Previously, the script would throw garbage (ASS tags) at the terminal
when the bound key was pressed. This changes the behaviour to _not_
print any ASS tags (and replace those which can be interpreted by the
terminal) if there's no video.
I cleaned the patch up since you mentioned you were busy. As I said
before, there is absolutely no problem with calling mpv to display
strings to the OSD without any video. They'll just go straight to the
terminal just as they would with an active VO.
Seems absurd to keep this under GPL, since it's only a tiny code
fragment (that would always look the same, no matter if you rewrote it
independently), but now I got proper permission from the original author
anyway.
Under some conditions, hide_osc() was calling render(), which then called
hide_osc() again, and so forth, until the stack overflows.
Tracking the exact conditions where this happens (and then managing them
to prevent it) is an excercise in futility.
Remove the osc directly - instead of going through the entire rendering
procedure just to end up rendering nothing.
Fixes#4900 .
Also implicitly fixes memory leak when mp.set_property_native was used,
because the cleanup did not expect more allocations from the accidental
use of mpv_get_property.
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
This code could not be relicensed. The intention was to write new filter
code (which could handle both audio and video), but that's a bit of
work. Write some code that can do audio conversion (resampling,
downmixing, etc.) without the old audio filter chain code in order to
speed up the LGPL relicensing.
If you build with --disable-libaf, nothing in audio/filter/* is compiled
in. It breaks a few features, such as --volume, --af, pitch correction
on speed changes, replaygain.
Most likely this adds some bugs, even if --disable-libaf is not used.
(How the fuck does EOF notification work again anyway?)
Just reimplement it in some way, as mp_audio is GPL-only.
Actually I wanted to get rid of audio_buffer.c completely (and instead
have a list of mp_aframes), but to do so would require rewriting some
more player core audio code. So to get this LGPL relicensing over
quickly, just do some extra work.
This mechanism uses system() and shouldn't even exist. x11_common.c has
its own solution for the original problem (disabling Linux DE
screensavers without MPlayer/mpv having to link a dbus lib). If that is
not sufficient, you can create a simple Lua script.
Incidentally fixes#4888.
This is around 512 kB, which is just way too much. Heap-allocate it
instead. Also cut down the max pass count to 64, since 128 was
unrealistically high even for vo_opengl.
This was needlessly complicated and prone to breakage, because even the
references to the ring buffer could end up getting invalidated and
containing garbage data on e.g. shader cache flush. For much the same
reason why we can't keep around the *timer_pool, we're also forced to
hard-copy the entire sample buffer per pass per frame.
Not a huge deal, though. This is, what, a few kB per frame? We have more
pressing CPU performance concerns anyway.
Also simplified/fixed some other code.
Ever since the mp_aframe change, audio mid-stream format changes crash.
I have no idea why the recent mp_aframe change triggers this. Didn't
look too deeply into it either. It appears to work now, though.
Fixes#4828.
Mouse wheel bindings have always been a cause of user confusion.
Previously, on Wayland and macOS, precise touchpads would generate AXIS
keycodes and notched mouse wheels would generate mouse button keycodes.
On Windows, both types of device would generate AXIS keycodes and on
X11, both types of device would generate mouse button keycodes. This
made it pretty difficult for users to modify their mouse-wheel bindings,
since it differed between platforms and in some cases, between devices.
To make it more confusing, the keycodes used on Windows were changed in
18a45a42d5 without a deprecation period or adequate communication to
users.
This change aims to make mouse wheel binds less confusing. Both the
mouse button and AXIS keycodes are now deprecated aliases of the new
WHEEL keycodes. This will technically break input configs on Wayland and
macOS that assign different commands to precise and non-precise scroll
events, but this is probably uncommon (if anyone does it at all) and I
think it's a fair tradeoff for finally fixing mouse wheel-related
confusion on other platforms.
mpv's mouse button numbering is based on X11 button numbering, which
allows for an arbitrary number of buttons and includes mouse wheel input
as buttons 3-6. This button numbering was used throughout the codebase
and exposed in input.conf, and it was difficult to remember which
physical button each number actually referred to and which referred to
the scroll wheel.
In practice, PC mice only have between two and five buttons and one or
two scroll wheel axes, which are more or less in the same location and
have more or less the same function. This allows us to use names to
refer to the buttons instead of numbers, which makes input.conf syntax a
lot easier to remember. It also makes the syntax robust to changes in
mpv's underlying numbering. The old MOUSE_BTNx names are still
understood as deprecated aliases of the named buttons.
This changes both the input.conf syntax and the MP_MOUSE_BTNx symbols in
the codebase, since I think both would benefit from using names over
numbers, especially since some platforms don't use X11 button numbering
and handle different mouse buttons in different windowing system events.
This also makes the names shorter, since otherwise they would be pretty
long, and it removes the high-numbered MOUSE_BTNx_DBL names, since they
weren't used.
Names are the same as used in Qt:
https://doc.qt.io/qt-5/qt.html#MouseButton-enum
Commit 03cf150ff3 accidentally dropped these. Readd them in a simpler
way (so only a property_osd_display[] entry is enough). This commit
doesn't actually touch the video equalizer properties, because the
default value of 0 for the marker is what they require anyway.
This removes all GPL only code from it, and that's the whole purpose.
Also happens to be much simpler.
The "deinterlace" option still sort of exists, but only as runtime
changeable option. The main change in behavior is that the property will
not report back the actual deint state. Or in other words, if inserting
or initializing the filter fails, the deinterlace property will still
return "yes". This is in line with most recent behavior changes to
properties and options.
I really wouldn't care much about this, but some parts of the core code
are under HAVE_GPL, so there's some need to get rid of it. Simply turn
the video equalizer from its current fine-grained handling with vf/vo
fallbacks into global options. This makes updating them much simpler.
This removes any possibility of applying video equalizers in filters,
which affects vf_scale, and the previously removed vf_eq. Not a big
loss, since the preferred VOs have this builtin.
Remove video equalizer handling from vo_direct3d, vo_sdl, vo_vaapi, and
vo_xv. I'm not going to waste my time on these legacy VOs.
vo.eq_opts_cache exists _only_ to send a VOCTRL_SET_EQUALIZER, which
exists _only_ to trigger a redraw. This seems silly, but for now I feel
like this is less of a pain. The rest of the equalizer using code is
self-updating.
See commit 96b906a51d for how some video equalizer code was GPL only.
Some command line option names and ranges can probably be traced back to
a GPL only committer, but we don't consider these copyrightable.
So far, we had a thread-safe way to read options, but no option update
notification mechanism. Everything was funneled though the main thread's
central mp_option_change_callback() function. For example, if the
panscan options were changed, the function called vo_control() with
VOCTRL_SET_PANSCAN to manually notify the VO thread of updates. This
worked, but's pretty inconvenient. Most of these problems come from the
fact that MPlayer was written as a single-threaded program.
This commit works towards a more flexible mechanism. It adds an update
callback to m_config_cache (the thing that is already used for
thread-safe access of global options).
This alone would still be rather inconvenient, at least in context of
VOs. Add another mechanism on top of it that uses mp_dispatch_queue, and
takes care of some annoying synchronization issues. We extend
mp_dispatch_queue itself to make this easier and slightly more
efficient.
As a first application, use this to reimplement certain VO scaling and
renderer options. The update_opts() function translates these to the
"old" VOCTRLs, though.
