Remove the awkward planarization. It had to be done because the AC3
encoder requires planar formats, but now we support them natively.
Try to simplify buffer management with mp_audio_buffer.
Improve checking for buffer overflows and out of bound writes. In
theory, these shouldn't happen due to AC3 fixed frame sizes, but being
paranoid is better.
The format negotiation is the same, except don't confusingly copy the
input format into af->data, just to overwrite it later. af->data should
alwass contain the output format, and the existing code was just a very
misguided use of the af_test_output() helper function.
Just set af->data to the output format immediately, and modify the input
format properly.
Also, if format negotiation fails (and needs another iteration), don't
initialize the libavcodec encoder.
Before this commit, the af_instance->mul/delay values were in bytes.
Using bytes is confusing for non-interleaved audio, so switch mul to
samples, and delay to seconds. For delay, seconds are more intuitive
than bytes or samples, because it's used for the latency calculation.
We also might want to replace the delay mechanism with real PTS
tracking inside the filter chain some time in the future, and PTS
will also require time-adjustments to be done in seconds.
For most filters, we just remove the redundant mul=1 initialization.
(Setting this used to be required, but not anymore.)
Since ao_openal simulates multi-channel audio by placing a bunch of
mono-sources in 3D space, non-interleaved audio is a perfect match for
it. We just have to remove the interleaving code.
ALSA supports non-interleaved audio natively using a separate API
function for writing audio. (Though you have to tell it about this on
initialization.) ALSA doesn't have separate sample formats for this,
so just pretend to negotiate the interleaved format, and assume that
all non-interleaved formats have an interleaved companion format.
Replace the code that used a single buffer with mp_audio_buffer. This
also enables non-interleaved output operation, although it's still
disabled, and no AO supports it yet.
Implementation wise, this could be much improved, such as using a
ringbuffer that doesn't require copying data all the time. This is
why we don't use mp_audio directly instead of mp_audio_buffer.
This comes with two internal AO API changes:
1. ao_driver.play now can take non-interleaved audio. For this purpose,
the data pointer is changed to void **data, where data[0] corresponds to
the pointer in the old API. Also, the len argument as well as the return
value are now in samples, not bytes. "Sample" in this context means the
unit of the smallest possible audio frame, i.e. sample_size * channels.
2. ao_driver.get_space now returns samples instead of bytes. (Similar to
the play function.)
Change all AOs to use the new API.
The AO API as exposed to the rest of the player still uses the old API.
It's emulated in ao.c. This is purely to split the commits changing all
AOs and the commits adding actual support for outputting N-I audio.
Allocate af_instance->data in generic code before filter initialization.
Every filter needs af->data (since it contains the output
configuration), so there's no reason why every filter should allocate
and free it.
Remove RESIZE_LOCAL_BUFFER(), and replace it with mp_audio_realloc_min().
Interestingly, most code becomes simpler, because the new function takes
the size in samples, and not in bytes. There are larger change in
af_scaletempo.c and af_lavcac3enc.c, because these had copied and
modified versions of the RESIZE_LOCAL_BUFFER macro/function.
No AO can handle these, so it would be a problem if they get added
later, and non-interleaved formats get accepted erroneously. Let them
gracefully fall back to other formats.
Most AOs actually would fall back, but to an unrelated formats. This is
covered by this commit too, and if possible they should pick the
interleaved variant if a non-interleaved format is requested.
Based on earlier work by Stefano Pigozzi.
There are 2 changes:
1. Instead of mp_audio.audio, mp_audio.planes[0] must be used.
2. mp_audio.len used to contain the size of the audio in bytes. Now
mp_audio.samples must be used. (Where 1 sample is the smallest unit
of audio that covers all channels.)
Also, some filters need changes to reject non-interleaved formats
properly.
Nothing uses the non-interleaved features yet, but this is needed so
that things don't just break when doing so.
My main problem with this is that the output format will be incorrect.
(This doesn't matter right, because there are no samples output.)
This assumes all audio filters can deal with len==0 passed in for
filtering (though I wouldn't see why not).
A filter can still signal an error by returning NULL.
af_lavrresample has to be fixed, since resampling 0 samples makes
libavresample fail and return a negative error code. (Even though it's
not documented to return an error code!)
Apparently we were using FFmpeg-specific APIs. I have no idea whether
this code is correct on both FFmpeg and Libav (no examples, bad
doxygen... why do they even complaint aht people are using their APIs
incorrectly?), but it appears to work on FFmpeg. That was also the case
before commit ebc4ccb though, where it used internal libavformat
symbols.
Untested on Libav, Travis will tell us.
Set the PulseAudio stream title, just like the VO window title is set.
Refactor update_vo_window_title() so that we can use it for AOs too.
The ao_pulse.c bit is stolen from MPlayer.
