Add Jpeg XL as a possible output format for screenshots, which
should make it possible to take fast screenshots with much better
quality than JPEG, or take lossless high-bit-depth screenshots
with lower file sizes than PNG.
- Say built-in which is more common than builtin
- Move "By default" because only the key to open the console is
customizable, and fix the punctuation and case of the sentence
- ` opens the console, not ´
- Remove the sentences that explains which user script console.lua is
based on since it's no longer relevant now that the console has been
part of mpv for over 2 years.
Now that a separate --cover-art-whitelist option exists, files like
cover.jpg are loaded even without setting --cover-art-auto to fuzzy, so
only load files that have exactly the media filename by default, since
fuzzy loading is probably more likely to load unwanted images than to
load cover art that the user intended to display, especially if you play
audio files with a short filename like a.mp3.
This allows more fine grained control over which cover art to load. With
--cover-art-auto=exact and --cover-art-whitelist=yes, you can now load
cover art with the exact media filename and the whitelisted filenames,
but not cover art that contains the media filename
(--cover-art-auto=fuzzy).
This adds a section to the documentation to explain how resuming
playback works, and in particular it explains how it affects which
playlist entry mpv starts playing from, since this feature was only
implied in the --playlist-start documentation.
It also groups the documentation of the watch later options together to
make them easier to find.
Variable Refresh Rate (VRR), aka Freesync or Adaptive Sync can be used
with DRM by setting the VRR_ENABLED property on a crtc if the
connector reports that it is VRR_CAPABLE. This is a useful feature
for us as it is common to play 24/25/50 fps content on displays that
are nominally locked to 60Hz. VRR can allow this content to play at
native framerates.
This is a simple change as we just need to check the capability
and set the enabled property if requested by the user. I've defaulted
it to disabled for now, but it might make sense to default to auto
in the long term.
The documentation's current discussion of hwdec usage is out of date,
and unnecessarily pessemistic when applied to modern hardware. The
reality is that modern APIs on modern hardware produce reasonable
results and there's no need to pretend otherwise. The current language
that tries to drive people away from using hwdecs at all leads to them
making bad choices when they do try to use it.
Let's also make it clearer that users should use vo=gpu with hwdecs
rather than vo=vaapi or vo=vdpau. Even the existing admonitions have
proven insufficient, so let's strengthen that language.
There are two major ways of going about this:
1. Expose the native ra_gl/ra_pl/ra_d3d11 objects to the pre-existing
hwdec mappers, and then add code in vo_gpu_next to rewrap those
ra_tex objects into pl_tex.
2. Wrap the underlying pl_opengl/pl_d3d11 into a ra_pl object and expose
it to the hwdec mappers, then directly use the resulting pl_tex.
I ultimately opted for approach 1 because it enables compatibility with
more hardware decoders, specifically including ones that use native
OpenGL calls currently. The second approach only really works with
cuda_vk and vaapi_pl.
I was initially hesitant to link to an external article from the manpage
but a lot of other places in the man page already do something like
this, and it really makes more sense to have this as a wiki article
rather than trying to keep the manpage up-to-date by hand, since this
evolves quickly and the two are expected to converge over time.
The stop-screensaver option is currently limited to a simple yes/no
option. While the no option does always disable mpv trying to stop the
screensaver, yes does not mean the screensaver is always stopped. The
screensaver will be enabled again depending on certain conditions (like
if the player is paused). Simply introduce a new value for this option,
always, which does exactly what the name implies: the screensaver will
always be disabled.
- Make it clearer that playback_only affects subprocess' behavior when
the playback of the current playlist entry terminates, rather than
when mpv quits.
- Explain when status is positive and when it is negative.
- Replace "exited gracefully" in status' and error_string's
documentation with "terminated normally" so it can't be misinterpreted
as exiting successfully.
- Reword the playback_only warning
We have a few examples with vf=rotate=90, but libavfilter's rotate
accepts radians - not degrees, so a value of 90 is valid but misleading
because it's not 90 degrees.
Change the value of 90 at those examples.
Also replace "vf-add=hflip" with "vf add hflip", since that example
lists commands, not options, to run.
When utils.get_user_path was added, the expand-path command didn't
exist. Now it does, so remove the C code, make it a trivial wrapper.
Keep this function for backward compat to not break scripts, but
technically it's not required anymore.
Currently the profile-restore field is intentionally omitted if it
holds the default value (i.e. no values are stored for the profile,
and trying to restore would only warn).
See m_config_get_profiles at command.c .
Changes:
- rewrite to use new internal MPV API;
- code refactoring;
- fix buffers size calculations;
- buffer set to auto;
- reset() - clean/reinit device only after errors;
Previously, the sub-visibility option changed the visibility of all
subtitles including secondary ones. This meant that it was not possible
to only display secondary subtitles while hiding the primary ones. This
modifies the sub-visibility option so that it only affects primary
subtitles which allows only secondary subtitles to be displayed.
This reverts commit 04f0b0abe4.
It's not a good idea to unify the names only for visibility, while
keeping secondary-* for everything else.
This needs a bit more thought before we allow secondary sub to be
visible on its own.
Adds --sub-visibility choices 'primary-only' for only displaying the
primary subtitle track, and 'secondary-only' for only displaying
secondary subtitle track.
Removes --secondary-sub-visibility and displays a message telling the
user to use --sub-visibility=yes/primary-only instead.
These changes make it so that the default 'sub-visibility' bind 'v'
cycles through all the 'sub-visibility' choices, 'no', 'yes',
'primary-only', and 'secondary-only'.
The AO provides a way for mpv to directly submit audio to the PipeWire
audio server.
Doing this directly instead of going through the various compatibility
layers provided by PipeWire has the following advantages:
* It reduces complexity of going through the compatibility layers
* It allows a richer integration between mpv and PipeWire
(for example for metadata)
* Some users report issues with the compatibility layers that to not
occur with the native AO
For now the AO is ordered after all the other relevant AOs, so it will
most probably not be picked up by default.
This is for the following reasons:
* Currently it is not possible to detect if the PipeWire daemon that mpv
connects to is actually driving the system audio.
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1835)
* It gives the AO time to stabilize before it is used by everyone.
Based-on-patch-by: Oschowa <oschowa@web.de>
Based-on-patch-by: Andreas Kempf <aakempf@gmail.com>
Helped-by: Ivan <etircopyhdot@gmail.com>
Useful to strip dolbyvision from the output, in cases where the user
does not want it applied. Doing this as a video filter gives users the
abiilty to easily toggle this stripping at runtime in a way that
properly propagates to any (potentially stateful) VO.
It also thematically fits the rest of the options in vf_format, which
are similarly concerned with modifying the video image parameters.
This merges the old desaturation control options into a single
enumeration, with the goal of both simplifying how these options work
and also making this list more extensible (including, notably, new
options only supported by vo_gpu_next).
For the hybrid option, I decided to port the (slightly tweaked) values
from libplacebo's pre-refactor defaults, rather than the old values we
had in mpv, to more visually match the look of the vo_gpu_next hybrid.
Merge --gamut-clipping and --gamut-warning into a single option,
--gamut-mapping-mode, better corresponding to the new vo_gpu_next APIs
and allowing us to easily extend this option as new modes are added in
the future.
Not all deprecated symbols were removed. Only three events were removed for now
since these are not used internally.
This bumps the library version to 2.0.
Previously OSD was always displayed on {ch,pl}_{next,prev} left-click,
and seekbar-hover-chapter was always enabled and with fixed format.
Now it can be controlled with:
- chapters_osd, playlist_osd: yes/no (only affects left-click).
- chapter_fmt: lua string.format template, or "no" to disable.
Fixes#4675
The audio rewrite in d27ad96542 originally
broke this ao. However, 0ac724f002 fixed
and the documentation was never updated to reflect that. OpenAL has
worked fine for a while not. Just remove this sentence.
Completely untested, since Linux still can't into HDR in 2021. Somebody
please make sure it works.
Technically covers #8219, since gpu-context=drm can be combined with
vo=gpu-next.
Looking at this again I'm not sure it does anything useful at all. The
man page entry is also wrong: `bicubic` is not affected, only
`bicubic_fast`, and those filters are not configurable anyways.
So this would only ever be a debugging option, and I don't see a
pressing need for it.
