This causes more constant reading from the DVB device,
and seems not to hurt the stream-controls.
As the device cache seems to fill up when not
reading from it for several seconds, reading
into the cache fixes desync-issues after
the initial analyzeduration of the demuxer.
Was already possible before by injecting the magic PID
8192 into channels.conf, the flag makes this much more
useable and we also have it documented.
Useful not only for debugging, but also for incomplete
channels.conf (mplayer format...), multi-channel
recording, or channels which do dynamic PID switchng.
full-transponder is also useful for channels which switch PIDs on-the-fly.
ffmpeg can handle this, but it needs the full stream with all PIDs.
There is the STD which contains service-names
(ffmpeg can understand it),
and the EIT which contains the EPG
(ffmpeg does not parse it, but e.g. VLC does).
As we now have more PIDs in general, increase the maximum
number of demuxers we can open. ffmpeg has an internal
limit of 64 PIDs, we are still far from that.
If VDR-channel-config is used, we know the service_id.
Using that, PMT can be extracted from PAT (code for that
inspired by szap-s2 again).
For this, we need to demux PAT with a special filter-setup,
and once PMT was found it can be added to the PID-list.
PMT is only resolved the first time one tunes to a channel,
then stored in the channel-list in memory.
With PMT available, ffmpeg can safely decode the teletext-pids.
I also added a comment explaining the potentially occuring structures for future reference.
For tokenization, a custom strtok_r implementation is used,
inspired by strtok_r as implemented in musl and ffmpeg,
hopefully slightly more readable (av_strtok_r is not available in libav,
and strtok_r is not available everywhere).
Move PID-string parsing into a separate function, reduces code-duplication.
Drop TPID-parsing again since teletext-stream seems not really correctly identified (ffmpeg guessed mp3 in my test...).
Parsing now done using strtok + sscanf instead of sscanfs with fixed numbers of expected fields -
gives more correct checking of PID-overflow, will allow VDR-style PID-field parsing.
The PID-parsing is not really nicely done and also does not yet handle the special VDR-style syntax.
A later commit will move the parsing to a separate function handling that which also checks that the maximum PID-count is not exceeded.
In mplayer-style channels-config, we had a LNB-field used for that.
In old VDR times, the location-field was also containing DISEQc information,
now it does that only indirectly (location => LNB => vdr knows from lnb-config).
We only accept it as this if the field is fully numeric.
Now also "stream ID" (for DVB-S2) and "inversion" are understood.
The parameter-string can also provide information on FEC, rolloff etc. For DVB-S, "auto" which mpv uses by default should be fine, I can also confirm it works. For non-DVB-S cards, it might be useful to also parse this information in case of a vdr-channel list.
As I have no such hardware and thus would have to do it blindly, I added a FIXME.
Mostly complete vdr-channels.conf format documentation is at http://www.vdr-wiki.de/wiki/index.php/Channels.conf (german only).
Still incomplete. Initialize is_dvb_s2 boolean in channel-struct.
We first check whether the channels.conf-line at hand is sscanf'able with a vdr-style pattern. If yes, we assume it is a vdr-channel-config (we check whether sscanf consumed the full line).
The vdr-style config also contains a parameter-string which contains information about polarization + delivery type (e.g. DVB-S2).
With this change, S2-tuning works with a VDR-channel list.
Missing (later commits):
- vdr-parameter-string also contains other information, e.g. invert-flag, needs to be parsed.
- Diseqc-lnb-number is not present in VDR-config (I believe it is handled via the location-parameter + lnb-config there). For backwards compatibility, the location-parameter can be the lnb-number - we should test whether it is an int and assume this in this case.
- VID, AID and TID-lists are extremely ugly in their syntax for VDR. At the moment, only the first number is parsed (and TID fully ignored), needs to be fixed.
It contains now also a boolean which tells whether this is an DVB-S2 channel (not initialized yet - tbd in next commit).
We could also pass through the type of the delivery system (would be more flexible), but the delivery-system-enum is only available with S2API, so this is more backwards-compatible.
If someone has DVB-T2 / DVB-C2 hardware and extends the code to deal with it, this should be changed.
Also allows demuxers to buffer, and we explicitly discard stale QPSK events.
Inspiration taken from the szap-s2 implementation.
S2API is only used if available and for DVB-S cards - it might also be useful to have that for DVB-T2 / DVB-C2 tuning later, but I do not have the HW / no DVB-T2 broadcasting station nearby to test functionality.
This should do no functional changes, only usage of the different API. The S2API is more extensible and a requirement for all the HD-deliveries (e.g. DVB-S2) and since 2.6.28 is the successor of the old API.
Tuning to DVB-S2 channels actually already "works" like this if the delivery is hardcoded in - for a fully working implementation, the channels.conf.sat would need an additional field indicating the delivery type (VDR-type channels.conf have that).
