Set the flag CODEC_FLAG_OUTPUT_CORRUPT by default. Note that there is
also CODEC_FLAG2_SHOW_ALL, which is older, but this seems to be ffmpeg
only.
Note that whether you want this enabled depends on the user. Some might
prefer that only good frames are output, while others want the decoder
to try as hard as possible to output _anything_. Since mplayer/mpv is
rather the kind of player that tries hard instead of being "clever", set
the new default to override libavcodec's default.
A nice way to test this is switching video tracks. Since mpv doesn't
wait for the next key frame, it'll start feeding the decoder with a
packet from the middle of the stream.
This is relatively hacky, but it's Christmas, so it's ok. This does two
things: 1. allow selecting two subtitle tracks, and 2. include a hack
that renders the second subtitle always as toptitle. See manpage
additions how to use this.
Basically, reimplement --msglevel. Instead of making the new msg code
use the legacy code, make the legacy code use the reimplemented
functionality.
The handling of the deprecated --identify switch changes. It temporarily
stops working; this will be fixed in later commits.
The actual sub-options syntax (like --msglevel-vo=...) goes away, but I
bet nobody knew about this or used this anyway.
Remove these because I'm too lazy to convert them to proper
STREAM_CTRLs. Considering that probably nobody uses radio://, caring
about this is a complete waste of time. I will add these commands back
if someone asks for them, but I don't expect this to happen.
"-" could skip optional arguments. I think this was a pretty bad idea,
because it introduced a weird special case.
I'll remove the special syntax, but keep compatibility for the "seek"
and "screenshot" commands.
Add the mp_get_user_path() function, and make it expand special path
prefixes. Use it for some things in mpv which take filenames
(--input-config, --screenshot-template, opengl icc-profile suboption).
This allows accessing files in the mpv config dir without hardcoding the
config path by prefixing the path with ~~/. Details see manpage
additions.
Use the scaled video size (i.e. as shown on the window) as reference for
zoom. This is the easiest way to fix different width/height scale
factors as they happen when zooming video with a pixel aspect ratio
other than 1:1.
Also fix the unscaled mode, so that it 1. doesn't scale even with
--video-zoom, and 2. doesn't scale by small amounts when the video is
cropped by making the window smaller than the video.
The --flip option flipped the image upside-down, by trying to use VO
support, or if not available, by inserting a video filter. I'm not sure
why it existed. Maybe it was important in ancient times when VfW based
decoders output an image this way (but even then, flipping an image is a
free operation by negating the stride).
One nice thing about this is that it provided a possible path for
implementing video orientation, which is a feature we should probably
support eventually. The important part is that it would be for free for
VOs that support it, and would work even with hardware decoding.
But for now get rid of it. It's useless, trivial, stands in the way, and
supporting video orientation would require solving other problems first.
In particular, this disables mpeg4. There are some files out there that
use GMC, a usually rarely used and ineffective feature, which is not
supported by most hardware decoders. In these cases the hw decoder
outputs garbage, while software decoding works perfectly fine. We can't
really fallback to software decoding in these cases, because we don't
know that something is wrong in the first place. I can't see any
advantages of hw decoding of mpeg4, so it's better to disable it.
Apparently this stopped working after some planar changes (broken format
negotiation). Radically change option parsing in an incompatible way.
Suggest alternatives to this filter, since it barely has any importance
anymore.
Don't bother explaining the sample format naming schema. The "ne" bit is
outdated anyway, and anyone who has to use this option will be able to
understand the naming schema just by looking at the names too.
vf_stereo3d now uses vf_lavfi, if mpv was compiled with libavfilter.
vf_swapuv is hereby undeprecated. It's too trivial to wrap it with
libavfilter, and it's also too useless that even typing this commit
message is not really worth the time to spend on it.
Just in case someone expects these are unchanged just because they're
not mentioned in changes.rst anywhere. Documenting all of these changes
would be too much work and not helpful either.
Mostly backwards compatible, we don't change much because we just want
to get rid of the legacy option string handling.
You can't pass an aspect as first argument anymore.
Apparently you can get this with: stereo3d=ab[2]{l,r}:sbs[2]{l,r}
So it seems the filter is redundant and can be removed.
Also see FFmpeg commit 2f11aa141a01.
Unfortunately, this forces filtering both luma and chroma, because
otherwise we'd have to deal with libavfilter's vf_noise weird handling
of YUV vs. RGB formats. Would we e.g. filter luma only, it would filter
red in RGB mode only, because it goes by component and there's no way to
distinguish YUV and RGB by just using the filter's options.
Also remove the ability to disable deinterlacing at runtime. You can
still disable deinterlacing at runtime by using the ``D`` key and its
automatical filter insertion/removal.
This will allow old filter to run libavfilter instead by calling
vf_lw_set_graph(), which turns the filter into a wrapper, using a given
libavfilter graph.
Later commits use that to automatically "reroute" a bunch of filters to
libavfilter. We want to get rid of the old MPlayer filter code, because
it's bad an unmaintained, but we still don't want to force everyone to
use vf_lavfi, so this solution will do for a while.
mpv was hardcoded to always consider the right Alt key as Alt Gr, but there
are parituclar combinations of platforms and keyboard layouts where it's more
convenient to treat the right Alt as a keyboard modifier just like the left
one.
Fixes#388
This allows vo_opengl to use GL_TEXTURE_RECTANGLE textures, either by
enabling it with the 'rectangle-textures' sub-option, or by having a
hwdec backend force it. By default it's off.
The _only_ reason we're adding this is because VDA can export rectangle
textures only.
There are some use cases for this. For example, you can use it to set
defaults of automatically inserted filters (like af_lavrresample). It's
also useful if you have a non-trivial VO configuration, and want to use
--vo to quickly change between the drivers without repeating the whole
configuration in the --vo argument.