No interface-change.rst update because it only just got added anyways.
As discussed in #8799, this will eventually replace vo_gpu. However, it
is not yet complete. Currently missing:
- OpenGL contexts
- hardware decoding
- blend-subtitles=video
- VOCTRL_SCREENSHOT
However, it's usable enough to cover most use cases, and as such is
enough to start getting in some crucial testing.
mpv doesn't have other dot files in its config dir, and it also
shouldn't be "invisible".
The new name ~~/init.js now replaces ~~/.init.js
While mpv usually deprecates things before outright removing them,
in this case the old (dot) name is replaced without deprecation:
- It's a bad idea to execute hidden scripts, even if at a config dir,
and we don't want to do that for the next release cycle too.
- We warn if the old (dot) name exists and the new name doesn't,
which should be reasonably visible for affected users.
- It's likely niche enough to not cause too much pain.
If for some reason both names are needed, e.g. when using also an old
mpv versions, then the old name could be symlinked to the new one, or
simply have one line: `require("~~/init")` to load the new name, while
a new mpv version will load (only) the new name without warning.
As the documentation of the toggle says - the implementation can (and
will actually if they follow the GLX/EGL spec) return context version
greater than the one requested.
This happens with all Mesa drivers that I've tested as well as the
Nvidia binary drivers.
This toggle seems like a workaround for buggy drivers, yet it's lacking
context about the vendor and version.
Remove it for now - I'll be happy to reinstate it (partially or in full)
as we get concrete details.
This allows us to simplify ra_gl_ctx_test_version() making the whole
context creation business easier to follow by mere mortals.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This behavior is more convenient and allows profile conditions like:
[video]
profile-cond=get('current-tracks/video/image') == false
[image]
profile-cond=get('current-tracks/video/image')
Otherwise, these profiles have to be manually applied and restored in a
script.
The note about discouraging the use of current-tracks in scripts is
removed, because it makes people avoid using this convenient property.
It was added in 720bcd79d0 without leaving an explanation of why you
shouldn't use it, and the only reason seems to be that it doesn't work
with lavfi-complex, but this commit changes that.
This exposes whether a video track is detected as an image, which is
useful for profile conditions, property expansion and lavfi-complex.
The lavf demuxer sets image to true when the existing check detects an
image.
When the lavf demuxer fails, the mf one guesses if the file is an image
by its extension, so sh->image is set to true when the mf demuxer
succeds and there's only one file.
The mkv demuxer just sets image to true for any attached picture.
The timeline demuxer just copies the value of image from source to
destination. This sets image to true for attached pictures, standalone
images and images added with !new_stream in EDL playlists, but it is
imperfect since you could concatenate multiple images in an EDL playlist
(which should be done with the mf demuxer anyway). This is good enough
anyway since the comment of the modified function already says it is
"Imperfect and arbitrary".
The custom init script should be considered a configuration file, and
as such it should be ignored when the user wants vanilla mpv - and now
it is ignored with --no-config.
This is similar to [no-]input-default-bindings, but affects only
builtin bindings (while input-default-bindings affects anything which
config files can override, like scripting mp.add_key_binding).
Arguably, this is what input-default-binding should have always done,
however, it does not.
The reason we add a new option rather than repurpose/modify the
existing option is that it behaves differently enough to raise
concerns that it will break some use cases for existing users:
- The new option is only applied once on startup, while
input-default-bindings can be modified effectively at runtime.
- They affects different sets of bindings, and it's possible that
the set of input-default-bindings is useful enough to keep.
Implementation-wise, both options are trivial, so keeping one or the
other or both doesn't affect code complexity.
It could be argued that it would be useful to make the new option
also effective for runtime changes, however, this opens a can of
worms of how the bindings are stored beyond the initial setup.
TL;DR: it's impossible to differentiate correctly at runtime between
builtin bindings, and those added with mp.add_key_bindings.
The gist is that technically mpv needs/uses two binding "classes":
- weak/builtin bindings - lower priority than config files.
- "user" bindings - config files and "forced" runtime bindings.
input-default-bindings affects the first class trivially, but
input-builtin-bindings would not be able split this class further
at runtime without meaningful changes to a lot of delicate code.
So a new option it is. It should be useful to some libmpv clients
(players) which want to disable mpv's builtin bindings without
breaking mp.add_key_bindings for scripts.
Fixes#8809
(again. the previous fix 8edfe70b only improved the docs, while
now we're actually making the requested behavior possible)
Unfortunately, this functionality in large part based on a struct
member that was made private in FFmpeg/FFmpeg@7489f63281
in May. Unfortunately, this was not noticed during review.
This reverts commit 0862664ac9.
This exposes whether a video track is detected as an image. This is
useful for profile conditions, property expansion and lavfi-complex, and
is more accurate than any detection even Lua scripts can perform, since
they can't differentiate between images and videos without container-fps
and audio and with duration 1 (which is the duration set by the mf
demuxer with the default --mf-fps=1).
The lavf demuxer image check is moved to where the number of frames is
available for comparison, and is modified to check the number of frames
and duration instead of the video codec. This doesn't misdetect videos
in a codec commonly used for images (e.g. mjpeg) as images, and can
detect images in a codec commonly used for videos (e.g. 1-frame gifs).
pix files are also now detected as images, while before they weren't
since the condition was checking if the AVInputFormat name ends with
_pipe, and alias_pix doesn't.
Both nb_frames and codec_info_nb_frames are checked because nb_frames is
0 for some video codecs (hevc, av1, vc1, mpeg1video, vp9 if forcing
--demuxer=lavf), and codec_info_nb_frames is 1 for others (mpeg, mpeg4,
wmv3).
The duration is checked as well because for some uncommon codecs and
containers found in FFMpeg's FATE suite, libavformat returns nb_frames =
0 and codec_info_nb_frames = 1. For some of them it even returns
duration = 0, so they are blacklisted in order to never be considered
images.
The extra codecs that would have to be blacklisted without checking the
duration are AV_CODEC_ID_4XM, AV_CODEC_ID_BINKVIDEO,
AV_CODEC_ID_DSICINVIDEO, AV_CODEC_ID_ESCAPE130, AV_CODEC_ID_MMVIDEO,
AV_CODEC_ID_NUV, AV_CODEC_ID_RL2, AV_CODEC_ID_SMACKVIDEO and
AV_CODEC_ID_XAN_WC3, while the containers are film-cpk, ivf and ogg.
The lower limit for duration is 10 because that's the duration of
1-frame gifs.
Streams with codec_info_nb_frames 0 are not considered images because
vp9 and av1 have nb_frames = 0 and codec_info_nb_frames = 0, and we
can't rely on just the duration to detect them because they could be
livestreams without an initial duration, and actually even if we could
for these codecs libavformat returns huge negative durations like
-9223372036854775808.
Some more images in the FATE suite that are really frames cut from a
video in an uncommon codec and container, like cine/bayer_gbrg8.cine,
could be detected by allowing codec_info_nb_frames = 0, but then any
present and future video codec with nb_frames = 0 and
codec_info_nb_frames = 0 would need to be added to the blacklist. Some
even have duration > 10, so to detect these images the duration check
would have to be removed, and all the previously mentioned extra codecs
and containers would have to be added added to the blacklists, which
means that images that use them (if they exist anywhere) will never be
detected. These FATE images aren't detected as such by mediainfo either
anyway, nor can a Lua script reliably detect them as images since they
have container-fps and duration > 0 and != 1, and you probably will
never see files like them anywhere else.
For attached pictures the lavf demuxer always set image to true, which
is necessary because they have duration > 10. There is a minor change in
behavior for which audio with attached pictures now has mf-fps as
container-fps instead of unavailable, but this makes it consistent with
external cover art, which was already being assigned mf-fps.
When the lavf demuxer fails, the mf one guesses if the file is an image
by its extension, so sh->image is set to true when the mf demuxer
succeds and there's only one file.
Even if you add a video's file type to --mf-type and open it with the mf
protocol, only the first frame is used, so setting image to true is
still accurate.
When converting an image to the extensions listed in demux/demux_mf.c,
tga and pam files are currently the only ones detected by the mf demuxer
rather than lavf. Actually they are detected with the image2 format, but
it is blacklisted; see d0fee0ac33.
