the casts of the argument to unsigned int suppressed diagnosis of
errors like passing a pointer instead of a character. putting the
actual function call in an unreachable branch restores any diagnostics
that would be present if the macros didn't exist and functions were
used.
the braf instruction's destination register is an offset from the
address of the braf instruction plus 4 (or equivalently, the address
of the next instruction after the delay slot). the code for dlsym was
incorrectly computing the offset to pass using the address of the
delay slot itself. in other places, a label was placed after the delay
slot, but I find this confusing. putting the label on the branch
instruction itself, and manually adding 4, makes it more clear which
branch the offset in the constant pool goes with.
the conventional way to implement sigsetjmp is to save the signal mask
then tail-call to setjmp; siglongjmp then restores the signal mask and
calls longjmp. the problem with this approach is that a signal already
pending, or arriving between unmasking of signals and restoration of
the saved stack pointer, will have its signal handler run on the stack
that was active before siglongjmp was called. this can lead to
unbounded stack usage when siglongjmp is used to leave a signal
handler.
in the new design, sigsetjmp saves its own return address inside the
extended part of the sigjmp_buf (outside the __jmp_buf part used by
setjmp) then calls setjmp to save a jmp_buf inside its own execution.
it then tail-calls to __sigsetjmp_tail, which uses the return value of
setjmp to determine whether to save the current signal mask or restore
a previously-saved mask.
as an added bonus, this design makes it so that siglongjmp and longjmp
are identical. this is useful because the __longjmp_chk function we
need to add for ABI-compatibility assumes siglongjmp and longjmp are
the same, but for different reasons -- it was designed assuming either
can access a flag just past the __jmp_buf indicating whether the
signal masked was saved, and act on that flag. however, early versions
of musl did not have space past the __jmp_buf for the non-sigjmp_buf
version of jmp_buf, so our setjmp cannot store such a flag without
risking clobbering memory on (very) old binaries.
previously, the dynamic tlsdesc lookup functions and the i386
special-ABI ___tls_get_addr (3 underscores) function called
__tls_get_addr when the slot they wanted was not already setup;
__tls_get_addr would then in turn also see that it's not setup and
call __tls_get_new.
calling __tls_get_new directly is both more efficient and avoids the
issue of calling a non-hidden (public API/ABI) function from asm.
for the special i386 function, a weak reference to __tls_get_new is
used since this function is not defined when static linking (the code
path that needs it is unreachable in static-linked programs).
applying the attribute to a weak_alias macro was a hack. instead use a
separate declaration to apply the visibility, and consolidate
declarations together to avoid having visibility mess all over the
file.
in a few places, non-hidden symbols were referenced from asm in ways
that assumed ld-time binding. while these is no semantic reason these
symbols need to be hidden, fixing the references without making them
hidden was going to be ugly, and hidden reduces some bloat anyway.
in the asm files, .global/.hidden directives have been moved to the
top to unclutter the actual code.
at the point of call it was declared hidden, but the definition was
not hidden. for some toolchains this inconsistency produced textrels
without ld-time binding.
the zero initialization is redundant since decode_vec does its own
clearing, and it increases the risk that buggy compilers will generate
calls to memset. as long as symbols are bound at ld time, such a call
will not break anything, but it may be desirable to turn off ld-time
binding in the future.
this was already essentially possible as a result of the previous
commits changing the dynamic linker/thread pointer bootstrap process.
this commit mainly adds build system infrastructure:
configure no longer attempts to disable stack protector. instead it
simply determines how so the makefile can disable stack protector for
a few translation units used during early startup.
stack protector is also disabled for memcpy and memset since compilers
(incorrectly) generate calls to them on some archs to implement
struct initialization and assignment, and such calls may creep into
early initialization.
no explicit attempt to enable stack protector is made by configure at
this time; any stack protector option supported by the compiler can be
passed to configure in CFLAGS, and if the compiler uses stack
protector by default, this default is respected.
since 1.1.0, musl has nominally required a thread pointer to be setup.
most of the remaining code that was checking for its availability was
doing so for the sake of being usable by the dynamic linker. as of
commit 71f099cb7d, this is no longer
necessary; the thread pointer is now valid before any libc code
(outside of dynamic linker bootstrap functions) runs.
this commit essentially concludes "phase 3" of the "transition path
for removing lazy init of thread pointer" project that began during
the 1.1.0 release cycle.
