RepoMirrors/mpv
1
0
Fork 0
mirror of https://github.com/mpv-player/mpv synced 2024-12-26 00:42:57 +00:00
Code Issues Releases Wiki Activity
69283bc0f8
mpv/player/playloop.c

1098 lines
34 KiB
C
Raw Normal View History

Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
/*
Update license headers Signed-off-by: wm4 <wm4@nowhere>
2015-04-13 07:36:54 +00:00
* This file is part of mpv.
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
*
Update license headers Signed-off-by: wm4 <wm4@nowhere>
2015-04-13 07:36:54 +00:00
* mpv is free software; you can redistribute it and/or modify
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
Update license headers Signed-off-by: wm4 <wm4@nowhere>
2015-04-13 07:36:54 +00:00
* mpv is distributed in the hope that it will be useful,
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
Update license headers Signed-off-by: wm4 <wm4@nowhere>
2015-04-13 07:36:54 +00:00
* with mpv. If not, see <http://www.gnu.org/licenses/>.
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
*/
#include <stddef.h>
#include <stdbool.h>
#include <inttypes.h>
#include <math.h>
#include <assert.h>
#include "config.h"
mpv_talloc.h: rename from talloc.h This change helps avoiding conflict with talloc.h from libtalloc.
2016-01-11 18:03:40 +00:00
#include "mpv_talloc.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
Split mpvcore/ into common/, misc/, bstr/
2013-12-17 01:39:45 +00:00
#include "common/msg.h"
Move options/config related files from mpvcore/ to options/ Since m_option.h and options.h are extremely often included, a lot of files have to be changed. Moving path.c/h to options/ is a bit questionable, but since this is mainly about access to config files (which are also handled in options/), it's probably ok.
2013-12-17 01:02:25 +00:00
#include "options/options.h"
Split mpvcore/ into common/, misc/, bstr/
2013-12-17 01:39:45 +00:00
#include "common/common.h"
#include "common/encode.h"
Move options/config related files from mpvcore/ to options/ Since m_option.h and options.h are extremely often included, a lot of files have to be changed. Moving path.c/h to options/ is a bit questionable, but since this is mainly about access to config files (which are also handled in options/), it's probably ok.
2013-12-17 01:02:25 +00:00
#include "options/m_property.h"
Split mpvcore/ into common/, misc/, bstr/
2013-12-17 01:39:45 +00:00
#include "common/playlist.h"
Move mpvcore/input/ to input/
2013-12-17 00:23:09 +00:00
#include "input/input.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
dispatch: move into its own source file This was part of osdep/threads.c out of laziness. But it doesn't contain anything OS dependent. Note that the rest of threads.c actually isn't all that OS dependent either (just some minor ifdeffery to work around the lack of clock_gettime() on OSX).
2014-04-23 18:37:57 +00:00
#include "misc/dispatch.h"
Rename getch2....c/h to terminal....c/h "getch2" really tells nothing about what the heck this code does. It'd be even worse when moving the rest of terminal handling code there.
2013-12-19 20:31:27 +00:00
#include "osdep/terminal.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
#include "osdep/timer.h"
#include "audio/decode/dec_audio.h"
#include "audio/filter/af.h"
#include "audio/out/ao.h"
#include "demux/demux.h"
#include "stream/stream.h"
Rename sub.c/.h to osd.c/.h This was way too misleading. osd.c merely calls the subtitle renderers, instead of actually dealing with subtitles.
2013-11-24 11:58:06 +00:00
#include "sub/osd.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
#include "video/filter/vf.h"
#include "video/decode/dec_video.h"
#include "video/out/vo.h"
Rename mp_core.h to core.h Get rid of the mp_ prefix.
2013-12-17 00:08:53 +00:00
#include "core.h"
player: update cache state only if requested Add a mechanism to the client API code, which allows the player core to query whether a client API event is needed at all. Use it for the cache update. In this case, this is probably a pure microoptimization; but the mechanism will be useful for other things too.
2014-08-28 15:35:50 +00:00
#include "client.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
#include "command.h"
player: minor refactoring Expose the central event handling functions explicitly, so that other parts of the player can use them. No functional changes. Preparation for the next commit.