See the changes in input.rst for explanations.
Technically speaking, this also gets rid of some undefined behavior:
passing NULL as a vararg (execl()) is always a bug.
This partially reverts commit 7d152965. It turns out that at least some
ALSA drivers (at least snd-hda-intel) report incorrect audio delay with
non-native sample rates, even if the sample rate is only very slightly
different from the native one.
For example, 48000Hz is fine on my hda-intel system, while both 8000Hz
and 47999Hz lead to a delay off by 40ms (according to mpv's A/V
difference display), which suggests that something in ALSA is
calculating the delay using the wrong sample rate.
As an additional problem, with ALSA resampling enabled, using
48001Hz/float/2ch fails, while 49000Hz/float/2ch or 48001Hz/s16/2ch
work. With resampling disabled, all these cases work obviously, because
our own resampler doesn't just refuse any of these formats.
Since some people want to use the ALSA resampler (because it's highly
configurable, supports multiple backends, etc.), we still allow enabling
ALSA resampling with an ao_alsa suboption.
It appears PTS sorting was useful only for avi files (and VfW-muxed
mkv). Maybe it was historically also important for decoders with broken
or non-existent PTS reordering (win32 codecs?). But now that we handle
demuxers which outputs DTS only correctly, it just seems dead weight.
Disable it by default. The --pts-association-mode option is now forced
to always use the decoder's PTS value. You can still enable the old
default (auto) or force sorting. But we will probably remove this option
entirely at some point.
Make demux_mkv export timestamps at DTS when it's in VfW mode. This is
needed to get correct timestamps with the new default mode. demux_lavf
already does that.
This was needed to determine PTS from DTS, but the previous commits
make it unnecessary.
The builtin genpts hack was used for DVD, because libavformat's genpts
essentially went amok on DVD timestamp resets. See commit 65d87091 for
details.
This drops the --pp option, which was probably broken for a while. The
option automatically inserted the "pp" filter. The value passed to it
was ignored (which is probably broken, it always selected maximal
quality).
Inserting this filter can be done simply with --vf=pp, so this is not
needed anymore.
Simulate proper handling of AOPLAY_FINAL_CHUNK. Print when underruns
occur (i.e. running out of data). Add some options that control
simulated buffer and outburst sizes.
All this is useful for debugging and self-documentation. (Note that
ao_null always was supposed to simulate an ideal AO, which is the reason
why it fools people who try to use it for benchmarking video.)
This changes option parsing as well as filter defaults slightly. The
default is now to encode to spdif (this is way more useful than writing
raw AC3 - what was this even useful for, other than writing broken ac3
-in-wav files?). The bitrate parameter is now always in kbps.
We found that the stretching - although it usually improves the looks of
the fonts - is incorrect.
On DVD, subtitles can cover the full area of the picture, and they have
the same pixel aspect as the movie itself.
Too bad many commercially released DVDs use bitmap fonts made with the
wrong pixel aspect (i.e. assuming 1:1) - --stretch-dvd-subs will make
these more pretty then.
This removes "--hwdec=crystalhd".
I doubt anyone even tried to use this. But even if someone wants to
use it, the decoders can still be explicitly invoked with e.g.:
--vd=lavc:h264_crystalhd
The only advantage our special code provided was fallback to
software decoding. (But I'm not sure how the ffmpeg crystalhd
pseudo-decoder actually behaves.)
Removing this will allow some simplifications as soon as we don't need
vdpau_old.c anymore.
This uses vdpau OpenGL interop to convert a vdpau surface to a texture.
Note that this is a bit weak and primitive. Deinterlacing (or any other
form of vdpau postprocessing) is not supported. vo_opengl chroma scaling
and chroma sample position are not supported. Internally, the vdpau
video surfaces are converted to a RGBA surface first, because using the
video surfaces directly is too complicated. (These surfaces are always
split into separate fields, and the vo_opengl core expects progressive
frames or frames with weaved fields.)
VA-API's OpenGL/GLX interop is pretty bad and perhaps slow (renders a
X11 pixmap into a FBO, and has to go over X11, probably involves one or
more copies), and this code serves more as an example, rather than for
serious use. On the other hand, this might be work much better than
vo_vaapi, even if slightly slower.
Most hardware decoding APIs provide some OpenGL interop. This allows
using vo_opengl, without having to read the video data back from GPU.
This requires adding a backend for each hardware decoding API. (Each
backend is an entry in gl_hwdec_vaglx[].) The backends expose video data
as a set of OpenGL textures.
Add infrastructure to support this. The next commit will add support for
VA-API.
We had some code for checking profiles earlier, which was removed in
commits 2508f38 and adfb71b. These commits mentioned that (working) hw
decoding was sometimes prevented due to profile checking, but I can't
find the samples anymore that showed this behavior. Also, I changed my
opinion, and I think checking the profiles is something that should be
done for better fallback to software decoding behavior.
The checks roughly follow VLC's vdpau profile checks, although we do
not check codec levels. (VLC's profile checks aren't necessarily
completely correct, but they're a welcome help anyway.)
Add a --vd-lavc-check-hw-profile option, which skips the profile check.
Roughly follows MPlayer svn commits 36492 and 36493. We also remove
the volume peak reporting. (There are much better libavfilter filters
for this, I think.)
af_format is the old audio conversion filter. It could do all possible
conversions supported by the audio chain. However, ever since the
addition of af_lavrresample, most conversions are done by
libav/swresample, and af_format is used as fallback.
Separate out the fallback cases and remove af_format. af_convert24 does
24 bit <-> 32 bit conversions, while af_convertsignendian does sign and
endian conversions. Maybe the way the conversions are split sounds a bit
odd. But the former changes the size of the audio data, while the latter
is fully in-place, so there's at least different buffer management.
