And remove all uses of the VFCAP_CSP_SUPPORTED* constants. This is
supposed to reduce conversions if many filters are used (with many
incompatible pixel formats), and also for preferring the VO's natively
supported pixel formats (as opposed to conversion).
This is worthless by now. Not only do the main VOs not use software
conversion, but also the way vf_lavfi and libavfilter work mostly break
the way the old MPlayer mechanism worked. Other important filters like
vf_vapoursynth do not support "proper" format negotation either.
Part of this was already removed with the vf_scale cleanup from today.
While I'm touching every single VO, also fix the query_format argument
(it's not a FourCC anymore).
Commit d38bc531 is incorrect: the 50ms queue-ahead value and the flip
queue offset have different functions. The latter is about calling
flip_page in advance, so the change attempted to show video frames 50ms
in advance on all VOs.
The change was for vo_opengl_cb, but that can be handled differently.
Same as with the previous commits.
In theory, vdpau/x11 GL interop doesn't assume GLX. It could use EGL as
well. But since it's always GLX in practice, so we're fine with this.
Remove the gl_hwdec.mpgl field - it's unused now.
Add a generic mechanism to the VO to relay "extra" events from VO to
player. Use it to notify the core of window resizes, which in turn will
be used to mark all affected properties ("window-scale" in this case) as
changed.
(I refrained from hacking this as internal command into input_ctx, or to
poll the state change, etc. - but in the end, maybe it would be best to
actually pass the client API context directly to the places where events
can happen.)
At least on kwin, we decide to proceed without waiting for the window
being mapped (due to the frame exts hack, see commit 8c002b79). But that
leaves us with a window size of 0x0, which causes VdpOutputSurfaceCreate
to fail. This prints some warnings, although vo_vdpau recovers later and
this has no other bad consequences.
Do the following things to deal with this:
- set the "known" window size to the suggested window size before the
window is even created
- allow calling XGetGeometry on the window even if the window is not
mapped yet (this should work just fine)
- make the output surface minimum size 1x1
Strictly speaking, only one of these would be required to make the
warning disappear, but they're all valid changes and increase robustness
and correctness. At no point we use a window size of 0x0 as magic value
for "unset" or unknown size, so keeping it unset has no purpose anyway.
CC: @mpv-player/stable
vo_vdpau uses its own framedrop code, mostly for historic reasons. It
has some tricky heuristics, of which I'm not sure how they work, or if
they have any effect at all, but in any case, I want to keep this code
for now. One day it might get fully ported to the vo.c framedrop code,
or just removed.
But improve its interaction with the user-visible framedrop controls.
Make --framedrop actually enable and disable the vo_vdpau framedrop
code, and increment the number of dropped frames correctly.
The code path for other VOs should be equivalent. The vo_vdpau behavior
should, except for the improvements mentioned above, be mostly
equivalent as well. One minor change is that frames "shown" during
preemption are always count as dropped.
Remove the statement from the manpage that vo_vdpau is the default; this
hasn't been the case for a while.
vc->vsync_interval and vsync_interval should be the same value, but
actually vc->vsync_interval was updated after vsync_interval was
initialized. This was probably not intended. Fix this by removing the
duplicate local variable. There were probably no bad effects.
This works only on X11, and only if the refresh rate changes due to the
window being moved to another screen (detected by us). It doesn't
include system screen reconfiguration yet.
This calls VOCTRL_GET_DISPLAY_FPS on every frame, which makes me uneasy.
It means extra thread communication with the win32 and Cocoa backends.
On the other hand, a frame doesn't happen _that_ often, and the
communication should still be pretty cheap and fast, so it's probably
ok.
Also needs some extra fuzz for vo_vdpau.c, because that does everything
differently.
Drop use of the ancient XF86VM, and use the slightly less ancient Xrandr
extension to retrieve the refresh rate. Xrandr has the advantage that it
supports multiple monitors (at least the modern version of it).
For now, we don't attempt any dynamic reconfiguration. We don't request
and listen to Xrandr events, and we don't notify the VO code of changes
in the refresh rate. (The later works by assuming that X coordinates map
directly to Xrandr coordinates, which probably is wrong with compositing
window manager, at least if these use complicated transformations. But I
know of no API to handle this.)
