Will be needed to override the demuxer's start time reporting. We could
be lazy and special-case it since the result is always 0 for the streams
that care, but doing it properly is better.
DVD playback uses a demuxer that signals to the frontend that timestamp
resets are possible. This made the frontend calculate the OSD playback
position based on the byte position and the total size of the stream.
This actually broke DVD playback position display. Since DVD reports a
a linear playback position, we don't have to rely on the demuxer
reported position, so disable this functionality in case of DVD
playback. This reverts the OSD behavior with DVD to the old behavior.
This allows using the vdpau decoders with -vd without having to use
the -hwdec switch (basically like in mplayer).
Note that this way of selecting the hardware decoder is still
deprecated. libavcodec went away from adding special decoder entries
for hardware decoding, and instead makes use of the "hwaccel"
architecture, where hardware decoders use the same decoder names as
the software decoders. The old vdpau special decoders will probably
be deprecated and removed in the future.
YCgCo can be manually selected, but will also be used if the decoder
reports YCgCo. To make things more fun, files are sometimes marked
incorrectly, which will display such broken files incorrectly starting
with this commit.
Useful for the j2k decoder.
Matrix taken from http://www.brucelindbloom.com/index.html?Eqn_RGB_XYZ_Matrix.html
(XYZ to sRGB, whitepoint D65)
Gamma conversion follows what libswscale does (2.6 in, 2.2 out).
If linear RGB is used internally for scaling, the gamma conversion
will be undone by setting the exponent to 1. Unfortunately, the two
gamma values don't compensate each others exactly (2.2 vs. 1/0.45=2.22...),
so output is a little bit incorrect in sRGB or color-managed mode. But
for now try hard to match libswscale output, which may or may not be
correct.
We only print an error message when POLLERR or POLLHUP occurrs, as the
something did go horribly wrong and the server will either deal with it or
crash.
Also add POLLOUT to the events.
Bump xkbcommon version and use the new xkb_keymap_from_buffer. This is more
secure, because the from_string expects a 0 terminated string, but this cannot
be guaranteed with mmap.
This commit remove a lot of linux specific code, like epoll. It also reduces
the complexity of the code. Instead of epoll we use poll which makes the
wayland backend more portable to other platforms.
This removes a good chunk of code trying to recreate key repeat.
Because the wayland protocol and xkbcommon don't have an interface for
auto-repeating pressed keys.
This broke .srt subtitles on gcc-4.8. The breakage was relatively
subtle: it set all hour components to 0, while everything else was
parsed successfully.
But the problem is really that sscanf wrote 1 byte past the sep
variable (or more, for invalid/specially prepared input). The %[..]
format specifier is unbounded. Fix that by letting sscanf drop the
parsed contents with "*", and also make it skip only one input
character by adding "1" (=> "%*1[...").
The out of bound write could easily lead to security issues.
Also, this change makes .srt subtitle parsing slightly more strict.
Strictly speaking this is an unrelated change, but do it anyway. It's
more correct.
The stream ID handling as it was changed in commit 654c34f was still
a little bit insane, and caused a regression with the cover art hack
(the stream set in demux->video->sh was incorrect for demux_lavf).
Simplify by always using stream_index for demux_stream->id, and getting
rid of that tid thing. It turns out that the id for subtitles isn't
special either (maybe demux_ts.c was the only thing left that required
this).
The code was attempting to get the ceiling of the double. Too bad NSSize has
floats inside of it and the int cast is nowhere to be seen. This caused
rounding errors by one pixel in the window size.
The old OSD font was a PostScript Type 1 font. Convert it to OpenType
to work around a fontconfig bug [1]. OpenType is a more modern format,
and the font file is quite a bit smaller, so this is actually a nice
change.
The conversion was done by opening the font with fontforge and saving
it as OpenType (CFF). fontforge showed a warning when doing this:
The font contains errors.
Self Intersecting
Bad Private Dictionary
These seem to be harmless.
[1] https://bugs.freedesktop.org/show_bug.cgi?id=63922
br://: Fix querying current chapter.
This also fixes specifying an end chapter via -chapter.
Based on patch by Olivier Rolland [billl users.sourceforge.net]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@36173 b3059339-0415-0410-9bf9-f77b7e298cf2
libavcodec decoder initialization failure caused a segfault, because it
wasn't properly reported back in init().
Also remove the return value from init_avctx(), which actually makes
things simpler. Instead, ctx->avctx can be checked to see whether
initialization was ok.
Usually SubRip files are not expected to contain ASS override tags,
but unfortunately these files seem to become more common. Example from
a real file:
1
00:00:00,800 --> 00:00:15,000
{\an8}本字幕由 {\c&H26F4FF&}ShinY {\c&HFFAE1A&}深影字幕组{\c&HFFFFFF&} 原创翻译制作
subassconvert.c escaped '{', so that libass displayed the above line
literally.
Try to apply a simple heuristic to detect whether '{' is likely to
start an ASS tag: if the string starts with '{\', and there is a
closing '}', assume it's an ASS tag, otherwise escape the '{' properly.
If it's a likely ASS tag, it's passed through to libass.
The end result is that the above script is displayed in color, while at
the same time legitimate uses of '{' and '}' should work fine. We assume
that nobody uses {...} for commenting text in SubRip files. (This kind
of comment is popular and legal in ASS files, though.)
