Add code to enforce matching pts with video when (re)starting the
audio stream, by either cutting away the first samples or inserting
silence at the beginning. New option -noinitial-audio-sync can be used
to disable this and return to old behavior.
If the option is enabled and all audio has been buffered to the AO,
then the player will move to the next file without waiting for the
buffered audio to drain, while leaving the AO initialized. If the
playback of the next file starts quickly enough (before the AO buffer
empties) then it should continue writing audio to the same AO with no
gap in between.
Further review very welcome, but it is time (and good enough) to add this.
Patch by Gordon Schmidt [gordon.schmidt s2000.tu-chemnitz de] with
changes by Endre Kollár [taxy443 gmail com].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32527 b3059339-0415-0410-9bf9-f77b7e298cf2
If a specified key is pressed during playback, the current stream is
captured to a file, similar to what -dumpstream achieves.
original patch by Pásztor Szilárd, don tricon hu
Taken from the following svn commits, but with several fixes and
modifications (one obvious user-visible difference is that the default
key binding is 'C', not 'c'):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32524 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32529 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32530 b3059339-0415-0410-9bf9-f77b7e298cf2
Printing maximum volume only works when prefering float format.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31762 b3059339-0415-0410-9bf9-f77b7e298cf2
Add output device selection and correctly set the default device if
it's selected.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31715 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix cosmetics after r31715.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31716 b3059339-0415-0410-9bf9-f77b7e298cf2
Independent tests indicate that GLX_STEREO is working fine on
supported hardware.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31647 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31648 b3059339-0415-0410-9bf9-f77b7e298cf2
Support for unencrypted Blu-ray playback through libbluray.
Use it through: mplayer br:////path/to/disc
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31631 b3059339-0415-0410-9bf9-f77b7e298cf2
Make clear that -frames 0 surpresses all _video_ output and not the
text output.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31552 b3059339-0415-0410-9bf9-f77b7e298cf2
Its functionality has been superseeded by sws by quite some time, and
the "swap" functionality is now provided by vf_format.
see http://comments.gmane.org/gmane.comp.video.mplayer.devel/55804 for
a full discussion.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31350 b3059339-0415-0410-9bf9-f77b7e298cf2
Patch by Malte Särner, malte D sarner A multiq se
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31347 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix compilation with nemesi and live555.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31348 b3059339-0415-0410-9bf9-f77b7e298cf2
be able to handle this just as well (or better) including interlaced.
If not, this needs to be fixed there instead of duplicating code.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31320 b3059339-0415-0410-9bf9-f77b7e298cf2
-a52drc range extension was already done earlier (and the svn commit
is buggy for ad_liba52). However keep the man page change (this is the
only part not skipped).
We don't want to use lavf for Matroska demuxing; it's questionable
whether that's a good idea even in svn, and the internal demuxer here
is definitely a better choice.
Make the number of output surfaces allocated by vo_vdpau configurable
and allow queuing multiple future frames with the VDPAU frame timing
functionality. There are two known issues that could be polished in
the future for particularly long queue time cases. First, toplevel
code should possibly wait for the queued changes to finish displaying
in some situations like switching files. Second, the VO can block
waiting for a surface to become available, and in the worst case this
wait can be almost as long as the maximum queuing time (potentially
causing audio underruns). However those issues are not high priority.
Add -vo vdpau suboption "studio" to produce output in RGB range
16-235. Man page description mostly taken from a patch by Lauri
Mylläri (but not code). Also slightly tweak the description of two
other suboptions on the man page.
If --enable-translation was specified to configure, build and install
.mo files for the selected message language(s). The languages enabled
can be chosen with the --language-msg option; by default all available
ones will be installed. The .po source files for available languages
are seached under the po/ subdirectory; at the moment that
subdirectory is not included in the sources so no languages will be
enabled unless you add the actual translations before running
configure.
The .mo files are created in the locale/ subdirectory when compiling.
By default MPlayer will only look for them in the installed location,
so the newly compiled .mo files will not be found if you run MPlayer
without installing. You can set the MPLAYER_LOCALEDIR environment
variable to point to the locale/ directory to test the translations
without installing.
It is now possible to specify alternative codec paths on the comand line.
Furthermore, XANIM_MOD_DIR was never properly documented.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30936 b3059339-0415-0410-9bf9-f77b7e298cf2
It allows to search binary codecs in non-standard directories.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30897 b3059339-0415-0410-9bf9-f77b7e298cf2
Enable ASS/SSA rendering through libass in mencoder. This duplicates a
bit of code (to parse font attachments, for example). Additionally, add
a filter "fixpts" that generates PTS, simulating fixed fps. PTS
generated by this filter are then used for subtitle timing.
Original patch by Nicolas George. (nicolas.george normalesup.org)
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30849 b3059339-0415-0410-9bf9-f77b7e298cf2
screen borders with -geometry.