It would be nice to drop use of the Xinerama extension too, but
unfortunately, at least one EWMH feature uses Xinerama screen numbers,
and I don't know how that maps to Xrandr outputs.
This mostly uses the same idea as with vo_vdpau.c, but much simplified.
On X11, it tries to get the display framerate with XF86VM, and limits
the frequency of new video frames against it. Note that this is an old
extension, and is confirmed not to work correctly with multi-monitor
setups. But we're using it because it was already around (it is also
used by vo_vdpau).
This attempts to predict the next vsync event by using the time of the
last frame and the display FPS. Even if that goes completely wrong,
the results are still relatively good.
On other systems, or if the X11 code doesn't return a display FPS, a
framerate of 1000 is assumed. This is infinite for all practical
purposes, and means that only frames which are definitely too late are
dropped. This probably has worse results, but is still useful.
"--framedrop=yes" is basically replaced with "--framedrop=decoder". The
old framedropping mode is kept around, and should perhaps be improved.
Dropping on the decoder level is still useful if decoding itself is too
slow.
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
With software decoding, images were uploaded to vdpau surfaces as they
were queued to the VO. This makes it slightly more complicated
(especially later on), and has no advantages - so stop doing it.
The only reason why this was done explicitly was due to attempts to keep
the code equivalent (instead of risking performance regressions). The
original code did this naturally for certain reasons, but now that we
can measure that it has no advantages and just requires extra code, we
can just drop it.
Until now, failure to allocate image data resulted in a crash (i.e.
abort() was called). This was intentional, because it's pretty silly to
degrade playback, and in almost all situations, the OOM will probably
kill you anyway. (And then there's the standard Linux overcommit
behavior, which also will kill you at some point.)
But I changed my opinion, so here we go. This change does not affect
_all_ memory allocations, just image data. Now in most failure cases,
the output will just be skipped. For video filters, this coincidentally
means that failure is treated as EOF (because the playback core assumes
EOF if nothing comes out of the video filter chain). In other
situations, output might be in some way degraded, like skipping frames,
not scaling OSD, and such.
Functions whose return values changed semantics:
mp_image_alloc
mp_image_new_copy
mp_image_new_ref
mp_image_make_writeable
mp_image_setrefp
mp_image_to_av_frame_and_unref
mp_image_from_av_frame
mp_image_new_external_ref
mp_image_new_custom_ref
mp_image_pool_make_writeable
mp_image_pool_get
mp_image_pool_new_copy
mp_vdpau_mixed_frame_create
vf_alloc_out_image
vf_make_out_image_writeable
glGetWindowScreenshot
Let the VOs draw the OSD on their own, instead of making OSD drawing a
separate VO driver call. Further, let it be the VOs responsibility to
request subtitles with the correct PTS. We also basically allow the VO
to request OSD/subtitles at any time.
OSX changes untested.
mpv supports two hardware decoding APIs on Linux: vdpau and vaapi. Each
of these has emulation wrappers. The wrappers are usually slower and
have fewer features than their native opposites. In particular the libva
vdpau driver is practically unmaintained.
Check the vendor string and print a warning if emulation is detected.
Checking vendor strings is a very stupid thing to do, but I find the
thought of people using an emulated API for no reason worse.
Also, make --hwdec=auto never use an API that is detected as emulated.
This doesn't work quite right yet, because once one API is loaded,
vo_opengl doesn't unload it, so no hardware decoding will be used if the
first probed API (usually vdpau) is rejected. But good enough.
Integrate it with the existing surface allocator in vdpau.c. The changes
are a bit violent, because the vdpau API is so non-orthogonal: compared
to video surfaces, output surfaces use a different ID type, different
format types, and different API functions.
Also, introduce IMGFMT_VDPAU_OUTPUT for VdpOutputSurfaces wrapped in
mp_image, rather than hacking it. This is a bit cleaner.
black_pixel is an (apparently necessary) 1x1 black surface used for
clearing the screen. It was allocated in RGB mode only, but is sometimes
used in YUV mode too.