this allows the dynamic linker itself to run with a valid thread
pointer, which is a prerequisite for stack protector on archs where
the ssp canary is stored in TLS. it will also allow us to remove some
remaining runtime checks for whether the thread pointer is valid.
as long as the application and its libraries do not require additional
size or alignment, this early thread pointer will be kept and reused
at runtime. otherwise, a new static TLS block is allocated after
library loading has finished and the thread pointer is switched over.
previously, the layout of the static TLS block was perturbed by the
size of the dtv; dtv size increasing from 0 to 1 perturbed both TLS
arch types, and the TLS-above-TP type's layout was perturbed by the
specific number of dtv slots (libraries with TLS). this behavior made
it virtually impossible to setup a tentative thread pointer address
before loading libraries and keep it unchanged as long as the
libraries' TLS size/alignment requirements fit.
the new code fixes the location of the dtv and pthread structure at
opposite ends of the static TLS block so that they will not move
unless size or alignment changes.
previously a new GDT slot was requested, even if one had already been
obtained by a previous call. instead extract the old slot number from
GS and reuse it if it was already set. the formula (GS-3)/8 for the
slot number automatically yields -1 (request for new slot) if GS is
zero (unset).
this overhaul further reduces the amount of arch-specific code needed
by the dynamic linker and removes a number of assumptions, including:
- that symbolic function references inside libc are bound at link time
via the linker option -Bsymbolic-functions.
- that libc functions used by the dynamic linker do not require
access to data symbols.
- that static/internal function calls and data accesses can be made
without performing any relocations, or that arch-specific startup
code handled any such relocations needed.
removing these assumptions paves the way for allowing libc.so itself
to be built with stack protector (among other things), and is achieved
by a three-stage bootstrap process:
1. relative relocations are processed with a flat function.
2. symbolic relocations are processed with no external calls/data.
3. main program and dependency libs are processed with a
fully-functional libc/ldso.
reduction in arch-specific code is achived through the following:
- crt_arch.h, used for generating crt1.o, now provides the entry point
for the dynamic linker too.
- asm is no longer responsible for skipping the beginning of argv[]
when ldso is invoked as a command.
- the functionality previously provided by __reloc_self for heavily
GOT-dependent RISC archs is now the arch-agnostic stage-1.
- arch-specific relocation type codes are mapped directly as macros
rather than via an inline translation function/switch statement.
this global lock allows certain unlock-type primitives to exclude
mmap/munmap operations which could change the identity of virtual
addresses while references to them still exist.
the original design mistakenly assumed mmap/munmap would conversely
need to exclude the same operations which exclude mmap/munmap, so the
vmlock was implemented as a sort of 'symmetric recursive rwlock'. this
turned out to be unnecessary.
commit 25d12fc0fc already shortened the
interval during which mmap/munmap held their side of the lock, but
left the inappropriate lock design and some inefficiency.
the new design uses a separate function, __vm_wait, which does not
hold any lock itself and only waits for lock users which were already
present when it was called to release the lock. this is sufficient
because of the way operations that need to be excluded are sequenced:
the "unlock-type" operations using the vmlock need only block
mmap/munmap operations that are precipitated by (and thus sequenced
after) the atomic-unlock they perform while holding the vmlock.
this allows for a spectacular lack of synchronization in the __vm_wait
function itself.
as a result of commit 12e1e32468, kernel
processing of the robust list is only needed for process-shared
mutexes. previously the first attempt to lock any owner-tracked mutex
resulted in robust list initialization and a set_robust_list syscall.
this is no longer necessary, and since the kernel's record of the
robust list must now be cleared at thread exit time for detached
threads, optimizing it out is more worthwhile than before too.
the robust list head lies in the thread structure, which is unmapped
before exit for detached threads. this leaves the kernel unable to
process the exiting thread's robust list, and with a dangling pointer
which may happen to point to new unrelated data at the time the kernel
processes it.
userspace processing of the robust list was already needed for
non-pshared robust mutexes in order to perform private futex wakes
rather than the shared ones the kernel would do, but it was
conditional on linking pthread_mutexattr_setrobust and did not bother
processing the pshared mutexes in the list, which requires additional
logic for the robust list pending slot in case pthread_exit is
interrupted by asynchronous process termination.
