Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
This can be reproduced with:
mpv short.wav -af 'lavfi="aecho=0.8:0.9:5000|6800:0.3|0.25"'
An audio file that is just 1-2 seconds long should play for 8-9 seconds,
which audible echo towards the end.
The code assumes that when playing with AF_FILTER_FLAG_EOF, the filter
will either produce output, or has all remaining data flushed. I'm not
really sure whether this really works if there are multiple filters with
EOF handling in the chain. To handle it correctly, af_lavfi should retry
filtering if 1. EOF flag is set, 2. there were input samples, and 3. no
output samples were produced. But currently it seems to work well enough
anyway.
The new signature is actually closer to how it actually works, and
someone who is not familiar to the API and how it works might make fewer
fatal mistakes with the new signature than the old one. Pretty weird.
Do this to sneak in a flags parameter, which will later be used to flush
remaining data of at least vf_lavfi.
Normally, audio decoder don't have a decoder delay, so the code was
fine. But FFmpeg supports multithreaded decoding for some audio codecs,
which introduces such a delay.
The delay means that we won't get decoded audio for the first few
packets, and that we need to do something to get the trailing audio
still buffered in the decoder when reaching EOF.
Two changes are needed to deal with the delay:
- If EOF is reached, pass a "flush" packet to the decoder to return the
buffered audio. Such a flush packet is automatically setup when
calling mp_set_av_packet() with a NULL packet.
- Use the PTS returned by the decoder, instead of the packet's. This is
important to get correct timestamps for decoded audio. Ignoring this
would result into offsetting the audio playback time by the decoder
delay. Note that we can still use the timestamp of the first packet
to get the timestamp for the start of the audio.
If the timebase is set, it's used for converting the packet timestamps.
Otherwise, the previous method of reinterpret-casting the mpv style
double timestamps to libavcodec style int64_t timestamps is used.
Also replace the kind of awkward mp_get_av_frame_pkt_ts() function by
mp_pts_from_av(), which simply converts timestamps in a way the old
function did. (Plus it takes a timebase parameter, similar to the
addition to mp_set_av_packet().)
Note that this should not change anything yet. The code in ad_lavc.c and
vd_lavc.c passes NULL for the timebase parameters. We could set
AVCodecContext.pkt_timebase and use that if we want to give libavcodec
"proper" timestamps.
This could be important for ad_lavc.c: some codecs (opus, probably mp3
and aac too) have weird requirements about doing decoding preroll on the
container level, and thus require adjusting the audio start timestamps
in some cases. libavcodec doesn't tell us how much was skipped, so we
either get shifted timestamps (by the length of the skipped data), or we
give it proper timestamps. (Note: libavcodec interprets or changes
timestamps only if pkt_timebase is set, which by default it is not.)
This would require selecting a timebase though, so I feel uncomfortable
with the idea. At least this change paves the way, and will allow some
testing.
These used the suffix _resync_stream, which is a bit misleading. Nothing
gets "resynchronized", they really just reset state.
(Some audio decoders actually used to "resync" by reading packets for
resuming playback, but that's not the case anymore.)
Also move the function in dec_video.c to the top of the file.
This includes the case when lavc decodes audio with more than 8
channels, which our audio chain currently does not support.
the changes in ad_lavc.c are just simplifications. The code tried to
avoid overriding global parameters if it found something invalid, but
that is not needed anymore.
Apparently just 5 packets is not enough for the initial audio decode
(which is needed to find the format). The old code (before the recent
refactor) appeared to use 5 packets, but there were apparently other
code paths which in the end amounted to more than 5 packets being read.
The sample that failed (see github issue #368) needed 9 packets.
Fixes#368.
This used to be needed to access the generic stream header from the
specific headers, which in turn was needed because the decoders had
access only to the specific headers. This is not the case anymore, so
this can finally be removed again.
Also move the "format" field from the specific headers to sh_stream.
sh_audio is supposed to contain file headers, not whatever was decoded.
Fix this, and write the decoded format to separate fields in the decoder
context, the dec_audio.decoded field. (Note that this field is really
only needed to communicate the audio format from decoder driver to the
generic code, so no other code accesses it.)
Move all state that basically changes during decoding or is needed in
order to manage decoding itself into a new struct (dec_audio).
sh_audio (defined in stheader.h) is supposed to be the audio stream
header. This should reflect the file headers for the stream. Putting the
decoder context there is strange design, to say the least.
When the decoder detects a format change, it overwrites the values
stored in sh_audio (this affects the members sample_format, samplerate,
channels). In the case when the old audio data still needs to be
played/filtered, the audio format as identified by sh_audio and the
format used for the decoder buffer can mismatch. In particular, they
will mismatch in the very unlikely but possible case the audio chain is
reinitialized while old data is draining during a format change.
