The current documentation lacks clarity regarding the interaction
between the `repeatable` and `complex` options. Through an analysis
of the source code (`player/lua/defaults.lua` and
`player/js/defaults.js`), it was observed that the `repeatable` option
is only meaningful when the `complex` option is not enabled.
Additionally, the `complex` option in the existing documentation is
confusing, actually `fn` can be called on key repeat when `complex` is
`true` and `repeatable` is not `true`.
To address these issues, the documentation for the `repeatable` option
was updated to specify that it only applies when the `complex` option is
not set to `true`. Furthermore, the description of the `complex` and
`event` were revised to acknowledge the occurrence of key repeat events.
This is technically due to the previous commits that made subtitle
rendering more efficient by eliminating redraws, but working around this
particular edge case is useless. The sub-clear-on-seek option was
originally introduced in d5940fabcd and
specifically is a workaround for completely broken mkv files. There is
no reason to use it otherwise. Because that option disables all
duplicate checking and the previous commits rework subtitle rendering in
the still image case to be dependent on keeping track of packets, the
end result is that you will get the same line rendered multiple times.
However the important case of broken mkv files with duplicate ReadOrder
fields still work just fine with --no-video. So instead of bothering
trying to make this option "work", just clarify that stuff can break
since, again, there's no reason to use it other than as a workaround for
broken files.
* Range of accepted values for teletext_page now include 0 and -1.
* 0 means "subtitle" and -1 means "*".
* Make 0 the default.
Signed-off-by: Mohammad AlSaleh <CE.Mohammad.AlSaleh@gmail.com>
Deinterlacing required that the user set it on/off themselves, but we
actually have handy flags for detecting if a frame is interlaced. So
it's pretty simple to make an auto option using that. Unfortunately,
life is not quite that simple and there are known cases of false
positives from the ffmpeg flags so we can't make auto the default value.
However, it still may have some utility for some people, and the
detection could potentially be improved upon later. Closes#10358.
vo_rpi and its related code has pretty much historically been a
disaster in mpv. The build regularly gets broken and since nobody uses
it, it takes months for anyone to notice. There was also that time where
fullscreen was broken for about a year and a half. Also building in waf
was entirely broken for about a couple of years or so due to mysterious
reasons no one ever figured out (meson magically fixed it).
Anyways, once again the build is broken due to rpi being forgotten about
again, but instead of pretending to support this crap. Just drop it all.
Nowadays, mmal hwdec is a relic since these devices are better off using
the v4l2m2m ffmpeg fork instead which actually uses KMS properly. RPI 1
and 2 probably can't do this and will remain broken but oh well blame
Broadcom for being special snowflakes and not using standard APIs (my
rockpro worked out of the box; just saying). RPI 2 is nearly 10 years
old anyways, so I think you can afford a new SBC by now. If we were
nicer, there would be a deprecation period, but this is broken in the
last major release anyway so too late.
Closes#13402.
This can be used to auto reload the input configuration file, e.g. in
vim:
autocmd BufWritePost ~/.config/mpv/input.conf silent !echo load-input-conf %:p | socat - /tmp/mpvsocket
Partially fixes#6362.
Additionally this can be used as a replacement for deprecated input
sections if they are ever actually removed. For example, if you want to
define different bindings for images, you can load-input-conf an
input.conf for images, and load the original again when switching to a
video. Though currently you would have to redefine builtin bindings that
were overwritten with image ones in the default input.conf.
Unlike set include mpv.conf, this works after playback has started. It
can be used to auto reload the configuration, e.g. in vim:
autocmd BufWritePost ~/.config/mpv/mpv.conf silent !echo load-config-file %:p | socat - /tmp/mpvsocket
Partially fixes#6362.
Some X11 window managers support controlling the title bar independently
from other window decorations with _MOTIF_WM_HINTS. This allows hiding
the title bar while keeping other decorations like the resizing borders.
Let mpv respect the --title-bar option on X11 so --no-title-bar can hide
the title bar only like on win32.
Save the cache to separate files to avoid loading/saving a huge combined
libplacebo.cache. This approach allows the saving of only new cache
objects and avoids resaving the entire cache, especially even if only a
tiny change was made.
