In general, forced tracks should only be shown if they match the
language of the audio. However some people do want them no matter what,
so add an always option to this so such tracks are always selected.
This is the replacement for the previous auto option for slang. It
behaves similar however it never overrides slang if that is set and will
instead try to pick the subtitle that matches the user's language if
appropriately flagged by the file.
What was previously there is extremely complicated and really confusing.
Poorly named variables like "prefer_forced" that don't neccesarily have
anything to do with prefering forced tracks didn't help either. Try to
rewrite a few things to be saner. The idea is that after you loop
through the tracks, the special sub-specific options (like subs-fallback
and so on) should be handled and the track should be deselected if
appropriate. Another change is to remove the "prefered_forced" argument
in compare_track. This actually was both not neccessary and caused bad
behavior by always depriortizing forced tracks even when it didn't apply
(e.g. forced video tracks were never selected even though the flag
should simply be ignored for anything that's not a subtitle track).
This proved to be too problematic. Depending on the value of
--subs-with-matching-audio, you could either end up with cases where
--slang wasn't respected and users didn't get subtitles or alternatively
cases where subtitles were given and the user didn't ask for them.
Fundamentally, the OS language functionality doesn't really map well to
slang (and for alang/vlang it makes zero sense; not that anyone actually
used it). Instead of trying to shove it in an option where it doesn't
belong, we should split this off into something else. So for now, just
remove the special handling of "auto" and flip slang back to NULL.
It turns out that the code to track redirects (playlists and
directories) never worked correctly, only the last redirect is
remembered and num_redirects is never greater than 1.
You can see this by doing quit-watch-later with the old watch later
system, before dbf244fd2f, on a m3u playlist of files and a m3u playlist
of directories. Only in the first case a redirect entry for the m3u file
is created, because in the second case the m3u redirect is replaced by
the directory one.
If you did mpv --directory-mode=lazy /foo it did create redirect entries
for all subdirectories e.g. /foo/bar, /foo/bar/baz, /foo/bar/baz/qux,
this made it seem like it worked correctly, but actually
/foo/bar/bar/qux was the only redirect entry and thus it was considered
as the first redirect, and mpv created redirect entries for each segment
of the first redirect only.
In the previous commit dbf244fd2f, rather than figuring out how to fix
the code to track redirects, and since creating redirect entries for
multiple redirects is overkill, I just used the new playlist-path
property which does the same thing but only for the last redirect.
By replacing the only other use of the old redirect code with
playlist-path, we can remove it.
35f43dfacb added a system to write resume files for redirects, i.e.
directories and playlists that mpv expands.
It creates a resume file for each redirect, and for the first redirect
only, it writes a resume file for each segment of its path, without even
converting it to an absolute path if it's relative. This is incomplete:
mpv 'Iron Maiden/1982 The Number of the Beast/8 Hallowed Be Thy Name.mp3'
This doesn't save any redirect entry.
mpv --directory-mode=recursive 'Iron Maiden', then quit-watch-later on
Hallowed Be Thy Name
This saves a redirect entry for "Iron Maiden", but not for "1982 The
Number of the Beast". It doesn't save redirect entries for the
directories above "Iron Maiden" either because "Iron Maiden" isn't
converted to an absolute path.
In both of these cases mpv --directory-mode=lazy 'Iron Maiden' won't
resume from "Hallowed Be Thy Name" because "1982 The Number of the
Beast" isn't the first subdirectory and there is no redirect entry for
it.
503dada42f made mpv recursively expand subdirectories precisely to fix
this, and f266eadf1e added back an option not to expand them. But if we
fix how redirect entries are stored, we can make the superior
--directory-mode=lazy (because it's faster and doesn't result in massive
playlists) the default, and also ensure that mpv will resume playback
even when you quit-watch-later a file without redirects and then play
the directories above it.
Fix this by always creating redirect entries for all segments of the absolute
path of the file, so that both
mpv 'Iron Maiden/1982 The Number of the Beast/8 Hallowed Be Thy Name.mp3'
and
mpv --directory-mode=lazy 'Iron Maiden'
will create redirect entries for
/$USER
/$USER/music
/$USER/music/Iron Maiden
/$USER/music/Iron Maiden/1982 The Number of the Beast
making mpv --directory-mode=lazy "Iron Maiden" resume from
"Hallowed Be Thy Name".
This commit also makes mpv delete the redirect entries of parent
directories when resuming playback, because if for example you have a
playlist with all the songs in a discography:
1980 Iron Maiden/1 Prowler.mp3
1980 Iron Maiden/2 Remember Tomorrow.mp3
...
1981 Killers/1 The Ides of March.mp3
1981 Killers/2 Wrathchild.mp3
...
Now mpv will eventually create redirect entries for every album. If you
later decide to play the directories instead and there are 20 albums,
you would have to do mpv * 20 times to clear all the redirect entries.