Use the newly provided mp_vdpau_handle_preemption() function, instead of
accessing mp_vdpau_ctx fields directly. Will probably make multithreaded
access to the vdpau context easier.
Mostly unrelated to the actual changes, I've noticed that using hw
decoding with vo_opengl sometimes leads to segfaults inside of nvidia's
libGL when doing the following:
1. use hw decoding + vo_opengl
2. switch to console (will preempt on nvidia systems)
3. switch back to X (mpv will recover, switches to sw decoding)
4. enable hw decoding again
5. exit mpv
Then it segfaults when mpv finally calls exit(). I'll just blame nvidia,
although it seems likely that something in the gl_hwdec_vdpau.c
preemption handling triggers corner cases in nvidia's code.
This was a minor code duplication between vf_vdpaupp.c and vo_vdpau.c.
(In theory, we could always require using vf_vdpaupp with vo_vdpau, but
I think it's better if vo_vdpau can work standalone.)
Remove the special casing of vo_vdpau vs. other VOs. Replace the
complicated interaction between vo.c and vo_vdpau.c with a simple queue
in vo.c. VOs other than vdpau are handled by setting the length of the
queue to 1 (this is essentially what waiting_mpi was).
Note that vo_vdpau.c seems to have buffered only 1 or 2 frames into the
future, while the remaining 3 or 4 frames were past frames. So the new
code buffers 2 frames (vo_vdpau.c requests this queue length by setting
vo->max_video_queue to 2). It should probably be investigated why
vo_vdpau.c kept so many past frames.
The field vo->redrawing is removed. I'm not really sure what that would
be needed for; it seems pointless.
Future directions include making the interface between playloop and VO
simpler, as well as making rendering a frame a single operation, as
opposed to the weird 3-step sequence of rendering, drawing OSD, and
flipping.
The previous commits changed vo_vdpau so that these options are set by
vf_vdpaupp, and the corresponding vo_vdpau were ignored. But for
compatibility, keep the "old" options working.
The value of this is questionable - maybe the vo_vdpau options should
just be removed. For now, at least demonstrate that it's possible.
The "deint" suboption still doesn't work, because the framerate doubling
logic required for some deint modes was moved to vf_vdpaupp. This
requires more elaborate workarounds.
This is slightly incomplete: the mixer options, such as sharpen and
especially deinterlacing, are ignored. This also breaks automatic
enabling of interlacing with 'D' or --deinterlace. These issues will be
fixed later in the following commits.
Note that we keep all the custom vdpau queue stuff. This will also be
simplified later.
In theory, returning the screenshot with original pixel aspect would
allow avoiding scaling them with image formats that support non-square
pixels, but in practice this isn't used anyway (nothing seems to
understand e.g. jpeg aspect ratio tags).
This might be a good idea in order to prevent queuing a frame too far in
the future (causing apparent freezing of the video display), or dropping
an infinite number of frames (also apparent as freezing).
I think at this point this is most of what we can do if the vdpau time
source is unreliable (like with Mesa). There are still inherent race
conditions which can't be fixed.
The strange thing about this code was the shift parameter of the
prev_vs2 function. The parameter is used to handle timestamps before the
last vsync, since the % operator handles negative values incorrectly.
Most callers set shift to 0, and _usually_ pass a timestamp after the
last vsync. One caller sets it to 16, and can pass a timestamp before
the last timestamp.
The mystery is why prev_vs2 doesn't just compensate for the % operator
semantics in the most simple way: if the result of the operator is
negative, add the divisor to it. Instead, it adds a huge value to it
(how huge is influenced by shift). If shift is 0, the result of the
function will not be aligned to vsyncs.
I have no idea why it was written in this way. Were there concerns about
certain numeric overflows that could happen in the calculations? But I
can't think of any (the difference between ts and vc->recent_vsync_time
is usually not that huge). Or is there something more clever about it,
which is important for the timing code? I can't think of anything
either.
So scrap it and simplify it.
vo_vdpau used a somewhat complicated and fragile mechanism to convert
the vdpau time to internal mpv time. This was fragile as in it couldn't
deal well with Mesa's (apparently) random timestamps, which can change
the base offset in multiple situations. It can happen when moving the
mpv window to a different screen, and somehow it also happens when
pausing the player.