This requires a quite complicated algorithm to make sure all these
"partial" conversion filters can actually get from one format to
another. E.g. s24le->s32be always requires convertsignendian and
convert24, but af.c has no idea what the intermediate format should
be. So I added a graph search (trying every possible format and
filter) to determine required format and filter. When I wrote this,
it seemed this was still better than messing everything into
af_lavrresample, but maybe this is overkill and I'll change my
opinion. For now, it seems nice to get rid of af_format though.
The AC3->IEC61937 conversion isn't supported anymore, but I don't think
this is needed anywhere. Most AOs test all formats explicitly, or use
the AF_FORMAT_IS_IEC61937() macro (which includes AC3).
One positive consequence of this change is that conversions always
include dithering (done by libav/swresample), instead of possibly going
through af_format, which doesn't do anything fancy.
Rename af_force to af_format. It's essentially compatible with command
line uses of af_format. We retain a compatibility alias for af_force.
Now that talloc has been removed, the license can be switched back to
GPLv2+. Actually, there never was a GPLv2+ licensed MPlayer (fork or
not) until now, but removal of some GPLv2-only code makes this possible
now. Rewrite the Copyright file to explain the reasons for the licenses
MPlayer and forks use. The old Copyright file didn't contain anything
interesting anymore, and all information it contained is available at
other places in the source tree.
The reason for the license change itself is that it should improve
interoperability with differently licensed code in general.
This essentially reverts commit 1752808.
The argument or this change is that --loop should set how often the
file is played, not the number of additional repeats.
Based on pull request 277, with additions to the manpage and removal
of "--loop=0".
Signed-off-by: wm4 <wm4@nowhere>
This commit adds the --force-window option, which will cause mpv always
to create a window when started. This can be useful when pretending that
mpv is a GUI application (which it isn't, but users pretend anyway), and
playing audio files would run mpv in the background without giving a
window to control it.
This doesn't actually create the window immediately: it only does so
only after initializing playback and when it is clear that there won't
be any actual video. This could be a problem when starting slow or
completely stuck network streams (mpv would remain frozen in the
background), or if video initialization somehow is stuck forever in
an in-between state (like when the decoder doesn't output a video
frame, but doesn't return an error either). Well, we can pretend only
so much that mpv is a GUI application.
This is preliminary. There are still tons of issues, and any aspect
of scripting may change in the future. I decided to merge this
(preliminary) work now because it makes it easier to develop it, not
because it's done. lua.rst is clear enough about it (plus some
sarcasm).
This requires linking to Lua. Lua has no official pkg-config file, but
there are distribution specific .pc files, all with different names.
Adding a non-pkg-config based configure test was considered, but we'd
rather not.
One major complication is that libquvi links against Lua too, and if
the Lua version is different from mpv's, you will get a crash as soon
as libquvi uses Lua. (libquvi by design always runs when a file is
opened.) I would consider this the problem of distros and whoever
builds mpv, but to make things easier for users, we add a terrible
runtime test to the configure script, which probes whether libquvi
will crash. This is disabled when cross-compiling, but in that case
we hope the user knows what he is doing.
This code is actually quite inefficient: it reuses the (slow, simple)
screenshot code. It uses an inefficient method to read the image
(vaGetImage() instead of vaDeriveImage()), allocates new memory for
each frame that is read, and it tries all image formats again each
time.
Also, in my tests it always picked NV12 as image format, which is not
ideal if you actually want to filter the video, and vo_xv can't handle
this format without conversion either.
However, a user confirmed that it worked for him, so everything is fine.
Merged from pull request #246 by xylosper. Minor cosmetic changes, some
adjustments (compatibility with older libva versions), and manpage
additions by wm4.
Signed-off-by: wm4 <wm4@nowhere>
By default, libavformat uses UDP for rtsp playback. This doesn't work
very well. Apparently the reason is that the buffer sizes libavformat
chooses for UDP are way too small, and switching to TCP gets rid of this
issue entirely (thanks go to Reimar Döffinger for figuring this out).
In theory, you can set buffer sizes as libavformat options, but that
doesn't seem to help.
Add an option to select the rtsp transport, and make TCP the default.
Also remove an outdated comment from stream.c.
Allows for example: --status-msg='${?pause==yes:(Paused) } ...' to
emulate the normal terminal status line. It's useful in other situations
too.
I'm a bit worried about extending this mini-DSL, and sure hope nobody
will implement a generic formula evaluator at some point in the future.
But for now we're probably safe.
Note that this is intentionally never done if the AO or softvolume is
different, or if the current volume control method is thought to control
system wide volume (such as ALSA) or otherwise user controllable (such
as PulseAudio). The intention is to keep things robust and to avoid
messing with the user's audio settings as far as possible, while still
providing the ability to resume volume if it makes sense.
Commit broke text subtitles without embedded fonts. Will look for a better
solution later. Revert it for now, since I'm starting to get bug reports.
This reverts commit 4a9f618d9f.
Improves display of images and video with alpha channel, especially if
the transparent regions contain (supposed to be invisible) garbage
color values.
This is to avoid the 30s hang while mpv caches fonts. In practice all the
fonts an average user is going to use are embedded in mkv files so there is
no reason to build fontconfig's cache on all of OS X system directories.
I might add something similar for terminal usage, but I am highly undecided.
These would have to be updated manually all the time. Replacing them
automatically would be possible, but additional work, and would force
regeneration of the manpage way too often.
We decided that we don't need these fields.
Instead of containing a format string within %w{...}, simply allow %w
to specify one item of a time format string. This is simpler, more like
other format specifiers (%t), and probably easier to use too.
This is commonly used to disable the screensaver with broken/non-
standard X screensavers. During pause, the screensaver should not be
disabled, so not calling this command while paused seems sensible.
See github issue #236.
