_wait_list" entry, which
required to move a few struct members around to maintain an efficient
cache alignment (and actually this slightly improved performance).
In some cases, we call cs_destroy() very early, so early the connection
doesn't yet have a mux, so we can't call mux->detach(). In this case,
just destroy the associated connection.
This should be backported to 1.8.
fd_insert() is currently called just after setting the owner and iocb,
but proceeding like this prevents the operation from being atomic and
requires a lock to protect the maxfd computation in another thread from
meeting an incompletely initialized FD and computing a wrong maxfd.
Fortunately for now all fdtab[].owner are set before calling fd_insert(),
and the first lock in fd_insert() enforces a memory barrier so the code
is safe.
This patch moves the initialization of the owner and iocb to fd_insert()
so that the function will be able to properly arrange its operations and
remain safe even when modified to become lockless. There's no other change
beyond the internal API.
Since commit f9ce57e ("MEDIUM: connection: make conn_sock_shutw() aware
of lingering"), we refrain from performing the shutw() on the socket if
there is no lingering risk. But there is a problem with this in tunnel
and in TCP modes where a client is explicitly allowed to send a shutw
to the server, eventhough it it risky.
Not doing it creates this situation reported by Ricardo Fraile and
diagnosed by Christopher : a typical HTTP client (eg: curl) connecting
via the config below to an HTTP server would receive its response,
immediately close while the server remains in keep-alive mode. The
shutr() received by haproxy from the client is "propagated" to the
server side but not acted upon because fdtab[fd].linger_risk is set,
so we expect that the next close will immediately complete this
operation.
listen proxy-tcp
bind 127.0.0.1:8888
mode tcp
timeout connect 5s
timeout server 10s
timeout client 10s
server server1 127.0.0.1:8000
But since the whole stream will not end until the server closes in
turn, the server doesn't close and haproxy expires on server timeout.
This problem has already struck by waking up an older bug and was
partially fixed with commit 8059351 ("BUG/MEDIUM: http: don't disable
lingering on requests with tunnelled responses") though it was not
enough.
The problem is that linger_risk is not suited here. In fact we need to
know whether or not it is desired to close normally or silently, and
whether or not a shutr() has already been received on this connection.
This is the approach this patch takes, and it solves the problem for
the various difficult modes (tcp, http-server-close, pretend-keepalive).
This fix needs to be backported to 1.8. Many thanks to Ricardo for
providing very detailed traces and configurations.
During the migration to the second version of the pools, the new
functions and pool pointers were all called "pool_something2()" and
"pool2_something". Now there's no more pool v1 code and it's a real
pain to still have to deal with this. Let's clean this up now by
removing the "2" everywhere, and by renaming the pool heads
"pool_head_something".
It can happen that we want to read early data, write some, and then continue
reading them.
To do so, we can't reuse tmp_early_data to store the amount of data sent,
so introduce a new member.
If we read early data, then ssl_sock_to_buf() is now the only responsible
for getting back to the handshake, to make sure we don't miss any early data.
This callback will be used to release upper layers when a mux is in
use. Given that the mux can be asynchronously deleted, we need a way
to release the extra information such as the session.
This callback will be called directly by the mux upon releasing
everything and before the connection itself is released, so that
the callee can find its information inside the connection if needed.
The way it currently works is not perfect, and most likely this should
instead become a mux release callback, but for now we have no easy way
to add mux-specific stuff, and since there's one mux per connection,
it works fine this way.
For H2, only the mux's timeout or other conditions might cause a
release of the mux and the connection, no stream should be allowed
to kill such a shared connection. So a stream will only detach using
cs_destroy() which will call mux->detach() then free the cs.
For now it's only handled by mux_pt. The goal is that the data layer
never has to care about the connection, which will have to be released
depending on the mux's mood.
This basically calls cs_shutw() followed by cs_shutr(). Both of them
are called in the most conservative mode so that any previous call is
still respected. The CS flags are cleared so that it can be reused
(this is important for connection retries when conn and CS are reused
without being reallocated).
All the references to connections in the data path from streams and
stream_interfaces were changed to use conn_streams. Most functions named
"something_conn" were renamed to "something_cs" for this. Sometimes the
connection still is what matters (eg during a connection establishment)
and were not always renamed. The change is significant and minimal at the
same time, and was quite thoroughly tested now. As of this patch, all
accesses to the connection from upper layers go through the pass-through
mux.
Most of the functions dealing with conn_streams are here. They act at
the data layer and interact with the mux. For now they are not used yet
but everything builds.
This patch introduces a new struct conn_stream. It's the stream-side of
a multiplexed connection. A pool is created and destroyed on exit. For
now the conn_streams are not used at all.
When an incoming connection is made on an HTTP mode frontend, the
session now looks up the mux to use based on the ALPN token and the
proxy mode. This will allow easier mux registration, and we don't
need to hard-code the mux_pt_ops anymore.