The mkv demuxer just sets image to true for any attached picture.
The timeline demuxer just copies the value of image from source to
destination. This sets image to true for attached pictures, standalone
images and images added with !new_stream in EDL playlists, but it is
imperfect since you could concatenate multiple images in an EDL playlist
(which should be done with the mf demuxer anyway). This is good enough
anyway since the comment of the modified function already says it is
"Imperfect and arbitrary".
Because youtube-dl is inactive and the yt-dlp fork is becoming more
popular, make mpv use yt-dlp without any extra configuration.
yt-dlp is ordered before youtube-dl because it's more obscure, so users
who have yt-dlp installed are more likely to want to use it rather than
youtube-dl.
Fixes#9208.
The "cycle" command _declaration_ enables repeatability by default,
however, the command handler applies additional logic to augment it,
based on the property which is being cycled - using some guesswork.
Specifically, properties with discrete values are not repeatable
(like sub or osd-level), while continuous properties are repeatable
(like volume).
Previously, the "repeatable" prefix could not override this additional
logic.
This commit changes the behavior so that the logic affects only the
default repeatability (still based on the property like before),
however, the "repeatable" prefix is now allowed to override it.
Previously, a list of commands was always considered repeatable.
This behavior was added at 6710527a (and moved around since then),
in order to fix#807 (impossible to make a repeatable list).
The problem was that a list doesn't have the normal repeatability
flags and so it was never repeatable, so it was hardcoded to be
repeatable instead. Presumably it was deemed good enough.
However, this made it impossible to have a non-repeatable list.
This commit changes the behavior so that a list repeatability is
that of the first command at the list.
This way, any list can be made either repeatable or non-repeatable
using the following idiom (e.g. at input.conf), based on the fact
that the "ignore" command is not repeatable by default:
x ignore; cmd1...; cmd2... # non-repeatable
y repeatable ignore; cmd1...; cmd2... # repeatable
Fixes#7841
Discovered with:
find . -type f \( -name '*.md' -o -name '*.rst' \) -exec grep -n 'http://' {} +
All real, i.e. non-example, links found were moved to https. There are
some dead links and websites with no https available which were not
converted.
Discovered with:
find . -type f \( -name '*.md' -o -name '*.rst' \) -exec grep -n 'http://' {} +
All links to mpv.io or github.com/mpv-player that were http were
converted to https.
- Replace the legacy --osd-status-msg with the newer --osd-msg3.
- Escape \b in show-text "This is ${osd-ass-cc/0}{\b1}bold text".
- Link the Flat command syntax section because it's no longer true that
you always need to escape \, since C escape sequences are not
interpreted with single and custom quotes.
The previous wording gave the false impression that there was no media
key support for OSes besides Windows and macOS. This is untrue, the
option may only exist on those two platforms but it simply means that
media keys will always be enabled on other OSes as long as they are
supported.
There's currently some touch related code in mpv wayland, but clearly
nobody actually uses because it's a broken mess. Initially an attempt to
distinguish between two finger touches and one finger touch was made,
but there's not a good way to make this work. For whatever reason,
initiating either xdg_toplevel_resize or xdg_toplevel_move blocks any
other touch events from occurring (at least in plasma). Trying to call
these functions anywhere else is not really useful since the serial will
be invalid outside of the touch down events (well it would work in the
touch up event but that's just silly).
Anyways, let's just make this work sanely. Eliminate the touch entries
variable completely because it's pointless. Only one finger event is
ever considered at a time. Touches besides the initial one are all
ignored. If a user touches and drags within the touch edge radius, then
a resize event occurs. If the user touches and drags elsewhere on the
window, a move event occurs. A single tap displays the osc (which is
clickable if you tap again). A double tap toggles fullscreen.
Additionally, the default touch edge radius of 64 pixels is way too big
(at least I think so). Cut this in half to 32 which feels a lot better
(on a pinephone using plasma mobile anyway).
The window-scale property mirrors the respective option (not the
effective scale derived from the current window size), and as such
setting its value to the same value it had before has no effect.
Specifically - the window will not resize.
This is consistent as far as property-option bridge behavior goes,
but we do end up with an issue that we can't set an arbitrary scale
and expect the window to always resize accordingly.
We do also have a current-window-scale property which does reflect
the actual window size, however, it's been read-only till now.
This commit makes current-window-scale RW so that it's now always
possible to set an arbitrary scale and expect the window to resize
accordingly (without affecting window-scale - like manual resize).
Also, mention window-scale no-effect-if-not-changed at the docs.
Based on code by @Dudemanguy from commit 873ae0d, with same effect.
This reverts commit 873ae0de2a.
The next commit will restore this functionality, with the
following differences from the reverted commit:
- Smaller and simpler code change.
- On bad scale: use "Invalid value" (compared to "no such property").
- Doesn't combine the docs for window-scale and current-window-scale.
- Doesn't remove the docs for window-scale behavior prior to 0.31.0.
Somewhat confusingly, mpv has both a window-scale option and a
current-window-scale property. The documentation lists window-scale
under properties (and it is technically is one), but at its core it is
actually an option which means it behaves subtly different. Options in
mpv are runtime-configurable, but they only change anything if the value
of the option itself changes. window-scale is an option and not meant to
keep track of the actual scale of the window (intended behavior
introduced by d07b7f0). This causes window-scale to do nothing in
certain cases (ex: the window is manually resized and window-scale is
set to 1.00 again). This is logical and consistent with the behavior of
the rest of the mpv options, but it also makes it a poor candidate for
setting the mpv window scale dynamically.
As a remedy, we can just make current-window-scale writeable instead.
current-window-scale is intended to always report the actual scale of
the window and keep track of any window size changes made by the user.
By making this property also writeable, it allows the user to have more
intuitive behavior (i.e. setting current-window-scale to 1.00 always
sets the window to a scale of 1). Additionally, the default input.conf
is changed to use current-window-scale instead of window-scale. The
window-scale documentation under property list is removed since it is
already documented under options and users should probably set the
current-window-scale property instead in most cases.
Using --sub-filter-regex-plain (default:no)
The ass-to-plaintext functionality already existed at sd_ass.c, but
it's internal and uses a private buffer type, so a trivial utility
wrapper was added with standard char*/bstr interface.
The plaintext can be multi-line, and the multi-line regexp flag is now
always set, but only affects plaintext (the ASS source is one line).
Pretty much identical to filter-regex but with JS expressions and
requires only JS support. Shares the filter-regex-* control options.
The target audience is Windows users - where filter-regex doesn't
work due to missing APIs, but mujs builds cleanly on Windows, and JS
is usually enabled in 3rd party Windows mpv builds.
Lua could have been used with similar effort, however, the JS regex
syntax is more extensive and also much more similar to POSIX.
Users expect single quotes to work when the value includes literal
backslashes or double-quotes (or as general quoting like in shell).
The updated docs also include some previously-missing notes:
- newline is only supported in double quotes.
- adjacent (quoted) arguments don't join into one.
Supporting mixed quoting (adjacent quoted strings) would make
mpv's parsing more complete, but would require delicate effort of
larger scope, for two reasons:
- We'd need to also support escaping outside of quotes and do our
best about backward compatibility.
- The parsed value can either be a substring of the input or
a newly-allocated string, which would be delicate when joining.
Not critical to add right now.
Custom quotes were added in 4f129a3e and began with !, however, this
required quoting "!reverse" (used for the cycle-values command), which
is inconvenient, and was not taken into account when ! was chosen for
custom quotes. Also, ` is more natural for quoting than !.
This does break backward compatibility with the earlier form of custom
quotes, but at least we didn't make a release yet since custom quotes
were added (the last release - 0.33[.1] doesn't support it).
Let audio-display determine whether embedded images or external cover
art tracks should be selected when both are present.
Attached pictures are given priority by default as requested in #8539.
Also updates references to attached pictures in the log and manpage to
refer to cover art as well.
Closes#8539.
This fix the warnings shown below when compiling the manual for
any of its three common formats:
```
DOCS/man/mpv.rst:46: (ERROR/3) Unknown target name: "--input-test".
DOCS/man/stats.rst:183: (ERROR/3) Unknown target name: "--input-test".