The --deinterlace option does on playback start what the "deinterlace"
property normally does at runtime. You could do this before by using the
--vf option or by messing with the vo_vdpau default options, but this
new option is supposed to be a "foolproof" way.
The main motivation for adding this is so that the deinterlace property
can be restored when using the video resume functionality
(quit_watch_later command).
Implementation-wise, this is a bit messy. The video chain is rebuilt in
mpcodecs_reconfig_vo(), where we don't have access to MPContext, so the
usual mechanism for enabling deinterlacing can't be used. Further,
mpcodecs_reconfig_vo() is called by the video decoder, which doesn't
have access to MPContext either. Moving this call to mplayer.c isn't
currently possible either (see below). So we just do this before frames
are filtered, which potentially means setting the deinterlacing every
frame. Fortunately, setting deinterlacing is stable and idempotent, so
this is hopefully not a problem. We also add a counter that is
incremented on each reconfig to reduce the amount of additional work per
frame to nearly zero.
The reason we can't move mpcodecs_reconfig_vo() to mplayer.c is because
of hardware decoding: we need to check whether the video chain works
before we decide that we can use hardware decoding. Changing it so that
this can be decided in advance without building a filter chain sounds
like a good idea and should be done, but we aren't there yet.
Retrieve per-chapter metadata, but don't do much with it. We just make
the metadata of the _current_ chapter available as chapter-metadata
property. Returning the full chapter list with metadata would be no
problem, except that the property interface isn't really good with
structured data, so it's not available for now.
Not sure if it's worth it, but it was requested via github issue #201.
This option makes the cursor always visible in windowed mode.
Apparently, this is what (some?) Windows and OSX users expect. It's
disabled by default for now.
Restructure the cursor hide logic a bit for this purpose.
The --volume option accepted values up to 10000, but internally, the
value is always clipped to 0-100 range. What makes this even worse is
that --softvol-max suggests that it extends the range of --volume, which
is not the case. (And passing a volume larger than 100 to --volume
didn't even print a warning.)
When enabling --save-position-on-quit, playback position stored not only
on quit, but in any case playback of a file was stopped. This includes
going to the next file with playlist navigation commands.
After some discussion on IRC, it turned out that nobody thought this was
good behavior. Disable it, and really make it save only on quit.
Maybe the option is useless now, as the user could remap the CLOSE_WIN
key binding. On the other hand, CLOSE_WIN sounds and _is_ a bit obscure.
Modeled after the old playlist_parser.c, but actually new code, and it
works a bit differently.
Demuxers (and sometimes streams) are the component that should be used
to open files and to determine the file format. This was already done
for subtitles, but playlists still use a separate code path.
A wayland output based on shared memory. This video output is useful for x11
free systems, because the current libGL in mesa provides GLX symbols. It is also
useful for embedded systems where the wayland backend for EGL is not
implemented like the raspberry pi.
At the moment only rgb formats are supported, because there is still no
compositor which supports planar formats like yuv420p. The most used compositor
at the moment, weston, supports only BGR0, BGRA and BGR16 (565).
The BGR16 format is the fastest to convert and render without any noticeable
differences to the BGR32 formats. For this reason the current (very basic)
auto-detection code will prefer the BGR16 format. Also the weston source code
indicates that the preferred format is BGR16 (RGB565).
There are 2 options:
* default-format (yes|no) Which uses the BGR32 format
* alpha (yes|no) For outputting images and videos with transparencies
Decoding H264 using Video Decode Acceleration used the custom 'vda_h264_dec'
decoder in FFmpeg.
The Good: This new implementation has some advantages over the previous one:
- It works with Libav: vda_h264_dec never got into Libav since they prefer
client applications to use the hwaccel API.
- It is way more efficient: in my tests this implementation yields a
reduction of CPU usage of roughly ~50% compared to using `vda_h264_dec` and
~65-75% compared to h264 software decoding. This is mainly because
`vo_corevideo` was adapted to perform direct rendering of the
`CVPixelBufferRefs` created by the Video Decode Acceleration API Framework.
The Bad:
- `vo_corevideo` is required to use VDA decoding acceleration.
- only works with versions of ffmpeg/libav new enough (needs reference
refcounting). That is FFmpeg 2.0+ and Libav's git master currently.
The Ugly: VDA was hardcoded to use UYVY (2vuy) for the uploaded video texture.
One one end this makes the code simple since Apple's OpenGL implementation
actually supports this out of the box. It would be nice to support other
output image formats and choose the best format depending on the input, or at
least making it configurable. My tests indicate that CPU usage actually
increases with a 420p IMGFMT output which is not what I would have expected.
NOTE: There is a small memory leak with old versions of FFmpeg and with Libav
since the CVPixelBufferRef is not automatically released when the AVFrame is
deallocated. This can cause leaks inside libavcodec for decoded frames that
are discarded before mpv wraps them inside a refcounted mp_image (this only
happens on seeks).
For frames that enter mpv's refcounting facilities, this is not a problem
since we rewrap the CVPixelBufferRef in our mp_image that properly forwards
CVPixelBufferRetain/CvPixelBufferRelease calls to the underying
CVPixelBufferRef.
So, for FFmpeg use something more recent than `b3d63995` for Libav the patch
was posted to the dev ML in July and in review since, apparently, the proposed
fix is rather hacky.
Originally, the objective of this commit was changing --edition to be
1-based, but this was cancelled. I'm still leaving the change to
demux_mkv.c though, which is now only of cosmetic nature.
Add --video-align-x/y, --video-pan-x/y, --video-scale options and
properties. See the additions to the manpage for description and
semantics.
These transformations are intentionally done on top of panscan. Unlike
the (now removed) --panscanrange option, this doesn't affect the default
panscan behavior. (Although panscan itself becomes kind of useless if
the new options are used.)