It seems this mechanism to synchronize the vdpau time is not actually
needed. There are only 2 places where sync_vdptime() is used (i.e.
returning the current vdpau time interpolated by system time).
The first call is for determining the PTS used to queue a frame. This
also uses convert_to_vdptime(). It's easily replaced by querying the
time directly, and adding the wait time to it (rel_pts_ns in the patch).
The second call is pretty odd: it updates the vdpau time a second time
in the same function. From what I can see, this can matter only if
update_presentation_queue_status() is very slow. I'm not sure what to
make out of this, because the call merely queries the presentation
queue. Just assume it isn't slow, and that we don't have to update the
time.
Another potential issue with this is that we call VdpPresentationQueueGetTime()
every frame now, instead of every 5 seconds and interpolating the other
calls via system time. More over, this is per video frame (which can be
portantially dropped, and not per actually displayed frame. Assume this
doesn't matter.
This simplifies the code, and should make it more robust on Mesa. But
note that what Mesa does is obviously insane - this is one situation
where you really need a stable time source. There are still plenty of
race condition windows where things can go wrong, although this commit
should drastically reduce the possibility of this.
In my tests, everything worked well. But I have no access to a Mesa
system with vdpau, so it needs testing by others.
See github issues #520, #694, #695.
Reduce most dependencies on struct mp_csp_details, which was a bad first
attempt at dealing with colorspace stuff. Instead, consistently use
mp_image_params.
Code which retrieves colorspace matrices from csputils.c still uses this
type, though.
They were used by ancient libavcodec versions. This also removes the
need to distinguish vdpau image formats at all (since there is only
one), and some code can be simplified.
The main difference between the old and new callbacks is that the old
callbacks required passing the window size, which is and always was very
inconvenient and confusing, since the window size is already in
vo->dwidth and vo->dheight.
vo->aspdat is basically an outdated version of vo->params, plus some
weirdness. Get rid of it, which will allow further cleanups and which
will make multithreading easier (less state to care about).
Also, simplify some VO code by using mp_image_set_attributes() instead
of caring about display size, colorspace, etc. manually. Add the
function osd_res_from_image_params(), which is often needed in the case
OSD renders into an image.
Do two things:
1. add locking to struct osd_state
2. make struct osd_state opaque
While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses
lots of osd_state (and osd_object) members. To make sure everything is
accessed synchronously, I prefer making osd_state opaque, even if it
means adding pretty dumb accessors.
All of this is meant to allow running VO in their own threads.
Eventually, VOs will request OSD on their own, which means osd_state
will be accessed from foreign threads.
Note that this will print a difference even with perfect sync, because
the code queues the frames _between_ vsync, probably for error margin
(though I don't understand why it uses the exact values chosen).
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The --flip option flipped the image upside-down, by trying to use VO
support, or if not available, by inserting a video filter. I'm not sure
why it existed. Maybe it was important in ancient times when VfW based
decoders output an image this way (but even then, flipping an image is a
free operation by negating the stride).
One nice thing about this is that it provided a possible path for
implementing video orientation, which is a feature we should probably
support eventually. The important part is that it would be for free for
VOs that support it, and would work even with hardware decoding.
But for now get rid of it. It's useless, trivial, stands in the way, and
supporting video orientation would require solving other problems first.
The old ffmpeg vdpau support code uses separate vdpau pixel formats for
each decoder (pretty much because mplayer's architecture sucked), which
just gets into the way. Force the old decoder's output to IMGFMT_VDPAU,
and remove IMGFMT_IS_VDPAU() where we can remove it.
This should completely remove the differences betwene the old and new
vdpau decoder outside of the decoder.
This means most code accessing this struct must now include hwdec.h
instead of dec_video.h. I just put it into dec_video.h at first because
I thought a separate file would be a waste, but it's more proper to do
it this way, as there are too many files which include dec_video.h only
to get the mp_hwdec_info definition.
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
This one really did bite me hard (see previous commit), so enable it by
default.