2014-09-06 14:57:46 +00:00
// Wait until mp_input_wakeup(mpctx->input) is called, since the last time
// mp_wait_events() was called. (But see mp_process_input().)
void mp_wait_events(struct MPContext *mpctx, double sleeptime)
{
player: some more input refactoring Continues commit 348dfd93. Replace other places where input was manually fetched with common code. demux_was_interrupted() was a weird function; I'm not entirely sure about its original purpose, but now we can just replace it with simpler code as well. One difference is that we always look at the command queue, rather than just when cache initialization failed. Also, instead of discarding all but quit/playlist commands (aka abort command), run all commands. This could possibly lead to unwanted side-effects, like just ignoring commands that have no effect (consider pressing 'f' for fullscreen right on start: since the window is not created yet, it would get discarded). But playlist navigation still works as intended, and some if not all these problems already existed before that in some forms, so it should be ok.
2014-09-07 18:44:54 +00:00
mp_input_wait(mpctx->input, sleeptime);
player: minor refactoring Expose the central event handling functions explicitly, so that other parts of the player can use them. No functional changes. Preparation for the next commit.
2014-09-06 14:57:46 +00:00
}
// Process any queued input, whether it's user input, or requests from client
// API threads. This also resets the "wakeup" flag used with mp_wait_events().
void mp_process_input(struct MPContext *mpctx)
{
player: some more input refactoring Continues commit 348dfd93. Replace other places where input was manually fetched with common code. demux_was_interrupted() was a weird function; I'm not entirely sure about its original purpose, but now we can just replace it with simpler code as well. One difference is that we always look at the command queue, rather than just when cache initialization failed. Also, instead of discarding all but quit/playlist commands (aka abort command), run all commands. This could possibly lead to unwanted side-effects, like just ignoring commands that have no effect (consider pressing 'f' for fullscreen right on start: since the window is not created yet, it would get discarded). But playlist navigation still works as intended, and some if not all these problems already existed before that in some forms, so it should be ok.
2014-09-07 18:44:54 +00:00
mp_dispatch_queue_process(mpctx->dispatch, 0);
for (;;) {
mp_cmd_t *cmd = mp_input_read_cmd(mpctx->input);
if (!cmd)
break;
client API: add glue for making full use of mpv_command_node() Until now, the return value was always MPV_FORMAT_NONE. Now a command can actually set it. This will be used in one of the following commits.
2015-04-20 21:00:12 +00:00
run_command(mpctx, cmd, NULL);
player: minor refactoring Expose the central event handling functions explicitly, so that other parts of the player can use them. No functional changes. Preparation for the next commit.
2014-09-06 14:57:46 +00:00
mp_cmd_free(cmd);
player: some more input refactoring Continues commit 348dfd93. Replace other places where input was manually fetched with common code. demux_was_interrupted() was a weird function; I'm not entirely sure about its original purpose, but now we can just replace it with simpler code as well. One difference is that we always look at the command queue, rather than just when cache initialization failed. Also, instead of discarding all but quit/playlist commands (aka abort command), run all commands. This could possibly lead to unwanted side-effects, like just ignoring commands that have no effect (consider pressing 'f' for fullscreen right on start: since the window is not created yet, it would get discarded). But playlist navigation still works as intended, and some if not all these problems already existed before that in some forms, so it should be ok.
2014-09-07 18:44:54 +00:00
mp_dispatch_queue_process(mpctx->dispatch, 0);
player: minor refactoring Expose the central event handling functions explicitly, so that other parts of the player can use them. No functional changes. Preparation for the next commit.
2014-09-06 14:57:46 +00:00
}
client API: implement mpv_suspend/resume slightly differently Why do these API calls even still exist? I don't know, and maybe they don't make any sense anymore. But whether they should be removed or not is not a decision I want to make now. I want to get rid of mp_dispatch_suspend/resume(), though. So implement the client APIs slightly differently.
2016-09-04 13:43:12 +00:00
while (mpctx->suspend_count)
mp_dispatch_queue_process(mpctx->dispatch, 100);
player: minor refactoring Expose the central event handling functions explicitly, so that other parts of the player can use them. No functional changes. Preparation for the next commit.
