Enable ASS/SSA rendering through libass in mencoder. This duplicates a
bit of code (to parse font attachments, for example). Additionally, add
a filter "fixpts" that generates PTS, simulating fixed fps. PTS
generated by this filter are then used for subtitle timing.
Original patch by Nicolas George. (nicolas.george normalesup.org)
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30849 b3059339-0415-0410-9bf9-f77b7e298cf2
screen borders with -geometry.
Based on patch by Melchior FRANZ [melchior franz gmail com].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30822 b3059339-0415-0410-9bf9-f77b7e298cf2
Add -vo vdpau suboptions "queuetime_windowed" and "queuetime_fs" to
specify the maximum number of milliseconds how far into the future a
frame flip can be queued using the VDPAU presentation queue
functionality. The intended main use of these options is to allow
disabling use of the queuing feature on systems where using it causes
choppiness in other graphics behavior (this is an NVIDIA driver issue;
the video itself isn't affected).
libass doesn't support fontconfig < 2.4.2 so fallbacks for these
ancient versions aren't needed anymore. Also update the man page
(English, German) to reflect the change. Additionally note that
-embeddedfonts controls the use of ASS script embedded fonts too.
-embeddedfonts is now always enabled by default. Fonts are never
extracted into a directory anymore but passed to libass via memory.
Based on a patch by Tim Wojtulewicz (timwoj at ieee dot org).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30043 b3059339-0415-0410-9bf9-f77b7e298cf2
Add code to intelligently choose an appropriate Matroska edition when
there are several. Will choose, in descending order of preference: the
edition chosen by the user through the option "-edition <edition id>"
if it exists, the first edition with EditionFlagDefault set to 1 if
there is one, or the first edition.
Add a mode where libavcodec's reordered_opaque feature is used to
associate container packet timestamps with decoded frames. This should
improve behavior at least for MPEG files with interlaced h264; the
previous code does not cope well with the libavformat demuxer
producing two field packets with separate timestamps but the
libavcodec h264 decoder only producing a single output frame for those
two packets (so half the timestamps have no associated output frame).
The current libavformat mpeg demuxer seems to finally work with
interlaced h264 files and produce valid timestamps which are useful
with a mode like this.
By default MPlayer now selects between this new mode and the old one
automatically based on the number of timestamp problems they cause; by
default the new mode is used if both seem to work. The new option
-pts-association-mode can be used to force a particular mode. If
correct-pts mode is disabled this has no effect on timing.
Also remove the "EXPERIMENTAL" marker from the manpage description of
-correct-pts.
By default (without -nokeepaspect) MPlayer tries to maintain video
aspect ratio by using window manager hints to keep output window
aspect when resizing. Before this commit it would however scale the
video to completely fill the window even if the window manager did not
respect those hints. Change the behavior to add black bars like in
fullscreen mode instead in this case.
Part of the code is currently under #ifdef to allow compilation with
older VDPAU library versions; that can be removed later.
Partially based on a patch by Carl Eugen Hoyos.
Add a property to select YUV colorspace. Currently implemented only in
vo_vdpau and vo_xv. Allows switching between BT.601, BT.709 and
SMPTE-240M (vdpau only).
The xv support uses the "XV_ITURBT_709" attribute. At least my NVIDIA
card supports that; I don't know whether other xv implementations do.
Bind the colorspace switch to the 'c' key by default. 'c' is currently
used by vo_sdl for some fullscreen mode change thing, but at the moment
that does not conflict and if it will in the future then vo_sdl can
change.
VDPAU part based on a patch from Lauri Mylläri <lauri.myllari@gmail.com>
Main things added are custom frame dropping for VDPAU to work around
the display FPS limit, frame timing adjustment to avoid jitter when
video frame times keep falling near vsyncs, and use of VDPAU's timing
feature to keep one future frame queued in advance.
NVIDIA's VDPAU implementation refuses to change the displayed frame
more than once per vsync. This set a limit on how much video could be
sped up, and caused problems for nearly all videos on low-FPS video
projectors (playing 24 FPS video on a 24 FPS projector would not work
reliably as MPlayer may need to slightly speed up the video for AV
sync). This commit adds a framedrop mechanism that drops some frames
so that no more than one is sent for display per vsync. The code
tries to select the dropped frames smartly, selecting the best one to
show for each vsync. Because of the timing features needed the drop
functionality currently does not work if the correct-pts option is
disabled.