Selecting a mux based on ALPN and the proxy mode will quickly become a
pain. This commit provides new functions to register/lookup a mux based
on the ALPN string and the proxy mode to make this easier. Given that
we're not supposed to support a wide range of muxes, the lookup should
not have any measurable performance impact.
For HTTP/2 and QUIC, we'll need to deal with multiplexed streams inside
a connection. After quite a long brainstorming, it appears that the
connection interface to the existing streams is appropriate just like
the connection interface to the lower layers. In fact we need to have
the mux layer in the middle of the connection, between the transport
and the data layer.
A mux can exist on two directions/sides. On the inbound direction, it
instanciates new streams from incoming connections, while on the outbound
direction it muxes streams into outgoing connections. The difference is
visible on the mux->init() call : in one case, an upper context is already
known (outgoing connection), and in the other case, the upper context is
not yet known (incoming connection) and will have to be allocated by the
mux. The session doesn't have to create the new streams anymore, as this
is performed by the mux itself.
This patch introduces this and creates a pass-through mux called
"mux_pt" which is used for all new connections and which only
calls the data layer's recv,send,wake() calls. One incoming stream
is immediately created when init() is called on the inbound direction.
There should not be any visible impact.
Note that the connection's mux is purposely not set until the session
is completed so that we don't accidently run with the wrong mux. This
must not cause any issue as the xprt_done_cb function is always called
prior to using mux's recv/send functions.
When compiled with Openssl >= 1.1.1, before attempting to do the handshake,
try to read any early data. If any early data is present, then we'll create
the session, read the data, and handle the request before we're doing the
handshake.
For this, we add a new connection flag, CO_FL_EARLY_SSL_HS, which is not
part of the CO_FL_HANDSHAKE set, allowing to proceed with a session even
before an SSL handshake is completed.
As early data do have security implication, we let the origin server know
the request comes from early data by adding the "Early-Data" header, as
specified in this draft from the HTTP working group :
https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-replay
This one may be called by upper layers (eg: si_shutw()) or lower layers
(si_shutw() as well during stream_int_notify()) so we want it to take
care of updating the connection's flags if it's not going to be done
by the caller.
In transport-layer functions (snd_buf/rcv_buf), it's very problematic
never to know if polling changes made to the connection will be propagated
or not. This has led to some conn_cond_update_polling() calls being placed
at a few places to cover both the cases where the function is called from
the upper layer and when it's called from the lower layer. With the arrival
of the MUX, this becomes even more complicated, as the upper layer will not
have to manipulate anything from the connection layer directly and will not
have to push such updates directly either. But the snd_buf functions will
need to see their updates committed when called from upper layers.
The solution here is to introduce a connection flag set by the connection
handler (and possibly any other similar place) indicating that the caller
is committed to applying such changes on return. This way, the called
functions will be able to apply such changes by themselves before leaving
when the flag is not set, and the upper layer will not have to care about
that anymore.
This flag is only used when reading using splicing for now, and is only
set when a pipe full condition is met, so we can simplify its reset
condition in conn_refresh_polling_flags so that it's cleared at the
same time as the other ones, only when the control layer is ready.
This flag could be used more, to mark that a buffer full condition was
met with any receive method in order to simplify polling management.
This should probably be revisited after 1.8.
Now only conn_full_close() will be used. It will become more obvious
when the tracking is in place or not and will make it easier to
convert remaining call places to conn_streams.
Instead of having to manually handle lingering outside, let's make
conn_sock_shutw() check for it before calling shutdown(). We simply
don't want to emit the FIN if we're going to reset the connection
due to lingering. It's particularly important for silent-drop where
it's absolutely mandatory that no packet leaves the machine.
These flags are not exactly for the data layer, they instead indicate
what is expected from the transport layer. Since we're going to split
the connection between the transport and the data layers to insert a
mux layer, it's important to have a clear idea of what each layer does.
All function conn_data_* used to manipulate these flags were renamed to
conn_xprt_*.
After careful inspection, this flag is set at exactly two places :
- once in the health-check receive callback after receipt of a
response
- once in the stream interface's shutw() code where CF_SHUTW is
always set on chn->flags
The flag was checked in the checks before deciding to send data, but
when it is set, the wake() callback immediately closes the connection
so the CO_FL_SOCK_WR_SH flag is also set.
The flag was also checked in si_conn_send(), but checking the channel's
flag instead is enough and even reveals that one check involving it
could never match.
So it's time to remove this flag and replace its check with a check of
CF_SHUTW in the stream interface. This way each layer is responsible
for its shutdown, this will ease insertion of the mux layer.
