Now vo_gl3 should work with standard OpenGL 2.1, as long as the
GL_ARB_texture_rg extension is available. Optional features, which
require features that are always in OpenGL 3.0, but are available
as extensions only in OpenGL 2.1, are automatically disabled.
The force-gl2 suboption, which was an unreliable hack to run vo_gl3
in an OpenGL 2.1 context, is removed.
Significant changes are done to the extension loader to make it easier
to identify optional OpenGL features.
Context creation is a bit changed to simplify the code and to handle
the fallback better if OpenGL 3 context creation fails, and creating
an OpenGL legacy context is attempted.
Based on the initial work by Rudolf Polzer <divverent@xonotic.org>,
which included making the shader GLSL 1.20 compatible, and more.
Most of these have very limited actual use, or are even entirely
useless. They only serve to bloat the codebase and to make life harder.
Drowning users in tons of barely useful filters isn't exactly helpful
either. Some of these filters were redundant or marked as obsolete.
The dlopen and lua (to be added soon) video filters provide ways to add
custom filters.
Detailed listing for each filter with reasons (with contributions from
divVerent and lachs0r):
1bpp:
Replaced by "scale".
2xsai:
Pixel art scaling algorithm, useless with lossy video.
blackframe:
Not very useful. Apparently one use is combining it with scripts,
that pass the
bmovl:
Weirdly complex and insane (using FIFO commands), questionable use.
cropdetect:
Only sort-of useful when used with scripts, and then it will be
very fragile.
It's probably better to use the dlopen rectangle filter, or to
implement the common use-case in a better way.
decimate:
Not needed/useful with modern video codecs, is an
encoding-only filter.
denoise3d:
"hqdn3d" is better.
detc:
Some of the worse deteleciners.
dint:
Useless, actually crashes. (On an assert in vf.c that is disabled
by default in mplayer-svn.)
dvbscale:
Not even practical, and the same effect can be achieved through
other means.
eq:
Worse/older version of eq2.
field:
Limited use, available as dlopen filter.
fil:
Quoting the manpage:
This filter is very similar to the il filter but much faster,
the main disadvantage is that it does not always work.
Especially if combined with other filters it may produce
randomly messed up images, so be happy if it works but do not
complain if it does not for your combination of filters.
filmdint:
Kind of redundant with pullup, and slightly worse.
fixpts:
Never useful. (Most if not all filters have been fixed for PTS.)
framestep:
Questionable use. For things like creating thumbnails, ffmpeg or
--sstep should be used.
geq:
Limited use, will be redundant with the "lua" filter.
halfpack:
Useless, probably redundant with "scale".
harddup:
Useless.
hue:
Most VOs support this.
il:
Useless.
ivtc:
Another of the worse deteleciners.
kerndeint:
A bad deinterlacer.
lavc:
For DVB output devices. We removed that support.
lavcdeint:
A bad deinterlacer, was already deprecated.
Still available as --vf=pp=fd.
mcdeint:
A broken deinterlacer that uses lavc internals.
ow:
Very slow, barely any quality benefit over "hqdn3d".
palette:
Done by "scale".
perspective:
Files with incorrect perspective are extremely rare. About the
only real-world use for this is keystone correction, which is
usually done in hardware by the projector or by graphics
drivers/compositors.
pp7:
Another useless postprocessing filter with bad and complicated code.
Use libpostprocess with "pp" instead.
qp:
Useless.
remove-logo:
Redundant with delogo, which is better and more practical.
rgbtest:
Useless.
sab, smartblur, boxblur:
Blur filters, redundant to "unsharp".
softskip:
Does nothing.
spp, fspp, uspp:
Useless postprocessing filters. "spp" needs ffmpeg internals.
"fspp" is the optimized version of the "spp" filter (???), while
"uspp" is the slow version (????).
Use libpostprocess with "pp" instead.
telecine:
Evil and useless. Available as dlopen filter for testing
purposes.
test:
Useless.
tfields:
Useless, probably.
tile:
Questionable use. Available as dlopen filter.
tinterlace:
Evil and useless.
yuvcsp:
Probably useless.
yvu9:
Redundant with "scale".
Also remove the following left-over files: vd_null.c, vqf.h
Apparently, libav doesn't have the change for the new way to create a
libavformat context merged yet. So, we can't use that...
Rather, this commit fixes format specific avoptions another way.
On the downside, invalid format options are now detected very late, and
any attempt to set an option value to +something or -something will
append to the previously set option value (this logic can no longer be
specific to options of bitflag type, as finding out the option type is
what we simply cannot do with this interface).
This allows to define which stream is to be used as first output stream.
This is useful because dvdauthor refuses VOB files where the audio
stream is the first stream.
This removes the alternative values like "off", "0", "false" etc., and
also the non-English versions of these.
This is done for general consistency. It's better to have a single way
of doing things when multiple ways don't add singificant value.
Also update some choices for consistency.