This ensures the spacing between forced-only sub toggle button and the
volume button matches the spacing between the volume and the fullscreen
button on bottombar/topbar layouts
Fixes: 945d7c1eda
Previously, we would have a button with empty string added to the layout
for non DVD/PGS subtitles. This would cause there to be an invisible
button present that would take up space and could still be clicked
despite being invisible when the current subtitle track was not DVD/PGS.
The idea was that the button would be invisible for regular subtitle
tracks, and be visible as "[ ]"/"[F]" for DVD/PGS subtitle tracks.
This commit modifies the bar and box layouts to only add this button if
the current subtitle track is DVD/PGS. This results in there no longer
being an invisible button, and also prevents it from taking up space.
The button is added to layout as before when the current subtitle track
is DVD/PGS, matching the same logic as before.
--audio-file-auto, --cover-art-auto, and --sub-auto all work by using an
internally hardcoded list that determine what file extensions get
recognized. This is fine and people periodically update it, but we can
actually expose this as a stringlist option instead. This way users can
add or remove any file extension for any type. For the most part, this
is pretty pretty easy and involves making sub_exts, etc. the defaults
for the new options (--audio-file-auto-exts, --cover-art-auto-exts, and
--sub-auto-exts). There's actually one slight complication however. The
input code uses mp_might_be_subtitle_file which guesses if the file drag
and dropped file is a subtitle. The input ctx has no access to mpctx so
we have to be clever here.
For this, the trick is to recognize that we can leverage the
m_option_change_callback. We add a new flag, UPDATE_SUB_EXTS, which
fires when the player starts up. Then in the callback, we can set the
value of sub_exts in external_files to opts->sub_auto_exts. Whenever the
option updates, the callback is fired again and sub_exts updates. That
way mp_might_be_subtitle_file can just operate off of this global
variable instead of trying to mess with the core mpv state directly.
Fixes#12000.
We should account for ao queue when setting playback position on EOF,
previously we were using the pts value corresponding to the start of
the ao queue, rather than the currently playing audio.
This fixes time-remaining being a negative number when mpv seeks to EOF
while playback is paused.
There are a number of ways one can craft a playlist file that refers to
itself or cleverly goes around in a loop to other playlist files. There
is obviously no use for this, but mpv spins around forever trying to
load the files so you have to just SIGTERM/SIGKILL it. We can be smarter
about this and attempt to detect it. The condition for detecting this is
surprisingly simple: the filename of the first entry in the playlist
must match a previous playlist path we stored. If we get this, we can
then log an error and stop playback. If there is a "real" file loaded at
any point in time, then we know it's not an infinite loop and clear out
the saved playlist paths. Fixes#3967.
A bit of a long standing pain with scripting is that when opening a file
that gets interpreted as a playlist (like an m3u), the original path of
the file gets thrown away later. Workarounds basically consist of
getting the filename before mpv expands the path, but that's not really
reliable. Instead of throwing it away, save the original playlist path
by copying to the playlist entries when applicable (demuxer playlist and
the playlist option). Then expose these as properties: playlist-path for
the currently playing entry and playlist/N/playlist-path for each
specific entry. Closes#8508, #7605.
The OSC reports the speed-adjusted remaining time, but the terminal does
not. This is a weird mismatch and the OSC's default behavior makes
sense, so let's just do some division and add an option to disable it.
Also named "remaining-playtime" after the OSC option. Fixes#10445.
mpv makes this option an integer, but the underlying ass API actually
accepts doubles. From some testing, there is no meaningful precision
difference between float or double (it seems to go in roughly 0.05
steps), so just make it a float. sd_lavc also can handle non-integer
values here. Closes#11583.
When printing the name of the video track on the OSC, mpv almost always
prefixes it with "unknown". This is referring to the language tag which
essentially nobody ever does for the video track since it doesn't make
any sense. Instead of putting unknown when there's no language, just
make it an empty string instead. "Unknown" confuses can confuse users
here and practically nobody would guess that it's referring to language.
We still will print the language for a video track in case someone out
there really does tag it, but that should be rare.
When playing a sparse video stream, the debug log gets hit with the
video EOF constantly since the audio is still playing. There's no
practical use for this so just do add some logic to only signal it once
if it is sparse.
There's an edge cause with gapless audio and pausing. Since, gapless
audio works by sending an EOF immediately, it's possible to pause on the
next file before audio actually finishes playing and thus the sound gets
cut off. The fix is to simply just always do an ao_drain if the ao is
about to set a pause on EOF and we still have audio playing.
Fixes#8898.