This flag is both confusing and wrong. It is supposed to report the
fact that the data layer has received a shutdown, but in fact this is
reported by CO_FL_SOCK_RD_SH which is set by the transport layer after
this condition is detected. The only case where the flag above is set
is in the stream interface where CF_SHUTR is also set on the receiving
channel.
In addition, it was checked in the health checks code (while never set)
and was always test jointly with CO_FL_SOCK_RD_SH everywhere, except in
conn_data_read0_pending() which incorrectly doesn't match the second
time it's called and is fortunately protected by an extra check on
(ic->flags & CF_SHUTR).
This patch gets rid of the flag completely. Now conn_data_read0_pending()
accurately reports the fact that the transport layer has detected the end
of the stream, regardless of the fact that this state was already consumed,
and the stream interface watches ic->flags&CF_SHUTR to know if the channel
was already closed by the upper layer (which it already used to do).
The now unused conn_data_read0() function was removed.
The ->init() callback of the connection's data layer was only used to
complete the session's initialisation since sessions and streams were
split apart in 1.6. The problem is that it creates a big confusion in
the layers' roles as the session has to register a dummy data layer
when waiting for a handshake to complete, then hand it off to the
stream which will replace it.
The real need is to notify that the transport has finished initializing.
This should enable a better splitting between these layers.
This patch thus introduces a connection-specific callback called
xprt_done_cb() which informs about handshake successes or failures. With
this, data->init() can disappear, CO_FL_INIT_DATA as well, and we don't
need to register a dummy data->wake() callback to be notified of errors.
Till now connections used to rely exclusively on file descriptors. It
was planned in the past that alternative solutions would be implemented,
leading to member "union t" presenting sock.fd only for now.
With QUIC, the connection will need to continue to exist but will not
rely on a file descriptor but a connection ID.
So this patch introduces a "connection handle" which is either a file
descriptor or a connection ID, to replace the existing "union t". We've
now removed the intermediate "struct sock" which was never used. There
is no functional change at all, though the struct connection was inflated
by 32 bits on 64-bit platforms due to alignment.
If a server presents an unexpected certificate to haproxy, that is, a
certificate that doesn't match the expected name as configured in
verifyhost or as requested using SNI, we want to store that precious
information. Fortunately we have access to the connection in the
verification callback so it's possible to store an error code there.
For this purpose we use CO_ER_SSL_MISMATCH_SNI (for when the cert name
didn't match the one requested using SNI) and CO_ER_SSL_MISMATCH for
when it doesn't match verifyhost.
This will be used to retrieve the ALPN negociated over SSL (or possibly
via the proxy protocol later). It's likely that this information should
be stored in the connection itself, but it requires adding an extra
pointer and an extra integer. Thus better rely on the transport layer
to pass this info for now.
Very early in the connection rework process leading to v1.5-dev12, commit
56a77e5 ("MEDIUM: connection: complete the polling cleanups") marked the
end of use for this flag which since was never set anymore, but it continues
to be tested. Let's kill it now.
This patch adds the support of a maximum of 32 engines
in async mode.
Some tests have been done using 2 engines simultaneously.
This patch also removes specific 'async' attribute from the connection
structure. All the code relies only on Openssl functions.
ssl-mode-async is a global configuration parameter which enables
asynchronous processing in OPENSSL for all SSL connections haproxy
handles. With SSL_MODE_ASYNC set, TLS I/O operations may indicate a
retry with SSL_ERROR_WANT_ASYNC with this mode set if an asynchronous
capable engine is used to perform cryptographic operations. Currently
async mode only supports one async-capable engine.
This is the latest version of the patchset which includes Emeric's
updates :
- improved async fd cleaning when openssl reports an fd to delete
- prevent conn_fd_handler from calling SSL_{read,write,handshake} until
the async fd is ready, as these operations are very slow and waste CPU
- postpone of SSL_free to ensure the async operation can complete and
does not cause a dereference a released SSL.
- proper removal of async fd from the fdtab and removal of the unused async
flag.
There are still a lot of #ifdef USE_OPENSSL in the code (still 43
occurences) because we never know if we can directly access ssl_sock
or not. This patch attacks the problem differently by providing a
way for transport layers to register themselves and for users to
retrieve the pointer. Unregistered transport layers will point to NULL
so it will be easy to check if SSL is registered or not. The mechanism
is very inexpensive as it relies on a two-entries array of pointers,
so the performance will not be affected.
Commit 5fddab0 ("OPTIM: stream_interface: disable reading when
CF_READ_DONTWAIT is set") improved the connection layer's efficiency
back in 1.5-dev13 by avoiding successive read attempts on an active
FD. But by disabling this on a polled FD, it causes an unpleasant
side effect which is that the FD that was subscribed to polling is
suddenly stopped and may need to be re-enabled once the kernel
starts to slow down on data eviction (eg: saturated server at the
other end, bursty traffic caused by too large maxpollevents).