An annoyingly subtle issue is that m_config_cache's destructor now
releases pending notifications, and must be released before the
associated dispatch queue. Otherwise, it could happen that option
updates during e.g. VO destruction queue or run stale entries, which is
not expected.
Rather untested. The singly-linked list code in dispatch.c is probably
buggy, and I bet some aspects about synchronization are not entirely
sane.
This is pretty pointless, but I believe it allows us to claim that the
new code is not affected by the copyright of the old code. This is
needed, because the original mp_audio struct was written by someone who
has disagreed with LGPL relicensing (it was called af_data at the time,
and was defined in af.h).
The "GPL'ed" struct contents that surive are pretty trivial: just the
data pointer, and some metadata like the format, samplerate, etc. - but
at least in this case, any new code would be extremely similar anyway,
and I'm not really sure whether it's OK to claim different copyright. So
what we do is we just use AVFrame (which of course is LGPL with 100%
certainty), and add some accessors around it to adapt it to mpv
conventions.
Also, this gets rid of some annoying conventions of mp_audio, like the
struct fields that require using an accessor to write to them anyway.
For the most part, this change is only dumb replacements of mp_audio
related functions and fields. One minor actual change is that you can't
allocate the new type on the stack anymore.
Some code still uses mp_audio. All audio filter code will be deleted, so
it makes no sense to convert this code. (Audio filters which are LGPL
and which we keep will have to be ported to a new filter infrastructure
anyway.) player/audio.c uses it because it interacts with the old filter
code. push.c has some complex use of mp_audio and mp_audio_buffer, but
this and pull.c will most likely be rewritten to do something else.
Refresh seeks are automatically issued when changing filters, which
improves user experience if these filters change buffering or such.
The refresh seek could actually overwrite a previously ongoing seek:
set pause yes
set time-pos 10
set vf ""
Here, the video code issued a refresh seek to the previous video
position, which could be different from the previously triggered (and
still ongoing) seek, this overwriting the seek.
Factor all refresh seek handling into a new function, and make it handle
ongoing seeks correctly.
Remove the weird new canonical_pts field, which actually had no use.
Fixes#4757.
Commit f1d161d55f accidentally added the handle_force_window() call if
no track is selected.
This was OK, but breaks something like "mpv *", where some files are not
playable (like subtitle files) - the unplayable files would remove and
recreate the VO window, which is annoying.
Just drop the call again.
This oddly triggers bogus EOF when switching filter graphs between two
audio files (in this case, "[vid1]f[vo];[aid2]f[ao]"->"[aid1]f[ao]",
with aid2 being an external audio source).
This commit also fixes desync when seeking with an external file
connected via --lavfi-complex.
(Yes, the audio resync code is cursed.)
Tends to be somewhat glitchy if subtitles are enabled, and you enable
and disable tracks.
On error, this will disable --lavfi-complex, which will result in
whatever behavior.
Commit 0e0b87b6f3 fixed that dropped packets did not trigger further
work correctly. But it also made trivial --lavfi-complex freeze. The
reason is that the meaning if DATA_AGAIN was overloaded: the decoders
meant that they should be called again, while lavfi.c meant that other
outputs needed to be checked again. Rename the latter meaning to
DATA_STARVE, which means that the current input will deliver no more
data, until "other" work has been done (like reading other outputs, or
feeding input).
The decoders never return DATA_STARVE, because they don't get input from
the player core (instead, they get it from the demuxer directly, which
is why they still can return DATA_WAIT).
Also document the DATA_* semantics in the enum.
Fixes#4746.
Just the audio resync code in its normal state: buggy. This time,
AD_NO_PROGRESS was handled about the same as AD_WAIT. But it means the
decoder didn't output data, even though input is still readily
available.
This happened in particular when the timeline code was used (potentially
skipping many packets), and thus should fix#4688.
Fixes#4626. Previously removed because the original smi entry was added
by someone who did not agree to LGPL relicensing. I'm not sure if the
original change was copyrightable, but this commit for sure does not
fall under that author's copyright.
Can be enabled via --vd-lavc-dr=yes. See manpage additions for what it
does.
This reminds of the MPlayer -dr flag, but the implementation is
completely different. It's the same basic concept: letting the decoder
render into a GPU buffer to avoid a copy. Unlike MPlayer, this doesn't
try to go through filters (libavfilter doesn't support this anyway).
Unless a filter can work in-place, DR will be silently disabled. MPlayer
had very complex semantics about buffer types and management (which
apparently nobody ever understood) and weird restrictions that mostly
limited it to mpeg2 style codecs. The mpv code does not do any of this,
and just lets the decoder allocate an arbitrary number of untyped
images. (No MPlayer code was used.)
Parts of the code based on work by atomnuker (starting point for the
generic code) and haasn (some GL definitions, some basic PBO code, and
correct fencing).
It used to use the "encoding" section. Change this to the default
section to remove another small special case. encoding-profiles.conf
didn't use this by default anyway. The previous revert could mitigate
potential impacts of this a little.
This reverts commit 0dcb51c7fa.
I randomly decided that this was better. It can be re-applied once it
actually becomes necessary in some way.
Note that this worked fine. My main gripe with this is that it can
spam the log file with encoding stuff even if playback mode is used.
This is more of a niche usecase than --ytdl-format and --ytdl-raw-options,
so a simple script option should be enough.
Either create lua-settings/ytdl_hook.conf with
'exclude=example.com,sub.example.com' option or
"--script-opts=ytdl_hook-exclude=example.com,sub.example.com"
Remove the various redundant m_config_set_option* calls, rename the
remaining one to m_config_set_option_cli(), and merge the
m_config_parse_option() function.
This replaces `vo-performance` by `vo-passes`, bringing with it a number
of changes and improvements:
1. mpv users can now introspect the vo_opengl passes, which is something
that has been requested multiple times.
2. performance data is now measured per-pass, which helps both
development and debugging.
3. since adding more passes is cheap, we can now report information for
more passes (e.g. the blit pass, and the osd pass). Note: we also
switch to nanosecond scale, to be able to measure these passes
better.
4. `--user-shaders` authors can now describe their own passes, helping
users both identify which user shaders are active at any given time
as well as helping shader authors identify performance issues.
5. the timing data per pass is now exported as a full list of samples,
so projects like Argon-/mpv-stats can immediately read out all of the
samples and render a graph without having to manually poll this
option constantly.
Due to gl_timer's design being complicated (directly reading performance
data would block, so we delay the actual read-back until the next _start
command), it's vital not to conflate different passes that might be
doing different things from one frame to another. To accomplish this,
the actual timers are stored as part of the gl_shader_cache's sc_entry,
which makes them unique for that exact shader.
Starting and stopping the time measurement is easy to unify with the
gl_sc architecture, because the existing API already relies on a
"generate, render, reset" flow, so we can just put timer_start and
timer_stop in sc_generate and sc_reset, respectively.
The ugliest thing about this code is that due to the need to keep pass
information relatively stable in between frames, we need to distinguish
between "new" and "redrawn" frames, which bloats the code somewhat and
also feels hacky and vo_opengl-specific. (But then again, this entire
thing is vo_opengl-specific)
This takes car eof unsubtle bugs if something at init does not work
(specifically if mp_new_client() returns NULL). It also removes the need
for that PMP MF hack.
In a bunch of cases, we emulate highly platform specific APIs on a
higher level across all OSes, such as IPC, terminal, subprocess
handling, and more. We have source files for each OS, and they implement
all the same mpv internal API.
