In 1f8013ff3f, I mistakenly thought this
was only used for modifier presses way back in the commit it was
introduced in, but it actually also handles non-english keys/letters.
Instead of returning early, we should try xkb_keysym_to_utf8 first and
then return if that doesn't do anything so the modifier can then be
handled in the appropriate event. Fixes#12009.
This has always been a pet peeve of mine and in fact I named the option
in meson "egl-wayland" with the intention of finally doing this. We call
everything that's egl "egl-foo" internally except for wayland.
We wanted to preserve the libplacebo v5.264.0 requirement for gpu_next
for this release, since this is the what most Linux distributions are shipping.
The VLC 3 <-> libplacebo v6 situation is an additional reason distros are not
likely to ship the newest libplacebo release soon.
This reverts commit b73d96776c.
Since this works by mpctx giving us a dummy image, we can be reasonably
be confident that when we receive a matching imgfmt with no underlying
hw_subfmt that this is simply force window from the player. Just allow
this to go through the usual wayland logic and skip the hwdec checking.
When we get the real image later, it will still error out on the
compositors that don't have proper support.
It's a bit of an edge case, but since we now allow the disabling of the
software fallback it's possible to have a situation where hwdec
completely fails and the mpv window is still lingering from the previous
item in the playlist. What needs to happen is simply that the vo_chain
should uninit itself and handle force_window if needed. In order to do
that, a new VDCTRL is added that checks vd_lavc if force_eof was set.
player/video will then start the uninit process if needed after getting
this.
There's an option that's supposed to stop mpv from falling back to
software decoding if hardware decoding fails. Except that it doesn't
work and can fallback to software decoding anyway. Correct this by
checking if all possible hwdec failed after the loop in
select_and_set_hwdec and that we have this option. If so, flag a bool to
force eof. In decode_frame afterwards, we then simply immediately return
an EOF.
When video width is not a multiple of slice size, the last slice will overflow. Fix this by adjusting the width of the last slice to fit within the video.
Fixes issue #10436
In sum there were three issues:
1. nominal_peak_luminance is an output parameter, not input
2. mpv internally uses MP_REF_WHITE which we need to scale by
3. the value should be left at its default for SDR
Together with the last change this means mpv can sucessfully
take HDR screenshots with --screenshot-sw without resulting
in a brightly colored mess. Though note that zimg does not
perform proper tonemapping.
As a consequence:
- write_avif now respects tag-colorspace=no
- write_lavc additionally sets colorspace and chroma_location
(of no consequence for png or jpeg)
mpv has historically always treated the various tiled states in
xdg-shell as maximized (probably because it was easier). Well it turns
out that there are some tiling compositors (hyprland) that allow tiled
windows to maximize themselves. This can lead to some scenarios where
mpv ends up doing a maximize on hyprland which actually works since it's
not a no-op like on sway. Fix this by separating out the tiled state
from maximize. It works mostly the same, but the main difference is that
there's no request to tile yourself like there is with maximize. Should
fix#11954.
There's a lot of checks that are along the lines of !maximized &&
!minimized or vice versa. Make a locked_size boolean and store the
value of this in here to avoid writing long lines since the next commit
will add yet another condition to this.
There is an additional failure path I didn't account for in my previous
work. While I ensured that a late hwdec failure in receive_frame can be
recovered from by trying the next hwdec, there is a specific
combination where if an hwdec fails in receive_frame, and the next
hwdec is a full decoder (eg: v4l2m2m), and that also fails, we are left
with no decoder and so the entire decoding process ends and playback is
stopped.
Basically, we must keep re-attempting the fallback in receive_frame
until we get a valid decoder (software or hardware). This edge case
will rarely be encountered as there are only a couple of decoder based
hwdecs.
Fixes#11947
I don't know why we've been doing this wrong for so long or how I didn't
notice until now. Wayland specifically has an event for handling
modifiers. We even named it "keyboard_handle_modifiers" in the code.
What we should do is just get the modifier and save it after the xkb
state is updated. Then later if the user does something else (press
another key or clicks the mouse button), the saved modifier key is
applied. If you let go of the modifier at any point, the xkb will just
update its state again and we save a 0 again here (i.e. no modifier).