```
In rst, double-backtick starts a code string only if it's followed by
a non-space char, otherwise it's taken literally, hence, `` x2.0``
was taken literally rather than code string.
--watch-later-options-remove doesn't accept multiple options, so split
the example.
Also suggest the more correct -clr to empty the list, and remove the
workaround to not print an error with --watch-later-options=
This allows configuring which options are saved by quit-watch-later.
Fixes#4126, #4641 and #5567.
Toggling a video or audio filter twice would treat the option as changed
because the backup value is NULL, and the current value of vf/af is a
list with one empty item, so obj_settings_list_equal had to be changed.
Unlike the page switching/scrolling keys which are bound at runtime
and therefore we need to know which (configured) keys to bind, the
main keys (i/I by default) are static and can be bound via input.conf.
And indeed, the builtin bindings at etc/input.conf have them already.
- The video filter to turn the video upside-down is vflip. There is no
filter called "flip" so using it just causes an error.
- Reword a sentence.
- Add exact and all to the values accepted by cover-art-auto. They were
implemented in 029ff1049b but not added to the accepted arguments.
While --input-test is useful, and so is page 4 of stats, until now
there was no way to simply print the list in a help-like fashion.
This commit adds such printout, invoked by the script opt
stats-bindlist=yes, which uses the existing page 4 code. This prints
the list on startup and quits immediately - like any help page.
It's awkward to invoke compared to other help pages, and it does
require the stats page to be enabled (it is by default), however
it is a script-generated output, and currently there's no other
method to print a help page generated by a script.
The printout itself is performed using lua's io.write. While reliable,
it's not the standard way for mpv to print to the terminal.
Other possible printout methods are mp.msg.info - which also prints
"[stats]" prefix on each line (ugly), or forcing term-osd and setting
an osd-message which mpv will then print at the terminal - however
that's printed to stderr, and could also be subject to timing concerns
since we quit right afterwards.
In the future we can consider changing/integrating the invocation so
that mpv itself could print a help page generated by a script, thus
solving both the awkward invocation and printout-method issues.
This is a scrollable page which also works nicely with the terminal
OSD. Typically there are more than 100 bound keys.
It groups the binding using fuzzy property/command/script name after
simple analysis of the command string, and then further sorts the
binding in each group according to the "complexity" of the key itself
(plain keys -> keys with modifiers, alphabetically, etc).
The alignment/grouping style is heavily inspired by @medhefgo's #8924
but otherwise it's an independent implementation.
The --secondary-sub-visibility options was previously undocumented in
the pull request that added it. This commit adds documentation for it
and clarifies its behavior.
Modifies the sub-seek and sub-step commands with a second <flags>
argument to specify whether to seek/step on the primary or secondary
subtitles. The flag is used to index into the current_track array in
cmd_sub_step_seek.
Adds secondary-sub-start and secondary-sub-end properties by setting
the current_track index in the m_property's priv variable which later
gets accessed in get_times. Also adds a test of the secondary subtitle
time properties in tests/subtimes.js bound to 'T'.
Not sure what I was on when I wrote this. wayland-app-id is supposed to
default to "mpv". Just set that in the vo_sub_opts and don't do this
weird m_config_cache_write_opt thing. Also make the doc entry nicer.
This fixes a long-standing apparent issue where mpv would display the last
frame with no subtitles at EOF. This is caused by sub rendering switching from
video timestamps to audio timestamps when the video ends, and audio streams
often running past the timestamp of the last video frame. However, authoring
tools (most notably Aegisub) don't tend to provide easy ways to add meaningful
subtitles after the end of the video, so this is rarely actually useful.
This makes cover-art-auto behave more like sub-auto and audio-file-auto:
- load cover art with a language, e.g. if playing foo.mp3, foo.en.jpg
will be loaded with lang=en
- load cover art containing the media filename with fuzzy and all, e.g.
'foo (large).jpg'
- make all/2 load all images in the directory, and make fuzzy/1 the
default
These are all uncommon use cases, but synchronizing the behavior of the
external file options simplifies the code.
Commit 6abb7e3 updates the markers when the chapters change, but it
doesn't update their relative position at the bar when the duration
changes.
This means that adding chapters to a live stream would result in
corresponding chapter markers which were static while the duration
changed and thus their positions became incorrect over time until the
OSC was reinitialized.
This is fixed by observing the duration property if chapters are present
and reinitializing the OSC when the duration changes.
The live_markers user option, which determines whether the duration
property is observed when there are chapters, has been added in order to
allow disabling this behaviour as calling request_init() frequently
might have some impact on low-end systems.
The impact of request_init() on render() was measured to increase from
1-1.5 ms to 2-3 ms on a 2010 MacBook Air, while the impact was neglible
on a 2016 Surface Book (increasing only to an average of 1.4 ms from
1.3 ms for n=1500 render cycles).
The live_markers option is enabled by default.
This is the Vulkan equivalent of the drm context for OpenGL, with
the big difference that it's implemented purely in terms of Vulkan
calls and doesn't actually require drm or kms.
The basic idea is to identify a display, mode, and plane on a device,
and then create a display backed surface for the swapchain. In theory,
past that point, everything is the same, and this is in fact the case
on Intel hardware. I can get a video playing on a vt.
On nvidia, naturally, things don't work that way. Instead, nvidia only
implemented the extension for scenarios where a VR application is
stealing a display from a running window system, and not for
standalone scenarios. With additional code, I've got this scenario to
work but that's a separate incremental change.
Other people have tested on AMD, and report roughly the same behaviour
as on Intel.
Note, that in this change, the VT will not be correctly restored after
qutting. The only way to restore the VT is to introduce some drm
specific code which I will illustrate in a separate change.
And also change the existing WM_KILLFOCUS handler to return 0 instead
of 'break' (which later calls DefWindowProcW), as MSDN says we should
do for WM_{KILL,SET}FOCUS.
It seems that the 'focused' property is now supported by all main VOs:
x11, macOS, wayland, Windows.
TCT/sixel/caca probably don't support it, and unknown with SDL.
Fixes#8868
Not only does this have semantics that make far more sense, it also has
a default that makes far more sense. (Equivalent to the old
`icc-contrast=inf`)
This removes the weird 1000:1 contrast default assumption which
especially broke perceptual profiles and also screws things up for
OLED/CRT/etc.
Should probably close some issues but I honestly can't be bothered to
figure out which of the thousands colorimetry-related issues are
affected.
For some reason, this never existed before. Add VOCTRL_GET_DISPLAY_RES
and use it to obtain the current display's resolution from each
vo/windowing backend if applicable. Users can then access the current
display resolution as display-width and display-height as per the client
api. Note that macOS/cocoa was not attempted in this commit since the
author has no clue how to write swift.
This commit describes more accurately what currently gets disabled
by this option - specifically also keys from mp.add_key_binding.
It's not necessarily the best behavior because libmpv clients might
want to disable mpv's own builtin keybindings while still allowing
scripts to define keys which `input.conf' can override.
In the future we might exclude mp.add_key_binding from this option,
but for now at least document this option accurately.
Fixes#8809
The ctime member on Windows uses FILE_BASIC_INFO.ChangeTime, which is
pretty much the same as st_ctime on POSIX.
See https://devblogs.microsoft.com/oldnewthing/20100709-00/?p=13463 :
... The LastWriteTime covers writes to the file’s data stream
(which you accomplish via the WriteFile function). On the other
hand, the ChangeTime also includes changes to the file metadata,
such as changing its file attributes ...
Fixes#8801
Some subproperties in osd-dimensions were returned as doubles despite
actually being integers. Additionally, correct a highly misleading line
in the osd-width/osd-height documentation.
The accurate description of this option was:
- fit-border is enabled by default. When disabled, it adds a bug where
if the window has borders and mpv shrinks it to fit the desktop, then
the calculation ignores the borders and adds incorrect video crop.
The option was added at commits 70f64f3c and 949247d6, in order to
solve an issue (#2935) where if mpv wanted to display a video with
size WxH, then w32_common.c incorrectly set the window to WxH, while
down-scaling the video slightly to fit (even with small sizes).
It was addressed with a new option which is enabled by default, but
does the right thing (sets the client area to WxH) only when disabled,
so that everyone who prefers their video slightly downscaled could
keep their default behavior.