This option allowed you to extend the range of the panscan controls, so
that you could essentially use it to scale the video. This will be
replaced by a separate option to set the zoom factor directly.
Apparently this was dropped some years ago, but judging from MPlayer's
handling of this, the original code wasn't so great anyway. The new
code handling clearing of panscan borders correctly, and integrates
better with the YUV path. (Although the VDPAU API sure makes this
annoying with its separate surface types for RGB.)
Note that we create 5 surfaces for some reason - I don't think this
makes too much sense (because we can't use the deinterlacer with RGB
surfaces), but at least it reduces the amount of differences with
the YUV code path.
Clearing the borders is done by drawing a single black pixel over the
window. This sounds pretty dumb, but it appears to work well, and
there is no other API for that. (One could try to use the video mixer
for this purpose, since it has all kinds of features, including
compositing multiple RGBA surfaces and clearing the window background.
But it would require an invisible dummy video surface to make the
video mixer happy, and that's getting too messy.)
If close to chapter start, skipping back goes to previous chapter (no change).
If more than <threshold> seconds in, skipping back will now go to the beginning
of the current chapter instead.
The threshold is set by the new option --chapter-seek-threshold and defaults to
5 seconds. A negative value disables the new functionality.
The VDPAU default colorkey, although it seems to be driver specific, is
usually green. This is a pretty annoying color, and you usually see it
briefly (as flashes) if the VDPAU window resizes.
Change it to some shade of black. The new default color is close to what
MPlayer picks as colorkey (and apparently it worked well for them):
VdpColor vdp_bg = {0.01, 0.02, 0.03, 0};
Since our OPT_COLOR can set 8 bit colors only, we use '#020507' instead,
which should be the same assuming 8 bit colors.
Obviously, you can't use black, because black is a way too common color,
and would make it too easy to observe the colorkey effect when e.g.
moving a terminal with black background over the video window.
Formally, this sets the "background color" of the presentation queue.
But in practice, this color is also used as colorkey.
This commit doesn't change the VDPAU default yet.
One example in ao.rst used the old syntax with mangled device names.
Fix it. Mention some shell related caveats. Explicitly mention the
change of device name syntax in changes.rst, because it seems to be
a common issue.
Normally, --subcp always forces conversion. This really always forces
conversion, even if the UTF-8 check on the input succeeds.
Extend the --subcp to allow codepages as fallback if UTF-8 doesn't
work. So, for example --subcp=utf8:cp1250 will use UTF-8 if the input
looks like UTF-8, and will fall back to use cp1250 if the UTF-8 check
fails.
I think this should actually be the default, but on the other hand,
this changes the semantics of the option, and a user would actually
expect --subcp to force conversion, rather than silently using UTF-8
if that happens to work.
This is based on the MPlayer VA API patches. To be exact it's based on
a very stripped down version of commit f1ad459a263f8537f6c from
git://gitorious.org/vaapi/mplayer.git.
This doesn't contain useless things like benchmarking hacks and the
demo code for GLX interop. Also, unlike in the original patch, decoding
and video output are split into separate source files (the separation
between decoding and display also makes pixel format hacks unnecessary).
On the other hand, some features not present in the original patch were
added, like screenshot support.
VA API is rather bad for actual video output. Dealing with older libva
versions or the completely broken vdpau backend doesn't help. OSD is
low quality and should be rather slow. In some cases, only either OSD
or subtitles can be shown at the same time (because OSD is drawn first,
OSD is prefered).
Also, libva can't decide whether it accepts straight or premultiplied
alpha for OSD sub-pictures: the vdpau backend seems to assume
premultiplied, while a native vaapi driver uses straight. So I picked
straight alpha. It doesn't matter much, because the blending code for
straight alpha I added to img_convert.c is probably buggy, and ASS
subtitles might be blended incorrectly.
Really good video output with VA API would probably use OpenGL and the
GL interop features, but at this point you might just use vo_opengl.
(Patches for making HW decoding with vo_opengl have a chance of being
accepted.)
Despite these issues, decoding seems to work ok. I still got tearing
on the Intel system I tested (Intel(R) Core(TM) i3-2350M). It was also
tested with the vdpau vaapi wrapper on a nvidia system; however this
was rather broken. (Fortunately, there is no reason to use mpv's VAAPI
support over native VDPAU.)
Perhaps not very useful, but reserved for situations when a user reports
awful latency and experimentation/debugging might be required to find
out why or to fix it (happens often).
On success, print the filter chain on the OSD. Otherwise, show an error
message on the OSD (just enough so that the user knows whether the
command worked).
Move the URL parsing code from m_option.c to stream.c, and simplify it
dramatically. This code originates from times when http code used this,
but now it's just relict from other stream implementations reusing this
code. Remove the unused bits and simplify the rest.
stream_vcd is insane, and the priv struct is different on every
platform, so drop the URL parsing. This means you can't specify a track
anymore, only the device. (Does anyone use stream_vcd? Not like this
couldn't be fixed, but it doesn't seem worth the effort, especially
because it'd require potentially touching platform specific code.)
Remove the (now unused) code for determining correct-pts mode based on
the demuxer in use. Change its description in the manpage to reflect
what this option does now.
The "options" pseudo-property allows reading global like this:
show_text ${options/name}
Where "name" maps to the option "--name". This allows retrieving option
values that are not properties. Write-access is not possible: this is
reserved for normal properties.
Note: it is possible that we'll change this again, and don't require the "options/" prefix to access options.
Make the VF/VO/AO option parser available to audio filters. No audio
filter uses this yet, but it's still a quite intrusive change.
In particular, the commands for manipulating filters at runtime
completely change. We delete the old code, and use the same
infrastructure as for video filters. (This forces complete
reinitialization of the filter chain, which hopefully isn't a problem
for any use cases. The old code forced reinitialization too, but it
could potentially allow a filter to cache things; e.g. consider loaded
ladspa plugins and such.)