the new robust list processing code is linked unconditionally (inlined
in pthread_exit), handles both private and shared mutexes, and also
removes the kernel's reference to the robust list before unmapping and
exit if the exiting thread is detached.
depending on the compiler's interpretation of __asm__ register names
for register class objects, it may be possible for the return value in
r2 to be clobbered by the function call to __stat_fix. I have not
observed any such breakage in normal builds and suspect it only
happens with -O0 or other unusual build options, but since there's an
ambiguity as to the semantics of this feature, it's best to use an
explicit temporary to avoid the issue.
based on reporting and patch by Eugene.
when dlopen fails, all partially-loaded libraries need to be unmapped
and freed. any of these libraries using an rpath with $ORIGIN
expansion may have an allocated string for the expanded rpath;
previously, this string was not freed when freeing the library data
structures.
this change hardens the dynamic linker against the possibility of
loading the wrong library due to inability to expand $ORIGIN in rpath.
hard failures such as excessively long paths or absence of /proc (when
resolving /proc/self/exe for the main executable's origin) do not stop
the path search, but memory allocation failures and any other
potentially transient failures do.
to implement this change, the meaning of the return value of
fixup_rpath function is changed. returning zero no longer indicates
that the dso's rpath string pointer is non-null; instead, the caller
needs to check. a return value of -1 indicates a failure that should
stop further path search.
the C standard specifies that setjmp is a macro, but longjmp is a
normal function. a macro version of it would be permitted (albeit
useless) for C (not C++), but would have to be a function-like macro,
not an object-like one.
transient errors during the path search should not allow the search to
continue and possibly open the wrong file. this patch eliminates most
conditions where that could happen, but there is still a possibility
that $ORIGIN-based rpath processing will have an allocation failure,
causing the search to skip such a path. fixing this is left as a
separate task.
a small bug where overly-long path components caused an infinite loop
rather than being skipped/ignored is also fixed.
while it's the same for all presently supported archs, it differs at
least on sparc, and conceptually it's no less arch-specific than the
other O_* macros. O_SEARCH and O_EXEC are still defined in terms of
O_PATH in the main fcntl.h.
POSIX requires the sem_nsems member to have type unsigned short. we
have to work around the incorrect kernel type using matching
endian-specific padding.
The shm_info struct is a gnu extension and some of its members do
not have shm* prefix. This is worked around in sys/shm.h by macros,
but aarch64 didn't use those.
Internally regcomp needs to copy some iteration nodes before
translating the AST into TNFA representation.
Literal nodes were not copied correctly: the class type and list
of negated class types were not copied so classes were ignored
(in the non-negated case an ignored char class caused the literal
to match everything).
This affects iterations when the upper bound is finite, larger
than one or the lower bound is larger than one. So eg. the EREs
[[:digit:]]{2}
[^[:space:]ab]{1,4}
were treated as
.{2}
[^ab]{1,4}
The fix is done with minimal source modification to copy the
necessary fields, but the AST preparation and node handling
code of tre will need to be cleaned up for clarity.
The valid BRE backref tokens are \1 .. \9, and 0 is not a special
character either so \0 is undefined by the standard.
Such undefined escaped characters are treated as literal characters
currently, following existing practice, so \0 is the same as 0.
commit 559de8f5f0 redefined FLT_ROUNDS
to use an external function that can report the actual current
rounding mode, rather than always reporting round-to-nearest. however,
float.h did not include 'extern "C"' wrapping for C++, so C++ programs
using FLT_ROUNDS ended up with an unresolved reference to a
name-mangled C++ function __flt_rounds.
one stop condition for parsing abbreviated ipv6 addressed was missed,
allowing the internal ip[] buffer to overflow. this patch adds the
missing stop condition and masks the array index so that, in case
there are any remaining stop conditions missing, overflowing the
buffer is not possible.
one of the features of ERE is that it's actually a regular language
and does not admit expressions which cannot be matched in linear time.
introduction of \n backref support into regcomp's ERE parsing was
unintentional.
the regex parser handles the (undefined) case of an unexpected byte
following a backslash as a literal. however, instead of correctly
decoding a character, it was treating the byte value itself as a
character. this was not only semantically unjustified, but turned out
to be dangerous on archs where plain char is signed: bytes in the
range 252-255 alias the internal codes -4 through -1 used for special
types of literal nodes in the AST.