Based on patch by Melchior FRANZ [melchior franz gmail com].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30822 b3059339-0415-0410-9bf9-f77b7e298cf2
Add -vo vdpau suboptions "queuetime_windowed" and "queuetime_fs" to
specify the maximum number of milliseconds how far into the future a
frame flip can be queued using the VDPAU presentation queue
functionality. The intended main use of these options is to allow
disabling use of the queuing feature on systems where using it causes
choppiness in other graphics behavior (this is an NVIDIA driver issue;
the video itself isn't affected).
libass doesn't support fontconfig < 2.4.2 so fallbacks for these
ancient versions aren't needed anymore. Also update the man page
(English, German) to reflect the change. Additionally note that
-embeddedfonts controls the use of ASS script embedded fonts too.
-embeddedfonts is now always enabled by default. Fonts are never
extracted into a directory anymore but passed to libass via memory.
Based on a patch by Tim Wojtulewicz (timwoj at ieee dot org).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30043 b3059339-0415-0410-9bf9-f77b7e298cf2
Add code to intelligently choose an appropriate Matroska edition when
there are several. Will choose, in descending order of preference: the
edition chosen by the user through the option "-edition <edition id>"
if it exists, the first edition with EditionFlagDefault set to 1 if
there is one, or the first edition.
Add a mode where libavcodec's reordered_opaque feature is used to
associate container packet timestamps with decoded frames. This should
improve behavior at least for MPEG files with interlaced h264; the
previous code does not cope well with the libavformat demuxer
producing two field packets with separate timestamps but the
libavcodec h264 decoder only producing a single output frame for those
two packets (so half the timestamps have no associated output frame).
The current libavformat mpeg demuxer seems to finally work with
interlaced h264 files and produce valid timestamps which are useful
with a mode like this.
By default MPlayer now selects between this new mode and the old one
automatically based on the number of timestamp problems they cause; by
default the new mode is used if both seem to work. The new option
-pts-association-mode can be used to force a particular mode. If
correct-pts mode is disabled this has no effect on timing.
Also remove the "EXPERIMENTAL" marker from the manpage description of
-correct-pts.
By default (without -nokeepaspect) MPlayer tries to maintain video
aspect ratio by using window manager hints to keep output window
aspect when resizing. Before this commit it would however scale the
video to completely fill the window even if the window manager did not
respect those hints. Change the behavior to add black bars like in
fullscreen mode instead in this case.
Part of the code is currently under #ifdef to allow compilation with
older VDPAU library versions; that can be removed later.
Partially based on a patch by Carl Eugen Hoyos.
Add a property to select YUV colorspace. Currently implemented only in
vo_vdpau and vo_xv. Allows switching between BT.601, BT.709 and
SMPTE-240M (vdpau only).
The xv support uses the "XV_ITURBT_709" attribute. At least my NVIDIA
card supports that; I don't know whether other xv implementations do.
Bind the colorspace switch to the 'c' key by default. 'c' is currently
used by vo_sdl for some fullscreen mode change thing, but at the moment
that does not conflict and if it will in the future then vo_sdl can
change.
VDPAU part based on a patch from Lauri Mylläri <lauri.myllari@gmail.com>
Main things added are custom frame dropping for VDPAU to work around
the display FPS limit, frame timing adjustment to avoid jitter when
video frame times keep falling near vsyncs, and use of VDPAU's timing
feature to keep one future frame queued in advance.
NVIDIA's VDPAU implementation refuses to change the displayed frame
more than once per vsync. This set a limit on how much video could be
sped up, and caused problems for nearly all videos on low-FPS video
projectors (playing 24 FPS video on a 24 FPS projector would not work
reliably as MPlayer may need to slightly speed up the video for AV
sync). This commit adds a framedrop mechanism that drops some frames
so that no more than one is sent for display per vsync. The code
tries to select the dropped frames smartly, selecting the best one to
show for each vsync. Because of the timing features needed the drop
functionality currently does not work if the correct-pts option is
disabled.
The code also adjusts frame timing slightly to avoid jitter. If you
for example play 24 FPS video content on a 72 FPS display then
normally a frame would be shown for 3 vsyncs, but if the frame times
happen to fall near vsyncs and change between just before and just
after then there could be frames alternating between 2 and 4
vsyncs. The code changes frame timing by up to one quarter vsync
interval to avoid this.
The above functionality depends on having reliable vsync timing
information available. The display refresh rate is not directly
provided by the VDPAU API. The current code uses information from the
XF86VidMode extension if available; I'm not sure how common cases
where that is inaccurate are. The refresh rate can be specified
manually if necessary.
After the changes in this commit MPlayer now always tries to keep one
frame queued for future display using VDPAU's internal timing
mechanism (however no more than 50 ms to the future). This should make
video playback somewhat more robust against timing inaccuracies caused
by system load.
Uoti Urpala
reimar
attila
diego
adrian
cehoyos
ben
siretart
Gabrov
komh
corey
greg
ptt
Grigori Goronzy
compn
Daniel Dawson