Doing "mpv --vo=opengl:lscale=help" now lists possible scalers and
exits. The "backend" suboption behaves similar. Make the "stereo"
suboption a choice, instead of using magic integer values.
These two options were supported by ALSA and OSS only. Further, their
values were specific to the respective audio systems, so it doesn't make
sense to keep them as top-level options.
This changes how device names are handled. Before this commit, device
names were mangled in strange ways to avoid clashing with the option
parser syntax. "." was replaced with ",", and "=" with ":" (the user had
to do the inverse to get the correct device name).
The "new" option parser has multiple ways to escape option strings, so
we don't need this confusing hack anymore.
Add an explicit note to the manpage as well.
DVD playback had some trouble with PTS resets: libavformat's genpts
feature would try reading until EOF (worst case) to find a new usable
PTS in case a packet's PTS is not set correctly. Especially with slow
DVD access, this would make the player to appear frozen.
Reimplement it partially in demux_lavf.c, and use that code in the DVD
case. This is heavily "inspired" by the code in av_read_frame from
libavformat/utils.c. The difference is that we stop reading if no PTS
has been found after 50 packets (consider this a heuristic). Also, we
don't bother with the PTS wrapping and last-frame-before-EOF handling.
Even with normal PTS wraps, the player frontend will go to hell for the
duration of a frame anyway, and should recover quickly after that.
The terribleness of this commit is mostly that we duplicate libavformat
functionality, and that we suddenly need a packet queue.
Get rid of the strange and messy reliance on DEMUXER_TYPE_ constants.
Instead of having two open functions for the demuxer callbacks (which
somehow are both optional, but you can also decide to implement both...),
just have one function. This function takes a parameter that tells the
demuxer how strictly it should check for the file headers. This is a
nice simplification and allows more flexibility.
Remove the file extension code. This literally did nothing (anymore).
Change demux_lavf so that we check our other builtin demuxers first
before libavformat tries to guess by file extension.
Add this option, which lets users set the cache size without forcing it
even when playing from the local filesystem.
Also document the default value explicitly.
The Matroska linked segments case is slightly simplified: they can
never come from network (mostly because it'd be insane, and we can't
even list files from network sources), so the cache will never be
enabled automatically.
Delete demux_avi, demux_asf, demux_mpg, demux_ts. libavformat does
better than them (except in rare corner cases), and the demuxers have
a bad influence on the rest of the code. Often they don't output
proper packets, and require additional audio and video parsing. Most
work only in --no-correct-pts mode.
Remove them to facilitate further cleanups.
stream_vstream.c in particular was actually dependent on the network
code, and didn't compile anymore.
Cleanup the protocol list in mpv.rst, and add some missing ones
supported by libavformat to stream_lavf.c.
This commit removes the "old" networking code in favor of libavformat's
code.
The code was still used for mp_http, udp, ftp, cddb. http has been
mapped to libavformat's http support since approximately 6 months ago.
udp and ftp have support in ffmpeg (though ftp was added only last
month). cddb support is removed with this commit - it's probably not
important and rarely used if at all, so we don't care about it.
percent-pos was an integer (0-100). Sometimes higher precision is
wanted, but the property is this way because fractional parts would
look silly with normal OSD usage. As a compromise, make percent-pos
double (i.e. includes fractional parts), but print it as integer.
So ${percent-pos} is like an integer, but not ${=percent-pos}.
Use the video decoder chroma location flags and render chroma locations
other than centered. Until now, we've always used the intuitive and
obvious centered chroma location, but H.264 uses something else.
FFmpeg provides a small overview in libavcodec/avcodec.h:
-----------
/**
* X X 3 4 X X are luma samples,
* 1 2 1-6 are possible chroma positions
* X X 5 6 X 0 is undefined/unknown position
*/
enum AVChromaLocation{
AVCHROMA_LOC_UNSPECIFIED = 0,
AVCHROMA_LOC_LEFT = 1, ///< mpeg2/4, h264 default
AVCHROMA_LOC_CENTER = 2, ///< mpeg1, jpeg, h263
AVCHROMA_LOC_TOPLEFT = 3, ///< DV
AVCHROMA_LOC_TOP = 4,
AVCHROMA_LOC_BOTTOMLEFT = 5,
AVCHROMA_LOC_BOTTOM = 6,
AVCHROMA_LOC_NB , ///< Not part of ABI
};
-----------
The visual difference is literally minimal, but since videophiles
apparently consider this detail as quality mark of a video renderer,
support it anyway. We don't bother with chroma locations other than
centered and left, though.
Not sure about correctness, but it's probably ok.
This adds support for libquvi 0.9.x, and these features:
- start time (part of youtube URL)
- youtube subtitles
- alternative source switching ('l' and 'L' keys)
- youtube playlists
Note that libquvi 0.9 is still in development. Although this seems to
be API stable now, it looks like there will be a 1.0 release, which is
supposed to be the next stable release and the actual successor of
libquvi 0.4.x.
Should we actually get into trouble for unproper handling of
frame-based subtitle formats, this might be the simplest way to
work this around. Also is a bit more intuitive than -subfps, which
might use an unknown, misdetected, or non-sense video FPS.
Still pretty silly, though.
This code was once part of subreader.c, then traveled to libass, and now
made its way back to the fork of the fork of the original code, MPlayer.
It works pretty much the same as subreader.c, except that we have to
concatenate some packets to do auto-detection. This is rather annoying,
but for all we know the actual source file could be a binary format.
Unlike subreader.c, the iconv context is reopened on each packet. This
is simpler, and with respect to multibyte encodings, more robust.
Reopening is probably not a very fast, but I suspect subtitle charset
conversion is not an operation that happens often or has to be fast.