This commit improves the cold start time of mpv and avoids saving data
when it's not necessary.
Number of changes were made:
- each cached object is saved in its own file
- cache files are prefixed with the name of cached object
- cache directory is cleaned on each uninit
- the least recently used cache files are removed if cumulative cache
size is above limit
- files used in the recent 24 hours are not removed to allow changes
to mpv.conf without worrying about the cache being removed during
experimentation
- shader cache size limit is set to 128 MiB
- icc cache size limit is set to 1.5 GiB
- cache objects are loaded/saved as needed
This commit eliminates the runtime performance penalty associated with
the size cache. While we continue to maintain the cache limit to prevent
retaining stale objects, mpv now only loads a small subset of files that
are currently required for playback, instead of loading all files.
I don't actually deinterlace ever but allegedly this is better than
yadif, and there's no real reason to not have this be the fallback
deinterlace when we're not using hw frames. Also change various mentions
of yadif to bwdif. Ref #12835.
This exports `current-gpu-context` property, which is the string
description of the current active GPU context. This allows scripts to
uniquely identify the platform and backend used for --vo=gpu
and --vo=gpu-next.
mp.observe_property('foo', nil, ...) calls the handler at least 2 times
on each playlist change even when the property doesn't change. This is
dangerous because if you haven't read observe_property's documentation
in a long time this is easy to forget, and you can end up using it for
handlers that are computationally expensive or that cause unintended
side effects.
Therefore, this commit discourages its use more explicitly in the
documentation, and replaces its usages in scripts.
For console.lua, observing focused with type nil leads to calling
mp.osd_message('') when changing file while playing in the terminal with
the console disabled. I don't notice issues from this, but it's safer to
avoid it.
For playlist and track-list this doesn't really matter since they
trigger multiple changes on each new file anyway, but changing it can
avoid encouraging people to imitate the code.
One usage of none in stats.lua is kept because according to b9084dfd47
it is a hack to replicate the deprecated tick event.
When running the console in the terminal, style log lines with the same
escape sequences as msg.c.
mp.input can also specify terminal escape sequences, e.g. a script to
select a playlist entry can invert the color of the selection.
Also add a missing newline to help's error message.
This doesn't actually work on either Windows or Linux with --terminal.
With --no-terminal or --no-input-terminal the SIGTERM handler is never
registered, so it definitely can't work.
Just remove the note about signals because it would be complicated to
explain that they don't terminate abruptly only with --terminal and only
if that signal has a handler, and it wouldn't be of interest to most
users.
fe875083b3 confused things a bit and made
--no-subs-with-matching-audio actually mean what it says: no subtitles
if the languages match. However, the option actually meant no non-forced
subtitles not no subtitles at all. This isn't really intuitive so
instead of changing the behavior back to the old way (we already have a
release since then), add a third option "forced" which is equivalent to
the old meaning of --no-subs-with-matching audio. Fixes#13151.
Currently, libplacebo always tries to reconfigure the d3d11 swapchain
to a 10-bit output format because disable_10bit_sdr isn't set to true,
even when an 8-bit format is explicitly requested via
--d3d11-output-format.
Fix this by passing the requested output format preference to libplacebo.
Document that this option may be ignored.
--ao=pipewire has been preferred on Linux for a long time, and this note
even makes it sound like alsa is preferred on any system. Just say that
the print order is the order in which the drivers are tried so this note
won't have to be updated again in the future, like --gpu-context's
documentation does.
This section has no reason to exist anymore because:
- No "desktop issues" sections exist for other platforms, and all other
Linux-specific issues are represented as notes for options. This section
only addressed one specific issue.
- This section was shortened significantly with commit
2c46ae8ea3, so there is no need for
this to be a separate section anymore.
- This section was shortened again with commit
d5e681e95d, when the original rationale
behind this section became outdated because GNOME has implemented the
idle inhibit protocol.
The historical info is moved to the documentation of --stop-screensaver.
Some places in the manpage uses `.. admonition:: Warning` instead of
the specific directive type `.. warning::` for warning admonitions.