2014-09-06 14:57:46 +00:00
}
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
double get_relative_time(struct MPContext *mpctx)
{
int64_t new_time = mp_time_us();
int64_t delta = new_time - mpctx->last_time;
mpctx->last_time = new_time;
return delta * 0.000001;
}
client API: remove mpv_event_pause_reason And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE. The real pause state can now be queried with the "core-idle" property, the user pause state with the "pause" property, whether the player is paused due to cache with "paused-for-cache", and the keep open event can be guessed with the "eof-reached" property.
2014-04-14 20:33:41 +00:00
void pause_player(struct MPContext *mpctx)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
mpctx->opts->pause = 1;
if (mpctx->video_out)
vo_control(mpctx->video_out, VOCTRL_RESTORE_SCREENSAVER, NULL);
if (mpctx->paused)
client API: report pause/unpause reason Not sure about this... might redo. At least this provides a case of a broadcasted event, which requires per-event data allocation. See github issue #576.
2014-02-24 21:49:07 +00:00
goto end;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->paused = true;
mpctx->step_frames = 0;
mpctx->time_frame -= get_relative_time(mpctx);
mpctx->osd_function = 0;
player: rate-limit OSD text update There's no need to update OSD messages and the terminal status if nobody is going to see it. Since the player doesn't block on video display anymore, this update happens to often and probably burns slightly more CPU than necessary. (OSD redrawing is handled separately, so it's just mostly useless text processing and such.) Change it so that it's updated only on every video frame or all 50ms (whatever comes first). For VO OSD, we could in theory try to lock to the OSD redraw heuristic or the display refresh rate, but that's more complicated and doesn't work for the terminal status.
2014-09-25 18:25:24 +00:00
mpctx->osd_force_update = true;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->paused_for_cache = false;
player: refactor: eliminate MPContext.d_audio
2016-01-21 21:24:20 +00:00
if (mpctx->ao && mpctx->ao_chain)
video: add VO framedropping mode This mostly uses the same idea as with vo_vdpau.c, but much simplified. On X11, it tries to get the display framerate with XF86VM, and limits the frequency of new video frames against it. Note that this is an old extension, and is confirmed not to work correctly with multi-monitor setups. But we're using it because it was already around (it is also used by vo_vdpau). This attempts to predict the next vsync event by using the time of the last frame and the display FPS. Even if that goes completely wrong, the results are still relatively good. On other systems, or if the X11 code doesn't return a display FPS, a framerate of 1000 is assumed. This is infinite for all practical purposes, and means that only frames which are definitely too late are dropped. This probably has worse results, but is still useful. "--framedrop=yes" is basically replaced with "--framedrop=decoder". The old framedropping mode is kept around, and should perhaps be improved. Dropping on the decoder level is still useful if decoding itself is too slow.
2014-08-15 21:33:33 +00:00
ao_pause(mpctx->ao);
if (mpctx->video_out)
vo_set_paused(mpctx->video_out, true);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
client API: report pause/unpause reason Not sure about this... might redo. At least this provides a case of a broadcasted event, which requires per-event data allocation. See github issue #576.
2014-02-24 21:49:07 +00:00
end:
client API: remove mpv_event_pause_reason And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE. The real pause state can now be queried with the "core-idle" property, the user pause state with the "pause" property, whether the player is paused due to cache with "paused-for-cache", and the keep open event can be guessed with the "eof-reached" property.
2014-04-14 20:33:41 +00:00
mp_notify(mpctx, mpctx->opts->pause ? MPV_EVENT_PAUSE : MPV_EVENT_UNPAUSE, 0);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
client API: remove mpv_event_pause_reason And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE. The real pause state can now be queried with the "core-idle" property, the user pause state with the "pause" property, whether the player is paused due to cache with "paused-for-cache", and the keep open event can be guessed with the "eof-reached" property.
2014-04-14 20:33:41 +00:00
void unpause_player(struct MPContext *mpctx)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
mpctx->opts->pause = 0;
if (mpctx->video_out && mpctx->opts->stop_screensaver)
vo_control(mpctx->video_out, VOCTRL_KILL_SCREENSAVER, NULL);
if (!mpctx->paused)
client API: report pause/unpause reason Not sure about this... might redo. At least this provides a case of a broadcasted event, which requires per-event data allocation. See github issue #576.