--softvol is enabled by default. For most audio outputs, this is a good
thing, as they have either their own (bad) soft volume implementation,
or control the system mixer. With ao_pulse, the situation is a bit
different: it supports per-application volume (i.e. volume control is
not really global). More importantly, ao_pulse uses a rather large audio
buffer, and changing the volume with mplayer's volume filter has a large
delay. With the native ao_pulse volume control, it's instant, because
PulseAudio's audio filtering happens at a later stage in its processing
pipeline (inaccessible for mplayer).
This means native volume control should really be allowed for ao_pulse,
while it's the reverse for other audio outputs. Make --softvol a choice
option, and add a new "auto" choice. This is default and will use PA's
volume control with ao_pulse, and mplayer's volume filter otherwise
(i.e. the old softvol behavior).
The --vid, --aid, --sid options now accept the values 'off' and 'auto',
instead of having the user deal with the numeric values -2 and -1. The
numeric values are not allowed anymore.
Remove the --audio option. It was probably meant as compensation option
for --no-audio. There are no such options for sub/video, and it was not
documented, so just remove it. The replacement is "--aid=auto".
Also do some updates to the manpage.
The --loop option takes slightly different parameters now. --loop=0
used to mean looping forever. Now it means looping is disabled (this is
more logical: 2 means playing 2 more times, 1 means playing 1 more time,
and 0 should mean playing not again).
Now --loop=inf must be used to enable looping forever.
Extend choice types to allow an optional range of integers as values.
If CONF_RANGE is added to the flags of a m_option_type_choice option,
m_option.min/max specify a range of allowed integer values. This can be
used to remove "special" values from make integer range options. These
special values are unintuitive, and sometimes expose mplayer internals
to the user. The (internal) choice values can be freely mixed with the
specified integer value range. If there are overlaps, the choice values
are preferred for conversion to/from strings.
Also make sure the extension to choice options works with properties.
Add the ability to step choice properties downwards, instead of just
upwards.
It can't be re-implemented, because this isn't supported by libass. The
-subalign option and the associated sub-align slave property did
nothing. Remove them.
The rawaudio demuxer had a rather hard to use way to set the audio
format with the --rawaudio=format=value option. The user had to pass a
numeric value, which then was set as wFormatTag member in the
WAVEFORMATEX header.
Make it use the mplayer audio format (the same as --af=format=value).
Add a new internal pseudo audio codec tag, which is hopefully unused,
which makes ad_pcm use the value in wFormatTag as internal mplayer
audio format.
Playing non-PCM formats is disabled. (At least AC3 can be played
directly.)
af_format.h declares some symbols which are defined in format.c. The
fact that af_format.c is a completely unrelated file is rather
confusing. Having the header and implementation file use the same base
name is more uniform. (af_format.c is the audio conversion filter, while
af_format.h and format.c are about audio formats and their properties.)
Also fix all source files which include this file.
While being able to play videos on a framebuffer device would be nice,
I didn't need it, and couldn't even test it (buggy nvidia binary
drivers that disable framebuffers, buggy DirectFB that crashes when
using the X11 backend). It's just dead weight, get rid of it.
vo_directx was very horrible, and by today it's mostly useless. I didn't
remove it, because there was that-guy who told me in amazement how
awesome mplayer was, because it was the only video player fast enough
for fast playback on his system when using vo_directx. Sorry, that-guy.
When the internal mplayer MPEG demuxer was removed (commit 1fde09db),
the default demuxer when using dvdnav was set to libavformat. Now it
turns out that this doesn't work with libavformat. It will terminate
playback right after the audio runs out (instead of looping it like the
video, or whatever it's supposed to do). I'm not sure what exactly the
problem is, but since 1. even mplayer-svn can't handle DVD menus
directly (missing highlights), 2. DVD menus are essentially worthless,
and 3. I don't directly watch DVDs, don't bother with it and remove it.
For basic playback, there's still libdvdread support.
Also, use pkg-config for libdvdread, and drop support for in-tree
libdvdread. Remove support for in-tree libdvdcss as well.
It's not clear why this video filter supported OSD rendering.
The manpage says:
"Can be used for placing subtitles/OSD in the resulting black bands."
But every single VO already does this if vf_expand adds black borders.
This feature is 100% pointless.
Rename -slave to -slave-broken to prevent slave mode applications from
working. Do this to prevent horrible user experiences, in case someone
should attempt to try this version of mplayer with smplayer and others.
This also makes it clear that we don't intend to keep slave mode
compatibility, because the slave mode protocol is horrible and bad.
See the changes in options.rst for further reasons and comments.
Since slave mode is not planned to be kept, this VO is useless and I'm
removing it.
This VO was useful for OSX GUIs. Since in cocoa you can't embed views in
windows from other processes, this VO was writing to a sharedbuffer with
mmap. The OSX GUIs would then read from the buffer and render the image
with an external renderer.