This causes the "Warning" text appearing in black color instead of red.
Correct them here.
- --image-display-duration does not hide the OSC.
- Saying "Setting --image-display-duration" makes no sense because it is
not a boolean and it cannot be unset.
When hovering certain elements over the OSC, using the mouse wheel can
result in special commands (such as seeking, changing audio tracks,
etc.) Not everyone neccessarily wants this feature, so add an option to
make it possible to disable all of it. Maybe more fine-tuned control
would be more ideal, but probably not worth it. Fixes#13096.
f1c4d20e65 added this option, but the
documentation is actually backwards. --replaygain-clip allows clipping.
Having it disabled, the default, prevents it. Keep the behavior the
same, but change the documentation to reflect reality. Closes#13111.
This is useful for completing files and more rarely for profiles. It
will also be useful to third-party scripts interacting with the console
once the API to do it is merged.
I honestly don’t care either way but I also don’t believe this innocent
and cute hat is worth repeatedly having people show up on the issue
tracker to aggressively virtue signal and then shit-talk the project
elsewhere when their “concerns” are ignored and made fun of.
For the record, I approve of neither brand of childish nonsense.
If your workflow depends on December festivities, feel free to use an
alternative OSC implementation.
Fixes#13082 and #9548
This filter is a bit complicated, but one of the essential parts of it
is removing text enclosed by particular set of characters (e.g. text
inbetween []). This was previously hardcoded to only take into account
parenthesis and brackets, but people may want to filter more things so
make this customizable. The option only takes "left hand characters" so
the right pair is mapped internally if applicable. If not, then we just
use the same character. Fixes#8268 since the unicode character in
question can just be passed to this option.
A simplified version of the text width estimation code from uosc.
An osd_overlay is created with compute_bounds=true for measuring the
width of the lower case alphabet at what's estimated to be the largest
font size possible without clipping.
The lower case alphabet was chosen to get decent results for proportional
fonts, even if they aren't officially supported.
Add --secondary-sub-delay option and decouple --sub-delay from secondary
subtitles. This produces desirable behavior in most cases as secondary
and primary subtitles tracks tend to be timed independently of one
another.
This feature is implemented by turning the sub_delay field in
mp_subtitle_opts into an array of 2 floats. From here the track index is
either passed around or derived when sub_delay is needed. There are some
cases in dec_sub.c where it is possible for dec_sub.order (equivalent to
track index) to be -1. In these cases, sub_delay is inferred as 0.
the cocoa backend was removed and all functionality is either available
on all macOS backends or explicitly only with cocoa-cb. the manual
should properly reflect that change.
also remove the last mention of the old cocoa backend.
This property was never encouraged. The manual even stated that "You
should avoid using it, unless you absolutely have to." Since we now have
user-data which is superior in every single way and replaces this,
delete this property. The manual also has threatened people for years
with the line "It's a makeshift solution which could go away any time
(for example, when a better solution becomes available)." We were nice
and deprecated it in 1d00aee8e1 for a
while to give script authors some time to update. Let's remove it for
good now.
Only vaapi-copy variant as nothing can map D3D12 resources currently.
And even if we would add resource sharing to D3D11 it would invoke copy
at some point, so there is no point really. Maybe in the future when
libplacebo get smarter about resource sharing on Windows, but practical
advantages are really small. I've tested it with Vulkan <-> D3D11
sharing and GPU <-> GPU copy is still invoked. Better than CPU memcpy,
something for the future.
The "auto" logic is vastly better than setting a specific size. This
option amounts to "allow users to shoot themselves in the foot" flag,
given that the vast majority of ICC profiles in the wild are fine on
17x17x17 or even smaller 3DLUTs.
Setting stupidly high --3dlut-size is the main source of ICC-related
slow startup issues, and there is absolutely no conceivably benefit to
going above the defaults except for pixel peeping and chasing tiny PSNR
increments.
D3D11 is actually the main platform that suffers from slow shader
compilation, typical Vulkan/GL drivers are either very fast to begin
with, or already internally cache.
Display aspect ratio (aspect) and pixel aspect ratio (par) are already
exported, but storage aspect ratio (sar) isn't. This value is needed to
display the storage aspect ratio for non-square pixel sources in stats.lua.