This is pretty obscure but if you screw around with the play-dir option
to essentially create a ping-pong loop; mpv will get hit by an assertion
error. What's happening here is that changing the play-dir always
requires a seek. This is handled in player/command along with the other
runtime option changes. However, queue_seek can actually clear the value
of mpctx->stop_play if the file is ending. So while loadfile is
terminating playback and the play-dir gets changed, the value of
mpctx->stop_play gets cleared because of seek. This then hits that
assertion later when mpv tries to finish the file.
The fix is to just add some weird logic to play-dir in player/command.
We have to be sure that mpctx->play_dir matches the new direction
immediately when we get the change so explictly set it here and don't
wait for it later. Secondly, keep the old value of mpctx->stop_play
before the seek and restore it afterwards. This ensures that termination
still happens cleanly and allows the ping-pong loop to work. Fixes#10782
Internal subtitles were not shown when switching between tracks while
mpv was paused. The reason for this is simply because the demuxer data
isn't available yet when the track switch happens. Fixing it is
basically just retrying until the packet is actually available when the
player is paused. Fixes#8311.
1df0a42a8c changed aspect-ratio from
floats to doubles, but forgot to change this function for
pretty-printing them as fractions for the video-aspect-override property
This only existed as essentially a workaround for meson's behavior and
to maintain compatibility with the waf build. Since waf put everything
in a generated subdirectory, we had to put make a subdirectory called
"generated" in the source for meson so stuff could go to the right
place. Well now we don't need to do that anymore. Move the meson.build
files around so they go in the appropriate place in the subdirectory of
the source tree and change the paths of the headers accordingly. A
couple of important things to note.
1. mpv.com now gets made in build/player/mpv.com (necessary because of
a meson limitation)
2. The macos icon generation path is shortened to
TOOLS/osxbundle/icon.icns.inc.
The track during lavfi-complex can actually be NULL which meant that
ca4192e2df regressed lavfi-complex by
causing mpv to crash during runtime changes of the filter. Additionally,
it's possible for the decoder wrapper to also be NULL. check_framedrop
within write_video checks this, but check_for_hwdec_fallback does not.
Perhaps, it's impossible for this to happen, but we might as well add
the check here to be on the safe side since mp_decoder_wrapper_control
is not designed to handle a NULL.
It's a bit of an edge case, but since we now allow the disabling of the
software fallback it's possible to have a situation where hwdec
completely fails and the mpv window is still lingering from the previous
item in the playlist. What needs to happen is simply that the vo_chain
should uninit itself and handle force_window if needed. In order to do
that, a new VDCTRL is added that checks vd_lavc if force_eof was set.
player/video will then start the uninit process if needed after getting
this.
Currently, the osc will add a margin of (osc_height / 2) to the
deadzonesize for the window controls, the topbar and the bottombar,
i.e. when osc-deadzonesize=1, the osc will show up even if the cursor
is only hovering (osc_height / 2) pixels above or below it. This is not
what this option is supposed to do according to the manual, instead
osc-deadzonesize=1 should result in the osc only appearing when it is
directly hovered. The user can simply set osc-deadzonesize=0.9 or so if
such a margin is desired, instead make the option work as advertised by
removing this margin.
It should be noted that osc-layout=box does not share this behavior,
and it already works as advertised in the manual.
mpv already has a bunch of software scaling utils. Instead of forcing
every VO to implement this, we can just grab the frame and scale it in
software in one central place. Fixes#11968.
We should always be trying hardware screenshots (VOCTRL_SCREENSHOT and
VOCTRL_SCREENSHOT_WIN) before software ones. Rearrange all the logic
here to hopefully make this clearer. The mode is passed to add_osd
(renamed since it will also be used to add the osd) which will be used
more in the next commit.
When using lavfi-complex, no single track populates current_track for audio.
We work around this by iterating over the list of tracks and using the first
non-null language from a selected track. If multiple tracks are selected
(i.e. used by the filter) and have conflicting language tags, we'll ignore
them all and maintain the previous behavior (null).
6a365b258a broke deleting redirect entries for resuming playback. If you
do mpv dir1 dir2, quit-watch-later on a file in dir1, then later
quit-watch-later on a file in dir2, mpv dir1 dir2 would not resume from
dir2 because the redirect entry for dir1 is never deleted.
Fix this by deleting watch later config files for directory/playlist
entries.
Currently, mpv immediately deletes the watch_later file after an attempt
at playing the file is made. This is not really ideal because the file
may fail to load for a variety of reasons (including not even existing),
but the state is cleared anyway unconditionally. Instead, just wait
until after playback is successfully initialized before deleting it.
This way silly mistakes like forgetting to mount the drive doesn't
result in deleting your watch_later data. Fixes#3427.
in the first iteration, *out will be null and thus the steal and the
strdup both sets the parent to NULL - leaking the allocation later on
(caught via LeakSanitizer).
let append_lang() take care of setting the parent instead.