If in the future we will want to support GUIs we will need to reasearch the
IOSurface framework. This allows to share kernel managed image data
across processes and integrates well with OpenGL.
The documentation is mostly taken from the help text embedded in the
code of each output driver.
vo_v4l2 and ao_v4l2 have been removed.
Minor modifications to vo_xv, vo_directx and vo_gl.
Although slightly less precise, this sounds less clunky.
This change also causes the --screenshot-filetype option to be renamed
to --screenshot-format.
This provides the total number of titles (aka tracks) of CDs / VCDs / DVDs.
Additionally, add a titles property to the get_property slave command.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34474 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: ib
Teletext requires special OSD support. Because I can't even test
teletext, I can't restore support for it. Since teletext can be
considered ancient and obscure, and since it doesn't make sense to keep
the remaining teletext code without being able to use it, I'm removing
it.
While this was an interesting idea, it wasn't actually useful.
Basically it dumped the raw data (as requested by the demuxer) into a
file. The result is only useful if the file format was raw or maybe
some MPEG packet stream, but not with most modern file formats.
This was disabled by default, and could be enabled with -dr. It was
disabled by default because it was buggy: there were issues with OSD
corruption.
It wasn't entirely sane for OpenGL based VOs either. OpenGL can chose
to drop mapped pixel buffer objects, requiring the application to map
and fill the buffer again. But there was no mechanism in mplayer to
fill the lost buffer again. (It seems this rarely happened in practice,
though.)
On the other side, users liked the --dr flag, because it promised them
more speed. I'm not sure if it actually helped with speed, but it's
unlikely it had any real advantages on modern systems.
In order to evade the --dr cargo culting in mplayer config files, it's
best to get rid of it.
stream_cue, which provided the cue:// protocol handler, was extremely
hacky and didn't even manage to play some samples I tried.
Remove it, because it's plain unneeded. There is much better support
for .cue files elsewhere:
- libcdio can play pairs of .cue/.bin files:
mplayer cdda:// --cdrom-device=your_cue_file.cue
Note that if the .cue file is not accompanied by a .cue file, but
an encoded file for example, this most likely won't work.
- mplayer can play .cue files directly:
mplayer your_cue_file.cue
This works, even if the .cue file comes with encoded files that are
not .bin . Note that if you play .bin files, mplayer will assume a
specific raw audio format. If the format doesn't match, mplayer will
play noise and destroy your speakers. Note that format mismatches are
extremely common, because the endianness seems to be essentially
random. (libcdio uses a clever algorithm to detect the endian, and
doesn't have this problem.)
To quote the manpage: "This filter is untested, maybe even unusable."
And it seems they were never touched again after it was added many
years ago (except for cosmetic changes). Just get rid of them.
About a year ago, ubitux converted most of the old manpage from the
hard to maintain nroff format to reStructuredText. This was not merged
back into the master repository immediately. The argument was that the
new manpage still required work to be done. However, progress was very
slow. Even worse: the old manpage wasn't updated, because it was
scheduled for deletion, and updating it would have meant useless work.
Now the situation is that the new manpage still isn't finished, and the
old manpage is grossly out of sync with the player. This is not helpful
for users. Additionally, keeping the new manpage in a separate branch,
while the normal development repository for code had the old manpage,
was very inconvenient, because you couldn't just update the
documentation in the same commit as the code.
Even though the new manpage isn't finished yet, merging it now seems to
be the best course of action. Squash-merge the manpage development
branch [1], revision e89f5dd3f2, which branches from the mplayer2
master branch after revision 159102e0cb.
Committers:
* Clément Bœsch <ubitux@gmail.com> (Initial conversion to RST.)
* Uoti Urpala <uau@mplayer2.org> (Many updates.)
* Myself (Minor edits.)
Most text of the manpage has been directly taken from the old manpage,
because this is a conversion, not a complete rewrite.
[1] http://git.mplayer2.org/uau/mplayer2.git/log/?h=man
Summary:
- There is no playtree anymore. It's reduced to a simple list.
- Options are now always global. You can still have per-file options,
but these are optional and require special syntax.
- The slave command pt_step has been removed, and playlist_next
and playlist_prev added. (See etc/input.conf changes.)
This is a user visible incompatible change, and will break slave-mode
applications.
- The pt_clear slave command is renamed to playlist_clear.
- Playtree entries could have multiple files. This is not the case
anymore, and playlist entries have always exactly one entry. Whenever
something adds more than one file (like ASX playlists or dvd:// or
dvdnav:// on the command line), all files are added as separate
playlist entries.
Note that some of the changes are quite deep and violent. Expect
regressions.
The playlist parsing code in particular is of low quality. I didn't try
to improve it, and merely spent to least effort necessary to keep it
somehow working. (Especially ASX playlist handling.)
The playtree code was complicated and bloated. It was also barely used.