This behaviour is observable with persistent connections when there
is a large enough connection count so that there's no data in the
early connection and polling is required, because there are then
up to 4 epoll_ctl() calls per request. It's important that the
server is slower than haproxy to cause some delays when reading
response.
The current connection layer as designed in 1.6 with the FD cache
doesn't require this trick anymore, though it still benefits from
it when it saves an FD from being uselessly polled. But compared
to the increased cost of enabling and disabling poll all the time,
it's still better to disable it. In some cases it's possible to
observe a performance increase as high as 30% by avoiding this
epoll_ctl() dance.
In the end we only want to disable it when the FD is speculatively
read and not when it's polled. For this we introduce a new function
__conn_data_done_recv() which is used to indicate that we're done
with recv() and not interested in new attempts. If/when we later
support event-triggered epoll, this function will have to change
a bit to do the same even in the polled case.
A quick test with keep-alive requests run on a dual-core / dual-
thread Atom shows a significant improvement :
single process, 0 bytes :
before: Requests per second: 12243.20 [#/sec] (mean)
after: Requests per second: 13354.54 [#/sec] (mean)
single process, 4k :
before: Requests per second: 9639.81 [#/sec] (mean)
after: Requests per second: 10991.89 [#/sec] (mean)
dual process, 0 bytes (unstable) :
before: Requests per second: 16900-19800 ~ 17600 [#/sec] (mean)
after: Requests per second: 18600-21400 ~ 20500 [#/sec] (mean)
These functions will be needed by "show sess" on the CLI, let's make them
globally available. It's important to note that due to the fact that we
still do not set the data and transport layers' names in the structures,
we still have to rely on some exports just to match the pointers. This is
ugly but is preferable to adding many includes since the short-term goal
is to get rid of these tests by having proper names in place.
Setting an FD to -1 when closed isn't the most easily noticeable thing
to do when we're chasing accidental reuse of a stale file descriptor.
Instead set it to that large a negative value that it will overflow the
fdtab and provide an analysable core at the moment the issue happens.
Care was taken to ensure it doesn't overflow nor change sign on 32-bit
machines when multiplied by fdtab, and that it also remains negative for
the various checks that exist. The value equals 0xFDDEADFD which happens
to be easily spotted in a debugger.
The bug described in commit 568743a ("BUG/MEDIUM: stream-int: completely
detach connection on connect error") was not a stream-interface layer bug
but a connection layer bug. There was exactly one place in the code where
we could change a file descriptor's status without first checking whether
it is valid or not, it was in conn_stop_polling(). This one is called when
the polling status is changed after an update, and calls fd_stop_both even
if we had already closed the file descriptor :
1479388298.484240 ->->->->-> conn_fd_handler > conn_cond_update_polling
1479388298.484240 ->->->->->-> conn_cond_update_polling > conn_stop_polling
1479388298.484241 ->->->->->->-> conn_stop_polling > conn_ctrl_ready
1479388298.484241 conn_stop_polling < conn_ctrl_ready
1479388298.484241 ->->->->->->-> conn_stop_polling > fd_stop_both
1479388298.484242 ->->->->->->->-> fd_stop_both > fd_update_cache
1479388298.484242 ->->->->->->->->-> fd_update_cache > fd_release_cache_entry
1479388298.484242 fd_update_cache < fd_release_cache_entry
1479388298.484243 fd_stop_both < fd_update_cache
1479388298.484243 conn_stop_polling < fd_stop_both
1479388298.484243 conn_cond_update_polling < conn_stop_polling
1479388298.484243 conn_fd_handler < conn_cond_update_polling
The problem with the previous fix above is that it break the http_proxy mode
and possibly even some Lua parts and peers to a certain extent ; all outgoing
connections where the target address is initially copied into the outgoing
connection which experience a retry would use a random outgoing address after
the retry because closing and detaching the connection causes the target
address to be lost. This was attempted to be addressed by commit 0857d7a
("BUG/MAJOR: stream: properly mark the server address as unset on connect
retry") but it used to only solve the most visible effect and not the root
cause.
Prior to this fix, it was possible to cause this config to keep CLOSE_WAIT
for as long as it takes to expire a client or server timeout (note the
missing client timeout) :
listen test
mode http
bind :8002
server s1 127.0.0.1:8001
$ tcploop 8001 L0 W N20 A R P100 S:"HTTP/1.1 200 OK\r\nContent-length: 0\r\n\r\n" &
$ tcploop 8002 N200 C T W S:"GET / HTTP/1.0\r\n\r\n" O P10000 K
With this patch, these CLOSE_WAIT properly vanish when both processes leave.
This commit reverts the two fixes above and replaces them with the proper
fix in connection.h. It must be backported to 1.6 and 1.5. Thanks to
Robson Roberto Souza Peixoto for providing very detailed traces showing
some obvious inconsistencies leading to finding this bug.