Selecting which source file to use on an OS can be tricky, because there
is partially overlapping and emulated APIs (consider Cygwin on Windows).
Add a pick_first_matching_dep() function to make this slightly easier
and more structured.
Also add dummy backends in some cases, to deal with APIs not being
available.
Clarify the Windows dependency identifiers, as these are the most
confusing.
This affects options like --vf or --display-tags. These used a "*"
suffix to match all options starting with a specific name, and handled
the rest in the option parser. Change this to remove the "*" special
case, and require every option parser to declare a list of allowed
suffixes via m_option_type.actions.
The new way is conceptually simpler, because we don't have to account
for the "*" in a bunch of places anymore, and instead everything is
centrally handled in the CLI part of the option parser, where it's
actually needed.
It automatically enables suffixes like -add for a bunch of other
stringlist options.
This makes things like --show-profile=enc-v-h264 just work again.
Currently I don't see a reason why we should not always load the
encoding profiles. Although I guess this used to be different in the
past. (It probably won't take long until I revert this again - seems
like a fight you can't win for some reason.)
Fixes#4551.
These files have all in common that they were fully or mostly taken from
mplayer.c. (mplayer.c was a huge file that contains almost all of the
playback core, until it was split into multiple parts.) This was
probably the hardest part to relicense, because so much code was moved
around all the time.
player/audio.c still does not compile. We'll have to redo audio
filtering. Once that is done, we can probably actually provide an
actual LGPL configure switch.
Here is a relatively detailed list of potential issues:
8d190244: author did not reply, parts were made GPL-only in a previous
commit.
7882ea9b: author could not be reached, but the code is gone. wscript
still has --datadir switch, but I don't think this is relevant to
copyright.
f197efd5: unclear origin, but I consider the code gone anyway (replaced
with generic OSD mechanisms).
8337d9c2: author did not reply, but only the option still exists (under
a different name), other code was removed.
d8fd7131: did not reply. Disabled in a previous commit.
05258251: same author as above. Both fields actually seem to have
vanished (even when tracking renames), so no action taken.
d459e644, 268b2c1a: author did not reply, but we reuse only the options
(with different names and slightly or fully different semantics, and
completely different implementations), so I don't think this is relevant
for copyright.
09e742fe, 17c39c4e: same as above.
e8a173de, bff4b3ee: author could not be reached. The commands were
reworked to properties, and the code outside of the TV code were moved
back to the TV code. So I don't think copyright applies to the current
command.c parts (mp_property_tv_color, mp_property_tv_freq,
mp_property_tv_scan). The TV parts remain GPL.
0810e427: could not be reached. Disabled in a previous commit.
43744a2d: unknown author, but this was replaced by dynamic alloc (if the
change is even copyrightable).
116ca0c7: unknown author; reasoning see input.c relicensing commit.
e7e4d1d8: these semantics still exist, but as generic code, and this
code was fully removed.
f1175cd9: the author of the cited patch is unknown, and upon inspection
it turns out that I was only using the idea to pause the player on EOF,
so I claim it's not copyright relevant.
25affdcc: author could not be reached (yet) - but it's only a function
rename, not copyrightable.
5728504c was committed by Arpi (who agreed), but hints that it might be
by a different author. In fact it seems to be mostly this patch:
http://lists.mplayerhq.hu/pipermail/mplayer-dev-eng/2001-November/002041.html
The author did not respond, but it all seems to have been removed later.
It's a terrible mess though. Arpi reverted the A-V sync code at first,
but left the RTC code for a while. The following commits remove these
changes 100%: 14b35442, 7181a091, 31482783, 614f8475, df58e822.
cehoyos did explicitly not agree to LGPL, but was involved in the
following changes:
c99d8fc8: applied a patch and didn't modify it, the original author
agreed.
40ac0d31: author could not be reached, but all code is gone anyway. The
"af" command has a similar function, but works completely different and
actually reuses a mechanism older than this patch.
54350436: applied a patch, but didn't modify it, except for adding a
German translation, which was removed later.
a2dda036: same situation as above
240b743e: this was made GPL-only in a previous commit
7b25afd7: same as above (for now)
kirijua could not be reached, but was a regular patch contributor:
c2c997fd: video equalizer code move; probably not copyrightable. Is GPL
due to Nick anyway.
be54f481: technically, this became the audio track property later. But
all what is left is the fact that you pass a track ID to it, so consider
the original coypright non-relevant.
2f376d1b: this was rewritten in b7052b43, but for now we can afford to
be careful, so this was marked as GPL only in a previous commit.
43844d09: remaining parts in main.c were reverted in a previous commit.
anders has mostly disagreed with the LGPL relicensing. Does not want
libaf to become LGPL, but made some concessions. In particular, he
granted us permission to relicense 4943e9c52c and 242aa6ebd4. We also
consider some of his changes remaining in mpv not relevant for copyright
(such as 735de602 - we won't remove the this option completely). We will
completely remove his other contributions, including the entire audio
filter chain. For now, this stuff is marked as GPL only. The remaining
question is how much code in player/audio.c (based on the former
mplayer.c and dec_audio.c) is under his copyright. I made claims about
this in a previous commit.
Nick(ols) Kurshev, svn username "nick" and "nickols_k", could not be
reached. He had a lot of changes in early MPlayer. It seems all of that
was removed, at least in mpv. His main work, like VIDIX or libswscale
work, does not exist in mpv anymore, but the changes to mplayer.c and
other core parts still deserve attention:
a4119f6b, fb927549, ad3529b8, e11b23dc, 5f2178be, 93c371d5: removed in
b43d67e0, d1628d12, 24ed01fe, df58e822.
0a83c6ec, 104c125e, 4e067f62, aec5dcc8, b587a3d6, f3de6e6b: DR, VAA, and
"tune" stuff was fully removed later on or replaced with other
mechanisms.
340183b0: screenshots were redone later (the VOCTRL was even removed,
with an independent implementation using the same VOCTRL a few years
later), so not relevant anymore. Basically only the 's' shortcut remains
(but not its implementation).
92c5c274, bffd4007, 555c6766: for now marked as GPL only in a previous
commit.
Might contain some trace amounts of "michael"'s copyright, who agreed to
LGPL only once the core is relicensed. This will still be respected, but
I don't think it matters at this in this case. (Some code touched by him
was merged into mplayer.c, and then disappeared after heavy
refactoring.)
I tried to be as careful and as complete as possible. It can't be
excluded that amends to this will be made later.
This does not make the player LGPL yet.
"anders" has not agreed to relicense most of his changes (although he
gave permission for 4943e9c52c and 242aa6ebd4).
Note that commit 3053a8b7f is in part also affected. The commit message
hides this, but it seems some code was based on anders':
http://mplayerhq.hu/pipermail/mplayer-dev-eng/2002-October/011773.html
Much of the final commit was by Arpi, but it's still grating that there
was no proper attribution (and in a case that turned out to be so
important).
This means player/audio.c won't even compile (and other parts of the
player also use audio/audio.h, which is still GPL). But whether the end
result compiles doesn't matter for copyright.
Due to the heavy refactoring applied over the year, the boundaries are
rather fuzzy and also somewhat arbitrary, though.
Most of this code will have to be replaced with a new filter chain
later.
