I hate tabs.
This replaces all tabs in all source files with spaces. The only
exception is old-makefile. The replacement was made by running the
GNU coreutils "expand" command on every file. Since the replacement was
automatic, it's possible that some formatting was destroyed (but perhaps
only if it was assuming that the end of a tab does not correspond to
aligning the end to multiples of 8 spaces).
This commit adds support for automatic selection of color profiles based on
the display where mpv is initialized, and automatically changes the color
profile when display is changed or the profile itself is changed from
System Preferences.
@UliZappe was responsible with the testing and implementation of a lot of this
commit, including the original implementation of `cocoa_get_icc_profile_path`
(See #594).
Fixes#594
Reduce most dependencies on struct mp_csp_details, which was a bad first
attempt at dealing with colorspace stuff. Instead, consistently use
mp_image_params.
Code which retrieves colorspace matrices from csputils.c still uses this
type, though.
The main difference between the old and new callbacks is that the old
callbacks required passing the window size, which is and always was very
inconvenient and confusing, since the window size is already in
vo->dwidth and vo->dheight.
Rename vo_get_src_dst_rects() to mp_get_src_dst_rects() and make it
independent from the VO (it takes a comical amount of parameters now to
pass all required state). Add a convenience wrapper with the name
vo_get_src_dst_rects() to vo.c. Replace all aspdat and vo usages with
immediate parameters.
Functionally, nothing should change, except that the window size is
clamped to a minimum of size 1 much earlier, and some log messages
change the prefix (don't bother with vo.vo_log stuff).
For some reason, this made all VO backends both set the screen
resolution in opts->screenwidth/height, and call
aspect_save_screenres(). Remove the latter. Move the code to calculate
the PAR-corrected window size from aspect.c to vo.c, and make it so that
the monitor PAR is recalculated when it makes sense.
How embarrassing...
This code is inactive for all VOs other than vo_vdpau. For vo_vdpau,
this caused various issues, such as stuttering after about an hour of
running mpv; see github issue #403.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
Keep track of the default values directly, instead of creating a new
instance of the option struct just to get the defaults.
Also get rid of the special handling of m_obj_desc.init_options.
Instead, handle it purely by the option parser. Originally, I wanted to
handle --vo=opengl-hq and --vo=direct3d_shaders with this (by making
them aliases to the real VOs with a different preset), but since --vo
=opengl-hq=help prints the wrong values (as consequence of the
simplification), I'm not doing that, and instead use something
different.
This commit adds the --force-window option, which will cause mpv always
to create a window when started. This can be useful when pretending that
mpv is a GUI application (which it isn't, but users pretend anyway), and
playing audio files would run mpv in the background without giving a
window to control it.
This doesn't actually create the window immediately: it only does so
only after initializing playback and when it is clear that there won't
be any actual video. This could be a problem when starting slow or
completely stuck network streams (mpv would remain frozen in the
background), or if video initialization somehow is stuck forever in
an in-between state (like when the decoder doesn't output a video
frame, but doesn't return an error either). Well, we can pretend only
so much that mpv is a GUI application.
This is supposed to reduce the amount of useless error messages shown
during initialization of vo_opengl. If multiple backends are compiled,
usually only one of them will work. For example, on Linux both X and
Wayland backends can be compiled, but usually either Wayland or X is
running. Then, if Wayland is not running, but X is, trying to initialize
the Wayland backend should not spam the terminal with error messages.
Signed-off-by: Andreas Sinz <andreas.sinz@aon.at>
This is based on the MPlayer VA API patches. To be exact it's based on
a very stripped down version of commit f1ad459a263f8537f6c from
git://gitorious.org/vaapi/mplayer.git.
This doesn't contain useless things like benchmarking hacks and the
demo code for GLX interop. Also, unlike in the original patch, decoding
and video output are split into separate source files (the separation
between decoding and display also makes pixel format hacks unnecessary).
On the other hand, some features not present in the original patch were
added, like screenshot support.