This is an attempt to make quoting of sub-option values less awkward,
even if it works only with some shells. This is needed mainly for
vf_lavfi. Also update the vf_lavfi manpage section.
libavfilter changed the way a format list is passed to vf_format. Now
you have to separate formats with "|" instead of ":". If you use "|",
it prints an annoying message on every reinit:
[format @ 0x8bbaaa0]This syntax is deprecated. Use '|' to separate the list items.
...and it will probably stop working without warning at some point in
the future.
We need some very annoying ifdeffery to detect this case, because
libavfilter version numbers are just plain incompatible between Libav
and ffmpeg. There is no other way to detect this.
(Sometimes I wonder whether ffmpeg and especially Libav actually like
causing unnecessary pain for their users, and intentionally break stuff
in the most annoying way possible. Sigh...)
Rename the struct MPOpts "start_pause" field to "pause". Store the user-
pause state in that field, so that both runtime pause toggling and the
--pause switch change the same variable. Simplify the initialization of
pause so that using --pause and changing the file while paused is
exactly the same case (changing the file while paused doesn't unpause,
this has been always this way).
Also make it a bit more consistent. Before, starting with --pause would
reset the pause state for every file, instead of following the usual
semantics for option switches (compare with behavior of --fs).
The core pauses and unpauses automatically to wait for the network
cache (also known as buffering). This conflicted with user pause
control, and was perceived as if the player was unresponsive and/or
the cache just overturned the user's decisions.
Change it so that the actual pause state and the pause state as
intended by the user never conflict. If the user toggles pause, the
pause state will be in the expected state as soon as the cache is
loaded.
Resetting the filter graph helps dealing with filters which save state
between frames. This is important especially if they modify frame timing
or emit additional frames.
Unfortunately the libavfilter API doesn't have a way to do this
directly, so we have to use a dirty trick: we recreate the whole graph,
including format negotiation down and filter string parsing. ffplay does
this too. If libavfilter somehow decides to change output format or size
from what the first run in config() returned, mpv will explode. The same
applies to vf_next_query_format() return values (although this could be
mitigated, should it really happen).
There were two problems.
First, frames past the end of the current segment were added to the
index, which messed up backstepping. Check for the endpts before
added a frame to the index.
Second, it wasn't possible to step over segments which change the file.
Changing a file causes decoder reinitialization, which (rightfully)
is treated as discontinuity (and vo_pts_history_seek_ts was changed).
Add some extra code to pretend that a segment-switching seek/reinit
does not introduce discontinuities.
There's still a weird corner case: sometimes, you can frame step forward
on the last frame of a segment without reaching the next segment
immediately. This is because the playloop switches into audio-only mode.
The segment is switched when both audio and video have ended, so the
frame stepping will play random sized chunks of audio until the segment
will be switched. This gives the impression that backstepping doesn't
work perfectly, even though it's the other way around and frame stepping
behaves weird. This is a consequence of wanting to make frame stepping
work with audio, and is not really a bug.
Allows stepping back one frame via the frame_back_step inout command,
bound to "," by default.
This uses the precise seeking facility, and a perfect frame index built
on the fly. The index is built during playback and precise seeking, and
contains (as of this commit) the last 100 displayed or skipped frames.
This index is used to find the PTS of the previous frame, which is then
used as target for a precise seek. If no PTS is found, the core attempts
to do a seek before the current frame, and skip decoded frames until the
current frame is reached; this will create a sufficient index and the
normal backstep algorithm can be applied.
This can be rather slow. The worst case for backstepping is about the
same as the worst case for precise seeking if the previous frame can be
deduced from the index. If not, the worst case will be twice as slow.
There's also some minor danger that the index is incorrect in case
framedropping is involved. For framedropping due to --framedrop, this
problem is ignored (use of --framedrop is discouraged anyway). For
framedropping during precise seeking (done to make it faster), we try
to not add frames to the index that are produced when this can happen.
I'm not sure how well that works (or if the logic is sane), and it's
sure to break with some video filters. In the worst case, backstepping
might silently skip frames if you backstep after a user-initiated
precise seek. (Precise seeks to do indexing are not affected.)
Likewise, video filters that somehow change timing of frames and do not
do this in a deterministic way (i.e. if you seek to a position, frames
with different timings are produced than when the position is reached
during normal playback) will make backstepping silently jump to the
wrong frame. Enabling/disabling filters during playback (like for
example deinterlacing) will have similar bad effects.
It's not sure if there's anything that could trigger this accidentally.
Normally this can't happen, because hrseek ends always if the PTS is
large enough, the same condition which disables framedrop. Seeking
resets hrseek framedrop anyway.
On the other hand, this change makes the code easier to understand,
and might be more robust against weird corner cases.
Block X11's native key repeat, and use mpv's key repeat handling in
input.c instead.
No configure check for XKB. Even though it's an extension, it has been
part of most (all?) xlibs since 1996. If XKB appears to be missing,
just refuse enabling x11.
This is a potentially controversial change. mpv will use its own key
repeat rate, instead of X11's. This should be better, because seeking
will have a standardized "speed" (seek events per seconds when keeping
a seek key held down). It will also allow disabling key repears for
certain commands, though this is not done anywhere yet.
The new behavior can be disabled with the --native-keyrepeat option.