Or in other words, sh_audio might contain the new format, while the
audio chain is still configured to use the old format.
Currently, the audio code (player/audio.c and init_audio_filters) access
sh_audio to get the current format. This is in theory incorrect for the
reasons mentioned above. Use the decoder buffer's format instead, which
should be correct at any point.
Commit 22b3f522 not only redid major aspects of audio decoding, but also
attempted to fix audio format change handling. Before that commit, data
that was already decoded but not yet filtered was thrown away on a
format change. After that commit, data was supposed to finish playing
before rebuilding filters and so on.
It was still buggy, though: the decoder buffer was initialized to the
new format too early, triggering an assertion failure. Move the reinit
call below filtering to fix this.
ad_mpg123.c needs to be adjusted so that it doesn't decode new data
before the format change is actually executed.
Add some more assertions to af_play() (audio filtering) to make sure
input data and configured format don't mismatch. This will also catch
filters which don't set the format on their output data correctly.
Regression due to planar_audio branch.
This used to be in bytes, now it's in samples. Divide the value by 8
(assuming a typical audio format, float samples with 2 channels).
Fix some editing mistake or non-sense about the extra buffering added
(1<<x instead of x<<5).
Also sneak in a s/MPlayer/mpv/.
Apparently this was completely broken after commit 22b3f522. Basically,
this locked up immediately completely while decoding the first packet.
The reason was that the buffer calculations confused bytes and number of
samples. Also, EOF reporting was broken (wrong return code).
The special-casing of ad_mpg123 and ad_spdif (with DECODE_MAX_UNIT) is a
bit annoying, but will eventually be solved in a better way.
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
Before this commit, the af_instance->mul/delay values were in bytes.
Using bytes is confusing for non-interleaved audio, so switch mul to
samples, and delay to seconds. For delay, seconds are more intuitive
than bytes or samples, because it's used for the latency calculation.
We also might want to replace the delay mechanism with real PTS
tracking inside the filter chain some time in the future, and PTS
will also require time-adjustments to be done in seconds.
For most filters, we just remove the redundant mul=1 initialization.
(Setting this used to be required, but not anymore.)
Replace the code that used a single buffer with mp_audio_buffer. This
also enables non-interleaved output operation, although it's still
disabled, and no AO supports it yet.
Based on earlier work by Stefano Pigozzi.
There are 2 changes:
1. Instead of mp_audio.audio, mp_audio.planes[0] must be used.
2. mp_audio.len used to contain the size of the audio in bytes. Now
mp_audio.samples must be used. (Where 1 sample is the smallest unit
of audio that covers all channels.)
Also, some filters need changes to reject non-interleaved formats
properly.
Nothing uses the non-interleaved features yet, but this is needed so
that things don't just break when doing so.
This affects 64 bit floats and big endian integer PCM variants
(basically crap nobody uses). Possibly not all MS-muxed files work, but
I couldn't get or produce any samples.
Remove a bunch of format tags that are not needed anymore. Most of these
were used by demux_mov, which is long gone. Repurpose/abuse 'twos' as
mpv-internal tag for dealing with the PCM variants mentioned above.
Apparently we were using FFmpeg-specific APIs. I have no idea whether
this code is correct on both FFmpeg and Libav (no examples, bad
doxygen... why do they even complaint aht people are using their APIs
incorrectly?), but it appears to work on FFmpeg. That was also the case
before commit ebc4ccb though, where it used internal libavformat
symbols.
Untested on Libav, Travis will tell us.
This member was redundant. sh_audio->sample_format indicates the sample
size already.
The TV code is a bit strange: the redundant sample size was part of the
internal TV interface. Assume it's really redundant and not something
else. The PCM decoder ignores the sample size anyway.
This accessed tons of private libavformat symbols all over the place.
Don't do this and convert all code to proper public APIs. As a
consequence, the code becomes shorter and cleaner (many things the code
tried are done by libavformat APIs).
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
There are some Microsoft Windows symbols which are traditionally used by
the mplayer core, because it used to be convenient (avi was the big
format, using binary windows decoders made sense...). So these symbols
have the exact same definition as the Windows one, and if mplayer is
compiled on Windows, the symbols from windows.h are used.
This broke recently just because some files were shuffled around, and
the symbols defined in ms_hdr.h collided with windows.h ones. Since we
don't have windows binary decoders anymore, there's not the slightest
reason our symbols should have the same names. Rename them to reduce the
risk for collision, and to fix the recent regression.
Drop WAVEFORMATEXTENSIBLE, because it's mostly unused. ao_dsound defines
its own version if the windows headers don't define it, and ao_wasapi is
not available on systems where this symbol is missing.