When NetScaler application switch is used as L3+ switch, informations
regarding the original IP and TCP headers are lost as a new TCP
connection is created between the NetScaler and the backend server.
NetScaler provides a feature to insert in the TCP data the original data
that can then be consumed by the backend server.
Specifications and documentations from NetScaler:
https://support.citrix.com/article/CTX205670https://www.citrix.com/blogs/2016/04/25/how-to-enable-client-ip-in-tcpip-option-of-netscaler/
When CIP is enabled on the NetScaler, then a TCP packet is inserted just after
the TCP handshake. This is composed as:
- CIP magic number : 4 bytes
Both sender and receiver have to agree on a magic number so that
they both handle the incoming data as a NetScaler Client IP insertion
packet.
- Header length : 4 bytes
Defines the length on the remaining data.
- IP header : >= 20 bytes if IPv4, 40 bytes if IPv6
Contains the header of the last IP packet sent by the client during TCP
handshake.
- TCP header : >= 20 bytes
Contains the header of the last TCP packet sent by the client during TCP
handshake.
There's quite some inconsistency in the internal API. listener_accept()
which is the main accept() function returns void but is declared as int
in the include file. It's assigned to proto->accept() for all stream
protocols where an int is expected but the result is never checked (nor
is it documented by the way). This proto->accept() is in turn assigned
to fd->iocb() which is supposed to return an int composed of FD_WAIT_*
flags, but which is never checked either.
So let's fix all this mess :
- nobody checks accept()'s return
- nobody checks iocb()'s return
- nobody sets a return value
=> let's mark all these functions void and keep the current ones intact.
Additionally we now include listener.h from listener.c to ensure we won't
silently hide this incoherency in the future.
Note that this patch could/should be backported to 1.6 and even 1.5 to
simplify debugging sessions.
This list member will be used to attach a connection to a list of
idle, reusable or queued connections. It's unused for now. Given
that it's not expected to be used more than a few times per session,
the member was put after the target, in the area starting at the
second cache line of the structure.
It's now called conn_sock_drain() to make it clear that it only reads
at the sock layer and not at the data layer. The function was too big
to remain inlined and it's used at a few places where size counts.
Currently si_idle_conn_null_cb() has to perform some low-level checks
over the file descriptor and the connection configuration that should
only belong to conn_drain(). Let's move these controls there. The
function now automatically checks for errors and hangups on the file
descriptor for example, and disables recv polling if there's no drain
function at the control layer.
This function is an equivalent to send() which operates over a connection
instead of a file descriptor. It checks that the control layer is ready
and that it's allowed to send. If automatically enables polling if it
cannot send. It simplifies the return checks by returning zero in all
cases where it cannot send so that the caller only has to care about
negative values indicating errors.
This will save callers from having to care about conn->xprt and xprt->shutw.
Note that shutw() takes a second argument indicating whether it's a clean or
a hard shutw. This is used by SSL which tries to close cleanly in most cases.
Here we provide two versions, conn_data_shutw() which performs the clean
close, and conn_data_shutw_hard() which does the unclean one.
This function was not used yet and was only supposed to mark the connection
as shutdown for write. Unfortunately at other places in stream_interface.c,
we're seeing a bit of layering violations with attempts to perform the shutdown
on the fd directly. Let's make this function call shutdown() itself so that
the callers only have to care about the connection.
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
This commit modifies the PROXY protocol V2 specification to support headers
longer than 255 bytes allowing for optional extensions. It implements the
PROXY protocol V2 which is a binary representation of V1. This will make
parsing more efficient for clients who will know in advance exactly how
many bytes to read. Also, it defines and implements some optional PROXY
protocol V2 extensions to send information about downstream SSL/TLS
connections. Support for PROXY protocol V1 remains unchanged.
Using the previous callback, it's trivial to block the heartbeat attack,
first we control the message length, then we emit an SSL error if it is
out of bounds. A special log is emitted, indicating that a heartbleed
attack was stopped so that they are not confused with other failures.
That way, haproxy can protect itself even when running on an unpatched
SSL stack. Tests performed with openssl-1.0.1c indicate a total success.
Users have seen a huge increase in the rate of SSL handshake failures
starting from 2014/04/08 with the release of the Heartbleed OpenSSL
vulnerability (CVE-2014-0160). Haproxy can detect that a heartbeat
was received in the incoming handshake, and such heartbeats are not
supposed to be common, so let's log a different message when a
handshake error happens after a heartbeat is detected.
This patch only adds the new message and the new code.
It's easier and safer to rely on conn_xprt_ready() everywhere than to
check the flag itself. It will also simplify adding extra checks later
if needed. Some useless controls for !xprt have been removed, as the
XPRT_READY flag itself guarantees xprt is set.