There is one bit of an edge case however. If a key is pressed BEFORE the
modifier, then we have to handle the mp_input_put_key in the modifier
event instead since the ordering is not guarenteed. What we do here is
keep track of the mpkey as well as the mpmod. However if we are unable
to find a matching mpkey and the key state is pressed down, assume it's
a modifery key that was pressed and don't update mpkey. That way
whenever the modifier event does happen, it can correctly handle this
and we know that the keys must be pressed down if we end up there in the
code path.
As another fun historical note, the xkb_keysym_to_utf8 line was actually
written by wm4 himself in 460ef9c7a4
nearly 10 years ago. As the commit shows, it was clearly intended to
handle modifiers (if lookupkey finds nothing, then try to find a mod
instead). Of course, this is extremely dated and wayland hasn't worked
like that in ages. This branch never actually did anything, and thus
we'll remove it here along with modifier lookup changes.
This solves bizarre issues with modifiers not working with random keys
while working fine with others (don't ask me why). Fixes#10286 and
fixes#11945.
828dd65ef8 started this and put it in the
most common place, but any resize mpv is doing should be accompanied by
that function call to correctly inform the compositor of the window
bounds. Since we also have to set VO_EVENT_RESIZE at the same time, it
makes sense to just put these in the same function. A slight thing to
note is that xdg_surface_set_window_geometry uses surface local
coordinates which means they are divided by the wl->scaling factor. If
possible, we should use surface local coordinates directly if available
(like in the toplevel config) to avoid potential rounding errors.
Otherwise, just calculate it out. The linked commit actually broke
some weston resizes in weird ways (window disappearing or completely
freezing). Don't ask me why and I didn't attempt to find out why either,
but with this it all appears to work normally again (the other
compositors don't appear to be any different, and they shouldn't be), so
we'll go with this since it fixes soemthing and it also is more
conceptually correct.
To remain consistent with our belief that `auto-safe` should be the
recommended mode when turning on hw decoding, let's remap `yes` from
`auto` to `auto-safe`.
We have supported `hwdec=drm` for some time now, and on devices where
this method is present, it is the preferred, and only, method
available. Combine that with the fact that software decoding on
embedded devices will not turn out well, and it's clear that we should
put `drm` and `drm-copy` on the `auto-safe` list to maximise usability
in simple configurations.
Today, if hwdec initialisation succeeds, we move on to attempting
decoding, and if decoding fails, we enter a fallback path that will
only do software decoding.
This is suboptimal because some hwdecs and codec combinations can
pass hwdec init, but then fail at hwaccel init, or even frame decoding.
In these situations, we will never attempt other hwdecs in the `auto`
or manually specified lists which might work.
One good example is someone tries to use `vulkan,auto` and tries to
play av1 content. The vulkan decoding will fail at hwaccel init time,
and then fallback to software instead of going through the auto list
which would allow vaapi, nvdec, etc to play the file.
Instead, let's not give up immediately, and try the next hwdec after
a failure, just like we do if hwdec init fails.
The key part of this change is to keep track of the hwdecs we have
tried, so that each time we run through hwdec selection, we don't try
the same one over and over again. If we really get through the whole
list with no success, we will then fall back to software decoding.
Fixes#11865
This was never implemented so in cases where the compositor didn't have
support for the underlying format, the window would just be black and
quite unhelpful. Well it turns out that fixing this is actually really
easy because mpv has reconfig2 which returns the entire mp_image on
every reconfig. We can just use that mp_image to try and obtain the
format and modifier pair and then use that to check against what we know
the compositor supports. If there are any problems, error out
gracefully. Some code duplication with the vaapi/drmprime importers, but
it's probably better to keep these separate. Fixes#11198 and fixes#11664
It makes more sense as an option at this point. Also libdrm is not
optional at all. You have to get a drm format and modifier for this to
even work (the VO will just fail without DRM). Just hard require it and
remove the guards. vaapi can remain optional.
mpv has never used this because we never really seemed to need it, but
it actually has a purpose. This informs the compositor of the actual
dimensions of the mpv window and avoids errors with sizes not matching
(particularly with weston). It's a better way to fix the "maximizing
causing an error on weston" issue since it also works for dmabuf-wayland
(which always had this problem).