This exports two new properties: video-params/sar and video-params/sar-name.
Docmentation is updated accordingly.
Adds:
--secondary-sub-visibility
--video-aspect-method
--video-unscaled
--video-pan-x
--video-pan-y
--video-rotate
--video-crop
--video-zoom
--video-scale-x
--video-scale-y
--video-align-x
--video-align-y
Those properties are related to playback state and are likely expected
to be restored when resuming playback.
Removes:
--border
--fullscreen
--ontop
--osd-level
--pause
Those options are not really content related. I don't see much gain to
save them per each watch later entry.
the OpenGL cocoa backend was deprecated in 0.29, it has lot of bugs, is
completely unmaintained and can't properly playback anything anymore on
the newest macOS. it is time to remove it.
the old displayName property via the IODisplay API is not working
anymore on ARM based macs and was broken in at least one other case.
instead we use the new localizedName property introduced in 10.15 of the
NSScreen. we don't need any backwards compatibility since 10.15 is the
oldest version we support now.
configs and scripts that use the options and properties fs-screen-name,
screen-name or display-names need to be adjusted since the names could
differ from the previous implementation via the IODisplay API.
Fixes#9697
Stretch a subtitle duration so it ends when the next one starts.
Should help with subtitles which erroneously have zero durations.
I found such a subrip substitles stream in the wild.
Signed-off-by: Mohammad AlSaleh <CE.Mohammad.AlSaleh@gmail.com>
There's some geometry-related things that mpv has to calculate before
the window is actually mapped onto the screen in wayland. But there's no
way to know which output the window will end up on before it happens, so
it's possible to calculate it using the wrong values. mpv corrects
itself later when the surface event happens, but making the initial
guess work better can help in certain cases.
find_output is the only thing that needs to be changed here. Its main
purpose is to grab the right output based on user settings when we're
trying to full screen and giving a fallback in case we don't have
wl->current_output yet. The x11 code already does something similar, so
we're basically just copying it. Allow user settings like --screen and
--screen-name to influence the initial wl_output guess. Those options
won't actually place the window on that specific screen since we can't
do that in wayland, but if the user knows where the window will end up
beforehand it makes sense to listen to the arguments they pass. If
something goes wrong, then we just fallback to 0 like before.
currently hysteresis-secs only works when the demuxer-max-bytes fills
up. but it's possible for the cache-secs/demuxer-readahead-secs to be
reached first.
in those cases, hysteresis-secs doesn't work and keeps buffering
non-stop. but the goal of this option was to save power by avoiding
non-stop buffering so go ahead and make it respect cache-secs as well.
additionally remove some redundant repetition from the docs.
5f74ed5828 deprecated this many years ago.
The utility is questionable at best given that -remove exists and is
more natural to use. Free up some code and drop it.
The MPV_LEAK_REPORT environment variable was previously read in order to
determine whether or not to enable memory reporting for javascript
scripts. This is kind of weird and deviates from the norm of exposing an
option to the user. So let's just add --js-memory-report and disable it
by default instead.
--play-dir sounds like it has something to do with directories so change
it. The play_dir variable is used a bunch everywhere internally so
whatever just leave it alone instead of renaming that.
This option has exactly the same semantics are other mpv options that
override a particular thing with something from the user. So instead of
the "force-style" name, use "-overrides" which is more consistent.
The plural form is used since it's a list option.
Other similar options are in the form of --foo-override not
--override-foo. The display-fps one was backwards so flip it around the
other way for consistency reasons.
This better reflects what it actually does. As a bonus, script writers
won't be misled into thinking that fps displays the actual video or
display fps.
Peak detection greatly increases HDR experience. Performance hit of
non-delayed detection is not that significant and is in line with
current default settings.
I'm guilty of violating this, but surely I can't be the only one. 85 is
pretty small and there's plenty of lines in the codebase that go well
over that. Surely nobody programs on tiny screens anymore and the kernel
raised the limit to 100 a few years ago so let's just copy that.