Also, this auto-detection is disabled for microdvd - this is the only
format we know that has binary data in its packets, but is actually
decoded to text. FFmpeg doesn't really allow us to solve this properly,
because a) the input packets can be binary, and b) the output will be
checked whether it's UTF-8, and if it's not, the output is thrown away
and an error message is printed. We could just recode the decoded
subtitles before sd_ass if it weren't for that.
demux_libass.c allows us to make subtitle format detection part of the
normal file loading process. libass has no probe function, but trying to
load the start of a file (the first 4 KB) is good enough. Hope that
libass can even handle random binary input gracefully without printing
stupid log messages, and that the libass parser doesn't accept too many
non-ASS files as input.
This doesn't handle the -subcp option correctly yet. This will be fixed
later.
This fixes the -subfps option (which unfortunately is still useful),
and fixes minor annoying timing errors (which unfortunately still
happen).
Note that none of these affect ASS or image subtitles. ASS is specially
handled: libass loads subtitles as ASS_Track. There are no actual
packets passed around, and sd_ass just uses the ASS_Track.
Disable the --sub-no-text-pp option. It's misleading now and always was
completely useless.
Basically rewrite all the code supporting the cache (i.e. anything other
than the ringbuffer logic). The underlying design is untouched.
Note that the old cache2.c (on which this code is based) already had a
threading implementation. This was mostly unused on Linux, and had some
problems, such as using shared volatile variables for communication and
uninterruptible timeouts, instead of using locks for synchronization.
This commit does use proper locking, while still retaining the way the
old cache worked. It's basically a big refactor.
Simplify the code too. Since we don't need to copy stream ctrl args
anymore (we're always guaranteed a shared address space now), lots of
annoying code just goes away. Likewise, we don't need to care about
sector sizes. The cache uses the high-level stream API to read from
other streams, and sector sizes are handled transparently.
The core didn't use these fields, and use of them was inconsistent
accross AOs. Some didn't use them at all. Some only set them; the values
were completely unused by the core. Some made full use of them.
Remove these fields. In places where they are still needed, make them
private AO state.
Remove the --abs option. It set the buffer size for ao_oss and ao_dsound
(being ignored by all other AOs), and was already marked as obsolete. If
it turns out that it's still needed for ao_oss or ao_dsound, their
default buffer sizes could be adjusted, and if even that doesn't help,
AO suboptions could be added in these cases.
This allows having properties like time-pos in the window title update
properly. There is a danger of this causing significant CPU usage,
depending on the properties used and the window manager.
The use of filters prior to PNG compression can greatly improve
compression ratio, with "mixed" (ImageMagick calls it "adaptive")
typically achieving the best results.
Use the recently introduced screensaver VOCTRLs to control the
screensaver in the X11 backend. This means the behavior when paused
changes: the old code always kept the screensaver disabled, but now the
screensaver is reenabled on pausing.
Rename the --stop-xscreensaver option to --stop-screensaver and make it
more generic. Now it affects all backends that respond to the
screensaver VOCTRLs.
Whatever this was supposed to be originally, it doesn't have much value
anymore. It just forced ad_mpg123 to upmix mono to stereo by default
(the audio chain can do that). As an option, it was mostly useless and
misleading, so get rid of it.
The additional flags are needed to get the muxer to write the source
video frame rate (instead of a fallback) for 100% equivalence to the
replaced MPlayer/mplayer2 y4m writer.
show_chapters, show_tracks, and show_playlist are killed and replaced
with the properties chapter-list, track-list, and playlist. The code
and the output of these stays the same, this is just moving a lot of
code around and reducing the number of properties.
The "old" commands will still be supported for a while (to avoid making
everyone angry), so handle them with the legacy layer. Add something to
suppress printing the legacy warnings for these commands.
This commit addresses some issues with the users had with the previous
implementation in commit c39efb9. Here's the changes:
* Use Quartz Event Taps to remove Media Key events mpv handles from
the global OS X queue. This prevents conflicts with iTunes. I did this on
the main thread since it is mostly idling. It's the playloop thread that
actually does all the work so there is no danger of blocking the event tap
callback.
* Introduce `--no-media-keys` switch so that users can disable all of mpv's
media key handling at runtime (some prefer iTunes for example).
* Use mpv's bindings so that users can customize what the media keys do via
input.conf. Current bindings are:
MK_PLAY cycle pause
MK_PREV playlist_prev
MK_NEXT playlist_next
An additional benefit of this implementation is that it is completly handled
by the `macosx_events` file instead of `macosx_application` making the
project organization more straightforward.
This branch heavily refactors the subtitle code (both loading and
rendering), and adds support for a few new formats through FFmpeg.
We don't remove any of the old code yet. There are still some subtleties
related to subreader.c to be resolved: code page detection & conversion,
timing post-processing, UTF-16 subtitle support, support for the -subfps
option. Also, SRT reading and loading ASS via libass should be turned
into proper demuxers. (SRT is needed because Libav's is gravely broken,
and we want ASS loading via libass to cover full libass format support.
Both should be demuxers which are probed _before_ libavformat, so that
all subtitles can be loaded through the demuxer infrastructure, and
libavformat subtitles don't need to be treated in a special way.)
The -no-ass option used to disable all use of libass completely. This
doesn't work this way anymore, and the text subtitle path has an
inherent dependency on libass. Currently -no-ass does 3 things:
1. Strip tags and formatting on display, and use a separate renderer for
the result. (Which might be the terminal, or libass via OSD code.)
2. Not loading attached fonts from Matroska files.
3. Use subreader.c instead of libass for reading .ass files.
1. and 2. are ok and what the user (probably wants), but 3. doesn't
really make sense anymore. subreader.c reads .ass files just fine, but
then does some strange things to them (something about coalescing and
re-adding newlines?), leading to even more broken display with -no-ass.