Fix some cases of shadowing throughout the codebase. None of these
change behavior, and all of these were correct code, and just tripped up
the warning.
vo_vdpau is the only VO which implements VOCTRL_RESET. Redrawing the
last output frame is hard, because the output could consist of several
source video frames with certain types of post-processing
(deinterlacing). Implement redrawing as special case by keeping the
previous video frames aside until at least one new frame is decoded.
This improves the previous commit, but is separate, because it's rather
complicated.
Before, a VO could easily refuse to respond to VOCTRL_REDRAW_FRAME,
which means the VO wouldn't redraw OSD and window contents, and the
player would appear frozen to the user. This was a bit stupid, and makes
dealing with some corner cases much harder (think of --keep-open, which
was hard to implement, because the VO gets into this state if there are
no new video frames after a seek reset).
Change this, and require VOs to always react to VOCTRL_REDRAW_FRAME.
There are two aspects of this: First, behavior after a (successful)
vo_reconfig() call, but before any video frame has been displayed.
Second, behavior after a vo_seek_reset().
For the first issue, we define that sending VOCTRL_REDRAW_FRAME after
vo_reconfig() should clear the window with black. This requires minor
changes to some VOs. In particular vaapi makes this horribly
complicated, because OSD rendering is bound to a video surface. We
create a black dummy surface for this purpose.
The second issue is much simpler and works already with most VOs: they
simply redraw whatever has been uploaded previously. The exception is
vdpau, which has a complicated mechanism to track and filter video
frames. The state associated with this mechanism is completely cleared
with vo_seek_reset(), so implementing this to work as expected is not
trivial. For now, we just clear the window with black.
Apparently this was dropped some years ago, but judging from MPlayer's
handling of this, the original code wasn't so great anyway. The new
code handling clearing of panscan borders correctly, and integrates
better with the YUV path. (Although the VDPAU API sure makes this
annoying with its separate surface types for RGB.)
Note that we create 5 surfaces for some reason - I don't think this
makes too much sense (because we can't use the deinterlacer with RGB
surfaces), but at least it reduces the amount of differences with
the YUV code path.
Clearing the borders is done by drawing a single black pixel over the
window. This sounds pretty dumb, but it appears to work well, and
there is no other API for that. (One could try to use the video mixer
for this purpose, since it has all kinds of features, including
compositing multiple RGBA surfaces and clearing the window background.
But it would require an invisible dummy video surface to make the
video mixer happy, and that's getting too messy.)
When panscan was used, i.e. the video is cropped to make the video fill
the screen if video and screen aspects don't match, screenshots
contained only the visible region of the source video, stretched to
original video size.
The VDPAU default colorkey, although it seems to be driver specific, is
usually green. This is a pretty annoying color, and you usually see it
briefly (as flashes) if the VDPAU window resizes.
Change it to some shade of black. The new default color is close to what
MPlayer picks as colorkey (and apparently it worked well for them):
VdpColor vdp_bg = {0.01, 0.02, 0.03, 0};
Since our OPT_COLOR can set 8 bit colors only, we use '#020507' instead,
which should be the same assuming 8 bit colors.
Obviously, you can't use black, because black is a way too common color,
and would make it too easy to observe the colorkey effect when e.g.
moving a terminal with black background over the video window.
Formally, this sets the "background color" of the presentation queue.
But in practice, this color is also used as colorkey.
This commit doesn't change the VDPAU default yet.
Instead of generating vdpau_template.c with a Perl script, just include
the generated file in git. This is ok because it changes very rarely,
and the script is larger than the output it generates.
It also simplify the Makefile, and fixes the build. The problem was that
transitive dependencies do not work with generated files: there is no
dependency information yet when building it the first time. I overlooked
this because I didn't delete the .d files for testing (which contained
the correct dependencies, but only _after_ a first successful build).
Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This
file is named so because because it's written against the "old"
libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau").
Add support for the "new" libavcodec vdpau support. This was recently
added and replaces the "old" vdpau parts. (In fact, Libav is about to
deprecate and remove the "old" API without deprecation grace period,
so we have to support it now. Moreover, there will probably be no Libav
release which supports both, so the transition is even less smooth than
we could hope, and we have to support both the old and new API.)