Also reindent ms_hdr.h.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@36461 b3059339-0415-0410-9bf9-f77b7e298cf2
Fixes playback of http://mpg123.org/test/44and22.mp3
Cherry-picked from MPlayer SVN rev. #36461, a patch by
Thomas Orgis, committed by by Reimar Döffinger.
This is basically a libavcodec API oddity: it can happen that
avcodec_decode_audio4() returns 0 (meaning 0 bytes were consumed). It
requires you to feed the complete packet again to decode the full
packet, and to successfully decode the following packets.
We ignored this case with the argument that there's the danger of an
endless decode loop (because nothing of that packet is apparently
decoded, so it would retry forever), but change it in order to decode
mpc8 files correctly.
Also add some comments to explain the mess.
Make the VF/VO/AO option parser available to audio filters. No audio
filter uses this yet, but it's still a quite intrusive change.
In particular, the commands for manipulating filters at runtime
completely change. We delete the old code, and use the same
infrastructure as for video filters. (This forces complete
reinitialization of the filter chain, which hopefully isn't a problem
for any use cases. The old code forced reinitialization too, but it
could potentially allow a filter to cache things; e.g. consider loaded
ladspa plugins and such.)
Matroska has an output sample rate (OutputSamplingFrequency), which in
theory should be forced instead of whatever the decoder outputs. But it
appears no software (other than mplayer2 and mpv until now) actually
respects this. Even worse, there were broken files around, which played
correctly with (in theory) broken software, but not mplayer2/mpv. Hacks
were added to our code to play these files correctly, but they didn't
catch all cases.
Simplify this by doing what everyone else does, and always use the
decoder's sample rate instead. In particular, we try to handle all
sample rate issues like libavformat's Matroska demuxer does.
It turns out that some code that was removed earlier was still needed.
avcodec_decode_audio4() can decode packets "partially". In that case,
you have to "slice" the packet and call the decode function again.
Codecs which need this are obscure and in low numbers. One sample that
needs it is here:
rsync://fate-suite.ffmpeg.org/fate-suite/lossless-audio/luckynight-partial.shn
(This one decodes in rather small increments.)
The new code is much simpler than what has been removed earlier,
though. The fact that we own the packet returned by the demuxer helps
a lot.
Not sure what should happen if avcodec_decode_audio4() returns 0.
Currently, we throw away the packet in this case. We don't want to be
stuck in an endless loop (could happen if the decoder produces no
output either).
This is not directly related to the handling of format changes itself,
but playing audio normally after the change. This was broken: the output
byte rate was not recalculated, so audio-video sync was simply broken.
Fix this by calculating the byte rate on the fly, instead of storing it
in sh_audio.
Format changes are relatively common (switches between stereo and 5.1
in TV recordings), so this fixes a somewhat critical bug.
pts_bytes can't just be changed at the end. It must be offset to the pts
value, which is reset with each packet read from the demuxer. Make sure
the pts_byte field is always reset after receiving a new PTS, i.e.
increment it after actually writing to the output buffer.
Flush the AVFormatContext's write buffer, because otherwise the audio
PTS will jump around too much: the calculation doesn't use the exact
output buffer size if there's still data in the avio buffer.
Partial packet reads were needed because the video/audio parsers were
working on top of them. So it could happen that a parser read a part of
a packet, and returned that to the decoder. With libavformat/libavcodec,
packets are already parsed, and everything is much simpler.
Most of the simplifications in ad_spdif could have been done earlier.
Remove some other stuff as well, like the questionable slave mode start
time reporting (could be replaced by proper code, but we don't bother).
Remove the unused skip_audio_frame() functionality as well (it was used
by old demuxers). Some functions become private to demux.c, like
demux_fill_buffer(). Introduce new packet read functions, which have
simpler semantics. Packets returned from them are owned by the caller,
and all packets in the demux.c packet queue are considered unread.
Remove special code that dropped subtitle packets with size 0. This
used to be needed because it caused special cases in the old code.
We don't need to deal with partial packet reads, manually using an audio
parser, or having to call the libavcodec decoder multiple times per
packet.
Actually, I'm not sure about the last point. ffplay still does this, but
the ffmpeg demuxing.c example doesn't.
The audio parser was needed only by the "old" demuxers, and
demux_rawaudio. All other demuxers output already parsed packets.
demux_rawaudio is usually for raw audio, so using a parser with it
doesn't usually make sense. But you can also force it to read
compressed formats with fixed packet sizes, in which case the parser
would have been used. This use case is probably broken now, but you
will be able to do the same thing with libavformat demuxers.