Most users don't even know that mplayer manages the playlist as tree,
or how to use it. The most obscure features was probably specifying a
tree on command line (with '{' and '}' to create/close tree nodes). It
filled the player code with complexity and confused users with weird
slave commands like pt_up.
Replace the playtree with a simple flat playlist. Playlist parsers that
actually return trees are changed to append all files to the playlist
pre-order.
It used to be the responsibility of the playtree code to change per-file
config options. Now this is done by the player core, and the playlist
code is free of such details.
Options are not per-file by default anymore. This was a very obscure and
complicated feature that confused even experienced users. Consider the
following command line:
mplayer file1.mkv file2.mkv --no-audio file3.mkv
This will disable the audio for file2.mkv only, because options are
per-file by default. To make the option affect all files, you're
supposed to put it before the first file.
This is bad, because normally you don't need per-file options. They are
very rarely needed, and the only reasonable use cases I can imagine are
use of the encode backend (mplayer encode branch), or for debugging. The
normal use case is made harder, and the feature is perceived as bug.
Even worse, correct usage is hard to explain for users.
Make all options global by default. The position of an option isn't
significant anymore (except for options that compensate each other,
consider --shuffle --no-shuffle).
One other important change is that no options are reset anymore if a
new file is started. If you change settings with slave mode commands,
they will not be changed by playing a new file. (Exceptions include
settings that are too file specific, like audio/subtitle stream
selection.)
There is still some need for per-file options. Debugging and encoding
are use cases that profit from per-file options. Per-file profiles (as
well as per-protocol and per-VO/AO options) need the implementation
related mechanisms to backup and restore options when the playback file
changes.
Simplify the save-slot stuff, which is possible because there is no
hierarchical play tree anymore. Now there's a simple backup field.
Add a way to specify per-file options on command line. Example:
mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3
will have the following options per file set:
f1.mkv, f4.mkv: -o0 -o3
f2.mkv, f3.mkv: -o0 -o3 -o1 -o2
The options --{ and --} start and end per-file options. All files inside
the { } will be affected by the options equally (similar to how global
options and multiple files are handled). When playback of a file starts,
the per-file options are set according to the command line. When
playback ends, the per-file options are restored to the values when
playback started.
The command lists the audio and subtitle tracks in the current file on the
OSD. It also marks the currently active streams.
Video streams are not shown, as files with more than one video stream are
exceedingly rare.
The command lists the chapters in the current file on the OSD. It also
marks the current chapter.
This is actually a cheap replacement for the chapter select libmenu
functionality.
While DOCS/tech/ contains lots of documentation about mplayer's
internals, most of it seems outdated, and hasn't been touched in many
years. On the other hand, there still might be useful things in there,
but it's hard to tell which parts.
Instead of deleting all it, rename the directory to "warn" potential
developers that the documentation is completely outdated.
This contained _some_ documentation, but it was all old, crappy,
barely maintained. Even if it was maintained, uau hasn't merged
back changes for years.
Conflicts:
.gitignore
bstr.c
cfg-mplayer.h
defaultopts.c
libvo/video_out.c
The conflict in bstr.c is due to uau adding a bstr_getline function in
commit 2ba8b91a97. This function already existed in this branch.
While uau's function is obviously derived from mine, it's incompatible.
His function preserves line breaks, while mine strips them. Add a
bstr_strip_linebreaks function, fix all other uses of bstr_getline, and
pick uau's implementation.
In .gitignore, change vo_gl3_shaders.h to use an absolute path
additional to resolving the merge conflict.
Delete all manpages and XML documentation in languages other than
English. The XML documentation was badly out of date. The content of
translated manpages was somewhat out of date, and manpage formatting
will change to use reStructuredText instead of raw troff format. If
updated translations are created for some languages later, I think
it's better to maintain those outside the main repository.
The player can read codec mapping (codecs.conf) from an external file
or use embedded defaults. Before, the defaults were stored in the
player binary in the form of final already-parsed data structures.
Simplify things by storing the text of the codecs.conf file instead,
and parse that at runtime the same way an external file would be
parsed.
To create the previous parsed form, the build system first compiled a
separate binary named "codec-cfg", which parsed etc/codecs.conf and
then wrote the results as a C data structure that could be compiled
into the program. The new simple conversion of codecs.conf into a C
string is handled by the new script TOOLS/file2string.py.
After removing the codec-cfg binary, HOST_CC is no longer used for
anything. Remove the --host-cc configure option and associated logic.
Also remove the codec2html and codec-cfg-test functionality. Building
those was already broken and nobody cared.
There was a broken 3-character-long "fourcc" entry in etc/codecs.conf.
This happened to be accepted before but triggered a parse error after
the changes. Remove the broken entry and make the parsing functions
explicitly test for this error.
The screenshot command normally converts the currently displayed video
frame to an image. Add support for an alternative screenshot mode
that is supposed to capture the real window contents. Such a
screenshot contains a possibly scaled version of the frame, the OSD,
and subtitles.
