Remove the explicit whitelisting of formats for refresh seeks. Instead,
check whether the packet position is somewhat reliable during demuxing.
If there are packets without position, or the packet position is not
monotonically increasing, then do not use them for refresh seeks.
This does not make sure of some requirements, such as deterministic
seeks. If that happens, mpv will mess up a bit on stream switching.
Also, add another method that uses DTS to identify packets, and prefer
it to the packet position method. Even if there's a demuxer which
randomizes packet positions, it hardly can do that with DTS. The DTS
method is not always available either, though. Some formats do not have
a DTS, and others are not always strictly monotonic (possibly due to
libavformat codec parsing and timestamp determination issues).
If an audio track is enabled during playback, then make it resume at the
exact "current position", instead of playing audio before that position.
This was already done for video.
If the packet read function returns, and EOF was detected, and a seek
was issued in the meantime, then don't use the EOF result. The seek will
be processed later, and reset the EOF state anyway.
The main effect is probably that we don't return EOF to the decoders
(which the playback core resets before issuing the seek), and that we
won't log an EOF message.
Not important, but slightly more correct.
When switching tracks, we normally have the problem that data gets lost
due to readahead buffering. (Which in turn is because we're stubborn and
instruct the demuxers to discard data on unselected streams.) The
demuxer layer has a hack that re-reads discarded buffered data if a
stream is enabled mid-stream, so track switching will seem instant.
A somewhat similar problem is when all tracks of an external files were
disabled - when enabling the first track, we have to seek to the target
position.
Handle these with the same mechanism. Pass the "current time" to the
demuxer's stream switch function, and let the demuxer figure out what to
do. The demuxer will issue a refresh seek (if possible) to update the
new stream, or will issue a "normal" seek if there was no active stream
yet.
One case that changes is when a video/audio stream is enabled on an
external file with only a subtitle stream active, and the demuxer does
not support rrefresh seeks. This is a fuzzy case, because subtitles are
sparse, and the demuxer might have skipped large amounts of data. We
used to seek (and send the subtitle decoder some subtitle packets
twice). This case is sort of obscure and insane, and the fix would be
questionable, so we simply don't care.
Should mostly fix#3392.
Always require them, instead of just for some components which have hard
requirements on correct atomic semantics. They should be widely
available, and are supported by all recent gcc and clang compiler
versions. We even have the fallbacks builtins, which should keep this
working on very old gcc releases.
In particular, w32_common.c recently added a hard requirement on
atomics, but checking this properly in the build system would have been
messy. This commit makes sure it always works.
The fallback where weak atomic semantics are always fine is in theory
rather questionable as well.
Exactly the same situation as with ao_alsa in commit 0b144eac (except
that we can detect the situation better under wasapi).
Essentially, wasapi will allow us to output any sample format, and not
just the one configured by the user in the audio system settings.
VOCTRL_CHECK_EVENTS is called on every frame. This is by design, and is
supposed to check the event queue of the windowing API.
With the decoupled GUI thread in w32_common.c this doesn't make too much
sense, and the purpose of VOCTRL_CHECK_EVENTS is really reduced to
checking event flags. Even worse, waiting on the GUI thread can
interfere with playback, since win32 sometimes blocks the event loop
(e.g. clicking the window title bar).
Change the code such that we really only query the event flags. Use
atomics to avoid having to add a new mutex. (We assume we always have
real atomics available. The build system doesn't check this properly,
and it could fall back to dummy atomics, which are not atomic.)
Should help with #3393. Doesn't help if the core happens to send a
synchronous request, most commonly via VOCTRL_SET_CURSOR_VISIBILITY or
VOCTRL_UPDATE_PLAYBACK_STATE.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
Pointless anyway. With superficial checking I couldn't find any decoder
which actually outputs this, and AO chmap negotiation would properly
ignore them anyway in most cases.
Assume you use a large value like --audio-delay=20. Then until now the
player would just have seeked normally to a "too late" position, and
played silence for about 20 seconds until audio in the correct time
range is coming again.
Change this by offsetting seeks by the right amount. This works for both
external and muxed files. If a seek isn't precise, then it works only
for external files.
This might cause issues with very large delay options. Hr-seek skipping
could take a lot of time (especially because it affects video too), the
demuxer queue could overflow, and other weird corner cases could appear.
But we just try this on best-effort basis, and if the user uses extreme
values we don't guarantee good behavior.
Prevents segfaults when a fullscreen switch is issued before fully
initializing the VO.
Doesn't change anything since the schedule_resize is only there to
resize in case the image size switches, which happens long after init.
We send a refcounted frame to the encoder, but then disrespect
refcounting rules and write to the frame data without making sure the
buffer is really writeable.
In theory this can lead to reallocation on every frame is the encoder
really keeps a reference. If we really cared, we could fix this by
providing a buffer pool. But then again, we don't care.
This is logical: the function makes sense only in situations where you
are going to write to the audio data. To make it worse,
av_buffer_realloc() also handles this situation, but only if the buffer
size changes (simply because it can't realloc memory in use), so we have
to explicitly force reallocation by unreffing the buffers first.
The problem was that when in fullscreen, switching between images did
not issue a resize event, causing none of the images to be rendered
correctly.
This fixes the problem by issuing a resize event with the screen width
and height.