I think the idea is that you can pass multiple help options on the
command line, and it will print them all, instead of printing only the
first one and exiting. This was added in commit 43844d09, but the patch
author could not be reached. Revert it, as it's not a critical feature.
This was added in 0810e4275. The patch author did not reply (yet). Not
sure if copyrightable, but I'm making the still existing C part GPL-only
for now (in a previous commit).
Commit d8fd7131 changes this. "tibcu" did not reply. While I'm not sure
whether copyrightable code remains, I'd tend towards saying yes (the
basic idea is still intact after years of refactoring), so make it
GPL-only for now.
Nick and kiriuja could not be reached, and created/changed this in
92c5c274, 6441a5ad, bffd4007, 555c6766, c2c997fd. The video equalizer
stuff was redone fully later, but there are still parts that look too
similar and basically use the same approach. I'm more comfortable with
declaring it GPL only for now.
I plan to redo them later in a way that will remove copyright.
cehoyos has not agreed to the LGPL relicensing. He added the deinterlace
property in commit 7b25afd7. Make it GPL-only for now. The still working
parts of the --deinterlace option are not affected by his copyright.
It was extended by "seru" in 8d190244. This person could not be reached
(or does not reply), and it's in the way of LGPL relicensing. Deprecate
it, and mark the (probably) affected parts of the code with HAVE_GPL. To
be fair, even though the osd.c parts were refactored from the original
code, there's probably no copyright by seru on it. But for now play it
save. The mere existence of a 3rd OSD level is certainly not
copyrightable, so you still can set osd-level to 3 - just that it does
nothing.
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
While we could easily ifdef-out this file for a LGPL core, it's still
annoying, and also the only GPL file remaining in player/ that is not
based on mplayer.c.
This file originates from subreader.c. It's not clear whether the
original author of it gave us permission to relicense to LGPL (he
probably did, but without further clarification it's sort of ambiguous),
but the subtitle file search code was written by other authors anyway
(see 7eef93819f).
One contribution (574eb892ea) is a bit of a corner case, as
test_ext_list() now does a bstrcasecmp(). But I don't think the
copyright remains here. (I asked the author anyway, just in case. But
I didn't wait for the answer.)
In some other cases, contributors who could not be reached added some
subtitle extensions. I don't think those are copyrightable on their own,
but I dropped them anyway just to be sure.
This is more uniform, and potentially gets rid of some past copyrights.
It might be that this subtly changes caching behavior (it seems before
this, it synced to the demuxer if the length was unknown, which is not
what we want.)
cehoyos adds the step_property command in 7a71da01d, and it could be
argued that copyright of this still applies to the later add/cycle
commands (a668ae0ff9). While I'm not sure if this is really the case,
stay conservative for now and mark these commands as GPL-only. Mark the
command.c code too, although that is not being relicensed yet.
I'm leaving the MP_CMD_* enum items, as they are obviously different.
In commit 116ca0c768, "veal" (essentially an anonymous author) adds an
"osd_show_property_text" command (well, the commit message says "based
on" that person's code, so it's not clear how much is from him or from
albeu, who agreed to LGPL). This was later merged again with the
"osd_show_text" command, and then all original code was removed in
commit 58cc0f637f, so I claim that no copyright applies anymore. (Though
technically the input.conf addition still might be copyrighted, so I'm
just dropping it to get rid of the thought.)
"kiriuja" added 2f376d1b39 (sub_load etc.) and be54f4813 (switch_audio).
The latter is gone. I would argue that the former is fully rewritten
with commits b7052b431c and 0f155921b0. But like in the step_property
case, I will be overly conservative for now, and mark them as GPL-only,
as this is potentially shaky and should be thought through first. (Not
bothering with the command define/enum in the header, as it will be
unused in LGPL mode anyway.)
keycodes.c/h can be GPL, except for commit 2b1f95dcc2, which is a
patch by someone who wasn't asked yet. Before doing something radical, I
will wait for a reply.
Choosing the seek direction for MPSEEK_FACTOR based on the location of
seek_pts is nonsense, and can cause the seek position to oscillate
between adjacent keyframes, such as when dragging the OSC bar on short
videos.
Fix this by always seeking backward for type MPSEEK_FACTOR, i.e. seek
to the keyframe for the group of pictures (GOP) in which seek_pts is
located.
Fixes#4183.
Signed-off-by: wm4 <wm4@nowhere>
This introduces (yet another..) mp_colorspace members, an enum `light`
(for lack of a better name) which basically tells us whether we're
dealing with scene-referred or display-referred light, but also a bit
more metadata (in which way is the scene-referred light expected to be
mapped to the display?).
The addition of this parameter accomplishes two goals:
1. Allows us to actually support HLG more-or-less correctly[1]
2. Allows people playing back direct “camera” content (e.g. v-log or
s-log2) to treat it as scene-referred instead of display-referred
[1] Even better would be to use the display-referred OOTF instead of the
idealized OOTF, but this would require either native HLG support in
LittleCMS (unlikely) or more communication between lcms.c and
video_shaders.c than I'm remotely comfortable with
That being said, in principle we could switch our usage of the BT.1886
EOTF to the BT.709 OETF instead and treat BT.709 content as being
scene-referred under application of the 709+1886 OOTF; which moves that
particular conversion from the 3dlut to the shader code; but also allows
a) users like UliZappe to turn it off and b) supporting the full HLG
OOTF in the same framework. But I think I prefer things as they are
right now.
List of changes:
1. Kill nom_peak, since it's a pointless non-field that stores nothing
of value and is _always_ derived from ref_white anyway.
2. Kill ref_white/--target-brightness, because the only case it really
existed for (PQ) actually doesn't need to be this general: According
to ITU-R BT.2100, PQ *always* assumes a reference monitor with a
white point of 100 cd/m².
3. Improve documentation and comments surrounding this stuff.
4. Clean up some of the code in general. Move stuff where it belongs.
The option->property bridge can't (and shouldn't) preserve option flags.
This is a problem if the flags are actually used by the option
implementation, beyond calling m_config_mark_co_flags().
This was true so far, but b8193e4071 changed this. Now setting the
--profile option (usually from a config file or as recursive profile)
can have side-effects that depend on the flags contents. Solve this by
avoiding going through the "double bridge" altogether.
This fixes a regression if an auto-profile is active, and the user
specifies an option on the command line that is supposed to override an
item in a profile recursively referenced by the auto-profile. The
command line option will not override it, because the auto-profile is
set later, and during application of the auto-profile, the
M_SETOPT_PRESERVE_CMDLINE flag gets lost.
Having to add something to m_property is not nice, and I'll probbaly
regret later. On the other hand, there is a chance that this helps
towards true option/property unification.
Before this, options with co->data==NULL (i.e. no storage) were not
added to the bridge (except alias options). There are a few options
which might make sense to allow via the bridge ("profile" and
"include"). So allow them.
In command_init(), we merely remove the co->data check, the rest of the
diff is due to switching the if/else branches for convenience.
We also must explicitly error on M_PROPERTY_GET if co->data==NULL. All
other cases check it in some way.
Explicitly exclude options from the property bridge, which would be
added due this, and the result would be pointless.
Implements JS with almost identical API to the Lua support.
Key differences from Lua:
- The global mp, mp.msg and mp.utils are always available.
- Instead of returning x, error, return x and expose mp.last_error().
- Timers are JS standard set/clear Timeout/Interval.
- Supports CommonJS modules/require.