Add a default key binding Alt+s for taking screenshots in this mode.
This needs special VO support, and might not work with all VOs (this
commit does not yet contain an implementation for any VO, only the
infrastructure).
Something like the OSD menu functionality could be useful. However the
current implementation has several problems and would require a
relatively large amount of work to get into good shape. As far as I
know there are few users of the existing functionality. Nobody is
working on the existing code and keeping it compiling at all while
changing other code would require extra work. So delete the menu code
and some related code elsewhere that's used by nothing else.
Rewrite control of the colorspace and input/output level parameters
used in YUV-RGB conversions, replacing VO-specific suboptions with new
common options and adding configuration support to more cases.
Add new option --colormatrix which selects the colorspace the original
video is assumed to have in YUV->RGB conversions. The default
behavior changes from assuming BT.601 to colorspace autoselection
between BT.601 and BT.709 using a simple heuristic based on video
size. Add new options --colormatrix-input-range and
--colormatrix-output-range which select input YUV and output RGB range.
Disable the previously existing VO-specific colorspace and level
conversion suboptions in vo_gl and vo_vdpau. Remove the
"yuv_colorspace" property and replace it with one named "colormatrix"
and semantics matching the new option. Add new properties matching the
options for level conversion.
Colorspace selection is currently supported by vo_gl, vo_vdpau, vo_xv
and vf_scale, and all can change it at runtime (previously only
vo_vdpau and vo_xv could). vo_vdpau now uses the same conversion
matrix generation as vo_gl instead of libvdpau functionality; the main
functional difference is that the "contrast" equalizer control behaves
somewhat differently (it scales the Y component around 1/2 instead of
around 0, so that contrast 0 makes the image gray rather than black).
vo_xv does not support level conversion. vf_scale supports range
setting for input, but always outputs full-range RGB.
The value of the slave properties is the policy setting used for
conversions. This means they can be set to any value regardless of
whether the current VO supports that value or whether there currently
even is any video. Possibly separate properties could be added to
query the conversion actually used at the moment, if any.
Because the colorspace and level settings are now set with a single
VF/VO control call, the return value of that is no longer used to
signal whether all the settings are actually supported. Instead code
should set all the details it can support, and ignore the rest. The
core will use GET_YUV_COLORSPACE to check which colorspace details
have been set and which not. In other words, the return value for
SET_YUV_COLORSPACE only signals whether any kind of YUV colorspace
conversion handling exists at all, and VOs have to take care to return
the actual state with GET_YUV_COLORSPACE instead.
To be changed in later commits: add missing option documentation.
Add option --ass-vsfilter-aspect-compat and corresponding property
ass_vsfilter_aspect_compat. The setting controls whether to enable the
emulation of traditional VSFilter behavior where subtitles are
stretched if the video is anamorphic (previously always enabled for
native SSA/ASS subtitles). Enabled by default. Add 'V' as a new
default keybinding to toggle the property.
Correct suboption stereo descriptions, and reformat to be compliant
with other sections.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33788 b3059339-0415-0410-9bf9-f77b7e298cf2
Patch by Steaphan Greene [sgreene cs.binghamton.edu]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33648 b3059339-0415-0410-9bf9-f77b7e298cf2
Improve stereo3d interleaved man page description.
Patch by Steaphan Greene [sgreene cs.binghamton.edu]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33689 b3059339-0415-0410-9bf9-f77b7e298cf2
Change memcpy_pic to force it to never write to image parts between
width and stride if creating a row-interleaved format, otherwise
the second memcpy_pic might overwrite what the first wrote.
Changing the first should not be necessary but might result in
better performance.
Patch by Steaphan Greene [sgreene cs.binghamton.edu]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33690 b3059339-0415-0410-9bf9-f77b7e298cf2
NOTE: the memory for the "file" argument will be leaked; dynamic
options are not automatically freed. Not fixing that now as I might
implement more general handling later. -uau
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33488 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33498 b3059339-0415-0410-9bf9-f77b7e298cf2
Change some key names to upper case and to match the names used in
input.conf bindings. Most of them already were in this form.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33382 b3059339-0415-0410-9bf9-f77b7e298cf2
Due to libavcodec changes vo_xvmc would have needed some modifications
to keep working. However, I think there's little real demand for XvMC,
so I'll just drop XvMC support. XvMC only supported MPEG-2, making it
of very limited usefulness nowadays, plus the vo_xvmc implementation
was not high quality and never worked particularly well or reliably
anyway.
Change ao_pcm to use the new audio output driver API and clean up some
of the code. Rewrite the logic controlling how playback timing works
when using -ao pcm. Deprecate the "fast" suboption; its only effect
now is to print a warning, but it's still accepted so that specifying
it is not an error.
