This simply writes the file name as a comment to the top of the watch later
config file.
It can be useful to the user for determining whether a watch later config file
can be manually removed (e.g. in case the corresponding media file has been
deleted) or not.
If a single person complains, I will readd it. But I don't expect that
this will happen.
The main reason for removing this is that it's some of the most unclean
code remaining, it's unmaintained, and I've never ever heard of someone
using it.
Commit e2e450f9 started making use of luaL_register(), but OF COURSE
this function disappeared in Lua 5.2, and was replaced with a 5.2-only
alternative, slightly different mechanism.
So just NIH our own function. This is actually slightly more correct,
since it forces the user to call "require" to actually make the module
visible for builtin C-only modules other than "mp". Fix autoload.lua
accordingly.
We need this only because Lua's stdlib is so scarce. Lua doesn't intend
to include a complete stdlib - they confine themselves to standard C,
both for portability reasons and to keep the code minimal. But standard
C does not provide much either.
It would be possible to use Lua POSIX wrapper libraries, but that would
be a messy (and unobvious) dependency. It's better to implement the
missing functions ourselves, as long as they're small in number.
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
The quit command has an optional argument that is used as exit code.
Extend that to the quit_watch_later command. Actually, unify the
implementations of the two commands.
Requested in #798.
Some options change from percentages to number of kilobytes; there are
no cache options using percentages anymore.
Raise the default values. The cache is now 25000 kilobytes, although if
your connection is slow enough, the maximum is probably never reached.
(Although all the memory will still be used as seekback-cache.)
Remove the separate --audio-file-cache option, and use the cache default
settings for it.
Try to get the "new" code path (using NetWM/EWMH) free of hacks done for
the sake of old WMs or the no-WM case.
Implement --fs-screen using _NET_WM_FULLSCREEN_MONITORS.
VapourSynth won't just filter multiple frames at once on its own. You
have to request multiple frames at once manually. This is what this
commit introduces: a sub-option controls how many frames will be
requested at once. This also changes the semantics of the maxbuffer sub-
option, now renamed to buffered-frames.
The situation has changed a bit since the days of mplayer2, so we can
use more/less diplomatic wording. Merge the two sections listing
changes from MPlayer and mplayer2. Mention the client API and Lua
scripting as alternatives to slave mode.
I'm calling MPlayer code "horrible". This is not meant as an offense,
but after turning around almost every line of MPlayer code, I believe
I have a right to say this. Sorry. I would say that MPlayer has a
surprisingly sane and simple architecture (for what it is), but much
of it drowned under a load of evil hacks or not-cleaned-up-yet code.
These are now equivalent to combining commands with the "cycle pause" or
"set pause" commands, and thus are not needed anymore. They were also
obscure and undocumented.
The many "boxes" in this entry were causing rst2pdf to fail because it
couldn't figure out where to break the page. Make the boxes smaller by
removing semi-redundant examples. Also try and make surrounding text a
little shorter by rewording.
This is done after filters, so things like framerate-doubling
deinterlacing is accounted for.
Unfortunately, framedropping can cause inaccuracies (especially after
precise seeks), and we can't really know when that happens. Even though
we know that the decoder might drop a frame if we request it to do so,
we don't know when the dropped frame will start or stop affecting the
video filter chain. Video filters can have frames buffered, and we
can't tell at which point the dropped frame would have been output.
It's not even possible to mark a discontinuity after seek, because
again we don't know if the filter chain still has the discontinuity
within its buffers.
So we have to live with the fact that the output of this property can
be completely broken after seek, unless --no-hr-seek-framedrop is used.
This allows disabling of decoder framedrop during hr-seek.
It's basically another useless option, but it will help exploring
whether this framedropping really makes seeking faster, or whether
disabling it helps with precise seeking (especially frame backstepping).
Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
This affects the return value of mp.script_name, the "client name"
(what's returned by mpv_client_name()) and all associated features, as
well as the mpv terminal output module prefix when scripts print
something.
As discussed in #748.
Set _DurationNum/_DurationDen on each VS frame, instead of
_AbsoluteTime. The duration is the difference between the timestamp of
the frame and the next frame, and when receiving filtered VS frames, we
convert them back to an absolute PTS by summing them.
We pass the timestamps with microsecond resolution. mpv uses double for
timestamps internally, so we don't know the "real" timebase or FPS. VS
on the other hand uses fractions for frame durations. We can't pass
through the numbers exactly, but microseconds ought to be enough to be
even safe from accumulating rounding errors.
This allows client API users and Lua scripts to side-step the pretty
horrible video filter string "language" (although it's back and can't be
avoided when using libavfilter).
This couldn't rotate by 180°. Add this, and also make the parameter in
degrees, instead of magic numbers.
For now, drop the flipping stuff. You can still flip with --vf=flip or
--vf=mirror. Drop the landscape/portrait stuff - I think this is
something almost nobody will use. If it turns out that we need some of
these things, they can be readded later.