Instead of fighting with subreader.c, just use libass as loader.
After killing the non functional AR support in c8fd9e5 I got much complaints so
this adds AR support back in (and it works). I am using the HIDRemote class by
Felix Schwarz and that part of the code is under the BSD license. I slightly
modified it replacing [NSApplication sharedApplication] with NSApp. The code
of the class is quite complex (probably because it had to deal with all the
edge cases with IOKit) but it works nicely as a black box.
In a later commit I'll remove the deprecation warnings caused by HIDRemote's
usage of Gestalt.
Check out `etc/input.conf` for the default bindings.
Apple Remote functionality is automatically compiled in when cocoa is enabled.
It can be disabled at runtime with the `--no-ar` option.
Most of these are rather questionable, the rest you rarely need to set
manually. You still can set all of them with -lavdopts-o (because
libavcodec has AVOptions for them).
This can control whether demux_lavf should use the HTTP mime type to
determine the format, instead of probing the data with the libavformat
API. Do this to allow easier debugging in case the mimetype is
incorrect. (This is done only for AAC streams right now.)
This is basically a "do not use" label. We don't remove them yet,
because we still support FFmpeg releases where we can not use
libavfilter for various reasons. Also, Libav causes pain as usual
due to the lack of ported mplayer filters in its codebase, so not
all filters will be available there.
Use a different algorithm to generate the dithering matrix. This
looks much better than the previous ordered dither matrix with its
cross-hatch artifacts.
The matrix generation algorithm as well as its implementation was
contributed by Wessel Dankers aka Fruit. The code in dither.c is
his implementation, reformatted and with static global variables
removed by me.
The new matrix is uploaded as float texture - before this commit, it
was a normal integer fixed point matrix. This means dithering will
be disabled on systems without float textures.
The size of the dithering matrix can be configured, as the matrix is
generated at runtime. The generation of the matrix can take rather
long, and is already unacceptable with size 8. The default is at 6,
which takes about 100 ms on a Core2 Duo system with dither.c compiled
at -O2, which I consider just about acceptable.
The old ordered dithering is still available and can be selected by
putting the dither=ordered sub-option. The ordered dither matrix
generation code was moved to dither.c. This function was originally
written by Uoti Urpala.
Mostly copied from vf_lavfi. The parts that could be shared are minor,
because most code is about setting up audio and video, which are too
different.
This won't work with Libav. I used ffplay.c as guide, and noticed too
late that their setup methods are incompatible with Libav's. Trying to
make it work with both would be too much effort. The configure test for
av_opt_set_int_list() should disable af_lavfi gracefully when compiling
with Libav.
Due to option parser chaos, you currently can't have a "," as part of
the filter graph string - not even with quoting or escaping. This will
probably be fixed later.
The audio filter chain is not PTS aware. So we have to do some hacks
to make up a fake PTS, and we have to map the output PTS back to the
filter chain's method of tracking PTS changes and buffering, by
adjusting af->delay.
Can be used to refer to filters by name. Intended to be used when the
filter chain is changed at runtime.
A label can be assigned to a filter by prefixing it with '@name:', where
'name' is an user-chosen identifier. For example, a filter added with
'-vf-add @label1:gradfun=123' can be removed with '-vf-del @label1'.
If a filter with an already existing label is added, the existing filter
is replaced with the new filter (this happens for both -vf-add and
-vf-pre). If a filter is replaced, the new filter takes the position of
the old filter, instead of being appended/prepended to the filter chain
as usual. For -vf-toggle, labels are compared if at least one of the
filters has a label; otherwise they are compared by filter name and
arguments (like before). This means two filters are never considered
equal if one has a label and the other one does not.
Also add a "raw" prefix for commands, which prevents property expansion.
The idea is that if the commands are generated by a program, it doesn't
have to know whether the command expands properties or not.
Add the "vf" command, which allows changing the video filter chain at
runtime. For example, the 'y' key could be bound to toggle deinterlacing
by adding 'y vf toggle yadif' to the input.conf.
Reconfiguring the video filter chain normally resets the VO, so that it
will be "stuck" until a new video frame is rendered. To mitigate this, a
seek to the current position is issued when the filter chain is changed.
This is done only if playback is paused, because normal playback will
show an actual new frame quickly enough.
If vdpau hardware decoding is used, filter insertion (whether it fails
or not) will break the video for a while. This is because vo_vdpau
resets decoding related things on vo_config().
Apparently useful for dumping DVD. Could also be used to rip streams
with libquvi and such, but for that there are better tools. Actually
I doubt there aren't better tools to dump DVDs, but whatever, this was
a feature request, so I don't need a good reason.
This adds Mission Control fullscreen functionality to mpv. Since this doesn't
play well with many of mpv's features disable it by default. Users can activate
this feature by using `--native-fs` when starting mpv.
Fixes#34
A "watch later" command is now mapped to Shift+Q. This quits the player
and stores the playback state in a config file in ~/.mpv/watch_later/.
When calling the player with the same file again, playback is resumed
at that time position.
It's also possible to make mpv save playback state always on quit with
the --save-position-on-quit option. Likewise, resuming can be disabled
with the --no-resume-playback option.
This also attempts to save some playback parameters, like fullscreen
state or track selection. This will unconditionally override config
settings and command line options (which is probably not what you would
expect, but in general nobody will really care about this). Some things
are not backed up, because that would cause various problems. Additional
subtitle files, video filters, etc. are not stored because that would be
too hard and fragile. Volume/mute state are not stored because it would
mess up if the system mixer is used, or if the system mixer was
readjusted in the meantime.
Basically, the tradeoff between perfect state restoration and
complexity/fragility makes it not worth to attempt to implement
it perfectly, even if the result is a little bit inconsistent.