VA API is rather bad for actual video output. Dealing with older libva
versions or the completely broken vdpau backend doesn't help. OSD is
low quality and should be rather slow. In some cases, only either OSD
or subtitles can be shown at the same time (because OSD is drawn first,
OSD is prefered).
Also, libva can't decide whether it accepts straight or premultiplied
alpha for OSD sub-pictures: the vdpau backend seems to assume
premultiplied, while a native vaapi driver uses straight. So I picked
straight alpha. It doesn't matter much, because the blending code for
straight alpha I added to img_convert.c is probably buggy, and ASS
subtitles might be blended incorrectly.
Really good video output with VA API would probably use OpenGL and the
GL interop features, but at this point you might just use vo_opengl.
(Patches for making HW decoding with vo_opengl have a chance of being
accepted.)
Despite these issues, decoding seems to work ok. I still got tearing
on the Intel system I tested (Intel(R) Core(TM) i3-2350M). It was also
tested with the vdpau vaapi wrapper on a nvidia system; however this
was rather broken. (Fortunately, there is no reason to use mpv's VAAPI
support over native VDPAU.)
Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This
file is named so because because it's written against the "old"
libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau").
Add support for the "new" libavcodec vdpau support. This was recently
added and replaces the "old" vdpau parts. (In fact, Libav is about to
deprecate and remove the "old" API without deprecation grace period,
so we have to support it now. Moreover, there will probably be no Libav
release which supports both, so the transition is even less smooth than
we could hope, and we have to support both the old and new API.)
Whether the old or new API is used is checked by a configure test: if
the new API is found, it is used, otherwise the old API is assumed.
Some details might be handled differently. Especially display preemption
is a bit problematic with the "new" libavcodec vdpau support: it wants
to keep a pointer to a specific vdpau API function (which can be driver
specific, because preemption might switch drivers). Also, surface IDs
are now directly stored in AVFrames (and mp_images), so they can't be
forced to VDP_INVALID_HANDLE on preemption. (This changes even with
older libavcodec versions, because mp_image always uses the newer
representation to make vo_vdpau.c simpler.)
Decoder initialization in the new code tries to deal with codec
profiles, while the old code always uses the highest profile per codec.
Surface allocation changes. Since the decoder won't call config() in
vo_vdpau.c on video size change anymore, we allow allocating surfaces
of arbitrary size instead of locking it to what the VO was configured.
The non-hwdec code also has slightly different allocation behavior now.
Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau
doesn't work anymore (a warning suggesting the --hwdec option is
printed instead).
Nothing should change from user perspective.
mpv --vo=opengl:help now works.
Remove the vo_opengl inline help text. The new code can list option
names for you, but that's it. Refer to the manpage if you have trouble.
There was a MPOpts fullscreen field, a mp_vo_opts.fs field, and
VOFLAG_FULLSCREEN. Remove all these and introduce a
mp_vo_opts.fullscreen flag instead.
When VOs receive VOCTRL_FULLSCREEN, they are supposed to set the
current fullscreen mode to the state in mp_vo_opts.fullscreen. They
also should do this implicitly on config().
VOs which are capable of doing so can update the mp_vo_opts.fullscreen
if the actual fullscreen mode changes (e.g. if the user uses the
window manager controls). If fullscreen mode switching fails, they
can also set mp_vo_opts.fullscreen to the actual state.
Note that the X11 backend does almost none of this, and it has a
private fs flag to store the fullscreen flag, instead of getting it
from the WM. (Possibly because it has to deal with broken WMs.)
The fullscreen option has to be checked on config() to deal with
the -fs option, especially with something like:
mpv --fs file1.mkv --{ --no-fs file2.mkv --}
(It should start in fullscreen mode, but go to windowed mode when
playing file2.mkv.)
Wayland changes by: Alexander Preisinger <alexander.preisinger@gmail.com>
Cocoa changes by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
This was bad, because it was the only aspdat member updated by
vo_get_src_dst_rects() instead of vo_reconfig(). Now it isn't
accessed anymore, so remove it.
For some reason mp_fifo specifically handled double clicks, and other
than that was a pointless wrapper around input.c functionality.