- Added at mp.utils: getenv, read_file, write_file and few more.
- Global print and dump (expand objects) functions.
- mp.options currently not supported.
See DOCS/man/javascript.rst for more details.
Add "or URLs" to the default OSD message when mpv is launched without parameters.
Since this works flawlessly with youtube-dl integration, the fact that you can drop URLs directly to the window should be advertised more.
If --log-file was used in config files, this could be missing due to the
exact timing when the messages are print, and when the options are
applied. Fix this by always dumping the version again when a log file is
opened.
This adds check_property_scalable, which returns true if the property is
backed by a floating-point number. When the add or cycle commands
operate on these properties, they can benefit from the fractional scale
value in cmd->scale. When the property is not backed by a floating-point
number, cmd->scale_units is used instead, so for axis events, the
property is only incrmented when the user scrolls one full unit.
This solution isn't perfect, because in some cases integer-backed
properties could benefit from accurate scrolling. For example, if an
axis is bound to "cycle audio 5", the cycle command could be made to
change the audio track by one when the user scrolls 1/5th of a unit,
though this behaviour would require more changes to the options system.
Most contributors have agreed. vo.c requires a "driver" entry for each
video output - we assume that if someone who didn't agree to LGPL added
a line, it's fine for vo.c to be LGPL anyway. If the affected video
output is not disabled at compilation time, the resulting binary will be
GPL anyway.
One problem are the changes by Nick Kurshev (usually using "nick" as SVN
username). He could not be reached. I believe all changes to his files
are actually gone, but here is a detailed listing:
fa1d5742bc: nick introduces a new VO API. It was removed in 64bedd9683.
Some of this was replaced by VOCTRLs are introduced in 7c51652a1b,
obviously replacing at least some functionality by his API.
b587a3d642: nick adds a vo_tune_info_t struct. Removed in 64bedd9683
too.
9caad2c29a: nick adds some VOCTRLs, which were silently removed in
8cc5ba5ab8 (they became unused probably with the VIDIX removal).
340183b0e9: nick adds VO-based screenshots, which got removed in
2f4b840f62. Strangely the same name was introduced in 01cf896a2f again,
but this is a coincidence and worked differently (also it was removed
yet again in 2858232220).
104c125e6d: nick adds an option for "direct rendering". It was renamed
in 6403904ae9 and fully removed in e48b21dd87.
5ddd8e92a1: nick adds code to check the VO driver preinit arg to every
single VO driver. The argument itself and any possibly remaining code
associated with it was removed in 1f5ffe7d30.
f6878753fb: nick adds header inclusion guards. We assume this is not
relevant for copyright.
Some of nick's code was merely moved to other files, such as the
equalizer stuff added in 555c676683 and moved in 4db72f6a80 and
12579136ff, and don't affect copyright of these files anymore.
Other notes:
fef7b17c34: a patch by someone who wasn't asked for relicensing added a
symbol that was removed again in 1b09f4633.
4a8a46fafd: author probably didn't agree to LGPL, but the function
signature was changed later on anyway, and nothing of this is left.
7b25afd742: the same author adds a symbol to what is vo.h today, which
this relicensing commit removes, as it was unused. (It's not clear
whether the mere symbol is copyrightable, but no need to take a risk.)
3a406e94d7, 9dd8f241ac: slave mode things by someone who couldn't be
reached. This aspect of the old slave mode was completely removed.
bbeb54d80a: patch by someone who was not asked, but the added code was
completely removed again.
The author of the old code disagreed with LGPL. The new code is a clean
room reimplementation by Niklas Haas. It lacks the clamping, but we
decided it doesn't matter.
Untested, bugs can be fixed later anyway.
The new replaygain code accidentally applied the linear gain as cubic
volume level. Fix this by moving the computation of the volume scale out
of the af_volume filter.
(Still haven't verified whether the replaygain code works correctly.)
af_volume is deprecated, and so are its replaygain sub-options. To make
it possible to use replaygain without deprecated options (and of course
to make it available at all after af_volume is dropped), reintroduce
them as top-level options.
This also means that they are easily changeable at runtime by using them
as properties. Change the "volume" property to use the new update
mechanism as well.
We don't actually bother sharing the implementation between new and
deprecated mechanisms, as the deprecated one will simply be deleted.
For the from_dB() functions, we mention anders' copyright, although I'm
not sure if a mere formula is copyrightable. This will have to be
determined later.
This whole change is mostly untested. Our distributed human CI will take
care of it.
Close the audio device if there is no audio track (or stream) in the
current file. It will be opened again if the next file should contain
audio.
Signed-off-by: Marko Hauptvogel <marko.hauptvogel@googlemail.com>
Signed-off-by: wm4 <wm4@nowhere>
It's been missing since mplayer2 times, not sure why. It originates from
subreader.c. No analysis on whether it can be relicensed to LGPL was
done yet.
The license text refers a "above copyright notice", so I guess it'd be
good to actually provide such a notice.
Add the license to some files that were missing it (since in theory, our
Copyright file says that such files are LGPL by default).
Remove the questionable remarks about the license in the client API.
The previous commit set "mpctx->playback_active = false;" before unload
hooks were processed. This was intentional, but could in theory cause
playback_active to be set to true again, and actually it's plain wrong
if playback was exited in the middle it. There needs to be something
else that forces playback_active to be set to false while in this
unloading state.
Make mpv_observe_property() work correctly on them even with
--keep-open-pause=no.
This also changes the situations in which the screensaver is
enabled/disabled subtly.
Merge the pause_player() and unpause_player() functions. Make sure the
pause events are emitted properly. We can now set the internal pause
state based on a predicate, instead of e.g. handle_pause_on_low_cache()
making a mess to trigger the internal pause state as wanted.
Preparation for some more changes.
Instead of pausing if --keep-open is active, stop
at end but continue playing if seeking backwards.
And then stop again when end is reached.
Signed-off-by: wm4 <wm4@nowhere>
Over the PR, the option was renamed, and the manpage additions were
slightly changed/enhanced.
Un-special-case the sub-speed property, and apply subtitle speed updates
in more cases. In particular, this respects runtime changes of the
sub-fps option.
(A minor consequence of this is that the subtitle speed is recomputed
more often even in cases when it's not necessary. Also, the subtitle
update is slightly "delayed" rather than strictly instant. Both of
these likely are absolutely not observable by the user, although the
subtitle speed verbose log message will be printed more often if the
subtitle format is MicroDVD.)
The plan is to nuke the custom filter chain completely. It's not clear
what will happen to the still needed builtin filters (mostly hardware
deinterlacing and vf_vapoursynth). Most likely we'll replace them with
different filter chain concept (whose main purpose will be providing
builtin things and bridging to libavfilter).
The undocumented "warn" options are there to disable deprecation
warnings when the player inserts filter automatically.
The same will be done to audio filters, at a later point.
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes#4250.
This wasn't enabled if no stream cache was used. It can work with only
the demuxer cache.
In theory this could be always enabled (even for local files), but still
try to avoid this, and enable it only if the source is marked as
potentially being a "network" stream. The intention is mostly to enable
it for the youtube-dl pseudo-DASH support.
The 'sub' and 'audio' configuration subdirectories are supposed to
be fallbacks for sub-paths and audio-file-paths respectively, but
they weren't being scanned even if they existed.