Before, timing with -ao pcm and video enabled had two possible
modes. In the default mode playback speed was rather arbitrary - not
realtime, but not particularly fast. -ao pcm:fast tried to play back
at maximum video playback speed - mostly succeeding, but not quite
guaranteed to work in all cases. Now the default is to play at
realtime speed. The -benchmark option can now be used to get faster
playback (same as the video-only case). In the audio-only case
playback is always maximum speed.
Instead of strictly limiting the number of total entries in the
internal fifo, make the overall buffer bigger and try to limit entries
based on how many bound commands they're expected to generate. Now
doubleclick and button down events aren't counted for that limit.
Normally the sequence down-doubleclick-up generates at most one
command, so this better matches the quantity we actually want to
limit. Also add a mechanism to clear the button combination state kept
by input.c when the fifo is full; this avoids "stuck button" problems
due to button release events being dropped.
The key combination state clearing is partially based on MPlayer 1
changes by Reimar Döffinger (though overall the effects of this commit
are quite different). It still doesn't make "stuck button" problems
completely impossible; at least if the VO gets closed while a button
was down then nothing will send a button up event or reset state.
The code combining button presses into multibutton commands prevented
single click commands from triggering if a doubleclick event had been
generated from the same button press. As a result using the mouse
wheel to seek worked very badly. Special-case doubleclick events in
the event interpretation code to avoid this issue. This changes the
sequence of generated "keys" for press-release-press-release from
MOUSE_BTN0 MOUSE_BTN0-MOUSE_BTN0_DBL MOUSE_BTN0_DBL to
MOUSE_BTN0 MOUSE_BTN0_DBL MOUSE_BTN0.
"Keys" like MOUSE_BTN0-MOUSE_BTN0_DBL will never be generated now; any
existing configuration files using those need to be changed.
For some reason the -lavfdopts option was documented under MEncoder
options (despite not being MEncoder-specific), and was removed
together with MEncoder documentation in commit d76ad5f227. Restore the
documentation and convert it from its own section to normal option
documentation form. Also fix the example to actually work with current
lavf.
Add option -osd-fractions which enables display of fractional seconds
when showing the current playback time on OSD.
Based on a patch from Christian <herr.mitterlehner@gsmpaaiml.com> but
with several modifications.
Drop support for specifying demuxer types by numeric ID (options
-demuxer, -audio-demuxer and -sub-demuxer). Stop printing the numeric
values in "-demuxer help" output. Convert the list of DEMUXER_TYPE_XXX
defines to "enum demuxer_type".
The XML documentation was badly outdated, with various obsolete,
useless and and sometimes actively harmful advice. Delete a lot of the
obsolete stuff, without spending much effort to replace it for now.
In the FAQ section I removed some questions completely; in other cases
I only removed the answer if I thought the entry might be worth
keeping but the answer would need to be updated.
About the only useful part of the BUGS section on the manpage was a
link to mplayerhq.hu, and that doesn't really apply any more (includes
references to Subversion etc). Remove that section and update/remove
some outdated info.
There were multiple files specific to Zoran support, and they also
depended on internal FFmpeg headers (so it would probably have been
hard to get them to compile now even if you tried). It's obsolete now,
so just drop the whole mess.
dxr2 support had been broken quite a while and nobody noticed. There
were finally commits to fix it in the svn repo, but rather than apply
those I'll just drop dxr2 support.
By now VIDIX is too obscure to justify the amount of code and
complexity it requires in the sources. Although there is no pressing
need to drop it just now from a code point of view, I'll rather remove
it before release than release with VIDIX support and then drop it
later.
Some of the manpage mentions of VIDIX were in "this option supported
for these VOs" lists that looked outdated and failed to mention vdpau
for example. Replace such incorrect lists with a generic "not
supported for all VOs" mention.
Add some notes about BE/LE colorspaces and fix a small typo.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32769 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32741 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove AAC/FAAD2 installation instructions.
There is nothing special about building and installing FAAD2, so there is
no longer a need to keep maintaining instructions for it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32742 b3059339-0415-0410-9bf9-f77b7e298cf2
* sub:
sub/OSD: move some related files to sub/
subtitles: options: enable -ass by default
subtitles: change default libass rendering style
demux_mkv, chapters: change millisecond arithmetic to ns
cleanup: rename ass_* functions to mp_ass_*
subs: use correct font aspect ratio for libass + converted subs
cleanup: some random minor code simplification and cleanup
vf_vo: fix EOSD change detection bug
sd_ass: remove subreader use, support plaintext markup
subtitles: style support for common SubRip tags and MicroDVD
core: ordered chapters: fix bad subtitle parameter
subs/demux: don't try to enable sub track when creating it
subtitles/demux: store duration instead of endpts in demux packets
subtitles: add framework for subtitle decoders
options: add special -leak-report option
subtitles: remove code trying to handle text subs with libavcodec
cleanup: move MP_NOPTS_VALUE definition to mpcommon.h
subtitles: move global ass_track to struct osd_state
core: move most mpcommon.c contents to mplayer.c
core: move global "subdata" and "vo_sub_last" to mpctx
subtitles: remove sub_last_pts hack
options: move -noconfig to option struct, simplify
There are still some problems with -ass. For example some other
subtitle options won't work the same way or at all with it enabled,
and inserting the video filter for VOs that lack native rendering
support won't work with different colorspaces. However I think that
the benefit from styling support outweights those disadvantages, and
also that the "discoverability" of features is better this way; it
will be easier for people who encounter problems to find -noass than
for people who see no styling to find out that they could add it with
-ass.