The code also adjusts frame timing slightly to avoid jitter. If you
for example play 24 FPS video content on a 72 FPS display then
normally a frame would be shown for 3 vsyncs, but if the frame times
happen to fall near vsyncs and change between just before and just
after then there could be frames alternating between 2 and 4
vsyncs. The code changes frame timing by up to one quarter vsync
interval to avoid this.
The above functionality depends on having reliable vsync timing
information available. The display refresh rate is not directly
provided by the VDPAU API. The current code uses information from the
XF86VidMode extension if available; I'm not sure how common cases
where that is inaccurate are. The refresh rate can be specified
manually if necessary.
After the changes in this commit MPlayer now always tries to keep one
frame queued for future display using VDPAU's internal timing
mechanism (however no more than 50 ms to the future). This should make
video playback somewhat more robust against timing inaccuracies caused
by system load.
Patch by Francesco Lavra [francescolavra interfree it] with modifications by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29875 b3059339-0415-0410-9bf9-f77b7e298cf2
In a list of enabled fstypes, "none" now clears the list rather than
disabling all fstypes and interrupting the parser. To enable only one
(or more) fstypes, list the types to enable after "none".
For example:
"-fstype none" is the same as before: all disabled
"-fstype none,fullscreen" enables only the fullscreen type
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29805 b3059339-0415-0410-9bf9-f77b7e298cf2
Allows to use ITU-R BT.709 instead of the default ITU-R BT.601.
Patch by Lauri Mylläri, lauri D myllari gmail
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29769 b3059339-0415-0410-9bf9-f77b7e298cf2
As part of merging subtitle-in-terminal changes make
update_subtitles() only clear existing subtitles if called with the
reset argument, and not try to set new ones. Later calls should set
the needed new subtitles, and this change avoids some problems with
trying to set subtitles when mp_property_sub() in command.c gets
called from initialization code before full initialization.
all other filters that should apply to it
(fix PEBCAK as seen on #mplayer)
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29752 b3059339-0415-0410-9bf9-f77b7e298cf2
FreeType's native hinter causes rendering errors with many fonts,
especially with broken fonts that unfortunately tend to be used a
lot with SSA/ASS subtitles. Use the light autohinter for unscaled
OSD by default to avoid these problems.
The GUI is badly designed and too closely coupled to the internal
details of other code. The GUI code is in bad shape and unmaintained
for years. There is no indication that anyone would maintain it in the
future either. Even if someone did volunteer to implement a better
integrated GUI having the current code in the tree probably wouldn't
help much. So get rid of it.
Now filter parameters are highly controllable, virtually all audio
formats are supported, and new profiles are available.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29244 b3059339-0415-0410-9bf9-f77b7e298cf2
Lack of -fixed-vo causes the output window to be recreated not only
when changing files but also when switching the video stream, and that
happens when moving from one ordered chapter source to another. Having
the window disappear and reappear (likely at another location if it
was ever moved) is just too annoying.
Disable by default the code that forcefully moved the video output
window to the middle of the screen whenever it was reconfigured or
created. That behavior was really annoying when switching video
streams within a file, and overriding the window manager like that is
not good default behavior for the initial creation of a window either.
Add a new option "-force-window-position" that can be used to restore
the old behavior.
Convert vo_x11_border (used in vo_gl/gl2 though the vo_gl_border
macro) to use a wrapper macro in old-style VOs which do not provide a
VO object argument. Before this function had an explicit global_vo
argument in vo_gl/gl2. New vo_vdpau uses it too so use the same
mechanism as most other functions.
patch by Adrian Stutz %adrian A sttz P ch%
Original thread:
date Fri, Jan 9, 2009 at 4:03 PM
subject [MPlayer-dev-eng] [PATCH] vo_macosx: fix device_id option after r28165
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@28341 b3059339-0415-0410-9bf9-f77b7e298cf2
The libdvdread4 and libdvdnav directories, which are externals in the
svn repository, are at least for now not included in any form. I added
configure checks to automatically disable internal libdvdread and
libdvdnav if the corresponding directories are not present; if they're
added manually then things work the same as in svn.
corey
greg
reimar
ptt
Uoti Urpala
cehoyos
komh
diego
Grigori Goronzy
Gabrov
compn
adrian
Daniel Dawson
tack
attila
Anton Khirnov
lorenm
bircoph
eugeni
gpoirier