Make it use libavfilter. Its vf_transpose implementation looks pretty
simple, except that it uses slice threading and should be much faster.
Often, user configs set options that are not suitable for encoding.
Usually, playback and encoding are pretty different things, so it makes
sense to keep them strictly separate. There are several possible
solutions. The approach taken by this commit is to basically ignore the
default config settings, and switch to an [encoding] config profile
section instead. This also makes it impossible to have --o in a config
file, because --o enables encode mode.
See github issue #727 for discussion.
This can be used to easily extent the status line for one's own needs.
I'm not experienced with lua so a few things could probably be done a
better way.
This is for the sake of multi-key combinations (see github issue #718).
Now a multi-key sequence isn't matched if any of the previous keys were
actually mapped.
The window close button is usually mapped to the CLOSE_WIN pseudo-key.
Until now, --input-test treated this pseudo-key like any other key (like
the rest of the input handling code), so you couldn't close the window
in this mode. The manpage had silly instructions and warnings how to
deal with this.
Just always quit when CLOSE_WIN is received, and improve the
instructions.
The input code always supported combinations of multiple keys (even in
MPlayer, although there the code was active really only for mouse
buttons). This was arcance and also made the code more complicated. I
only know of a single person who ever made use of this feature.
Remove this feature, and repurpose some of the support code (e.g.
parsing, display of key combinations, etc.) to handle such multi-
combinations as sequences, instead of keys to be pressed at the same
time. This is much simpler and implements the feature requested in
github issue #718.
This commit will probably cause a bunch of regressions, since the input
handling code has some weird corner cases. I couldn't find any problems
when testing, though.
This collects statistics and other things. The option dumps raw data
into a file. A script to visualize this data is included too.
Litter some of the player code with calls that generate these
statistics.
In general, this will be helpful to debug timing dependent issues, such
as A/V sync problems. Normally, one could argue that this is the task of
a real profiler, but then we'd have a hard time to include extra
information like audio/video PTS differences. We could also just
hardcode all statistics collection and processing in the player code,
but then we'd end up with something like mplayer's status line, which
was cluttered and required a centralized approach (i.e. getting the data
to the status line; so it was all in mplayer.c). Some players can
visualize such statistics on OSD, but that sounds even more complicated.
So the approach added with this commit sounds sensible.
The stats-conv.py script is rather primitive at the moment and its
output is semi-ugly. It uses matplotlib, so it could probably be
extended to do a lot, so it's not a dead-end.
And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE.
The real pause state can now be queried with the "core-idle" property,
the user pause state with the "pause" property, whether the player is
paused due to cache with "paused-for-cache", and the keep open event can
be guessed with the "eof-reached" property.
This property is set to "yes" if playback was paused due to --keep-open.
The change notification might not always be perfect; maybe that should
be improved.
Currently this is (probably) equivalent to "paused-for-cache", but the
latter is a bit special, while this new property is a bit more general.
One case where they might actually be different is dvdnav menus, but I
haven't checked.
Also add property change notifications for these two properties.
This re-allows the previous behaviour of being able to reencode with
metadata removed, which is useful when encoding "inconsistently" tagged
data for a device/player that shows file names when tags are not
present.
Before this commit, the filter attempted to keep the vsscript state
(p->se) even when the script was reloaded. Change it to destroy the
script state too on reloading. Now no workaround for LoadPlugin is
necessary, and this also fixes a weird theoretical race condition when
destroying and recreating the mpv source filter.
This is a read-only property that uses VFCTRL_GET_METADATA
to retrieve mp_tags metadata from a filter specified by label
Signed-off-by: wm4 <wm4@nowhere>
This is needed if you want to reimplement the status line in lua
I could only test drop-frame-count because I didn't find an easy way to
trigger paused-for-cache and total-avsync-change
Signed-off-by: wm4 <wm4@nowhere>
Mainly meant to apply simple VapourSynth filters to video at runtime.
This has various restrictions, which are listed in the manpage.
Additionally, this actually copies video frames when converting frame
references from mpv to VapourSynth, and a second time when going from
VapourSynth to mpv. This is inefficient and could probably be easily
improved. But for now, this is simpler, and in fact I'm not sure if
we even can references VapourSynth frames after the core has been
destroyed.
The only tricky part is keeping the cache contents, which is made simple
by allocating the new cache while still keeping the old cache around,
and then copying the old data.
To explain the "Don't use this when playing DVD or Bluray." comment: the
cache also associates timestamps to blocks of bytes, but throws away the
timestamps on seek. Thus you will experience strange behavior after
resizing the cache until the old cached region is exhausted.
Now they can be paused and resumed.
Since pausing and disabling the timer is essentially the same underlying
operation, we also just provide one method for it.
mp.cancel_timer probably still works, but I'm considering this
deprecated, and it's removed from the manpage. (We didn't have a release
with this function yet, so no formal deprecation.)