2014-02-24 21:49:07 +00:00
goto end;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
// Don't actually unpause while cache is loading.
if (mpctx->paused_for_cache)
client API: report pause/unpause reason Not sure about this... might redo. At least this provides a case of a broadcasted event, which requires per-event data allocation. See github issue #576.
2014-02-24 21:49:07 +00:00
goto end;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->paused = false;
mpctx->osd_function = 0;
player: rate-limit OSD text update There's no need to update OSD messages and the terminal status if nobody is going to see it. Since the player doesn't block on video display anymore, this update happens to often and probably burns slightly more CPU than necessary. (OSD redrawing is handled separately, so it's just mostly useless text processing and such.) Change it so that it's updated only on every video frame or all 50ms (whatever comes first). For VO OSD, we could in theory try to lock to the OSD redraw heuristic or the display refresh rate, but that's more complicated and doesn't work for the terminal status.
2014-09-25 18:25:24 +00:00
mpctx->osd_force_update = true;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: refactor: eliminate MPContext.d_audio
2016-01-21 21:24:20 +00:00
if (mpctx->ao && mpctx->ao_chain)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
ao_resume(mpctx->ao);
video: add VO framedropping mode This mostly uses the same idea as with vo_vdpau.c, but much simplified. On X11, it tries to get the display framerate with XF86VM, and limits the frequency of new video frames against it. Note that this is an old extension, and is confirmed not to work correctly with multi-monitor setups. But we're using it because it was already around (it is also used by vo_vdpau). This attempts to predict the next vsync event by using the time of the last frame and the display FPS. Even if that goes completely wrong, the results are still relatively good. On other systems, or if the X11 code doesn't return a display FPS, a framerate of 1000 is assumed. This is infinite for all practical purposes, and means that only frames which are definitely too late are dropped. This probably has worse results, but is still useful. "--framedrop=yes" is basically replaced with "--framedrop=decoder". The old framedropping mode is kept around, and should perhaps be improved. Dropping on the decoder level is still useful if decoding itself is too slow.
2014-08-15 21:33:33 +00:00
if (mpctx->video_out)
vo_set_paused(mpctx->video_out, false);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
(void)get_relative_time(mpctx); // ignore time that passed during pause
client API: report pause/unpause reason Not sure about this... might redo. At least this provides a case of a broadcasted event, which requires per-event data allocation. See github issue #576.
2014-02-24 21:49:07 +00:00
end:
client API: remove mpv_event_pause_reason And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE. The real pause state can now be queried with the "core-idle" property, the user pause state with the "pause" property, whether the player is paused due to cache with "paused-for-cache", and the keep open event can be guessed with the "eof-reached" property.
2014-04-14 20:33:41 +00:00
mp_notify(mpctx, mpctx->opts->pause ? MPV_EVENT_PAUSE : MPV_EVENT_UNPAUSE, 0);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
void add_step_frame(struct MPContext *mpctx, int dir)
{
player: refactor: eliminate MPContext.d_video Eventually we want the VO be driven by a A->V filter, so a decoder doesn't even have to exist. Some features definitely require a decoder though (like reporting the decoder in use, hardware decoding, etc.), so for each thing which accessed d_video, it has to be redecided if and how it can access decoder state. At least the "framedrop" property slightly changes semantics: you can now always set this property, even if no video is active. Some untested changes in this commit, but our bio-based distributed test suite has to take care of this.
2016-01-17 17:07:50 +00:00
if (!mpctx->vo_chain)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
return;
if (dir > 0) {
mpctx->step_frames += 1;
client API: remove mpv_event_pause_reason And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE. The real pause state can now be queried with the "core-idle" property, the user pause state with the "pause" property, whether the player is paused due to cache with "paused-for-cache", and the keep open event can be guessed with the "eof-reached" property.
2014-04-14 20:33:41 +00:00
unpause_player(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
} else if (dir < 0) {
player: strictly wait until done when backstepping This fixes backstepping getting "stuck" when e.g. holding down a key bound to the backstep command. The reason is that even if the backstep itself is finished, the next backstep might not take the new video PTS as reference if the hr-seek itself isn't finished yet. The intention of not waiting for the hr-seek to finish was faster backstepping by possibly skipping audio decoding. But it probably doesn't matter enough to make the rest of the code more complex.