(#2935 also addressed an off-by-one issue, fixed before fit-border)
While disabling the option did avoid unnecessary downscaling, it also
added a bug when disabled: the borders are no longer taken into
account when the size is too big for the desktop. Most users don't
notice and are unaffected as it's enabled by default.
Shortly later (981048e0) the core issue is fixed, and now the client
area is correctly set to WxH instead of the window (and together with
the three following commits which center the video, adds a new bug
where the window title can be outside the display - addressed next).
However, fit-border remained, now without any effect, except that it
still has the same bug when disabled and the window is too big.
Later code changes and refactoring preserved this issue with great
attention to details, and it remained in identical form until now.
Simply rip out fit-border.
When mpv attempts to play a video that is, on average, 60 FPS on a
display that is not exactly 60.00 Hz, two options try to fight each
other: `video-sync-max-video-change` and `interpolation-threshold`.
Normally, container FPS in something such as an .mp4 or a .mkv is
precise enough such that the video can be retimed exactly to the display
Hz and interpolation is not activated.
In the case of something like certain live streaming videos or other scenario
where container FPS is not known, the default option of 0.0001 for
`interpolation-threshold` is extremely low, and while
`video-sync-max-video-change` retimes the video to what it approximately
knows as the "real" FPS, this may or may not be outside of
`interpolation-threshold`'s logic at any given time, which causes
interpolation to be frequently flipped on and off giving an appearance
of stuttering or repeated frames that is oftern quite jarring and makes
a video unwatchable.
This commit changes the default of `interpolation-threshold` to 0.01,
which is the same value as `video-sync-max-video-change`, and guarantees
that if the user accepts a video being retimed to match the display,
they do not additionally have to worry about a much more
precise interpolation threshold randomly flipping on or off. No internal
logic is changed so setting `interpolation-threshold` to -1 will still
disable this logic entirely and always enable interpolation.
The documentation has been updated to reflect this change and give
context to the user for which scenarios they might want to disable
`interpolation-threshold` logic or change it to a smaller value.
Changes:
- code refactored;
- mixer options removed;
- new mpv sound API used;
- add sound devices detect (mpv --audio-device=help will show all available devices);
- only OSSv4 supported now;
Tested on FreeBSD 12.2 amd64.
Apple has decided that Mac OS X is now named macOS for the time
being. For consistency, it makes sense to use the same name for the
operating system in all places where it occurs. This commit renames
OS X to macOS in the documentation in places where it was otherwise
still using the old name.
Where X is any ASCII char chosen by the user. An argument is only
interpreted as custom-quoted if it starts with '!' and the line doesn't
end right after it. Custom quotes don't interpret backslash-escape.
This change only affects command arguments which mpv parses (not array
commands), and not tokens before the arguments (where applicable - key
name, input section, command prefixes, command name).
currently we use the whole screen rectangle to calculate the window
geometry. this doesn't take the menu bar or the Dock into account.
by default use the visible screen rectangle instead. this is also a
change in behaviour, since the window can't be placed outside of this
rectangle anymore. also add an option to change to the old behaviour,
because it can still be useful in certain cases, like placing the window
directly underneath the menu bar when used a desktop background.
Fixes#8272
--alpha=yes doesn't affect only transparent videos and images, but also
the background. I spent time researching how to implement transparent
backgrounds and had no idea that they already worked at least on
Wayland.
Background transparency will work on X11 when
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2376 is
merged. It doesn't work on Windows. No idea about macOS. Either way,
this paragraph already says that it only works on certain environments
twice.
References #6590
With the current wording, I thought that playlist-prefetch doesn't
prefetch the next url within a playlist of m3u8 urls, but it makes a big
difference, and I would have enabled it earlier if it wasn't for this
paragraph.
This makes it clear that you can prefetch any file, but that it won't
prefill the cache with the video data. This is true for any video,
there's nothing unique about HLS streams in the behavior of this option.
Simple groundwork for adding a couple of user options that allow
selecting the screen with a string name. The next two commits implements
these options for xorg and wayland.
While this says that _ is replaced with -, it doesn't say that you HAVE
to use _. This isn't obvious and I didn't understand why my profile
conditions with - weren't working at first. Seeing as the person who
reproted #8324 ran into this as well, this may be worth clarifying.
For two reasons:
1. It was counter intuitive that there's an "auto" value (which is
actually a libsixel value and not an mpv one), but it's not the
default value - our default was Atkinson.
2. "auto" provides better dithering than Atkinson with libsixel, which
is especially noticeable with smooth gradients - where Atkinson has
visible banding.
In libsixel 1.8.2 the "auto" value maps to Atkinson if the output
palette has up to 16 colors, or to Floyd-Steinberg otherwise (e.g.
using fixed palette with 256 colors chooses Floyd-Steinberg).
The issue was that we only uploaded the palette to the terminal when it
changed (once on init with fixed palette, every frame with dynamic
palette with trheshold=-1, only on scene change with threshold >= 0).
Now we upload it on every frame, and it seems to fix the mlterm image
corruption both with fixed palette and also with dynamic palette with
threshold (i.e. at frames which did not upload a palette).
It's not entirely clear why it's required with mlterm.
It would seem that the palette which libsixel uses with fixed palette
matches the built in default palette in xterm, but not in mlterm.
With dynamic palette we can guess that mlterm resets the palette after a
sixel image, but that's not confirmed.
Uploading the palette on every frame doesn't seem to slow down xterm
when using fixed palette - not clear yet why uploading a different
palette (when using fixedpalette=no) slows it down while same palette
on every frame doesn't.
In mlterm there's no slowdown either way - and now also no corruption.
By default we still clear the screen, but now it's possible to leave the
last sixel image on screen.
Allows mpv to be used as img2sixel of sorts, but with our auto-fit and
various mpv scaling/filters etc.
This reverts commit 3d17e19c2c.
The effect of turning off this setting is that mpv doesn't tell libass what
the video stream's resolution is. This happens to result in some files having
their transforms scaled in ways that give higher performance (as described
in #7435) because libass happened to guess a video resolution that resulted
in transforms yielding smaller bitmaps, but it's just as easy for the opposite
to happen depending on the resolutions and effects involved.
The option's name is also somewhat misleading: setting the storage size affects
blur, but it also affects stroke (which is far more important for the vast
majority of scripts) and 3D transforms (which look very screwy when done wrong).
Resize the image based on the dimensions reported by
vo_get_src_dst_rects to correctly handle aspect ratio
that might be set/ignored.
Added pad-x and pad-y options for padding.
These options will be used to remove the extra padding.
Some terminals report the padding of 2px in the ioctl
dimensions which can't be used for displaying sixel
output. These options can be used for fine tuning
the output video resolution.
Now all the terminal size detection and calculation logic
is done in a single function at resize. Also top and left
values are computed from the dst_rect parameters to simplify
the logic for the aspect ratio based centering.
Additionally vo-sixel-rows and vo-sixel-cols options
have been added to enable the user to override the values
in case of failures with get_terminal_size2.
This commit also adds ability to handle video zoom correctly.
Whenever video-zoom is triggered, the src and dst rects
will be updated. Scaling seems to work well now.
Having them in the same line made it hard to read them in the man page
since they are formatted in the same way and they look as though they
are only one definition.
Recent versions of mpv have applied security checks to --playlist
that previously only existed if playlist files were played as an
input directly. This commit documents this change and how to work
around it, in the event that playlist files are trusted.
Apparently mpv supports loading config files from the same directory as
the mpv.exe. This is a fallback of some sort. It used the old_home
mechanism.
I want to add a warning if old_home exists, but that would always show
the warning on win32. Obviously we don't want that.
Add a separate exe_dir entry to deal with that.
Untested, but probably works.
Mistakenly reverted as part of the default configuration directory
location switch-back in aa18a8e1cd.
Separation of the mpv executable directory from old_path is a
good change now that we warn about the old_config directory also
existing.
Fixes#8232Fixes#8244Fixes#8262
This can be viewed at page 4 of the internal stats display (i or I).
CPU time report is the same as at lua.c, but untested - doesn't seem
to work on windows - also not for lua.
TL;DR: Set env MPV_LEAK_REPORT=1 to enable js memory reporting stats.
This also almost doubles the memory usage by js scripts.