This is a bit approximate, because we rely on the pixel format changing
if the hardware decoding changes. This is not always true, as the pixel
format for software decoded video and hardware decoded video copied back
to CPU RAM could be the same. (Not sure if that is actually the case for
any supported cases.)
But for now this should fix most of #4289.
Basically, see the example in input.rst.
This is better than the "old" vf-toggle method, because it doesn't
require the user to duplicate the filter string in mpv.conf and
input.conf.
Some aspects of this changes are untested, so enjoy your alpha testing.
Will still hide playlist items with long enough filenames and osd-font-size
but not as soon.
osc messages should now preserve their scaling with fullscreen toggling and
cycling through audio-only files and files with video.
Closes#4081, #4083, #4102
Requested. The property semantics are a bit muddy due to lack of effort.
Anticipated use is different display of cache status, so it should not
matter anyway.
This is just a pointless refactor with the only goal of making
image_writer_opts.format a number.
The pointless part of it is that instead of using some sort of arbitrary
ID (in place of a file extension string), we use a AV_CODEC_ID_. There
was also some idea of falling back to the libavcodec MJPEG encoder if
mpv was not linked against libjpeg, but this fails. libavcodec insist on
having AV_PIX_FMT_YUVJ420P, which we pretend does not exist, and which
we always map to AV_PIX_FMT_YUV420P (without the J indicating full
range), so encoder init fails. This is pretty dumb, but whatever. The
not-caring factor is raised by the fact that we don't know that we
should convert to full range, because encoders have no proper way to
signal this. (Be reminded that AV_PIX_FMT_YUVJ420P is deprecated.)
This also will set image=NULL, if the video frame is marked as hwaccel,
and could not be copied to normal RAM. This will probably change the
error message (due to screenshot_get() returning NULL, instead of making
image conversion fail at a later point), but the behavior is the same
anyway.
Fixes theoretical lock-order issues found by Coverity. Calling these
inside the log is unnecessary anyway, because they have their own
locking, and because mpv_detach_destroy() needs to be called by someone
who has exclusive access to the mpv_handle (it's basically a destructor
function). The lock order issues comes from the fact that they call back
into the client API implementation to broadcast events and such.
This was added for A-B loops, but it looks like commit a1dec6f5 made
this code unnecessary. Remove it, because it has the annoying
side-effect of blocking playback stop when seeking past the end.
When pausing, we sent BOCTRL_PAUSE and VOCTRL_RESTORE_SCREENSAVER. These
essentially wait until the video frame has been rendered. This is a
problem with the opengl-cb, if GL rendering is done in the same thread
as libmpv uses. Unfortunately, it's allowed to use opengl-cb this way.
Logically speaking, it's a deadlock situation, which is resolved with a
timeout. This can lead to quite ugly effects, like the on-pause frame
not being rendered until the timeout has passed. It has been interpreted
as video continuing to play.
Resolve this by simply not blocking on pause. Make the screensaver
controls async, and handle sending VOCTRL_PAUSE in the VO thread.
(All this could be avoided by redoing the internal VO API.)
Also see #4152.
Currently, tracks have always associated streams, so there can't be a
NULL dereference on the next line. But all the code is written with the
possibility in mind that we might want tracks without streams, so make
it consistent.
Found by coverity.
Not so important by itself, but important for when we replace the vf
libavfilter wrapper with the common implementation. (Which will
hopefully happen, but not too soon.)
Preparation for enabling hw filters. mp_image_params can't have an
AVHWFramesContext reference (because it can't hold any allocations, and
isn't meant to hold "active" data in the first place.
So just use a mp_image. It has all real data removed, because that would
essentially leak 1 frame once the decoder or renderer don't need it
anymore.
The AVFrame in the tmp_frame field was never actually deallocated.
Since this AVFrame holds data temporarily only, and is unreferenced
immediately after use, there is actually no need to make it per-pad, so
simplify it a bit.
(There's also no real value in caching this tmp_frame at all, but I
guess it makes the control flow slightly simpler.)
Using these was a temporary solution while some compilers implemented
the underlying atomic mechanisms, but not the C11 language parts (or
that's what I guess). Not really useful for us anymore. Also, there is
the slight risk of having subtly incorrect semantics by using
potentially changing compiler internals and such.
Seen with a VOD of a recently ended livestream on Youtube.
They seem to use segmented DASH but unlike normal Youtube
segmented DASH, the segments don't seem to need the initialization
segment.
The video actually fails to start to play if the init segment is
prepended with a lot of 'Found duplicated MOOV Atom. Skipped it' errors
popping up.
If we have a disconnected output, read data only passively (and don't
cause input to be written). Otherwise, we're in danger of making
libavfilter queue too many frames on other outputs which are connected
to the same input, but don't read as quickly.
Also don't set pad->output_needed in this specific case, because it
would nonsensically make lavfi_process() return true, even if nothing is
going on.
This commit breaks if there is a simple filter chain with a connected
input, but a disconnected output, like
--lavfi-complex='[aid1] copy [ao]'
and the audio output didn't initialize correctly. This will eventually
starve video as the audio packet queue get full (it will print a
warning, and then assume video EOF and exit).
But whatever.
Probably fixes#4118.
We use the metadata provided by youtube-dl to sort-of implement
fragmented DASH streaming.
This is all a bit hacky, but hopefully a makeshift solution until
libavformat has proper mechanisms. (Although in danger of being one
of those temporary hacks that become permanent.)
If used with fuzzy matching, the player tends to pick up random text
files, sometimes with interesting results.
The most interesting interaction is when the user uses
--log-file=something.txt, and mpv tries to open its own log file. It
essentially "freezes" during probing, because every time it reads from
it, it will write some more data, which in turn will cause more data to
be read - until the 2MB max. probing size is slowly reached. This is not
even an obscure corner case, but happened to multiple users.
The .txt extension has been considered a subtitle extension ever since
the code was added to MPlayer's subreader.c, but I'm not seeing many
actual subtitle files with this extension, so just get rid of it.
Instead of enabling it only when a stream-cache is enabled, also try to
enable it independently from that if the demuxer is marked as
is_network.
Also add some code to the EDL code, so EDLs containing network streams
are automatically cached this way.
Extend the OSD info line so that it shows the demuxer cache in this case
(more or less).
I didn't find where or whether options.rst describes how the demuxer
cache is enabled, so no changes there.
several unicode characters can be encoded in two different ways, either
in a precomposed (NFC) or decomposed (NFD) representation. everywhere
besides on macOS, specifically HFS+, precomposed strings are being used.
furthermore on macOS we can get either precomposed or decomposed
strings, for example when not HFS+ formatted volumes are used. that can
be the case for network mounted devices (SMB, NFS) or optical/removable
devices (UDF). this can lead to an inequality of actual equal strings,
which can happen when comparing strings from different sources, like the
command line or filesystem. this makes it mainly a problem on macOS
systems.
one case that can potential break is the sub-auto option. to prevent
that we convert the search string as well as the string we search in to
the same normalised representation, specifically we use the decomposed
form which is used anywhere else.
this could potentially be a problem on other platforms too, though the
potential of occurring is very minor. for those platforms we don't
convert anything and just fallback to the input.
Fixes#4016
Requested. Supposedly "scenarist closed captions".
(The list of getting quite full. But it's probably still better than
trying to probe the files by contents, because the external subtitle
loader code will initially look at _all_ files in the same directory as
the main file.)