2016-04-27 15:01:17 +00:00
if (!mpctx->hrseek_active) {
player: allow passing flags to queue_seek() Change the last parameter from a bool to an int, which is supposed to take bit-flags. The at this point only flag is MPSEEK_FLAG_DELAY, which replaces the previous bool parameter. The old false parameter becomes 0, the old true parameter becomes MPSEEK_FLAG_DELAY. Since the old "immediate" parameter is now essentially inverted, two coalesced immediate and delayed seeks end up as delayed instead of immediate. This change doesn't matter, since there are no relative immediate seeks anyway.
2016-08-15 19:07:32 +00:00
queue_seek(mpctx, MPSEEK_BACKSTEP, 0, MPSEEK_VERY_EXACT, 0);
client API: remove mpv_event_pause_reason And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE. The real pause state can now be queried with the "core-idle" property, the user pause state with the "pause" property, whether the player is paused due to cache with "paused-for-cache", and the keep open event can be guessed with the "eof-reached" property.
2014-04-14 20:33:41 +00:00
pause_player(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
}
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
// Clear some playback-related fields on file loading or after seeks.
void reset_playback_state(struct MPContext *mpctx)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
player: add complex filter graph support See --lavfi-complex option. This is still quite rough. There's no support for dynamic configuration of any kind. There are probably corner cases where playback might freeze or burn 100% CPU (due to dataflow problems when interaction with libavfilter). Future possible plans might include: - freely switch tracks by providing some sort of default track graph label - automatically enabling audio visualization - automatically mix audio or stack video when multiple tracks are selected at once (similar to how multiple sub tracks can be selected)
2016-02-05 22:19:56 +00:00
if (mpctx->lavfi)
lavfi_seek_reset(mpctx->lavfi);
for (int n = 0; n < mpctx->num_tracks; n++) {
if (mpctx->tracks[n]->d_video)
video_reset(mpctx->tracks[n]->d_video);
if (mpctx->tracks[n]->d_audio)
audio_reset_decoding(mpctx->tracks[n]->d_audio);
}
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
reset_video_state(mpctx);
reset_audio_state(mpctx);
reset_subtitle_state(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->hrseek_active = false;
mpctx->hrseek_framedrop = false;
player: when seeking past EOF with --keep-open, seek to last frame It feels strange that seeking past EOF with --keep-open actually leaves the player at a random position. You can't even unpause, because the demuxer is in the EOF state, and what you see on screen is just what was around before the seek. Improve this by attempting to seek to the last video frame if EOF happens. We explicitly don't do this if EOF was reached normally to increase robustness (if the VO got a frame since the last seek, it obviously means we had normal playback before EOF). If an error happens when trying to find the last frame (such as not actually finding a last frame because e.g. the demuxer misbehaves), this will probably turn your CPU into a heater. There is no logic to prevent reinitiating the last-frame search if the last-frame search reached EOF. (Pausing usually prevents that EOF is reached again after a successful last-frame search.) Fixes #819.
2014-12-07 01:47:09 +00:00
mpctx->hrseek_lastframe = false;
player: simplify backstepping Basically reimplement it. The old implementation was quite stupid, and was probably done this way because video filtering and output used to be way less decoupled. Now we can reimplement it in a very simple way: when backstepping, seek to current time, but keep the last frame that was supposed to be discarded when reaching the target time. When the seek finishes, prepend the saved frame to the video frame queue. A disadvantage is that the new implementation fails to skip over timeline boundaries (ordered chapters etc.), but this never worked properly anyway. It's possible that this will be fixed some time in the future.
2016-01-12 22:49:00 +00:00
mpctx->hrseek_backstep = false;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->playback_pts = MP_NOPTS_VALUE;
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
mpctx->last_seek_pts = MP_NOPTS_VALUE;
player: dynamically change cache wait times Remove the hardcoded wait time of 2 seconds. Instead, adjust the wait time each time we unpause: if downloading the data took longer than its estimated playback time, increase the amount of data we wait for. If it's shorter, decrease it. The +/- is supposed to avoid oscillating between two values if the elapsed time and the wait time are similar. It's not sure if this actually helps with anything, but it can't harm.
2014-08-27 21:12:24 +00:00
mpctx->cache_wait_time = 0;
player: reset frame step counter on seeks I suppose this wasn't done in order to keep the frame step counter active even in the next file, but actually it was reset anyway.