This commit also moves the zeroing of the events field to when it gets
retrieved by mpv rather than randomly after a resize in the vo/backend
code.
ssurface_handle_configure()'s width and height are just hints given by
the compositor, the application's free to not respect those strictly and
to compensate for e.g. aspect ratio.
This prevents crazy scenarios in which pictures with portrait aspect
ratios have a huge black area to make them 16:9 or whatever the
compositor feels like.
With X11 it was usually left up to the window manager to prevent huge
windows from being out of range, but no Wayland compositor will do
this right now.
Hugely improves usability when using mpv as an image viewer.
Missed during the recent changes.
Also simplify error checking code and check for POLLNVAL
as well (the display fd was never actually checked to be valid).
This requires changing the pixel upload alignment because the odd sizes
might not be aligned to multiples of 4.
Anyway, the restriction has no real benefit and the sizes in between 32
and 64 might be worth using, so just drop it.
Following testing after ebe798a, this is a more than sufficient size to
cover our use case.
The old default was a drop of about 58 dB PSNR using the old code, and
this new default is about 65 dB PSNR, so it's actually an improvement
despite resulting in a smaller size.
There was no outlier whatsoever when comparing sizes around the 64
neighbourhood (with every step corresponding to a PSNR drop of about
0.07 dB), so I picked this since it's a power of two and requires no
change to the current 3dlut-size parsing logic.
I also tested smaller sizes such as 32x32x32 which performed almost as
well on colorful samples, but this results in noticeable black boost in
the dark regions, which is pretty undesirable. Therefore, we should
avoid going much further below 64x64x64.
Either way, this new size is so fast to compute that the 3dlut cache is
almost useless on my end. In fact, it might even be slower to load the
profile from the cache than to recompute it from scratch. (For caches on
a disk. For cache on a tmpfs, it makes no difference)
It seems vo_x11_check_events() was supposed to return the currently
flagged events and reset them. But there are many places where
vo_x11_check_events() is called without checking its return value. This
could lead to forgotten events.
Change the code such that they can't get lost.
This code had the exact same texture indexing bug that the original
scaler code had before the introduction of the LUT_POS macro to fix it.
We can re-use this same macro here, and the performance drop is
virtually entirely negligible. The benefit is greatly improved LUT
accuracy as the 3DLUT size decreases - in particular, the old LUT
started introducing more and more black crush the lower your LUT size is
(because the error was essentially an over-contrast bias, with a
magnitude linearly related to the lut size).
The new code improves black stability as the LUT size decreases, and
only at very low values (16 and below) do black levels start noticeably
getting affected (due to crude linearization of the nonlinear response
curve).
The default value of 3dlut-size is definitely generous enough for this
to make no difference out of the box, but it also causes no performance
drop at all on my machine so I see no harm in improving the logic.
Furthermore, this means we could easily decrease the default 3dlut size
in a future commit, perhaps even down to 64x64x64 as a default. (But
more testing is warranted here)
The FFmpeg API is incredibly weird and inconsistent about this. This is
also a FFmpeg-only issue and nothing like this is in Libav - which
doesn't really show FFmpeg in a very positive light.
(To make it even worse: this is a full-blown Libav API incompatibility,
even though this crap was added for Libav ABI-compatibility. It's
absurd.)
Quoting the FFmpeg header for the AVFrame.channels field:
/**
* number of audio channels, only used for audio.
* Code outside libavutil should access this field using:
* av_frame_get_channels(frame)
* - encoding: unused
* - decoding: Read by user.
*/
int channels;
It says "should" not must, and it doesn't even mention
av_frame_set_channels(). It's also in the section for public fields (not
below a marker that indicates private fields in a public struct, like
it's done e.g. in AVCodecContext).
But not using the accessor will cause silent failures on ABI changes.
The failure that happened due to this code didn't even make it apparent
what was wrong. So just use the idiotic accessor.
Also harmonize the FFmpeg-cursing in the code. (It's fully justified.)
Fixes#3295.
Note that mpv will still check the exact library version numbers, and
reject mismatches - to protect itself from such issues in the future.
Otherwise it behaves dumb. (Although you could argue it shouldn't try to
guess whether speed changes work, but instead simply disable DS if they
don't work.)
It used not to work - but now it apparently does. Not sure when that got
fixed in FFmpeg, but there's no longer a reason to keep this hack.
This also gets rid of the check for the read_seek2 field, which is not
part of the public API.
Both backends have code to close each FD of their wakeup_pipe array.
This array is default-initialized with 0, which means if the backends
exit before the wakeup pipe is created (e.g. when probing), they would
close FD 0.
Initialize the FDs with -1. Then we call close(-1) in these situations,
which is perfectly allowed and has no bad consequences.
This fits natively into the vo/backend and allows to simplify the
polling code.
One new change is the fact that surface_handle_enter flags VO_EVENT_WIN_STATE
and VO_EVENT_RESIZE instead of only VO_EVENT_WIN_STATE. Before this, the code
hackily relied on the timeout and the loop in the wait_frame function to track
and set the scaling factor. Instead, this triggers mpv to run a schedule_resize
and adjust the new VO output dimensions immediately. This is also more accurate
since surface_handle_enter() gets called when a surface is created, moved and
resized, which is exactly what the rest of the player might be interested in.