Nobody except a chosen few (I'm not one of them) even knows what it
means. Multiple people thought it was actually some kind of rendering
bug. Just disable it by default. Closes#12671.
I started going through the blame but once I got to mplayer commits from
20 years ago, I stopped bothering. This obscure option has always been
disabled by default, but there's zero reason, as far as I know, to not
just enable it today. Some CDs (particularly very old ones) have the
first sector shifted a bit and not starting exactly at 0. This makes the
logic that tries to get all the chapters completely fail and thus you
can't skip through tracks. However if you just enable this obscure
option, it just works. For anything that starts exactly at 0, the
calculated offset is just 0 anyway so it's a no-op and works exactly the
same. So basically, there's literally no reason to not just always try
to correct for the offset of the first sector by default.
Fixes#8777.
Why a bigger search-interval is required:
scaletempo2 doesn't do a good job when the signal contains frequencies
less then 1/search_interval. With a search interval of 30ms that means
anything below 33.333Hz sounds bad.
Depending on the genre it's very for music to contain frequencies down
to 30Hz, and sometimes even a little bit below that. Therefore a higher
default value is needed to handle such cases.
Based on that an argument can be made for a value of 50, as that should
work down to 20Hz, or something even higher because movies sometimes
have some infrasonic content.
However the downside of big search intervals is increased CPU usage and
intelligibility at higher speeds, as it effectively leads to parts of
the audio being skipped.
A value of 40 can handle frequencies down to 25Hz, enough for all music
except very rare edge cases, while still providing decent
intelligibility.
Why a smaller window-size is required:
Large values reduce intelligibility at high speeds and therefore small
values are preferred.
However when values get too small it starts to sound weird
(similar to librubberband).
In my testing a value of 10 already works well, but adding a small
safety margin seems like a good idea, especially since it made no
noticeable difference to intelligibility, which is why 12 was chosen.
add support for vulkan through metal and a translation layer like
MoltenVK. also add the possibility to use different render timing modes
for testing.
i still consider this experimental atm.
Not both of them. Formating it as `<name> (<desc>)` produced arguably
silly string like `hevc (HEVC (High Efficiency Video Coding))`. Unpack
this to show only description if available or name otherwise. Produces
way nicer results in stats.lua and similar places where this name is
printed.
Added to the functions `mp.add_timeout` and `mp.add_periodic_timer`.
If the `disabled` argument is set to `true` or a truthy value, the
timer will wait to be manually started with a call to its `resume()`
method.
Only vpdau-copy works with EGL. 2d1d815cc7 already added this to
manpage, and 1c8d2246bf removed it again, but that seems to be a mistake
because I can only get vdpau to work with GLX, and another user also
reported that only vdpau-copy was working for him with the default EGL.
9606c3fca9 added mp_time_ns(). Since we
apparently expose the mp_time_us() to clients already, there's no reason
to not also expose the new nanosecond one.
playlist-prev-playlist goes to the beginning of the previous playlist
because this seems more useful and symmetrical to
playlist-next-playlist. It does not go to the beginning when the current
playlist-path starts with the previous playlist-path, e.g. with mpv
--loop-playlist foo/, which expands to foo/{1..9}.zip, the current
playlist path foo/1.zip beings with the playlist-path foo/ of {2..9}.zip
and thus playlist-prev-playlist goes to 9.zip rather than to 2.zip.
Closes#12495.
Completion suggestions are now nicely formatted into a table.
Maximum width of the table is estimated based on OSD size and
font size.
This requires a new scaling factor option `font_hw_ratio`.
A factor of 2.15 works great for me,
but the default is 2.0 to avoid problems with other fonts.
The space between columns is automatically adjusted to be
between 2 and 8 spaces.
It tries to use as few rows as possible.
There's really no reason not to do this especially since sub-codepage
already defaults to auto. Also change logging in charset_conv since
telling us that the data is UTF-8 if the passed codepage value is "auto"
or "utf-8" is really not useful information (that's the expectation).
What are cue sheets not metadata or something? No reason this needs to
be a separate option so just deprecate it. This does mean that the
default value changes from "auto" to "utf-8" for this obscure fringe
case. I really hope people don't use non-UTF-8 cuesheets, but the next
commit will change the default of --metadata-codepage to "auto" so
there's no actual change in behavior to users.