2014-11-28 23:24:51 +00:00
mpctx->step_frames = 0;
player: make looping slightly more seamless This affects A-B loops and --loop-file, and audio. Instead of dropping audio by resetting the AO, try to make it seamless by not sending data after the loop point, and after the seek send new data without a reset.
2016-08-18 18:40:23 +00:00
mpctx->ab_loop_clip = true;
audio: change playback restart and resyncing This commit makes audio decoding non-blocking. If e.g. the network is too slow the playloop will just go to sleep, instead of blocking until enough data is available. For video, this was already done with commit 7083f88c. For audio, it's unfortunately much more complicated, because the audio decoder was used in a blocking manner. Large changes are required to get around this. The whole playback restart mechanism must be turned into a statemachine, especially since it has close interactions with video restart. Lots of video code is thus also changed. (For the record, I don't think switching this code to threads would make this conceptually easier: the code would still have to deal with external input while blocked, so these in-between states do get visible [and thus need to be handled] anyway. On the other hand, it certainly should be possible to modularize this code a bit better.) This will probably cause a bunch of regressions.
2014-07-28 18:40:43 +00:00
mpctx->restart_complete = false;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
configure: uniform the defines to #define HAVE_xxx (0|1) The configure followed 5 different convetions of defines because the next guy always wanted to introduce a new better way to uniform it[1]. For an hypothetic feature 'hurr' you could have had: * #define HAVE_HURR 1 / #undef HAVE_DURR * #define HAVE_HURR / #undef HAVE_DURR * #define CONFIG_HURR 1 / #undef CONFIG_DURR * #define HAVE_HURR 1 / #define HAVE_DURR 0 * #define CONFIG_HURR 1 / #define CONFIG_DURR 0 All is now uniform and uses: * #define HAVE_HURR 1 * #define HAVE_DURR 0 We like definining to 0 as opposed to `undef` bcause it can help spot typos and is very helpful when doing big reorganizations in the code. [1]: http://xkcd.com/927/ related
2013-07-16 11:28:28 +00:00
#if HAVE_ENCODING
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
encode_lavc_discontinuity(mpctx->encode_lavc_ctx);
#endif
}
player: remove unused return value
2016-06-08 10:04:56 +00:00
static void mp_seek(MPContext *mpctx, struct seek_params seek)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
struct MPOpts *opts = mpctx->opts;
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
if (!mpctx->demuxer || seek.type == MPSEEK_NONE || seek.amount == MP_NOPTS_VALUE)
player: remove unused return value
2016-06-08 10:04:56 +00:00
return;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
demux: make determining seek capability generic Instead of having each demuxer do it (only demux_mkv actually did...), let generic code determine whether the file is seekable. This requires adding exceptions to demuxers where the stream is not seekable, but the demuxer is. Sort-of try to improve handling of unseekable files in the player. Exit early if the file is determined to be unseekable, instead of resetting all decoders and then performing a pointless seek. Add an exception to allow seeking if the file is not seekable, but the stream cache is enabled. Print a warning in this case, because seeking outside the cache (which we can't prevent since the demuxer is not aware of this problem) still messes everything up.
2013-11-03 18:21:47 +00:00
if (!mpctx->demuxer->seekable) {
player: tell user about --force-seeking if demuxer is not seekable This comes up often, see e.g. #3220. The issue is that if the stream input is not seekable, the demuxer is marked as not seekable. But if the stream cache is enabled, the file still _might_ be seekable to a degree. We recently disabled seeking in this mode because it can cause very weird issues, mostly because if stream-layer seeking fails, the demuxers will arbitrarily misbehave. On the other hand, it can work if the seek is within the cached range, which is why the user can still enable it with --force-seeking. There is a weird trade-off between allowing this and not crapping up too easily, so just informing the user about the possibility seems best.
2016-06-08 09:59:11 +00:00
MP_ERR(mpctx, "Cannot seek in this file.\n");
player: it's not --force-seeking but --force-seekable Oops. Fuck.