This commit also:
- Cleans up some debug output.
- Moves an unneeded usleep(100000) (only needed for diseqc switching for SAT) into the DVB-S-only part of the implementation.
Define a new macro "DVB_USE_S2API" to be used to switch to S2API if available,
also document what is the main difference in the new S2API.
StreamID-handling is only supported since API 5.2, and some macros
were renamed or only added later with 5.8 (somewhere around kernel 3.6),
so some define-fixups are needed to support these intermediate
kernel header versions.
Commit 87c13de6 added a fallback to video resolution if the subtitle
resolution is unknown. Apparently this fixed some broken files with
vobsubs.
This broke some DVB subtitles. Apparently .ts captures with 1920x1080
video resolution and 720x576 subtitles do exist. The sample at hand had
some streams with 720x576 resolution and no sub resolution set, and some
streams with 1920x1080 resolution and sub resolution set (both against
the same 1920x1080 video). My conclusion is that 720x576 is the only
reasonable fallback for DVB (but I can't be sure).
The fallback is removed for PGS too. I don't know about the PGS case; it
seems the sub resolution must always be set, so it shouldn't matter.
Fixes#1425.
This makes vo_opengl_cb respond to controls like "gamma" and
"brightness". The commit includes an awkward refactor for vo_opengl to
make it easier for vo_opengl_cb.
One problem is a logical race condition. The set of supported controls
depends on the pixelformat, which in turn is set by reconfig(). But the
actual reconfig() call (on the renderer) happens asynchronously on the
renderer thread. At the time it happens, the player most likely already
tried to set some controls for command line options (see init_vo() in
video.c). So setting this command line options will fail most of the
time, though it could randomly succeed. This can't be fixed directly,
because the player can't wait on the renderer thread, because the
renderer thread might already wait on the player.
Although the line count increases, this is better for making sure
everything is handled consistently for all users of the mp_csp_params
stuff.
This also makes sure mp_csp_params is always initialized with
MP_CSP_PARAMS_DEFAULTS (for consistency).
No more equals signs for options that don't take values.
Complete values for options with preset choices.
Complete --no-whatever where applicable.
Fixes#997.
--sub-scale-by-window=no attempts to keep subs always at the same pixel
size.
The implementation is a bit all over the place, because it compensates
already done scaling by an inverse scale factor, but it will probably do
its job.
Fixes#1424. (The semantics and name of --sub-scale-with-window are
kept, and this adds a new option - the name is confusingly similar, but
it's actually analogue to --osd-scale-by-window.)
This adds an "auto" choice to the concurrent-frames suboption, and makes
it the default.
I'm not so sure about making this the default, though. It could lead to
excessive buffering with large CPU counts. But we'll see.
Our own code was introduced when FFmpeg didn't provide this API (or
maybe didn't even have a way to determine the CPU count). But now,
av_cpu_count() is available for all FFmpeg/Libav versions we support,
and there's no reason to have our own code.
libavutil's code seems to be slightly more sophisticated than our's, and
it's possible that the detected CPU count is different on some platforms
after this change.
If there's only 1 chapter, the seeking by chapter (using the chapter
property) will either jump to the chapter point, or quit playback. This
is as designed, but seems like a useless and annoying behavior.
Removes an annoying "No video PTS! Making something up." warning.
Mark it as keyframe, which is needed to prevent strange behavior with
PNG. Also, don't leak the picture data.
Options which take colors accept two variants. The first is "r/g/b/a",
the second is "#AARRGGBB". Since they put alpha at different places,
it's probably better to document the second variant explicitly. (It's a
bit strange that they put alpha in different places, but on the other
hand, it's kind of natural. The second variant should probably be
considered deprecated.)
mpv_opengl_cb_uninit_gl() can be called at any time; but then the
decoder must be destroyed due to complications with hardware decoding.
This is why kill_video() exists. To make things easier, there is the
invariant that while vo_opengl_cb is active, the OpenGL state must
exist. But kill_video() didn't actually destroy the VO; only the video
decoder. This could trigger an assertion (vo_opengl_cb.c:187).
Actually, the video output is always destroyed lazily at a later point
if the decoder is destroyed, but not early enough for out purposes.
Returning the property before the window is mapped could lead to
confusing behavior, and in particular strange differences between
vo_vdpau and vo_opengl. (vo_opengl creates the window right at the
start, while vdpau waits until the first reconfigure event.) It might
even be possible that for vo_opengl random results were returned,
because the hidden window can have different placement than the actual,
final one on initial video reconfig.
Fix this by returning the property only if the window is considered
mapped. command.c handles this case specifically, and makes the property
unavailable, instead of returning an empty list.
Niklas Haas
James Ross-Gowan
wm4
Oliver Freyermuth
Philip Sequeira
Soeren D. Schulze