This reverts commit 576e86bfa1 (functionally).
Right now, the --config-dir option silently causes all watch_later and cache
files to be written in the --config-dir as well. This is pretty uninitutive
and also not desirable in most cases so get rid of this.
libmpv users will have to set the corresponding options or env vars if they
want to keep the old behaviour.
Combine the cover art whitelist with the extensions in
--cover-art-auto-exts instead of hardcoding them. This is shorter,
checks for more extensions, saves us from updating the whitelist
everytime we add a new image extension, and since the whitelist had
gotten so big and the priority is calculated as
MP_ARRAY_SIZE(cover_files) - n, files like cover.jpg were taking
priority over cover art loaded by --cover-art-auto=exact.
There was a discrepancy in what the keybind was advertised to do in the
manual, and what the comment in input.conf described it to be doing. It
makes very little sense to add a keybind that changes the default and
doesn't allow you to get back to the default. This keybind is much more
useful if it toggles between yes/force instead of no/force.
There is zero reason for this to be an MPOpt. Because of how the
OPT_SUBSTRACT works, the option gets renamed to cdda-device instead, but
probably not a big deal since the old alias is still in place.
These were deprecated a long time ago and apparently didn't even work
with lavfi filters. Go ahead and remove them and additionally clean up
some code related to them. m_config_from_obj_desc_and_args becomes much
simpler now and a couple of arguments can be completely removed.
No wonder wm4 wanted to get rid of this. This option requires touching a
bunch of crap in the core player code. --stream-record works perfectly
fine and is a lot nicer so there's no need for this to exist anymore.
A bit different from the OPT_REPLACED/OPT_REMOVED ones in that the
options still possibly do something but they have a deprecation
message. Most of these are old and have no real usage. The only
potentially controversial ones are the removal of --oaffset and
--ovoffset which were deprecated years ago and seemingly have no real
replacement. There's a cryptic message about --audio-delay but who
knows. The less encoding mode code we have, the better so just chuck
it.
e9e93b4dbe added a warning about writing
the same value to the playlist-pos property that in the future it would
stop restarting playback. Instead, you should use the
playlist-play-index command for that. Well go ahead and drop the old
deprecated behavior now and do what wm4 wanted this to do: just ignore
if the same value is written again.
drop-frame-count and vo-drop-frame-count are ancient and have no reason
to exist anymore. The other change is that support for writing to
display-fps has been removed, and the property is strictly read-only
now. 3a2dc8b22e is what deprecated it with
a warning to users, so we can remove it without much trouble.
We've got an ungodly amount of OPT_REPLACED and OPT_REMOVED sitting
around in the code. This is harmless, but the vast majority of these are
ancient. 26f4f18c06 is the last commit
that touched the majority of these and of course that only changed how
options were declared so all of this stuff was deprecated even before
that. No use in keeping these, so just delete them all. As an aside,
there was actually a cocoa_opts but it had only a single option which
was replaced by something else and empty otherwise. So that entire thing
was just simply removed. OPT_REPLACED/OPT_REMOVED declarations that were
added in 0.35 or later were kept as is.
The defaults were awful and horribly regressed many files while also not
fixing banding on files that actually needed it, sometimes even
*increasing* banding due to the low threshold.
Fixes: 12ffce0f22
See-Also: haasn/libplacebo@e1e43376d1
This probably makes `vo_gpu` tone mapping worse, or something, but who
cares. The status quo for a while now has been to use `vo_gpu_next` if
you care about HDR rendering at all.
See-Also: haasn/libplacebo@ec60dd156b
See-Also: haasn/libplacebo@0903cbd05d
This new filter is slightly sharper, and significantly faster, than
mitchell. It also tends to preserve detail better. All in all, there is
no reason not to use it by default, especially from a performance PoV.
(In vo_gpu_next, hermite is implemented efficiently using hardware
accelerated bilinear interpolation)
See-Also: 75b3947b2c
It can hurt people's feelings to refer to scalers as "high quality" and
"low quality", when it is so subjective.