Whether the old or new API is used is checked by a configure test: if
the new API is found, it is used, otherwise the old API is assumed.
Some details might be handled differently. Especially display preemption
is a bit problematic with the "new" libavcodec vdpau support: it wants
to keep a pointer to a specific vdpau API function (which can be driver
specific, because preemption might switch drivers). Also, surface IDs
are now directly stored in AVFrames (and mp_images), so they can't be
forced to VDP_INVALID_HANDLE on preemption. (This changes even with
older libavcodec versions, because mp_image always uses the newer
representation to make vo_vdpau.c simpler.)
Decoder initialization in the new code tries to deal with codec
profiles, while the old code always uses the highest profile per codec.
Surface allocation changes. Since the decoder won't call config() in
vo_vdpau.c on video size change anymore, we allow allocating surfaces
of arbitrary size instead of locking it to what the VO was configured.
The non-hwdec code also has slightly different allocation behavior now.
Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau
doesn't work anymore (a warning suggesting the --hwdec option is
printed instead).
In general, this warning can hint to actual bugs. We don't enable it
yet, because it would conflict with some unmerged code, and we should
check with clang too (this commit was done by testing with gcc).
There was a MPOpts fullscreen field, a mp_vo_opts.fs field, and
VOFLAG_FULLSCREEN. Remove all these and introduce a
mp_vo_opts.fullscreen flag instead.
When VOs receive VOCTRL_FULLSCREEN, they are supposed to set the
current fullscreen mode to the state in mp_vo_opts.fullscreen. They
also should do this implicitly on config().
VOs which are capable of doing so can update the mp_vo_opts.fullscreen
if the actual fullscreen mode changes (e.g. if the user uses the
window manager controls). If fullscreen mode switching fails, they
can also set mp_vo_opts.fullscreen to the actual state.
Note that the X11 backend does almost none of this, and it has a
private fs flag to store the fullscreen flag, instead of getting it
from the WM. (Possibly because it has to deal with broken WMs.)
The fullscreen option has to be checked on config() to deal with
the -fs option, especially with something like:
mpv --fs file1.mkv --{ --no-fs file2.mkv --}
(It should start in fullscreen mode, but go to windowed mode when
playing file2.mkv.)
Wayland changes by: Alexander Preisinger <alexander.preisinger@gmail.com>
Cocoa changes by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
Separate the video output options from the big MPOpts structure and also only
pass the new mp_vo_opts structure to the vo backend.
Move video_driver_list into mp_vo_opts
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
OPT_BASE_STRUCT defines which struct the OPT_ macros (like OPT_INT etc.)
reference implicitly, since these macros take struct member names but no
struct type. Normally, only cfg-mplayer.h should need this, and other
places shouldn't be bothered with having to #undef it.
(Some files, like demux_lavf.c, still store their options in MPOpts. In
the long term, this should be removed, and handled like e.g. with VO
suboptions instead.)
VFCAP_OSD was used to determine at runtime whether the VO supports OSD
rendering. This was mostly unused. vo_direct3d had an option to disable
OSD (was supposed to allow to force auto-insertion of vf_ass, but we
removed that anyway). vo_opengl_old could disable OSD rendering when a
very old OpenGL version was detected, and had an option to explicitly
disable it as well.
Remove VFCAP_OSD from everything (and some associated logic). Now the
vo_driver.draw_osd callback can be set to NULL to indicate missing OSD
support (important so that vo_null etc. don't single-step on OSD
redraw), and if OSD support depends on runtime support, the VO's
draw_osd should just do nothing if OSD is not available.
Also, do not access vo->want_redraw directly. Change the want_redraw
reset logic for this purpose, too. (Probably unneeded, vo_flip_page
resets it already.)
create_window is really bad naming, because this function can be called
multiple times, while the name implies that it always creates a new
window. At least the name config_window is not actively misleading.
OPT_MAKE_FLAGS() used to emit two options (one with "no" prefixed),
but that has been long removed by special casing flag options in the
option parser. OPT_FLAG_ON() used to imply that there's no "no-"
prefixed option, but this hasn't been the case for a while either.