Move the double click handling into input.c, and get rid of mp_fifo. Add
some compatibility wrappers, because so much VO code uses these
functions. Where struct mp_fifo is still used it's just a casted
struct input_ctx.
Before this commit, mouse movement events emitted a special command
("set_mouse_pos"), which was specially handled in command.c. This was
once special-cased to the dvdnav and menu code, and did nothing after
libmenu and dvdnav were removed.
Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"),
which then can be bound to an arbitrary command. The mouse position is
now managed in input.c. A command which actually needs the mouse
position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos()
to query it. The former returns raw window-space coordinates, while the
latter returns coordinates transformed to OSD- space. (Both are the same
for most VOs, except vo_xv and vo_x11, which can't render OSD in
window-space. These require extra code for mapping mouse position.)
As of this commit, there is still nothing that uses mouse movement, so
MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the
mouse (much like MOUSE_BTN0).
Extend the concept of input sections. Allow multiple sections to be
active at once, and organize them as stack. Bindings from the top of
the stack are preferred to lower ones.
Each section has a mouse input section associated, inside which mouse
events are associated with the bindings. If the mouse pointer is
outside of a section's mouse area, mouse events will be dispatched to
an input section lower on the stack of active sections. This is intended
for scripting, which is to be added later. Two scripts could occupy
different areas of the screen without conflicting with each other. (If
it turns out that this mechanism is useless, we'll just remove it
again.)
The filter chain and the video ouputs have config() functions. They are
strictly limited to transfering the video size and format. Other
parameters (like color levels) have to be transferred separately.
Improve upon this by introducing a separate set of reconfig() functions,
which use mp_image_params to carry format parameters. This struct
contains all image format related parameters from config(), plus
additional parameters such as colorspace.
Change vf_rotate to use it, as well as vo_opengl. vf_rotate is just
an example/test case, but vo_opengl will need it later.
The intention is also to get rid of VOCTRL_SET_YUV_COLORSPACE. This
information is now handed to the VOs via reconfig(). The getter,
VOCTRL_GET_YUV_COLORSPACE, will still be needed though.
Instead of implicitly changing the window title on config(), do it as
part of the new VOCTRL.
At first I wanted to make all VOs use the VOCTRL argument directly, but
on a second thought it appears vo_get_window_title() is much more useful
for some (namely, if the window is created lazily on first config()).
Not all VOs are changed. Wayland and OSX have to follow.
This make the intention more apparent, and some VOs are actually using
true instead of VO_TRUE in some places. Hopefully this changes makes it
less confusing (instead of more).
The C99 constants true/false are defined to 1/0 as well, so this commit
doesn't actually change anything.
This is slightly better because VOCTRL_RESUME/VOCTRL_PAUSE are usually
needed by VOs to know whether video is actually being played (for
whatever reason), and they wouldn't be passed to the backend's VOCTRL
handler, like vo_x11_control().
Also try to make sure that these flags (both pause state and screensaver
state) are set consistently in some corner cases. For example, it seems
enabling video in the middle of playing a file while the player is
paused would not set the paused flag.
If codec initialization fails, destroy the VO instead of keeping it
around to make sure the state is consistent.
Framestepping is implemented by unpausing the player for the duration of
a frame. Remove the special handling of VOCTRL_PAUSE/RESUME in these
cases. It was most likely needed because these VOCTRLs used to be
important for screen redrawing (blatant guess), which is now handled
completely differently. The only potentially bad side-effect is that the
screensaver will be disabled/reenabled for the duration of one frame.
GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
This was used by some VOs to do timing of cursor autohiding, but we
recently moved that out of the VOs. Even though this mechanism might
be a good idea and could be needed again in future (but for what?),
it's unused now. So better just get rid of it.
Use VOCTRL_CHECK_EVENTS instead. Change the remaining VOs to use it.
Only vo_sdl and vo_caca actually need this, and vo_null, vo_lavc, and
vo_image had stubs only.
Instead of having separate callbacks for each backend-handled feature
(like MPGLContext.fullscreen, MPGLContext.border, etc.), pass the
VOCTRL responsible for this directly to the backend. This allows
removing a bunch of callbacks, that currently must be set even for
optional/lesser features (like VOCTRL_BORDER).