I decided to preserve the lanczos sections at least because it's mostly
talking about the difference between EWA Lanczos and Lanczos, which is
less controversial than the difference between, say, Lanczos and
Catmull.
Very amusingly, the manual previously said "The rpi VO will be removed
in mpv 0.23.0." Obviously, this didn't happen. It looks like wm4 changed
his mind on this with 51fd8f6fe1, but
never updated the docs. What was the problem? Who knows but allegedly
there are people that use --vo=rpi (it's supposed to work at least).
Actually context_rpi is probably broken since wm4 changed fullscreen
handling in 59cdfe50b2 and no one ever
bothered to fix it after that commit. In fact, that's the last commit
that touched that particular file. Someone did actually fix vo_rpi after
that so that one probably works at least. Anyways, I wouldn't mind just
deleting all rpi stuff, but there's probably some people out there that
use it so whatever. Remove the outdated deprecated language in the
documentation and just accept that we support this unfortunately.
Defining MPV_CPLUGIN_DYNAMIC_SYM during plugin compilation will replace mpv_*
functions with function pointers. Those pointer will be initialized when
loading the plugin.
It is recommended to use this symbol table when targeting Windows. The loader
does not have notion of global symbols. Loading cplugin into mpv process will
not allow this plugin to call any of the symbols that may be available in
other modules. Instead cplugin has to link explicitly to specific PE binary,
libmpv-2.dll/mpv.exe or any other binary that may have linked mpv statically.
This limits portability of cplugin as it would need to be compiled separately
for each of target PE binary that includes mpv's symbols. Which in practice
is unrealictis, as we want one cplugin to be loaded without those restrictions.
Instead of linking to any PE binary, we create function pointer for all mpv's
exported symbols. For convinience names of entrypoints are redefined to those
pointer so no changes are required in cplugin source code, except defining
MPV_CPLUGIN_DYNAMIC_SYM. Those function pointer are exported to make them
available for mpv to init with correct values during runtime, before calling
`mpv_open_cplugin`.
Note that those pointer are decorated with `selectany` attribute, so no need
to worry about multiple definitions, linker will keep only single instance.
This fixes cplugin usability on Windows. Without any API changes, only
recompilation with -DMPV_CPLUGIN_DYNAMIC_SYM is needed.
The goal is to provide simple to understand quality/performance level
profiles for the users.
Instead of default and gpu-hq profile. There main profiles were added:
- fast: can run on any hardware
- default: balanced profile between quality and performance
- high-quality: out of the box high quality experience. Intended
mostly for dGPU.
Summary of three profiles, including default one:
[fast]
scale=bilinear
cscale=bilinear (implicit)
dscale=bilinear
dither=no
correct-downscaling=no
linear-downscaling=no
sigmoid-upscaling=no
hdr-compute-peak=no
[default] (implicit mpv defaults)
scale=lanczos
cscale=lanczos
dscale=mitchell
dither-depth=auto
correct-downscaling=yes
linear-downscaling=yes
sigmoid-upscaling=yes
hdr-compute-peak=yes
[high-quality] (inherits default options)
scale=ewa_lanczossharp
cscale=ewa_lanczossharp (implicit)
hdr-peak-percentile=99.995
hdr-contrast-recovery=0.30
allow-delayed-peak-detect=no
deband=yes
scaler-lut-size=8
After fixing the B and C params for bcspline, it ended up being the same
thing as bicubic. There's no reason to have two names for the same
filter, so remove bcspline and keep bicubic to match libplacebo.
No need for this since it's entirely redundant with just changing the
filter radius directly. In fact, that's the whole *point* of the filter
radius - it does not modify the filter, it modifies the scaling of the
window.
Of course, this does not work for non-resizable kernels. But, really,
who cares?
And make it the default. In libplacebo, this uses internal heuristics to
pick a good size based on the actual ICC characteristics. This is
significantly less wasteful than always generating a 64x64x64 3DLUT (the
old status quo).
In vo_gpu, for simplicity, just default to 65x65x65. Note that this
provides slightly better accuracy than the old default of 64x64x64 for
technical reasons, and matches what libplacebo defaults to for typical
display profiles.
