Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
Change how the video decoding loop works. The structure should now be a
bit easier to follow. The interactions on format changes are (probably)
simpler. This also aligns the decoding loop with future planned changes,
such as moving various things to separate threads.
This collects statistics and other things. The option dumps raw data
into a file. A script to visualize this data is included too.
Litter some of the player code with calls that generate these
statistics.
In general, this will be helpful to debug timing dependent issues, such
as A/V sync problems. Normally, one could argue that this is the task of
a real profiler, but then we'd have a hard time to include extra
information like audio/video PTS differences. We could also just
hardcode all statistics collection and processing in the player code,
but then we'd end up with something like mplayer's status line, which
was cluttered and required a centralized approach (i.e. getting the data
to the status line; so it was all in mplayer.c). Some players can
visualize such statistics on OSD, but that sounds even more complicated.
So the approach added with this commit sounds sensible.
The stats-conv.py script is rather primitive at the moment and its
output is semi-ugly. It uses matplotlib, so it could probably be
extended to do a lot, so it's not a dead-end.
It's not really needed to be public. Other code can just use mp_image.
The only disadvantage is that the other code needs to call an accessor
to get the VASurfaceID.
Although I at first thought it would be better to have a separate
implementation for hwaccels because the difference to software images
are too large, it turns out you can actually save some code with it.
Note that the old implementation had a small memory management bug. This
got painted over in commit 269c1e1, but is hereby solved properly.
Also note that I couldn't test vf_vavpp.c (due to lack of hardware), and
I hope I didn't accidentally break it.
They were used by ancient libavcodec versions. This also removes the
need to distinguish vdpau image formats at all (since there is only
one), and some code can be simplified.
Instead of doing it on every seek (libavcodec calls get_format on every
seek), reinitialize the decoder only if the video resolution changes.
Note that this may be relatively naive, since we e.g. (or: in
particular) don't check for profile changes. But it's not worse than the
state before the get_format change, and at least it paints over the
current vaapi breakage (issue #646).
This "sometimes" crashed when seeking. The fault apparently lies in
libavcodec: the decoder returns an unreferenced frame! This is
completely insane, but somehow I'm apparently still expected to
work this around. As a reaction, I will drop Libav 9 support in the
next commit. (While this commit will go into release/0.3.)
Apparently the "right" place to initialize the hardware decoder is in
the libavcodec get_format callback.
This doesn't change vda.c and vdpau_old.c, because I don't have OSX, and
vdpau_old.c is probably going to be removed soon (if Libav ever manages
to release Libav 10). So for now the init_decoder callback added with
this commit is optional.
This also means vdpau.c and vaapi.c don't have to manage and check the
image parameters anymore.
This change is probably needed for when libavcodec VDA supports gets a
new iteration of its API.
Like with the previous commit, this is probably not needed, but it's
unclear whether that really is the case. Most likely, it used to be
needed by some demuxer, and now the only demuxer left that could
_possibly_ trigger this is demux_mkv.c.
Note that mjpeg is the only decoder that reads the extra_huff option,
and nothing in libavformat actually sets the option. So maybe it's
fundamentally not needed anymore.
This case can't happen with the normal realvideo codepath in
demux_mkv.c, because the code would errors out if the extradata is too
small, and everything would be broken anyway in the case the vd_lavc.c
condition is actually triggered.
It still might happen with VfW-muxed realvideo in Matroska, though.
Basically, I'm hoping this doesn't matter anyway, and that the vd_lavc.c
code was for other old demuxers, like demux_avi or demux_rm. Following
the commit history, it's not really clear for what demuxer this code
was added.
Set the flag CODEC_FLAG_OUTPUT_CORRUPT by default. Note that there is
also CODEC_FLAG2_SHOW_ALL, which is older, but this seems to be ffmpeg
only.
Note that whether you want this enabled depends on the user. Some might
prefer that only good frames are output, while others want the decoder
to try as hard as possible to output _anything_. Since mplayer/mpv is
rather the kind of player that tries hard instead of being "clever", set
the new default to override libavcodec's default.
A nice way to test this is switching video tracks. Since mpv doesn't
wait for the next key frame, it'll start feeding the decoder with a
packet from the middle of the stream.
This ended up a little bit messy. In order to get a mp_log everywhere,
mostly make use of the fact that va_surface already references global
state anyway.
In my opinion, config.h inclusions should be kept to a minimum. MPlayer
code really liked including config.h everywhere, though, even in often
used header files. Try to reduce this.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
This code tried to pass a still monotonic (even if not strictly
monotonic) PTS to the player, but as a result it remained stuck on
the PTS before a reset (since the PTS was lower).
Until now, the player didn't care to drain frames on video reconfig.