Useful for distinguishing bit depth when hardware decoding. (To the
degree it's useful to show it at all. This just brings the hardware
decoding case on the same level of showing information as the software
decode call.)
A hacky, convoluted, half-working mess that attempts to cut off overlong
playlists.
It does so by relying on the ASS formatting rule that the font size is
specified in the virtual PlayResY resolution. This means we can
(normally) easily tell how many lines fit on the screen. On the other
hand, this does not work if the text is wrapped.
This as a kludge until a Better™ solution is available.
I'm still getting some crashes after issue #3210 was fixed in commit
5beb230690. It's hard to reproduce those
crashes, they happen maybe once a month, so I guess it could be a race
condition. But in any case, I don't see anything wrong in applying some
defensive programming here.
For reference, here is what was happening on 0.23.0-1 from Debian
testing:
Playing: ytdl://usL5CeP_row
(+) Video --vid=1 (*) (h264)
(+) Audio --aid=1 --alang=und (*) (aac)
[osc]
[osc] stack traceback:
[osc] @osc.lua:2074: in function 'process_event'
[osc] @osc.lua:2246: in function 'cb'
[osc] mp.defaults:107: in function 'fn'
[osc] mp.defaults:60: in function 'handler'
[osc] mp.defaults:339: in function 'handler'
[osc] mp.defaults:448: in function 'call_event_handlers'
[osc] mp.defaults:485: in function 'dispatch_events'
[osc] mp.defaults:441: in function <mp.defaults:440>
[osc] [C]: in ?
[osc] [C]: in ?
[osc] Lua error: @osc.lua:2074: attempt to index field 'eventresponder' (a nil value)
Note that the location is different from where issue #3210 happens.
Signed-off-by: Roland Hieber <rohieb@rohieb.name>
"show-text test; script-binding display_stats" can potentially crash. It
sends a message event. None of the string arguments can be NULL, which
fails if cmd->key_name is NULL. This in turn can be due to commands
combined with ";" (basically the key association doesn't consider nested
commands).
Seems like quite on oversight.
For most of the better pthread implementations, pthread_mutex_init() on
an already 0-initialized memory block is probably a no-op, but of course
we should do things correctly. Also could setup analysis tools.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
"drop-frame-count" -> "decoder-frame-drop-count"
"vo-drop-frame-count" -> "frame-drop-count"
This gets rid of the backwards "drop-frame" part in the name.
Maybe calling the new property "frame-drops" would be better, but there
are already a bunch of similar properties that end in "-count".
Disabling cache readahead by default until at least 1 track is selected
is mainly for external files and such, where you don't want them to use
up resources until they're actually used.
It doesn't make sense to disable the cache for the demuxer opened for
prefetch. Also, it's fine to let it do that for the main file too (doing
or not doing it is of little consequence). That saves us from having to
distinguish them.
Since for mpv CLI, the player state is a singleton, full prefetching is
a bit tricky. We do it only on the demuxer layer.
The implementation reuses the old "open thread". This means there is
significant potential for regressions even if the new option is not
used. This is made worse by the fact that I barely tested this code.
The generic mpctx_run_reentrant() wrapper is also removed - this was its
only user, and its remains become part of the new implementation.
As preparation for file prefetching, we basically have to get rid of
using mpctx->playback_abort for the main demuxer (i.e. the thing that
can be prefetched). It can't be changed on a running demuxer, and always
using the same cancel handle would either mean aborting playback would
also abort prefetching, or that playback can't be aborted anymore.
Make this more flexible with some refactoring.
Thi is a quite shitty solution if you ask me, but YOLO.
Requires a bunch of hacks:
- we access AVFilterLink.hw_frames_ctx. This is not a public API in
FFmpeg and Libav. Newer FFmpeg provides an accessor
(av_buffersink_get_hw_frames_ctx), but it's not available in Libav or
the current FFmpeg release or Libav. We need this value after filter
graph creation, so We have no choice but to access this.
One alternative is making filter creation and format negotiation
fully lazy (i.e. delay it and do it as filters are output), but this
would be a huge change.
So for now, we knowingly violate FFmpeg's and Libav's ABI and API
constraints because they don't provide anything better.
On newer FFmpeg, we use the (quite ugly) accessor, though.
- mp_image_params doesn't (and can't) have a field for the frames
context AVBufferRef. So we pass it via vf_set_proto_frame(), and even
more hacks.
- if a filter needs a hw context, but we haven't created one yet
(because normally we create them lazily), it will fail at init.
- we allow any hw format now, although this could go horrible wrong.
Why all this effort? We could move hw deinterlacing filters etc. to
FFmpeg, which is a very worthy goal.
Can break things quite badly.
Example: reloading a plugin linked against GTK 3.x can cause a segfault
if you call dlclose() on it. According to GTK developers, unloading the
GTK library is unsupported.
Give scripting backends a proper name, instead of calling everything
"scripts".
Log client exit directly in client.c, as that is more general (doesn't
change actual output).
This basically reuses the scripting infrastructure.
Note that this needs to be explicitly enabled at compilation. For one,
enabling export for certain symbols from an executable seems to be quite
toolchain-specific. It might not work outside of Linux and cause random
problems within Linux.
If C plugins actually become commonly used and this approach is starting
to turn out as a problem, we can build mpv CLI as a wrapper for libmpv,
which would remove the requirement that plugins pick up host symbols.
I'm being lazy, so implementation/documentation are parked in existing
files, even if that stuff doesn't necessarily belong there. Sue me, or
better send patches.
We have to perform some silly acrobatics to make the playback_thread()
exit, as the mpv_command() will error out with MPV_ERROR_UNINITIALIZED.
Test case: mpv_terminate_destroy(mpv_create())
Reported by a user on IRC.
mp_image_hw_download() is a libavutil wrapper added in the previous
commit. We drop our own code completely, as everything is provided by
libavutil and our helper wrapper.
This breaks the screenshot code, so that has to be adjusted as well.
Cover art handling is a disgusting hack that causes a mess in all
components. And this will stay this way. This is the Xth time I've
changed cover art handling, and that will probably also continue.
But change the code such that cover art is injected into the demux
packet stream, instead of having an explicit special case it in the
decoder glue code. (This is somewhat more similar to the cover art hack
in libavformat.)
To avoid that the over art picture is decoded again on each seek, we
need some additional "caching" in player/video.c. Decoding it after each
seek would work as well, but since cover art pictures can be pretty
huge, it's probably ok to invest some lines of code into caching it.
One weird thing is that the cover art packet will remain queued after
seeks, but that is probably not an issue.
In exchange, we can drop the dec_video.c code, which is pretty
convenient for one of the following commits. This code duplicates a
bunch of lower-level decode calls and does icky messing with this weird
state stuff, so I'm glad it goes away.
The property calls will always succeed anyway. On the other hand, the
error handling is kind of incomplete (doesn't check setting ab-loop-a
when ab-loop-b is also set), so drop this code.
Since there's no property yet that uses this type, and the code is used
for property change detection only. this is dead code. Add it anyway for
completeness.
Obvious mistake: we entered EOF drain mode if the decoder returned
AD_WAIT, which is very wrong. AD_WAIT means we should retry after
waiting for a while (or to be precise, until the demuxer/decoder
have more data). We should just pass down this status, and not
change the audio chain state.