(Conceptually, it has been replaced by OPT_FLAG_STORE().)
Remove OPT_FLAG_OFF, which was unused.
Normally, all flag options can be negated by prepending a "no-", for
example "--no-opt" becomes "--opt=no". Some flag options can't actually
be negated, so add a CONF_TYPE_STORE option type to disallow the "no-"
fallback.
Do the same for choice options. Remove the explicit "no-" prefixed
options, add "no" as choice.
Move the handling of automatic "no-" options from parser-mpcmd.c to
m_config.c, and use it in m_config_set_option/m_config_parse_option.
This makes these options available in the config file. It also
simplifies sub-option parsing, because it doesn't need to handle "no-"
anymore.
Don't force VOs to pick an arbitrary default Visual and Colormap. They
still can override them if needed. This simplifies the X11 VO interface.
Always create a Colormap for simplicity. Using CopyFromParent fails if
the selected visual is not the same of that of the parent window, which
happens for me with vo_opengl.
vo_vdpau and vo_xv explicitly set CWBorderPixel, do that in x11_common
instead (it was already done for native windows, but not for slave mode
windows).
What gl_common did was incorrect in theory: freeing a colormap while a
window uses it will change the colormap of the window to "None", and
the color mapping for such windows is "undefined".
Some parts for initiating mode switches were duplicated in every VO
supporting X11 (except vo_opengl/gl_common, which didn't support mode
switching). Move this to x11_common.c.
Note that this might be slightly risky: is it really guaranteed that no
VO needed to do "special" setup that depends on X parameters changing
after a mode switch, such as bit depth, visuals etc.? From what I can
see, this shouldn't be the case (X probably can't even change depth on
the fly). Even if this should be a one-way road, VM switching is in
general very useless, and its implementation buggy, so it can just be
removed should unfixable problems arise.
Move things that are used by vo_xv only into vo_xv, same for vo_x11.
Rename some functions exported by x11_common, like vo_init to
vo_x11_common. Make functions not used outsode of x11_common.c private
to that file. Eliminate all global variables defined by x11_common
(except error handler and colormap stuff).
There shouldn't be any functional changes, and only code is moved
around. There are some minor simplifications in the X11 init code, as
we completely remove the ability to initialize X11 and X11+VO
separately (see commit b4d9647 "mplayer: do not create X11 state in player frontend"),
and the respective functions are conflated into vo_x11_init() and
vo_x11_uninit().
Using vdpau on an X server configured to a bit depth of 30 (10 bit per
component) failed finding a visual. The cause was a hack that tried to
normalize the bit depth to 24 if it was not a known depth. It's unknown
why/if this is needed, but the following things speak against it:
- it prevented unusual bit depths like 30 bit from working
- it wasn't needed with normal bit depth like 24 bit
- it's probably copy-pasted from vo_x11 (where this code possibly makes
sense, unlike in vo_vdpau)
Just remove this code and look for a visual with native depth.
mplayer's video chain traditionally used FourCCs for pixel formats. For
example, it used IMGFMT_YV12 for 4:2:0 YUV, which was defined to the
string 'YV12' interpreted as unsigned int. Additionally, it used to
encode information into the numeric values of some formats. The RGB
formats had their bit depth and endian encoded into the least
significant byte. Extended planar formats (420P10 etc.) had chroma
shift, endian, and component bit depth encoded. (This has been removed
in recent commits.)
Replace the FourCC mess with a simple enum. Remove all the redundant
formats like YV12/I420/IYUV. Replace some image format names by
something more intuitive, most importantly IMGFMT_YV12 -> IMGFMT_420P.
Add img_fourcc.h, which contains the old IDs for code that actually uses
FourCCs. Change the way demuxers, that output raw video, identify the
video format: they set either MP_FOURCC_RAWVIDEO or MP_FOURCC_IMGFMT to
request the rawvideo decoder, and sh_video->imgfmt specifies the pixel
format. Like the previous hack, this is supposed to avoid the need for
a complete codecs.cfg entry per format, or other lookup tables. (Note
that the RGB raw video FourCCs mostly rely on ffmpeg's mappings for NUT
raw video, but this is still considered better than adding a raw video
decoder - even if trivial, it would be full of annoying lookup tables.)