Instead, the VO was reconfigured (i.e. resized) before the queued frames
finished displaying. This can for example be observed by passing
multiple images with different size as mf:// filename. Then the window
would resize one frame before image with the new size is displayed. With
--vo=vdpau, the effect is worse, because this VO queues more than 1
frame internally.
Fix this by explicitly draining buffered frames before video reconfig.
Raise the display time of the last frame. Otherwise, the last frame
would be shown for a very short time only. This usually doesn't matter,
but helps when playing image files. This is a byproduct of frame
draining, because normally, video timing is based on the frames queued
to the VO, and we can't do that with frames of different size or format.
So we pretend that the frame before the change is the last frame in
order to time it. This code is incorrect though: it tries to use the
framerate, which often doesn't make sense. But it's good enough to test
this code with mf://.
This should help fixing some issues (like not draining video frames
correctly on reinit), as well as decoupling the decoder, filter chain,
and VO code.
I also wanted to make the hardware video decoding fallback work properly
if software-only video filters are inserted. This currently has the
issue that the fallback is too violent, and throws away a bunch of
demuxer packets needed to restart software decoding properly. But
keeping "backup" packets turned out as too hacky, so I'm not doing this,
at least not yet.
This adds vf_chain, which unlike vf_instance refers to the filter chain
as a whole. This makes the filter API less awkward, and will allow
handling format negotiation better.
The --flip option flipped the image upside-down, by trying to use VO
support, or if not available, by inserting a video filter. I'm not sure
why it existed. Maybe it was important in ancient times when VfW based
decoders output an image this way (but even then, flipping an image is a
free operation by negating the stride).
One nice thing about this is that it provided a possible path for
implementing video orientation, which is a feature we should probably
support eventually. The important part is that it would be for free for
VOs that support it, and would work even with hardware decoding.
But for now get rid of it. It's useless, trivial, stands in the way, and
supporting video orientation would require solving other problems first.
If the timebase is set, it's used for converting the packet timestamps.
Otherwise, the previous method of reinterpret-casting the mpv style
double timestamps to libavcodec style int64_t timestamps is used.
Also replace the kind of awkward mp_get_av_frame_pkt_ts() function by
mp_pts_from_av(), which simply converts timestamps in a way the old
function did. (Plus it takes a timebase parameter, similar to the
addition to mp_set_av_packet().)
Note that this should not change anything yet. The code in ad_lavc.c and
vd_lavc.c passes NULL for the timebase parameters. We could set
AVCodecContext.pkt_timebase and use that if we want to give libavcodec
"proper" timestamps.
This could be important for ad_lavc.c: some codecs (opus, probably mp3
and aac too) have weird requirements about doing decoding preroll on the
container level, and thus require adjusting the audio start timestamps
in some cases. libavcodec doesn't tell us how much was skipped, so we
either get shifted timestamps (by the length of the skipped data), or we
give it proper timestamps. (Note: libavcodec interprets or changes
timestamps only if pkt_timebase is set, which by default it is not.)
This would require selecting a timebase though, so I feel uncomfortable
with the idea. At least this change paves the way, and will allow some
testing.
The harder work was done in the previous commits. After that this feature comes
out almost for free.
The only problem is I can't get the textures created with CGLTexImageIOSurface2D
to download properly, thus the code performs download using some CoreVideo APIs.
If someone knows why download of textures created with CGLTexImageIOSurface2D
doesn't work please contact me :)
PIX_FMT_* -> AV_PIX_FMT_* (except some pixdesc constants)
enum PixelFormat -> enum AVPixelFormat
Losen some version checks in certain newer pixel formats.
av_pix_fmt_descriptors -> av_pix_fmt_desc_get
This removes support for FFmpeg 1.0.x, which is even older than
Libav 9.x. Support for it probably was already broken, and its
libswresample was rejected by our build system anyway because it's
broken.
Mostly untested; it does compile with Libav 9.9.
The old ffmpeg vdpau support code uses separate vdpau pixel formats for
each decoder (pretty much because mplayer's architecture sucked), which
just gets into the way. Force the old decoder's output to IMGFMT_VDPAU,
and remove IMGFMT_IS_VDPAU() where we can remove it.
This should completely remove the differences betwene the old and new
vdpau decoder outside of the decoder.
PIX_FMT_VDA_VLD and PIX_FMT_VAAPI_VLD were never used anywhere. I'm not
sure why they were even added, and they sound like they are just for
compatibility with XvMC-style decoding, which sucks anyway.
Now that there's only a single vaapi format, remove the
IMGFMT_IS_VAAPI() macro. Also get rid of IMGFMT_IS_VDA(), which was
unused.