Adds catmull_rom as an example for --scale in the user manual, alongside
a brief description of the filter.
catmull_rom was only exposed to users as an available filter through
--scale=help. However, catmull_rom is very often aliased as "Bicubic" in
other applications such as GIMP and VapourSynth, and is a relatively
popular resizing filter. The documentation lacked any description of
catmull_rom, outside of a brief mention of it in the --tscale section.
While this resolves limitations of lavc decoder crop, it also introduces
artifacts with some of the source files or hwdec.
Depending on chroma sampler it is possible to sample outside the decoder
crop area, pulling dirty pixels into the image. Some decoders left them
zeroed, not black. To fix that we would need specifc solution during
mapping of avframes.
As most of the files require the crop only in bottom/right area, the
AVCodecContext::apply_cropping works ok for those.
For all other cases that require more fancy cropping like 1440x1080+240+0
user can manually set `--vd-apply-cropping=no`.
Limitations of the lavc crop are explained here:
https://ffmpeg.org/doxygen/trunk/structAVCodecContext.html#a4745c7455c317272c4e139d6f369936c
Fixes: 826ce82cad
In the never ending quest of trying to satisfy every possible user
request for subtitle autoselection, I ended up redoing how
--subs-fallback-forced works. The old behavior had it as strictly a
fallback-type option when there were no lang matches, but now we can
make it an active part of compare_track and it works along with slang to
select the desired track. Since it's a three state option, the no option
still works to avoid selecting any forced subtitle tracks. The meaning
of always slightly changes to mean "only select forced subtitle tracks"
and yes remains essentially the same (no special priority given besides
the audio matching subtitle language case).
Cropping by decoder has limitations with regards to aligment and hwdec.
It doesn't work to offset top left corner with hwdec and even with
software decoding it don't crop fully when resulting data would not be
aligned.
VO cropping is way more robust.
Setting `--video-crop=0x0+0+0` applies full frame crop, ignoring the
container one. Setting --video-crop=0 disables manual crop and restores
container one if it is available.
This makes it easier to apply crops without need to manually calc the
offset. I wanted for it to be top-left corner based, but maybe it was
not that good idea in retrospect.
Also rename scrw/scrh, since they don't refer to screen. It was copied
form m_geometry apply.
Third try is the charm? I stupidly missed that this option already
existed in my previous commits. Instead, add an auto value to it and
enable it by default for sd_lavc but not sd_ass. On my limited samples,
it seems to fix the gaps issue that can occur but without regressing
some duration timings for sub_lavc subtitles. Well hopefully anyway.
Fixes#12327.
We currently only allow specifying the Vulkan device to use by name. We
did this to avoid confusion around devices being enumerated in an
unpredictable order. However, there is a valid edge case where a system
may contain multiple devices of the same type - which means they will
have the same name, and so you can't control which one is used.
This change implements picking devices by UUID so that if names don't
work, you have some option available. As Vulkan 1.1 is a hard
requirement for libplacebo, we can just use UUIDs without conditional
checks.
Fixes#10898
The old mplayer / zap style format is not fully standardized across
channel scanners, so autodetection may fail if the file name
does not indicate the delivery system.
This is similar to DVB-T, but requires slightly different treatment
as there is no T/T2 differentiation.
Use a new channels.conf.isdbt file as channels config file.
There are way too many preexisting scripts that rely on this behavior
for video panning, like for example scripts that allow you to use mpv as
an image viewer. If this behavior is desired then it may be better to
add a new option for panning relative to the destination instead.
The restriction of video-pan-x/y being clamped to {-3, 3} also results
in the video being impossible to pan if it was zoomed in beyond a
certain degree.
This reverts commit 7d6f9e3739.
the osc currently allows for changing volume via scrolling when on top
of the volume icon. this does the same thing for the seekbar by allowing
seeking via scroll.
`--vo=gpu-next` no longer uses this option, being replaced entirely by a
luminance-based approach internally. And even for `--vo=gpu`, the values
other than 'hybrid' are universally inferior in quality.
In the interest of gradually reducing the amount of option bloat here,
remove this mostly-pointless option.