For memory reporting, we don't have enough info by default, because
even when using a custom allocator, mujs doesn't report the old size
(on free or realloc) because it doesn't track this value, and as
a result we can't track the overall size.
Our option are either to track the size of each allocation on our own,
or use talloc which tracks this value.
However, using talloc for mujs allocations adds a considerable
overhead, and almost doubles(!) the overall memory used, because each
individual allocation includes a considerable talloc header, and mujs
does many small allocations.
So our solution is that by default we behave like previously - not
using a custom allocator with mujs, and stats does not display memory
usage for js scripts.
However, if the env var MPV_LEAK_REPORT is set to 1, then we use
a custom allocator with talloc and track/report memory usage.
We can't switch allocator at runtime, so an mpv instance either tracks
or doesn't track js scripts memory usage, according to the env var.
(we could use a property and apply it whenever a new script starts,
so that it could change for newly launched scripts, but we don't).
- Explain which properties are writeable.
- Mark edition-list/N/id as writable.
- Remove (R) from some read-only properties since none of the others
have it.
- Add osd-dimension/ to its subproperties.
- options/<name> isn't read-only.
- focused works on macOS because of 82eda2e. Though it shouldn't be
possible to observe it without raising VO_EVENT_FOCUS.
The picture type is explained in /usr/include/libavutil/avutil.h
Other subproperties in /usr/include/libavutil/frame.h
And there is a more detailed explanation for repeat_pict in
/usr/include/libavcodec/avcodec.h
When possible, refer to booleans with "Whether..." since it can refer to
both yes (using input.conf and mp.get_property) and true (using the JSON
IPC or mp.get_property_native/bool), else explicitly say yes/true.
Say "true" for subprocess and osd-overlay named arguments since you
can't use them in input.conf and you will typically use them with the
boolean true in the named arguments, like the subprocess example in the
manpage does (though the string "yes" also works).
Subproperties that can't be accessed with the / syntax like
demuxer-cache-state's bof-cached and eof-cached always return true,
never yes.
Based on the implementation of ffmpeg's sixel backend output written
by Hayaki Saito
https://github.com/saitoha/FFmpeg-SIXEL/blob/sixel/libavdevice/sixel.c
Sixel is a protocol to display graphics in a terminal. This commit
adds support to play videos on a sixel enabled terminal using libsixel.
With --vo=sixel, the output will be in sixel format.
The input frame will be scaled to the user specified resolution
(--vo-sixel-width and --vo-sixel-height) using swscaler and then
encoded using libsixel and output to the terminal. This method
requires high cpu and there are high frame drops for 720p and
higher resolution videos and might require using lesser colors and
have drop in quality. Docs have all the supported options listed
to fine tune the output quality.
TODO: A few parameters of libsixel such as the sixel_encode_policy
and the SIXEL_XTERM16 variables are hardcoded, might want to
expose them as command line options. Also the initialization
resolution is not automatic and if the user doesn't specify the
dimensions, it picks 320x240 as the default resolution which is not
optimal. So need to automatically pick the best fit resolution for
the current open terminal window size.
This allows keybindings such as:
a script-message-to console type "seek :0 absolute" 6
% script-message-to console type "seek absolute-percent" 6
The cursor position 0 isn't allowed because it has the weird effect of
filling the console with the text twice, leaving the cursor in the
middle.
Negative positions would put the cursor n characters before the end, and
positions greater than the text's length at the end. They seem to work
at first, but the console breaks when you move the cursor, so they
aren't allowed.
It seems that float values don't cause issues, but I'm using the
argument's floor anyway to be safe. Using >= 1 instead of > 0 ignores
values like 0.5.
This introduces the delete-watch-later-config command, to complement
write-watch-later-config. This is an alternative to #8141.
The general problem that this change is attempting to help solve has
been described in #336, #3169 and #6574. Though persistent playback
position of a single file is generally a solved problem, this is not
the case for playlists, as described in #8138.
The motivation is facilitating intermittent playback of very large
playlists, consisting of hundreds of entries each many hours
long. Though the current "watch later" mechanism works well - provided
that the files each occur only once in that playlist, and are played
only via that playlist - the biggest issue is that the position is
lost completely should mpv exit uncleanly (e.g. due to a power
failure). Existing workarounds (in the form of Lua scripts which call
write-watch-later-config periodically) fail in the playlist case, due
to the mechanism used by mpv to determine where within a playlist to
resume playback from.
The missing puzzle piece needed to allow scripts to implement a
complete solution to this problem is simply a way to clean up the
watch-later configuration that the script asked mpv to write using
write-watch-later-config. With that in place, scripts can then
register an end-file event listener, check the stop playback reason,
and in the "eof" and "stop" case, invoke delete-watch-later-config to
delete any saved positions written by write-watch-later-config. The
script can then proceed to immediately write a new one when the next
file is loaded, which altogether allows mpv to resume from the correct
playlist and file position upon next startup.
Because events are delivered and executed asynchronously,
delete-watch-later-config takes an optional filename argument, to
allow scripts to clear watch-later configuration for files after mpv
had already moved on from playing them and proceeded to another file.
A Lua script which makes use of this change can be found here:
https://gist.github.com/CyberShadow/2f71a97fb85ed42146f6d9f522bc34ef
(A modification of the one written by @Hakkin, in that this one takes
advantage of the new command, and also saves the state immediately
when a new file is loaded.)
The original documentation here is unclear, so let's describe the
behaviour we actually have. Inspired by wm4's updated docs but
obviously not identical because we're not changing any of the
behaviours.
Pointless feature that can be done with environment variables. It was
also implemented incorrectly and broke autoprobing.
This reverts commit 015b676875.
As per the client API, a client can connect to any arbitrary wayland
socket. mpv has always just passed NULL which connected to the
compositor currently in use, but one could just as easily pass the name
of a different socket (i.e. the value of WAYLAND_DISPLAY). Here, we just
expose this argument as a user configurable option. If the user passes a
socket name that does not exist, then print a warning and fall back to
NULL.
Picks up files like "cover.jpg". It's made part of normal external file
loading, so I'm adding 3 new options that are direct equivalents for the
options that control loading of external subtitle and audio files. Even
though I bet nobody wants them and they just increase confusion... I
guess the world is actually hell, so this outcome should be fine.
It prefers non-specific external files like "cover.jpg" over embedded
cover art. Not sure if that's wanted or unwanted.
There's some pain over explicitly marking such files as external
pictures. This is basically an optimization: in most cases, a heuristic
would treat an image file loaded with --external-file the same (it's a
heuristic because ffmpeg can't tell us whether something is an image or
a video). However, even with this heuristic, it would decode the cover
art picture again on each seek, which would essentially slow down
seeking in audio files. This bothered me greatly, which is why I'm
adding these additional options at all, and bothered with the previous
commit.
Fixes: #3056
on macOS 10.15 setting the activation policy behaves quite weirdly. the
call changes the current active App to a nameless process, which
probably also the reason that prevents the not focusing to work.
a workaround for that, is to refocus the previous active app.
Fixes#7725
Add a property that returns whether the window is focused, currently
only for X11 and Wayland.
My use cause for this is having an equivalent of pause-when-minimize.lua
for tiling window managers: make mpv play only while it's in the current
workspace or is focused (I'm fine with either one but prefer focus).
On X I do this by observing display-names, which is empty when the
rectangles of the display and mpv don't intersect, but on Wayland its
value doesn't change when mpv leaves the current workspace (and the same
check doesn't work since the geometries still intersect).
This could later be made writable as requested in #6252.
Note that on Wayland se shouldn't consider an unactivated window with
keyboard input focused.
The wlroots compositors I tested set activated after changing the
keyboard focus, so if you set wl->focused only in
keyboard_handle_enter() and keyboard_handle_leave() to avoid adding the
"has_keyboard_input" member, focused isn't set to true when first
opening mpv until you focus another window and focus mpv again.
Conversely, if that order can't be assumed for all compositors, we
should toggle wl->focused when necessary in keyboard_handle_enter() and
keyboard_handle_leave() as well as in handle_toplevel_config().