Enable -ass by default. Also fix other outdated information in the
manpage entries for -ass and -fontconfig.
This really should have been added to the manpage at the start of the
previous decade. There's still bad advice about -playlist in the XML
docs, but I'll remove that later when purging more obsolete/wrong
stuff from there.
Allow negative values of the "deint" parameter and make them select
the same deinterlacing mode as the corresponding positive value, but
without enabling deinterlace on startup. This is useful for
configuration files. Also tweak the overall manpage description of
vo_vdpau a bit to make it sound less as if the VO would be for
hardware acceleration only.
* hr-seek:
input: add default keybindings Shift+[arrow] for small exact seeks
input: support bindings with modifier keys for X input
core: audio: make ogg missing audio timing workaround more complex
core: add support for precise non-keyframe-limited seeks
core: add struct for queued seek info
commands: add generic option -> property wrapper
options: add "choice" option type, use for -pts-association-mode
core: remove looping in update_video(), modify command handling a bit
core: seek: use accurate seek mode with audio-only files
core: avoid using sh_video->pts as "current pts"
libvo: register X11 connection fd in input event system
core: timing: add special handling of long frame intervals
core: move central play loop to a separate function
Conflicts:
DOCS/tech/slave.txt
Add support for seeking to an arbitrary non-keyframe position by
decoding video starting from the previous keyframe. Whether to use
this functionality when seeking is controlled by the new option
-hr-seek and a new third argument to the "seek" command. The default
is to use it for absolute seeks (like chapter seeks) but not for
relative ones. Because there's currently no support for cutting
encoded audio some desync is expected if encoded audio passthrough is
used. Currently precise seeks always go to the first frame with
timestamp equal to or greater than the target position; there's no
support for "matching or earlier" backwards seeks at frame level.
Make "-lavdopts threads=0" mean an autodetected number of threads, and
make that the default value of the option. Also increase the upper
limit of the option from 8 to 16. Add new file osdep/numcores.c which
tries to determine the number of cores available on the machine.
numcores.c is based (heavily modified) on public domain numcpus.c by
Philip Willoughby <pgw99@doc.ic.ac.uk>, downloaded from
http://csgsoft.doc.ic.ac.uk/numcpus/
Add mp_property_generic_option(), a property function that can be used
for generic option-based properties that do not require any action
beyond manipulating the value of the option variable. Currently it
directly implements GET and SET, plus STEP_UP for "choice" options
only. Use it to add a property for -pts-association-mode (not
particularly useful in normal use, but serves as a test).
Add a "choice" option type. Options of this type take a string as
input and set an int option variable to the value corresponding to the
string. The string->int mapping is option-specific and is given in the
option definition. Strings not found in the mapping are rejected as
invalid option values.
Change the option -pts-association-mode to use this new option type
and accept values "auto, decoder, sort" instead of "0, 1, 2". The
change in accepted values shouldn't cause problems as this option is
not appropriate to use in normal user config files.
-novideo is the right way to disable video, and should also work in
more cases now that lavf is used as the default demuxer for more formats
(like AVI; internal AVI demuxer fails with -novideo).
Also change the man page description of -novideo a bit to make it
sound less negative about the chances of the option working.
Some Matroska files have inaccurate ordered chapter endpoints, and so
parts where one chapter should end and the next begin at the same
timestamp were not merged. This resulted in an unnecessary seek over a
minimal distance. Add a heuristic to merge parts with a minimal gap or
overlap between them.
Based on patch by Hector Martin <hector@marcansoft.com>.
Add code to enforce matching pts with video when (re)starting the
audio stream, by either cutting away the first samples or inserting
silence at the beginning. New option -noinitial-audio-sync can be used
to disable this and return to old behavior.
If the option is enabled and all audio has been buffered to the AO,
then the player will move to the next file without waiting for the
buffered audio to drain, while leaving the AO initialized. If the
playback of the next file starts quickly enough (before the AO buffer
empties) then it should continue writing audio to the same AO with no
gap in between.
Further review very welcome, but it is time (and good enough) to add this.