In theory, af_volume could use separate volume levels for each channel.
But this was never used anywhere.
MPlayer implemented something similar before (svn r36498), but kept the
old path for some reason.
This member was redundant. sh_audio->sample_format indicates the sample
size already.
The TV code is a bit strange: the redundant sample size was part of the
internal TV interface. Assume it's really redundant and not something
else. The PCM decoder ignores the sample size anyway.
Also do some cosmetic changes, like merging definition and
initialization of local variables.
Remove an annoying debug mp_msg() from af_open(). It just printed the
command line parameters; if this is really needed, it could be added
to af.c instead (similar as to what vf.c does).
Helps with readability. Also remove the ctx_opt_set_* helper macros and
use av_opt_set_* directly (I think these macros were used because the
lines ended up too long, but this commit removes two indentation levels,
giving more space).
This should allow to make format negotiation much simpler, since it
takes the responsibility to compare actual input and accepted input
formats from the filters. It's also backwards compatible. Filters which
have expensive initialization still can use the old method.
I have no idea what these do, but apparently they are needed to inform
ALSA about spdif configuration. First, replace the literal constant "6"
for the AES0 parameter with the symbolic constants from the ALSA
headers (the final value is the same). Second, copy paste some funky
looking parameter setup from VLC's alsa output for setting the AES1,
AES2, AES3 parameters. (The code is actually not literally copy-pasted,
but does exactly the same.)
My small but non-zero hope is that this could make DTS-HD work, or at
least work into that direction. I can't test spdif stuff though, and
for DTS-HD not even opening the ALSA device succeeds on my system.
Using spdif with alsa requires adding magic parameters to the device
name, and the existing code tried to deal with the situation when the
user wanted to add parameters too.
Rewrite this code, in particular remove the duplicated parameter string
as preparation for the next commit. The new code is a bit stricter, e.g.
it doesn't skip spaces before and after '{' and '}'. (Just don't add
spaces.)
This accessed tons of private libavformat symbols all over the place.
Don't do this and convert all code to proper public APIs. As a
consequence, the code becomes shorter and cleaner (many things the code
tried are done by libavformat APIs).
It's probably better if all auto-inserted filters are removed when doing
an af_add operation. If they're really needed, they will be
automatically re-added.
Fix the error message. It used to be for an actual internal error, but
now it happens when format negotiation fails, e.g. when trying to use
spdif and real audio filters.
ao_lavc.c accesses ao->buffer, which I consider internal. The access was
done in ao_lavc.c/uninit(), which tried to get the left-over audio in
order to write the last (possibly partial) audio frame. The play()
function didn't accept partial frames, because the AOPLAY_FINAL_CHUNK
flag was not correctly set, and handling it otherwise would require an
internal FIFO.
Fix this by making sure that with gapless audio (used with encoding),
the AOPLAY_FINAL_CHUNK is set only once, instead when each file ends.
Basically, move the hack in ao_lavc's uninit to uninit_player.
One thing can not be entirely correctly handled: if gapless audio is
active, we don't know really whether the AO is closed because the file
ended playing (i.e. we want to send the buffered remainder of the audio
to the AO), or whether the user is quitting the player. (The stop_play
flag is overwritten, fixing that is perhaps not worth it.) Handle this
by adding additional code to drain the AO and the buffers when playback
is quit (see play_current_file() change).
Test case: mpv avdevice://lavfi:sine=441 avdevice://lavfi:sine=441 -length 0.2267 -gapless-audio
It spams these in verbose mode. It's caused by format negotiation code
in af.c. It's for the mpv format to ffmpeg-format case, and that one is
very uninteresting. (The ffmpeg supported audio formats are practically
never extended.)
Turn the sample format definitions into an enum. (The format bits are
still macros.) The native endian versions of the new definitions don't
have a NE suffix anymore, although there are still compatibility defines
since too much code uses the NE variants.
Rename the format bits for special formats to help to distinguish them
from the actual definitions, e.g. AF_FORMAT_AC3 to AF_FORMAT_S_AC3.
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
There are some Microsoft Windows symbols which are traditionally used by
the mplayer core, because it used to be convenient (avi was the big
format, using binary windows decoders made sense...). So these symbols
have the exact same definition as the Windows one, and if mplayer is
compiled on Windows, the symbols from windows.h are used.
This broke recently just because some files were shuffled around, and
the symbols defined in ms_hdr.h collided with windows.h ones. Since we
don't have windows binary decoders anymore, there's not the slightest
reason our symbols should have the same names. Rename them to reduce the
risk for collision, and to fix the recent regression.
Drop WAVEFORMATEXTENSIBLE, because it's mostly unused. ao_dsound defines
its own version if the windows headers don't define it, and ao_wasapi is
not available on systems where this symbol is missing.
Also reindent ms_hdr.h.