--audio-stream-silence is a shitty feature compensating for awful
consumer garbage, that mutes PCM at first to check whether it's
compressed audio, using formats advocated and owned by malicious patent
troll companies (who spend more money on their lawyers than paying any
technicians), wrapped in a wasteful way to make it constant bitrate
using a standard whose text is not freely available, and only rude users
want it. This feature has been carelessly broken, because it's
complicated and stupid. What would Jesus do? If not getting an aneurysm,
or pushing over tables with expensive A/V receivers on top of them, he'd
probably fix the feature. So let's take inspiration from Jesus Christ
himself, and do something as dumb as wasting some of our limited
lifetime on this incredibly stupid fucking shit.
This is tricky, because state changes like end-of-audio are supposed to
be driven by the AO driver, while playing silence precludes this. But it
seems code paths for "untimed" AOs can be reused.
But there are still problems. For example, underruns will just happen
normally (and stop audio streaming), because we don't have a separate
heuristic to check whether the buffer is "low enough" (as a consequence
of a network stall, but before the audio output itself underruns).
Transparent windows on X11/EGL/native Mesa GL didn't work for various
reasons. From what I remember, the current code did work with nvidia at
least. Mesa has made attempts to fix this, but they never really made it
in.
But it turns out you can make EGL/Mesa list the EGLConfigs that use X11
RGBA visuals, and context_x11egl.c contains code that explicitly selects
them if alpha is requested (see pick_xrgba_config()).
The reason EGL/Mesa did not list them (and thus breaking transparency)
is because we requested a EGL_ALPHA_SIZE != 0 if alpha is requested. But
the transparent EGLConfigs use EGL_ALPHA_SIZE == 0. That's because EGL
doesn't actually support the concept of transparent windows; the alpha
size parameter is something else (memory rendering without FBOs or
something, I don't care enough to look up the real reasons).
This still won't work on Wayland. Every EGL backend needs platform
specific code. (Good job, EGL, such an awesome platform independent
standard.)
Fixes: #6590
Accepting ":" in addition to "," seems confusing and dumb. It only
causing problems when you want to pass a value that contains ":". Remove
support for ":", it is now treated like any other normal character. This
affects all options that are listed as "Key/value list" in the option
list.
It's possible that this breaks for someone who happened to use ":" as
separator. But this was undocumented, and never recommended. Originally,
the option treated many other characters in a special way, but this was
changed in commit a3d561f950. I'm, not sure why ":" was explicitly
included. Maybe because -the absurd -vf/--af syntax uses ":" as list
separator. But "," was always recommended and used in examples for
key/value options.
Fixes: #8021 (if you consider it a bug)
This allows users to control whether full dialogue subtitles are displayed
with an audio track already in their preferred subtitle language.
Additionally, this improves handling for the forced flag, automatically
selecting between forced and unforced subtitle streams based on the user's
settings and the selected audio.
Add support for reading a byte range from a stream via
the `slice://` protocol.
Syntax is `slice://start[-end]@URL` where end is a maximum
(read until end or eof).
Size suffixes support in `m_option` is reused so they can
be used with start/end.
This can be very useful with e.g. large MPEGTS streams with
corruption or time-stamp jumps or other issues in them.
Signed-off-by: Mohammad AlSaleh <CE.Mohammad.AlSaleh@gmail.com>
Make it possible to feed a string to stdin of a subprocess. Out of
laziness, it can't be an arbitrary byte string. (Would require adding an
option type that takes in a Lua byte string.)
Do not set stdin of a subprocess to fd 0 (i.e. mpv's stdin) anymore,
because it makes things more consistent. Enabling stdin didn't make too
much sense in the first place, so this behavior change seems
justifiable.
win32 support missing.
Fixes: #8003
Seems like this is requested all the time.
It seems libass allows out of range values, but does allows the subtitle
to go out of the screen at the bottom (only when moving it to the top
it's "clamped"). Too bad, don't do that then. The bitmap sub rendering
code on the other hand is under our control, and will not move a
subtitle out of the screen.
Fixes: #7986
Requested. Should be good for simple use cases. "sub2" is technically
inconsistent (since the option is called --secondary-sid), but fuck the
consistent name.
Uses the mechanism introduced in the previous commit. The hope was to
make auto-profiles easier to use, and to get rid of the need for
manually created inverse profiles. Not sure if the end result is useful.
Make it possible to restore from profiles by backing up the option
values before profile application. This is sort of like unapplying a
profile. Since there might be multiple ways to do this, a profile needs
to explicitly provide the "profile-restore" option, which specifies how
exactly this should be done.
This is a big mess. There is not natural way to do this. Profile
application is "destructive" and simply changes the values of the
options. Maybe one could argue that the option system should have
hierarchical "overlays" of profiles instead, where unset options will
use the value of the lower profiles. Options set interactively by the
user would be the top profile. Default values would be in the lowest
profile. You could unapply a profile by simply removing it from this
overlay stack.
But uh, let's not, so here's something stupid. It reuses some code used
for file local options to reduce code size. At least the overlay idea
would still be possible in theory, and could be added as another
profile-restore mode.
This is used by the following commit.
The callback now gets an object argument with defer/cont functions.
Like the lua code, the behavior is that each hook event allows at
most one continue, but nothing enforces the order of continuations
if more hook events arrive before prior ones were continued - which
is possible now with the defer option, but wasn't possible before
(continuation was synchronous from the hook event handler).
This can now opt to not continue a hook after the hook callback returns.
This makes it easier for scripts, and may make it unnecessary to run
reentrant event loops etc. for scripts that want to wait before
continuing while still running the event loop.
This is taken from a somewhat older proof-of-concept script. The basic
idea, and most of the implementation, is still the same. The way the
profiles are actually defined changed.
I still feel bad about this being a Lua script, and running user
expressions as Lua code in a vaguely defined environment, but I guess as
far as balance of effort/maintenance/results goes, this is fine.
It's a bit bloated (the Lua scripting state is at least 150KB or so in
total), so in order to enable this by default, I decided it should
unload itself by default if no auto-profiles are used. (And currently,
it does not actually rescan the profile list if a new config file is
loaded some time later, so the script would do nothing anyway if no auto
profiles were defined.)
This still requires defining inverse profiles for "unapplying" a
profile. Also this is still somewhat racy. Both will probably be
alleviated to some degree in the future.
scaletempo2 is a new audio filter for playing back
audio at modified speed and is based on chromium
commit 51ed77e3f37a9a9b80d6d0a8259e84a8ca635259.
It sounds subjectively better than the existing
implementions scaletempo and rubberband.
Add env and detach arguments. This means the command.c code must use the
"new" mp_subprocess2(). So also take this as an opportunity to clean up.
win32 support gets broken by it, because it never made the switch to the
newer function.
The new detach parameter makes the "run" command fully redundant, but I
guess we'll keep it for simplicity. But change its implementation to use
mp_subprocess2() (couldn't do this earlier, because win32).
Privately, I'm going to use the "env" argument to add a key binding that
starts a shell with a FILE environment variable set to the currently
playing file, so this is very useful to me.
Note: breaks windows, so for example youtube-dl on windows will not work
anymore. mp_subprocess2() has to be implemented. The old functions are
gone, and subprocess-win.c is not built anymore. It will probably work
on Cygwin.
This probably makes it much faster (I wouldn't know, I didn't run any
benchmarks ). Seems to work as well (although I'm not sure, it's not
like I'd perform rigorous tests).
The scale_zimg test seems to mysteriously treat color in fully
transparent alpha differently, which makes no sense, and isn't visible
(but makes the test fail). I can't be bothered with investigating this
more. What do you do with failing tests? Correct, you disable them. Or
rather, you disable whatever appears to cause them to fail, which is the
threading in this case.
This change follows mostly the tile_example.cpp. The slice size uses a
minimum of 64, which was suggested by the zimg author. Some of this
commit is a bit inelegant and weird, such as recomputing the scale
factor for every slice, or the way slice_h is managed. Too lazy to make
this more elegant.
zimg git had a regressio around active_region (which is needed by the
slicing), which was fixed in commit 83071706b2e6bc634. Apparently, the
bug was never released, so just add a warning to the manpage.
Mess this into the --geometry option, because I like to be
irresponsible. I considered adding a separate option, but at least this
allows me to defer the question how the hell this should work as
property (geometry simply and inherently does not).
Tested on IceWM only. Option equality test and string output not tested.