The TV code has not been tested.
Some corrective changes regarding endian and other image format flags
creep in.
Change the entire filter API to use reference counted images instead
of vf_get_image().
Remove filter "direct rendering". This was useful for vf_expand and (in
rare cases) vf_sub: DR allowed these filters to pass a cropped image to
the filters before them. Then, on filtering, the image was "uncropped",
so that black bars could be added around the image without copying. This
means that in some cases, vf_expand will be slower (-vf gradfun,expand
for example).
Note that another form of DR used for in-place filters has been replaced
by simpler logic. Instead of trying to do DR, filters can check if the
image is writeable (with mp_image_is_writeable()), and do true in-place
if that's the case. This affects filters like vf_gradfun and vf_sub.
Everything has to support strides now. If something doesn't, making a
copy of the image data is required.
Setting the size of a mp_image must be done with mp_image_set_size()
now. Do this to guarantee that the redundant fields (like chroma_width)
are updated consistently. Replacing the redundant fields by function
calls would probably be better, but there are too many uses of them,
and is a bit less convenient.
Most code actually called mp_image_setfmt(), which did this as well.
This commit just makes things a bit more explicit.
Warning: the video filter chain still sets up mp_images manually,
and vf_get_image() is not updated.
vdpau hardware decoding used the DR (direct rendering) path to let the
decoder query a surface from the VO. Special-case the HW decoding path
instead, to make it separate from DR.
Slices allowed filtering or drawing video in horizontal bands or
blocks. This allowed working on the video in smaller units. In theory,
this could bring a performance win by lowering cache pressure, as you
didn't have to keep the whole video frame in cache while filtering,
only the slice.
In practice, the slice code path was barely used for the following
reasons:
- Multithreaded decoding with ffmpeg didn't use slices. The ffmpeg
slice callback was disabled, because it can be called from another
thread, and the mplayer video chain is not thread-safe.
- There was nothing that would turn "full" images into appropriate
slices, so slices were rarely used.
- Most filters didn't actually support slices.
On the other hand, supporting slices lead to code duplication and more
complex code in general. I made some experiments and didn't find any
actual measurable performance improvements when using slices. Even
ffmpeg removed slices based filtering from libavfilter in favor of
simpler code.
The most broken thing about the slices code path is that slices can't
be queued, like it is done for images in vo.c.
For some reason, libavcodec abuses the slices rendering code path for
hardware decoding: in that case, the only purpose of the draw callback
is to pass a vdpau video surface object to video output. (It is unclear
to me why this had to use the slices code, instead of just returning an
AVFrame with the required vdpau state.)
Make this code separate within mpv, so that the internal slices code
path is not used for hardware decoding. Pass the vdpau state with
VOCTRL_HWDEC_DECODER_RENDER instead.
Remove the mencoder specific VOCTRLs.
Remove VOCTRL_DRAW_IMAGE and always set vo_driver.draw_image in VOs.
Make draw_image mandatory: change some VOs (like vo_x11) to support it,
and remove the image-to-slices fallback in vf_vo.
Remove vo_driver.is_new. This member indicated whether draw_image is
supported unconditionally, which is now always the case.
draw_image_pts is a hack until the video filter chain is changed to
include the PTS as field in mp_image. Then vo_vdpau and vo_lavc will
be changed to use draw_image.
The -zoom option enabled scaling with vo_x11. Remove the -zoom option,
and make its behavior default. Since vo_x11 has to use libswscale for
colorspace conversion anyway, which doesn't do actual extra scaling when
vo_x11 is run in windowed mode, there should be no speed difference with
this change.
The code removed from vf_scale attempted to scale the video to d_width/
d_height, which matters for anamorphic video and the --xy option only.
vo_x11 can handle these natively. The only case for which the removed
vf_scale code could matter is encoding with vo_lavc, but since that
didn't set VOFLAG_SWSCALE, nothing actually changes.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
wm4
Jonas Zetterberg
Stefano Pigozzi
Alexander Preisinger
Rudolf Polzer