It's easier and safer to rely on conn_ctrl_ready() everywhere than to
check the flag itself. It will also simplify adding extra checks later
if needed. Some useless controls for !ctrl have been removed, as the
CTRL_READY flag itself guarantees ctrl is set.
We simply remove these functions and replace their calls with the
appropriate ones :
- if we're in the data phase, we can simply report wait on the FD
- if we're in the socket phase, we may also have to signal the
desire to read/write on the socket because it might not be
active yet.
These flags were used to report the readiness of the file descriptor.
Now this readiness is directly checked at the file descriptor itself.
This removes the need for constantly synchronizing updates between the
file descriptor and the connection and ensures that all layers share
the same level of information.
For now, the readiness is updated in conn_{sock,data}_poll_* by directly
touching the file descriptor. This must move to the lower layers instead
so that these functions can disappear as well. In this state, the change
works but is incomplete. It's sensible enough to avoid making it more
complex.
Now the sock/data updates become much simpler because they just have to
enable/disable access to a file descriptor and not to care anymore about
its readiness.
This commit heavily changes the polling system in order to definitely
fix the frequent breakage of SSL which needs to remember the last
EAGAIN before deciding whether to poll or not. Now we have a state per
direction for each FD, as opposed to a previous and current state
previously. An FD can have up to 8 different states for each direction,
each of which being the result of a 3-bit combination. These 3 bits
indicate a wish to access the FD, the readiness of the FD and the
subscription of the FD to the polling system.
This means that it will now be possible to remember the state of a
file descriptor across disable/enable sequences that generally happen
during forwarding, where enabling reading on a previously disabled FD
would result in forgetting the EAGAIN flag it met last time.
Several new state manipulation functions have been introduced or
adapted :
- fd_want_{recv,send} : enable receiving/sending on the FD regardless
of its state (sets the ACTIVE flag) ;
- fd_stop_{recv,send} : stop receiving/sending on the FD regardless
of its state (clears the ACTIVE flag) ;
- fd_cant_{recv,send} : report a failure to receive/send on the FD
corresponding to EAGAIN (clears the READY flag) ;
- fd_may_{recv,send} : report the ability to receive/send on the FD
as reported by poll() (sets the READY flag) ;
Some functions are used to report the current FD status :
- fd_{recv,send}_active
- fd_{recv,send}_ready
- fd_{recv,send}_polled
Some functions were removed :
- fd_ev_clr(), fd_ev_set(), fd_ev_rem(), fd_ev_wai()
The POLLHUP/POLLERR flags are now reported as ready so that the I/O layers
knows it can try to access the file descriptor to get this information.
In order to simplify the conditions to add/remove cache entries, a new
function fd_alloc_or_release_cache_entry() was created to be used from
pollers while scanning for updates.
The following pollers have been updated :
ev_select() : done, built, tested on Linux 3.10
ev_poll() : done, built, tested on Linux 3.10
ev_epoll() : done, built, tested on Linux 3.10 & 3.13
ev_kqueue() : done, built, tested on OpenBSD 5.2
It is quite often that an connection error only reports "socket error" with
no more information. This is especially problematic with health checks where
many causes are possible, including resource exhaustion which do not lead to
a valid errno code. So let's add explicit codes to cover these cases.
Till now there was no way to know from a connection if a previous
call to drain() had done any change. This function is used to drain
incoming data and to update the connection's flags at the same time.
It also correctly sets the polling flags on the connection if the
drain function indicates inability to receive. This function will
be used preferably over ctrl->drain() when a connection is used.
When allocating a new connection, only the caller knows whether it's
acceptable to reuse the previous one or not. Let's pass this information
to si_alloc_conn() which will do the cleanup if the connection is not
acceptable.
Right now we see many places doing their own setsockopt(SO_LINGER).
Better only do it just before the close() in fd_delete(). For this
we add a new flag on the file descriptor, indicating if it's safe or
not to linger. If not (eg: after a connect()), then the setsockopt()
call is automatically performed before a close().
The flag automatically turns to safe when receiving a read0.
conn_xprt_ready() reports if the transport layer is ready.
conn_ctrl_ready() reports if the control layer is ready.
The stream interface uses si_conn_ready() to report that the
underlying connection is ready. This will be used for connection
reuse in keep-alive mode.
We used to have two very similar functions for sending a PROXY protocol
line header. The reason is that the default one relies on the stream
interface to retrieve the other end's address, while the "local" one
performs a local address lookup and sends that instead (used by health
checks).
Now that the send_proxy_ofs is stored in the connection and not the
stream interface, we can make the local_send_proxy rely on it and
support partial sends. This also simplifies the code by removing the
local_send_proxy function, making health checks use send_proxy_ofs,
resulting in the removal of the CO_FL_LOCAL_SPROXY flag, and the
associated test in the connection handler. The other flag,
CO_FL_SI_SEND_PROXY was renamed without the "SI" part so that it
is clear that it is not dedicated anymore to a usage with a stream
interface.