This requires changes to all VOs using gl_common, as well as all
backends that support gl_common.
Also introduce VOCTRL_CHECK_EVENTS. vo.check_events is now optional.
VO backends can use VOCTRL_CHECK_EVENTS instead to implementing
check_events. This has the advantage that the event handling code in
VOs doesn't have to be duplicated if vo_control() is used.
Allows playing video with alpha information on X11, as long as the video
contains alpha and the window manager does compositing. See vo.rst.
Whether a window can be transparent is decided by the choice of the X
Visual used for window creation. Unfortunately, there's no direct way to
request such a Visual through the GLX or the X API, and use of the
XRender extension is required to find out whether a Visual implies a
framebuffer with alpha used by XRender (see for example [1]). Instead of
depending on the XRender wrapper library (which would require annoying
configure checks, even though XRender is virtually always supported),
use a simple heuristics to find out whether a Visual has alpha. Since
getting it wrong just means an optional feature will not work as
expected, we consider this ok.
[1] http://stackoverflow.com/questions/4052940/how-to-make-an-opengl-rendering-context-with-transparent-background/9215724#9215724
gl_video.c contains all rendering code, gl_lcms.c the .icc loader and
creation of 3D LUT (and all LittleCMS specific code). vo_opengl.c is
reduced to interfacing between the various parts.
Remove lots of weird logic and dead code.
The only difference is that when specifying a monitor aspect ratio, it
will always upscale and never downscale.
Separate the video output options from the big MPOpts structure and also only
pass the new mp_vo_opts structure to the vo backend.
Move video_driver_list into mp_vo_opts
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
When paused, --cursor-autohide worked with a precision of 500ms, which
is the main loop's default sleep time when paused. Cursor hiding is
polled in x11_common, and the main loop never called the X11 code at
the right time. Fix this by allowing the VO to set a time when it
should be called next.
Store the window state (position and size) in vo_x11_state, instead of
in vo->dx/dy/dwidth/dheight. The VO variables are overwritten by vo.c on
every vo_config() call, which is extremely not helpful.
Now vo->dx/dy are mostly unused (except for passing the position forced
by the --geometry option), and vo->dwidth/dheight are set for the VO,
and otherwise read for resize detection only.
In the long term, the way vo_config() handles the --geometry option
should be changed, and vo->dx/dy should be removed.
Remove some useless stuff: VO_EVENT_MOVE and VO_EVENT_KEYPRESS were
generated, but unused. Wayland changes by Alexander Preisinger.
It was once used for vo_sdl (the old one based on SDL 1.2), since SDL
apparently lost the GL state when switching to fullscreen. The new
vo_sdl (using SDL 1.3) doesn't use or need this. It's dead code, so
get rid of it.
VFCAP_OSD was used to determine at runtime whether the VO supports OSD
rendering. This was mostly unused. vo_direct3d had an option to disable
OSD (was supposed to allow to force auto-insertion of vf_ass, but we
removed that anyway). vo_opengl_old could disable OSD rendering when a
very old OpenGL version was detected, and had an option to explicitly
disable it as well.
Remove VFCAP_OSD from everything (and some associated logic). Now the
vo_driver.draw_osd callback can be set to NULL to indicate missing OSD
support (important so that vo_null etc. don't single-step on OSD
redraw), and if OSD support depends on runtime support, the VO's
draw_osd should just do nothing if OSD is not available.
Also, do not access vo->want_redraw directly. Change the want_redraw
reset logic for this purpose, too. (Probably unneeded, vo_flip_page
resets it already.)
All wayland only specific routines are placed in wayland_common.
This makes it easier to write other video outputs.
The EGL specific parts, as well as opengl context creation, are in gl_common.
This backend works for:
* opengl-old
* opengl
* opengl-hq
To use it just specify the opengl backend
--vo=opengl:backend=wayland
or disable the x11 build.
Don't forget to set EGL_PLATFORM to wayland.
Co-Author: Scott Moreau
(Sorry I lost the old commit history due to the file structure changes)