I'm tired of dealing with this frequent spawning of xdg-screensaver when
debugging and what not. xdg-screensaver was never a serious tool anyway,
it's more like some self-deprecating joke by FDO folks.
This will affect X11 on GNOME and other DEs. I'm singling out GNOME
though, because they are the ones actively sabotaging any sane
technical solutions and community cooperation.
I have been accused of taking it out on innocent GNOME users, while none
of this will reach GNOME developers. Of course that is not the
intention.
libplacebo exposes this feature already, because this particular type of
bug is unusually common in practice. Simply make use of it, by exposing
it as an option.
Could probably also bump the libplacebo minimum version to get rid of
the #if, but that would break debian oldoldstable or something.
Fixes#7867.
Apparently mpv supports loading config files from the same directory as
the mpv.exe. This is a fallback of some sort. It used the old_home
mechanism.
I want to add a warning if old_home exists, but that would always show
the warning on win32. Obviously we don't want that.
Add a separate exe_dir entry to deal with that.
Untested, but probably works.
XDG is stupid, so change back to the standard behavior. Unfortunately,
most users will now have the XDG one, so we will still need to load
this. (This is exactly the same problem as when XDG support was
introduced, just the other way around).
This should not affect any normal users. Hopefully I tested this well
enough; my intention is not to torment miserable XDG fans; they can keep
using their config dir if they want it.
This changes behavior in two cases:
- new users (now creates ~/.mpv/ instead of ~/.config/mpv/)
- users which have both directories
The latter case will behave subtly or obviously different, not sure.
Just fix your shit.
Extend the manpage with all the messy details, as far as I could reverse
engineer them from the code.
De-emphasize it, since a user should usually not use it. This _could_ be
used to make the cache seekable with --cache=no, but it's better and
more intuitive to use --cache=yes. As such, the only use of this is for
debugging. I'm not quite sure if this should be removed entirely, but I
still see some value in it (for example if you want the cache lookahead,
but you're using a stream where cache seeking is somehow broken).
Implementation copy/pasted from:
https://code.videolan.org/videolan/libplacebo/-/commit/f793fc0480f
This brings mpv's tone mapping more in line with industry standard
practices, for a hopefully more consistent result across the board.
Note that we ignore the black point adjustment of the tone mapping
entirely. In theory we could revisit this, if we ever make black point
compensation part of the mpv rendering pipeline.
This standard says we should use a value of 203 nits instead of 100 for
mapping between SDR and HDR.
Code copied from https://code.videolan.org/videolan/libplacebo/-/commit/9d9164773
In particular, that commit also includes a test case to make sure the
implementation doesn't break roundtrips.
Relevant to #4248 and #7357.
This affects "pull" AOs only: ao_alsa, ao_pulse, ao_openal, ao_pcm,
ao_lavc. There are changes to the other AOs too, but that's only about
renaming ao_driver.resume to ao_driver.start.
ao_openal is broken because I didn't manage to fix it, so it exits with
an error message. If you want it, why don't _you_ put effort into it? I
see no reason to waste my own precious lifetime over this (I realize the
irony).
ao_alsa loses the poll() mechanism, but it was mostly broken and didn't
really do what it was supposed to. There doesn't seem to be anything in
the ALSA API to watch the playback status without polling (unless you
want to use raw UNIX signals).
No idea if ao_pulse is correct, or whether it's subtly broken now. There
is no documentation, so I can't tell what is correct, without reverse
engineering the whole project. I recommend using ALSA.
This was supposed to be just a simple fix, but somehow it expanded scope
like a train wreck. Very high chance of regressions, but probably only
for the AOs listed above. The rest you can figure out from reading the
diff.
This simply printf()s a concatenation of the provided string and the
relevant escape sequences. No idea what exactly defines this escape
sequence (is it just a xterm thing that is now supported relatively
widely?), and this simply uses information provided on the linked github
issue.
Not much of an advantage over --term-status-msg, though at least this
can have a lower update frequency. Also I may consider setting a default
value, and then it shouldn't conflict with the status message.
Fixes: #1725
This mode drops or repeats audio data to adapt to video speed, instead
of resampling it or such. It was added to deal with SPDIF. The
implementation was part of fill_audio_out_buffers() - the entire
function is something whose complexity exploded in my face, and which I
want to clean up, and this is hopefully a first step.
Put it in a filter, and mess with the shitty glue code. It's all sort of
roundabout and illogical, but that can be rectified later. The important
part is that it works much like the resample or scaletempo filters.
For PCM audio, this does not work on samples anymore. This makes it much
worse. But for PCM you can use saner mechanisms that sound better. Also,
something about PTS tracking is wrong. But not wasting more time on
this.
Can be useful to force it to adapt to extreme speed changes, while a
higher limit would just use a fraction closer to the original video
speed.
Probably useful for testing only.
Remove the vaguely defined plane_bits and component_bits fields from
struct mp_imgfmt_desc. Add weird replacements for existing uses. Remove
the bytes[] field, replace uses with bpp[].
Fix some potential alignment issues in existing code. As a compromise,
split mp_image_pixel_ptr() into 2 functions, because I think it's a bad
idea to implicitly round, but for some callers being slightly less
strict is convenient.
This shouldn't really change anything. In fact, it's a 100% useless
change. I'm just cleaning up what I started almost 8 years ago (see
commit 00653a3eb0). With this I've decided to keep mp_imgfmt_desc,
just removing the weird parts, and keeping the saner parts.
Before this, we pretty much guaranteed that --mpv-ipc-fd=3 would be
passed. The FD was hardcoded, so scripts started by this mechanism
didn't need to actually parse the argument. Change this to using a
mostly random FD number instead.
I decided to do this because posix_spawnp() and the current replacement
cannot "guarantee" a FD layout. posix_spawn_file_actions_adddup2() just
runs dup2() calls, so it may be hard to set FD 3/4 if they are already
used by something else. For example imagine trying to map:
{.fd = 3, .src_fd = 4},
{.fd = 4, .src_fd = 3},
Then it'd do dup2(4, 3), dup2(3, 4) (reminder: dup2(src, dst)), and the
end result is that FD 4 really maps to the original FD 4.
While this was not a problem in the present code, it's too messy that I
don't want to pretend it can always done this way without an unholy
mess. So my assumption is that FDs 0-2 can be freely assigned because
they're never closed (probably...), while for all other FDs only
pass-through is reasonable.
See manpage additions. This was requested, sort of. Although what has
been requested might be something completely different. So this is
speculative.
This also changes sub_get_text() to return an allocated copy, because
the buffer shit was too damn messy.
As discussed in the referenced issue. This is quite a behavior change,
bit since this option is new, and not included in any releases yet, I
think it's OK.
Fixes: #7648
This isn't useful anymore. We have a much better d3d11 renderer in
vo_gpu. D3D11 is available in all supported Windows versions. The
StretchRect path might still be useful for someone (???), and leaving it
at least evades conflict about users who want to keep using this VO for
inexplicable reasons. (Low power usage might be a justified reason, but
still, no.)
Also fuck the win32 platform, it's a heap of stinky shit. Microsoft is
some sort of psycho clown software company. Granted, maybe still better
than much of the rest of Silly Con Valley.
By default --sub-auto uses "exact". This was far from an "exact" match,
because it added anything that started with the video filename (without
extension), and seemed to end in something that looked like a language
code.
Make this stricter. "exact" still tolerate a language code, but the
video's filename must come before it without any unknown extra
characters. This may not load subtitles in some situations where it
previously did, and where the user might think that the naming
convention is such that it should be considered an exact match.
The subtitle priority sorting seems a bit worthless. I suppose it may
have some value in higher "fuzz" modes (like --sub-auto=fuzzy).
Also remove the mysterious "prio += prio;" line. I probably shouldn't
have checked, but it goes back to commit f16fa9d31 (2003), where someone
wanted to "refine" the priority without changing the rest of the code or
something.
Mostly untested, so have fun.
Fixes: #7702
This is mostly for testing. It adds passing through the metadata through
the video chain. The metadata can be manipulated with vf_format. Support
for zimg alpha conversion (if built with zimg after it gained alpha
support) is implemented. Support premultiplied input in vo_gpu.
Some things still seem to be buggy.