Till now the send_proxy_ofs field remained in the stream interface,
but since the dynamic allocation of the connection, it makes a lot
of sense to move that into the connection instead of the stream
interface, since it will not be statically allocated for each
session.
Also, it turns out that moving it to the connection fils an alignment
hole on 64 bit architectures so it does not consume more memory, and
removing it from the stream interface was an opportunity to correctly
reorder fields and reduce the stream interface's size from 160 to 144
bytes (-10%). This is 32 bytes saved per session.
We don't want to assign the control nor transport layers anymore
at the same time as the data layer, because it prevents one from
keeping existing settings when reattaching a connection to an
existing stream interface.
Let's have conn_attach() replace conn_assign() for this purpose.
Thus, conn_prepare() + conn_attach() do exactly the same as the
previous conn_assign().
Now that we can assign conn->xprt regardless of the initialization state,
we can reintroduce conn_prepare() to set only the protocol, the transport
layer and initialize the transport layer's state.
Currently the control and transport layers of a connection are supposed
to be initialized when their respective pointers are not NULL. This will
not work anymore when we plan to reuse connections, because there is an
asymmetry between the accept() side and the connect() side :
- on accept() side, the fd is set first, then the ctrl layer then the
transport layer ; upon error, they must be undone in the reverse order,
then the FD must be closed. The FD must not be deleted if the control
layer was not yet initialized ;
- on the connect() side, the fd is set last and there is no reliable way
to know if it has been initialized or not. In practice it's initialized
to -1 first but this is hackish and supposes that local FDs only will
be used forever. Also, there are even less solutions for keeping trace
of the transport layer's state.
Also it is possible to support delayed close() when something (eg: logs)
tracks some information requiring the transport and/or control layers,
making it even more difficult to clean them.
So the proposed solution is to add two flags to the connection :
- CO_FL_CTRL_READY is set when the control layer is initialized (fd_insert)
and cleared after it's released (fd_delete).
- CO_FL_XPRT_READY is set when the control layer is initialized (xprt->init)
and cleared after it's released (xprt->close).
The functions have been adapted to rely on this and not on the pointers
anymore. conn_xprt_close() was unused and dangerous : it did not close
the control layer (eg: the socket itself) but still marks the transport
layer as closed, preventing any future call to conn_full_close() from
finishing the job.
The problem comes from conn_full_close() in fact. It needs to close the
xprt and ctrl layers independantly. After that we're still having an issue :
we don't know based on ->ctrl alone whether the fd was registered or not.
For this we use the two new flags CO_FL_XPRT_READY and CO_FL_CTRL_READY. We
now rely on this and not on conn->xprt nor conn->ctrl anymore to decide what
remains to be done on the connection.
In order not to miss some flag assignments, we introduce conn_ctrl_init()
to initialize the control layer, register the fd using fd_insert() and set
the flag, and conn_ctrl_close() which unregisters the fd and removes the
flag, but only if the transport layer was closed.
Similarly, at the transport layer, conn_xprt_init() calls ->init and sets
the flag, while conn_xprt_close() checks the flag, calls ->close and clears
the flag, regardless xprt_ctx or xprt_st. This also ensures that the ->init
and the ->close functions are called only once each and in the correct order.
Note that conn_xprt_close() does nothing if the transport layer is still
tracked.
conn_full_close() now simply calls conn_xprt_close() then conn_full_close()
in turn, which do nothing if CO_FL_XPRT_TRACKED is set.
In order to handle the error path, we also provide conn_force_close() which
ignores CO_FL_XPRT_TRACKED and closes the transport and the control layers
in turns. All relevant instances of fd_delete() have been replaced with
conn_force_close(). Now we always know what state the connection is in and
we can expect to split its initialization.
conn_new() will be a more convenient way of allocating and initializing
a connection. It calls pool_alloc2() and conn_init() upon success.
conn_free() is just a pool_free2() but is provided for symmetry with
conn_new().
Everywhere conn_prepare() is used, the call to conn_init() has already
been done. We can now safely replace all instances of conn_prepare()
with conn_assign() which does not reset the transport layer, and remove
conn_prepare().
This function will ease the initialization of new connections as well
as their reuse. It initializes the obj_type and a few fields so that
the connection is fresh again. It leaves the addresses and target
untouched so it is suitable for use across connection retries.
stream_int_chk_rcv_conn() did not clear connection flags before updating them. It
is unsure whether this could have caused the stalled transfers that have been
reported since dev15.
In order to avoid such further issues, we now use a simple inline function to do
all the job.
When the PROXY protocol header is expected and fails, leading to an
abort of the incoming connection, we now emit a log message. If option
dontlognull is set and it was just a port probe, then nothing is logged.