The original reason for this commit was to prevent a compositor error on
weston when going into the maximized state. The configured dimensions of
mpv didn't match its actual size and Weston is super strict about this
so it threw a compositor error which is fatal. It only happened in
opengl and this seemed like an OK workaround, so I went with this.
However, there's actually a far easier way to solve this problem and we
don't need this anymore. This has the benefit of avoiding a harmless
warning message that appears with gpu-next on opengl. The next commit is
the proper solution. Closes#10324.
This reverts commit 661b5542de.
The implementation was copied from vo_gpu/vo_gpu_next but fundamentally
it doesn't make sense for this VO. Hardware decoding is not optional in
vo_dmabuf_wayland. We should be sure to request and load all supported
formats in the preinit and fail if there are any problems. There should
be no functional change from before, but it's more conceptually correct
this way.
This adds osd support via shm buffers using a similar approach that the
normal buffers do, but it differs in a few key areas. One thing to note
is that sway and weston actually handle this extremely differently which
required all the abstractions here. In particular, weston does not cope
well with destroying the wl_buffer from shm outside of the release
handler at all (i.e. it segfaults). The workaround here is to simply
attach a NULL to the osd surface and do a surface commit before we
destroy the buffers. This is reasonable enough and seems to work well
although it's pretty weird. Sway is more straightforward although it
actually releases the osd buffer when the window goes out of sight.
Also, I found that it doesn't always release every buffer before you
close it unlike weston seems to do which is part of the reason all this
bookkeeping is required. I don't know if there's any other compositor
out there that can possibly handle vo_dmabuf_wayland right now, but
suffering through these two is good enough for now I think.
Otherwise, we could fail and skip to uninit without initalizing this
which then will segfault because the list is null and accessed while
trying to destroy buffers.
It's entirely pointless. Not having viewport is already a fatal error
for this VO as it cannot possibly work without that protocol. Just drop
all these redundant if's.
make sure that fwrite is error checked. and if any data was still
remaining on the buffer, it will be flushed - and errors checked - via
the fclose() call below.
mpv already guesses when the window is hidden so plugging in a proper
event that actually tells us this is really trivial. Note that there's
some redundancy with setting wl->hidden in a few spots, but nothing can
really be done about that as long as the crappy hack is still in place.
This protocol no longer requires us to draw a separate cursor surface
and all of that horrible stuff. We can just ask the compositor for the
default cursor instead since that's literally all mpv cares about.
In case there are no packets from demuxer we cannot send EAGAIN, because
we will not proceed and get stuck with one frame in queue and never
output it. Just respect avcodec_receive_frame ret code and act
accordingly. The only case to care about is EOF when we have to drain
already queued frames.
Fixes playback of 1-2 frame videos.
It can happen during initialization and of course nothing good will
happen if we let this go through (i.e. segfault). Return and wait for
geometry to finish setting up in the wayland stuff before doing the
initial resize.
Very dumb. I can't remember if it was always like this or if I broke it
at some point, but clearly each wl_output should just be freed in
remove_output. Freeing it if it happens to be wl->current_output only
works for that one monitor, so remove that whole line. This has to
happen before we close the wayland connection so reorder the uninit a
little bit.
--no-config should prevent loading user files of any type: configs,
cache, etc. For cache files, this case wasn't properly handled and it
was assumed they would always get something. vo_gpu's shader cache
actually already handles this, so it was left untouched. In theory,
demuxer cache should never have this issue because saving it to disk is
disabled by default (and likely that will never change), but go ahead
and change it for consistency's sake. Fixes some segfaults with
--no-config and various combinations of settings (particularly
--vo=gpu-next).
4502522a7a changed the way mpv handled and
saved cached files. In particular, it made a separate boolean option for
actually enabling cache and left the *-dir options as purely just a path
(i.e. having a dir set didn't mean you save cache). This technically
regressed people's configs, so let's just turn the cache on by default.
Linux users already expect random stuff in ~/.cache and well everyone
else can just live with some files possibly appearing in their config
directory.