Patch by Gordon Schmidt [gordon.schmidt s2000.tu-chemnitz de] with
changes by Endre Kollár [taxy443 gmail com].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32527 b3059339-0415-0410-9bf9-f77b7e298cf2
If a specified key is pressed during playback, the current stream is
captured to a file, similar to what -dumpstream achieves.
original patch by Pásztor Szilárd, don tricon hu
Taken from the following svn commits, but with several fixes and
modifications (one obvious user-visible difference is that the default
key binding is 'C', not 'c'):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32524 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32529 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32530 b3059339-0415-0410-9bf9-f77b7e298cf2
Require DirectFB version 0.9.15 instead of 0.9.13.
This simplifies the build system at the cost of requiring a library
version that was released at the end rather than the middle of 2002.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32251 b3059339-0415-0410-9bf9-f77b7e298cf2
Simplify DirectFB check.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32252 b3059339-0415-0410-9bf9-f77b7e298cf2
Require DirectFB version 0.9.22.
This allows getting rid of a lot of library version check #ifdeffery.
Release 0.9.22 is from February 2005, so the requirement is reasonable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32253 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove empty paragraph from TV input chapter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31977 b3059339-0415-0410-9bf9-f77b7e298cf2
Merge TV input and TV teletext chapter into the usage chapter.
This improves the overall structure of the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31978 b3059339-0415-0410-9bf9-f77b7e298cf2
Restore mistakenly removed TV input chapter introduction.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31979 b3059339-0415-0410-9bf9-f77b7e298cf2
Merge radio chapter into the usage chapter.
This improves the overall structure of the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31980 b3059339-0415-0410-9bf9-f77b7e298cf2
This improves the overall structure of the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31970 b3059339-0415-0410-9bf9-f77b7e298cf2
Merge CD/DVD chapter into the usage chapter for all translations.
This improves the overall structure of the documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31971 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove usage.xml symlink in the Chinese documentation translation.
It will be replaced with the English text in a moment.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31965 b3059339-0415-0410-9bf9-f77b7e298cf2
Add copy of English usage.xml file to Chinese translation.
This will be useful to merge other parts of the Chinese translation into it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31966 b3059339-0415-0410-9bf9-f77b7e298cf2
The package list for Debian systems is not specific to the Sarge release.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31841 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove instructions for installing XML/XSL packages from source.
This information is outside the scope of this README file.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31842 b3059339-0415-0410-9bf9-f77b7e298cf2
Simplify xmllint test.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31836 b3059339-0415-0410-9bf9-f77b7e298cf2
cosmetics: Drop leading underscores from variable names.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31837 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove unused variable fake_docbook_xsl.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31838 b3059339-0415-0410-9bf9-f77b7e298cf2
Adding XML entities for the English XML files to main.xml is enough.
The English version is the master and will always be complete.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31839 b3059339-0415-0410-9bf9-f77b7e298cf2
cosmetics: Use more compact "if .. then" shell syntax.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31840 b3059339-0415-0410-9bf9-f77b7e298cf2
Simplify adding --catalogs option to xsltproc/xmllint command line.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31843 b3059339-0415-0410-9bf9-f77b7e298cf2
Add an XML catalog search path that works for current macports systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31844 b3059339-0415-0410-9bf9-f77b7e298cf2
whitespace cosmetics: fix indentation
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31845 b3059339-0415-0410-9bf9-f77b7e298cf2
Skip searching for an xmllint command.
The xmllint target is separate from building the documentation; thus if xmllint
is not available, the xmllint targets can fail without further harm.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31846 b3059339-0415-0410-9bf9-f77b7e298cf2
Almost all files are v2+, but there are some bits of v2 only code
left, so MPlayer as a whole is still v2 only.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31835 b3059339-0415-0410-9bf9-f77b7e298cf2
Drop one pointless subsectioning level from radio input chapter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31815 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove subsection that describes how to tweak CD/DVD drives.
It is getting outdated and outside the scope of MPlayer documentation.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31816 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless and non-informative SDL section from video output chapter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31817 b3059339-0415-0410-9bf9-f77b7e298cf2
Drop one level of pointless subsectioning.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31818 b3059339-0415-0410-9bf9-f77b7e298cf2
Split TV chapter in two.
This avoids a chapter without content apart from the (sub)sections.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31819 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove MTRR section from video output chapter.
The information it contains should be irrelevant in 2010.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31820 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove graphics cards subsections from Xv section in video output chapter.
The information contained is very outdated.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31821 b3059339-0415-0410-9bf9-f77b7e298cf2
Patch by Paul Huwe [reicow yahoo com] with some modifications by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31794 b3059339-0415-0410-9bf9-f77b7e298cf2
Printing maximum volume only works when prefering float format.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31762 b3059339-0415-0410-9bf9-f77b7e298cf2
Add output device selection and correctly set the default device if
it's selected.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31715 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix cosmetics after r31715.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31716 b3059339-0415-0410-9bf9-f77b7e298cf2
Independent tests indicate that GLX_STEREO is working fine on
supported hardware.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31647 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31648 b3059339-0415-0410-9bf9-f77b7e298cf2