This was exposed by a libavfilter EOF handling bug. Feeding a filter
chain with af_dynaudnorm, and sending an EOF before a frame is returned
makes it stuck and keeps returning EAGAIN, instead of returning the
buffered audio. In combination with the bug at hand, which entered
EOG drain mode, it could happen that it got stuck due to libavfilter
discarding buffered data each time the demuxer ran out of data.
Fixes#3997.
Was intended to show a "nice" message on edition switching. In practice,
the message was never visible. The OSD code checks whether a demuxer is
loaded, and if not, discards the message - meaning if the OSD code
happened to run before the demuxer was fully loaded, no message was
shown. This is apparently a regression due to extensions to the OSD and
the situations in which it can be used.
Remove the broken code since it's too annoying to fix. Instead, a
default property message will be shown, which is a bit uglier, but
actually not too unuseful.
Helps with gif, probably does unwanted things with other formats.
This doesn't handle --end quite correctly, but this could be added
later.
Fixes#3924.
Length property is deprecated and no longer works. This fixes
a bug when the total file duration wasn't visible if the
option to display milliseconds was activated.
Having empty space before the title in layout=*bar looks worse
than the floating buttons in layout=box.
Also disable both playlist buttons selectively according to the
current position.
The way playback/loading is stopped on the demuxer layer makes it report
an error to the higher levels of the player. But if playback/loading was
explicitly aborted, printing such an error is confusing and misleading.
This was probably just an oversight anyway. Fix it by using the libmpv
API reported error field instead, which handles this better.
Remove more stuff that was needed only for legacy suboptions.
One user-visible change is that parent-options like --tv are now not
visible anymore. They lead to a special error message when used before,
but now they're simply not part of the option list anymore.
For some reason, some types of accesses didn't warn, for example when
using mp.observe_property() in Lua. This was because the deprecation
handling code explicitly checks certain accesses. I'm not quite certain
why it was done this way. Just make it warn always.
This could be backported to the current release, if we cared.
As threatened by the API changes document.
We can actually keep the deprecated --playlist-pos and --cache options,
since they are aliases and not used by the corresponding properties.
They are inconsistent, but do no harm. Keep them for now for the sake of
the command line user.
mpv_identify.sh partially stopped working, because it was never updated.
The shell magic can't deal with property names that contain "/", so we
can't replace "samplerate" with "audio-params/samplerate" - just remove
these properties. (How about you use ffprobe?)
As threatened by the API changes document.
This commit also removes or stubs equivalent calls in IPC and Lua
scripting.
The stubs are left to maintain ABI compatibility. The semantics of the
API functions have been close enough to doing nothing that this probably
won't even break existing API users. Probably.
Run "playlist-remove current" while the last playlist entry is being
played stopped playback. Fix this and return to the first entry instead.
Fixes#3808.
If video reaches EOF, subtitle timing will be switched to timing without
video frames. This means it calls osd_set_force_video_pts() and
overrides the PTS of whatever video frame is current (since the video
frame's PTS has nothing to do with the current playback position
anymore).
This was not reset when seeking back into video. Subtitles wouldn't show
up, or if there was a subtitle displayed, it would get stuck with it. In
particular, this could happen even if EOF was only temporary (such as
with --keep-open).
Fix this by clearing the override PTS whenever a video frame is shown.
Fixes#3770.
Coverart mode has the same issue as no-video mode, except that the video
chain is fully active. It shows only 1 frame at the start, which would
normally mean that only the subtitle at timestamp 0 is shown. Use the
no-video subtitle rendering mode in this case instead.
(This still doesn't handle subtitle display when playing cover-art
without audio, or playing a single image. This is because there's
nothing that will advance playback_pts.)
This code would just keep it busy while e.g. being paused. Even if it's
not paused, it couldn't help with anything since we obviously still lock
display to the externally updated PTS.
This way people can still use the mouse to quickly check the elapsed time
without moving it all the way to the bottom while still having half the screen
to ignore mouse movement.
If a VO is created, but no video is playing (i.e. --force-window is
used), then until now no subtitles were shown. This is because VO
subtitle display normally depends on video frame timing. If there are no
video frames, there can be no subtitles.
Change this and add some code to handle this situation specifically. Set
a subtitle PTS manually and request VO redrawing manually, which gets
the subtitles rendered somehow.
This is kind of shaky. The subtitles are essentially sampled at
arbitrary times (such as when new audio data is decoded and pushed to
the AO, or on user interaction). To make a it slightly more consistent,
force a completely arbitrary minimum FPS of 10.
Other solutions (such as creating fake video) would be more intrusive or
would require VO-level API changes.
Fixes#3684.
* Fixes: when on the end of playlist only half of entries are displayed.
* Simplifies the logic of limited_list so it's easy to follow.
* limited_list's pos parameter is now 1 based which seem more natural.
* Few changes to comply with code style thorough the file.
* Small format change:
"Playlist: (%d/%d):" -> "Playlist [%d/%d]:"
"Chapters: (%d/%d):" -> "Chapters [%d/%d]:"
These can be used in input.conf for pretty formatting of lists as
with shift+clicking the OSC buttons.
Ex:
z script-message osc-playlist
Z script-message osc-chapterlist
x script-message osc-tracklist
--reset-on-next-file=all triggers m_config_backup_all_opts(), which
backups all options (even deprecated ones). Later, when the option
values are reset with m_config_restore_backups(), mp_on_set_option() is
called, which in turn calls mp_property_do_silent(), which in turn will
call mp_property_generic_option() and m_config_get_co(), which triggers
the deprecation message.
Unfortunately there's no good way to determine whether an option has
actually changed (there's no option value compare operation), so the
deprecated options have to be set no matter what. On the other hand, we
can't pass through additional flags through the property layer. So we
add a dumb global flag to silence the deprecation warnings in these
cases.
Fortunately m_config_get_co_raw() works to silence the warnings.
m_config_get_co() also resolves aliases (deprecated and non-deprecated),
but aliased options are handled differently by the option-property
bridge, so we don't need to do that here, so the only purpose of it is
to trigger a warning for deprecated (non-alias) options.
The tv-freq options and properties use different types, thus must be
treated as incompatible. Fixes an assertion with reset-on-next-file=all,
which tries to set the option.
Fixes#3708.
Don't leave the buffering state while the demuxer is still marked as
having underflowed. It's unclear why this hasn't been done before - with
the logic being complicated as it is, maybe there was a reason for this.
This is actually still not very reliable, but should be better than what
was before: on stream switching decoders can read packets all while the
demuxer is executing a refresh seek, which creates the underrun
situation - but nothing really totally guarantees that the underrun
state remains stable when the demuxer is back at the current demuxer
position. Anyway, it's an improvement.
The rest of the touched condition is not changed, just moved around for
cosmetic reasons.
in very rare circumstances, doing a relative seek like +1s will end up
doing an absolute seek to 00:01. this guards against that possibility.
so far i've only ever seen this issue when using --ad=lavc:ac3_at and
doing several relative seeks in quick succession. this is likely either
a bug in the audiotoolbox decoder in ffmpeg, or simply due to inherent
latency in that hardware decoder which causes brief periods of time
where the current audio pts is unknown.
i've seen several mpegts samples where pts jumps backwards and repeats
itself. this usually happens on live tv streams from cable providers,
particularly when the stream switches from one advertisement to another.
when there is a huge delay between audio/video sync, it can take a
really long time to converge back. this speeds up the resync time by
increasing the max_change allowed per iteration.
Signed-off-by: wm4 <wm4@nowhere>