Since the introduction of SSL, it became quite annoying not to get any useful
info in logs about handshake failures. Let's improve reporting for embryonic
sessions by checking a per-connection error code and reporting it into the logs
if an error happens before the session is completely instanciated.
The "dontlognull" option is supported in that if a connection does not talk
before being aborted, nothing will be emitted.
At the moment, only timeouts are considered for SSL and the PROXY protocol,
but next patches will handle more errors.
Commit 0ffde2cc in 1.5-dev13 tried to always disable polling on file
descriptors when errors were encountered. Unfortunately it did not
always succeed in doing so because it relied on detecting polling
changes to disable it. Let's use a dedicated conn_stop_polling()
function that is inconditionally called upon error instead.
This managed to stop a busy loop observed when a health check makes
use of the send-proxy protocol and fails before the connection can
be established.
Several places got the connection close sequence wrong because it
was not obvious. In practice we always need the same sequence when
aborting, so let's have a common function for this.
Instead of storing a couple of (int, ptr) in the struct connection
and the struct session, we use a different method : we only store a
pointer to an integer which is stored inside the target object and
which contains a unique type identifier. That way, the pointer allows
us to retrieve the object type (by dereferencing it) and the object's
address (by computing the displacement in the target structure). The
NULL pointer always corresponds to OBJ_TYPE_NONE.
This reduces the size of the connection and session structs. It also
simplifies target assignment and compare.
In order to improve the generated code, we try to put the obj_type
element at the beginning of all the structs (listener, server, proxy,
si_applet), so that the original and target pointers are always equal.
A lot of code was touched by massive replaces, but the changes are not
that important.
Before connections were introduced, it was possible to connect an
external task to a stream interface. However it was left as an
exercise for the brave implementer to find how that ought to be
done.
The feature was broken since the introduction of connections and
was never fixed since due to lack of users. Better remove this dead
code now.
This is the first step of a series of changes aiming at making the
polling totally event-driven. This first change consists in only
remembering at the connection level whether an FD was enabled or not,
regardless of the fact it was being polled or cached. From now on, an
EAGAIN will always be considered as a change so that the pollers are
able to manage a cache and to flush it based on such events. One of
the noticeable effect is that conn_fd_handler() is called once more
per session (6 instead of 5 min) but other update functions are less
called.
Note that the performance loss caused by this change at the moment is
quite significant, around 2.5%, but the change is needed to have SSL
working correctly in all situations, even when data were read from the
socket and stored in the invisible cache, waiting for some room in the
channel's buffer.
We will need to be able to switch server connections on a session and
to keep idle connections. In order to achieve this, the preliminary
requirement is that the connections can survive the session and be
detached from them.
Right now they're still allocated at exactly the same place, so when
there is a session, there are always 2 connections. We could soon
improve on this by allocating the outgoing connection only during a
connect().
This current patch touches a lot of code and intentionally does not
change any functionnality. Performance tests show no regression (even
a very minor improvement). The doc has not yet been updated.
When we start logging SSL information, we need the SSL struct to be
present even past the conn_xprt_close() call. In order to achieve this,
we should use refcounting on the connection and the transport layer. At
the moment it's not worth using plain refcounting as only the logs require
this, so instead of real refcounting we just use a flag which will be set
by the log subsystem when SSL data need to be logged.
What happens then is that the xprt->close() call is ignored and the
transport layer is closed again during session_free(), after the log
line is emitted.
When calling conn_xprt_close(), we always clear the transport pointer
so that all transport layers leave the connection in the same state after
a close. This will also make it safer and cheaper to call conn_xprt_close()
multiple times if needed.
This callback sends a PROXY protocol line on the outgoing connection,
with the local and remote endpoint information. This is used for local
connections (eg: health checks) where the other end needs to have a
valid address and no connection is relayed.
It was previously in frontend.c but there is no reason for this anymore
considering that all the information involved is in the connection itself
only. Theorically this should be in the socket layer but we don't have
this yet.
We absolutely want to disable FD polling after an error is detected,
otherwise the data layer has to do it and it's far from being obvious
at these layers.
The way we did it was a bit tricky in conn_update_*_polling and
conn_*_polling_changes. However it has almost no impact on performance
and code size both for the fast and slow path.
We'll now be able to remove some flag updates in the stream interface.
The connection flags have progressively been added one after the other
and were not very well organized. Some of them are often used together
and a number of operations are performed on the DATA/SOCK ENA/POL flags.
Thus, they have been reorganized so that flags that work together are
close to each other (allows immediate operands on ARM) and that polling
changes can be detected with fewer operations using a simple shift and
xor. The handshakes are now the last ones so that it will be easier to
add new ones after without risking a collision. All activity-related
flags are also grouped together.