2016-07-05 22:11:57 +00:00
MP_ERR(mpctx, "You can forcibly enable it with '--force-seekable=yes'.\n");
player: remove unused return value
2016-06-08 10:04:56 +00:00
return;
demux: make determining seek capability generic Instead of having each demuxer do it (only demux_mkv actually did...), let generic code determine whether the file is seekable. This requires adding exceptions to demuxers where the stream is not seekable, but the demuxer is. Sort-of try to improve handling of unseekable files in the player. Exit early if the file is determined to be unseekable, instead of resetting all decoders and then performing a pointless seek. Add an exception to allow seeking if the file is not seekable, but the stream cache is enabled. Print a warning in this case, because seeking outside the cache (which we can't prevent since the demuxer is not aware of this problem) still messes everything up.
2013-11-03 18:21:47 +00:00
}
player: use symbolic constant for seek precision Meh.
2015-03-04 16:21:05 +00:00
bool hr_seek_very_exact = seek.exact == MPSEEK_VERY_EXACT;
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
double current_time = get_current_time(mpctx);
if (current_time == MP_NOPTS_VALUE)
current_time = 0;
double seek_pts = MP_NOPTS_VALUE;
int demux_flags = 0;
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
switch (seek.type) {
case MPSEEK_ABSOLUTE:
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
seek_pts = seek.amount;
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
break;
player: simplify backstepping Basically reimplement it. The old implementation was quite stupid, and was probably done this way because video filtering and output used to be way less decoupled. Now we can reimplement it in a very simple way: when backstepping, seek to current time, but keep the last frame that was supposed to be discarded when reaching the target time. When the seek finishes, prepend the saved frame to the video frame queue. A disadvantage is that the new implementation fails to skip over timeline boundaries (ordered chapters etc.), but this never worked properly anyway. It's possible that this will be fixed some time in the future.
2016-01-12 22:49:00 +00:00
case MPSEEK_BACKSTEP:
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
seek_pts = current_time;
hr_seek_very_exact = true;
player: simplify backstepping Basically reimplement it. The old implementation was quite stupid, and was probably done this way because video filtering and output used to be way less decoupled. Now we can reimplement it in a very simple way: when backstepping, seek to current time, but keep the last frame that was supposed to be discarded when reaching the target time. When the seek finishes, prepend the saved frame to the video frame queue. A disadvantage is that the new implementation fails to skip over timeline boundaries (ordered chapters etc.), but this never worked properly anyway. It's possible that this will be fixed some time in the future.
2016-01-12 22:49:00 +00:00
break;
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
case MPSEEK_RELATIVE:
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
demux_flags = seek.amount > 0 ? SEEK_FORWARD : SEEK_BACKWARD;
seek_pts = current_time + seek.amount;
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
break;
case MPSEEK_FACTOR: ;
double len = get_time_length(mpctx);
if (len >= 0)
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
seek_pts = seek.amount * len;
demux_flags = seek_pts > current_time ? SEEK_FORWARD : SEEK_BACKWARD;
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
break;
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
default: abort();
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
}
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
double demux_pts = seek_pts;
bool hr_seek = opts->correct_pts && seek.exact != MPSEEK_KEYFRAME &&
((opts->hr_seek == 0 && seek.type == MPSEEK_ABSOLUTE) ||
opts->hr_seek > 0 || seek.exact >= MPSEEK_EXACT) &&
seek_pts != MP_NOPTS_VALUE;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
if (seek.type == MPSEEK_FACTOR || seek.amount < 0 ||
(seek.type == MPSEEK_ABSOLUTE && seek.amount < mpctx->last_chapter_pts))
mpctx->last_chapter_seek = -2;
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
// Under certain circumstances, prefer SEEK_FACTOR.
if (seek.type == MPSEEK_FACTOR && !hr_seek &&
(mpctx->demuxer->ts_resets_possible || seek_pts == MP_NOPTS_VALUE))
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
{
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
demux_pts = seek.amount;
demux_flags |= SEEK_FACTOR;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: return better guess for playback time during seeks Always compute the estimated absolute time of the seek target, and display this as playback time during seeks. Improves behavior with e.g. .ts files, for which we try to avoid seeks by timestamp.
2015-08-21 13:37:07 +00:00
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
if (hr_seek) {
double hr_seek_offset = opts->hr_seek_demuxer_offset;
// Always try to compensate for possibly bad demuxers in "special"
// situations where we need more robustness from the hr-seek code, even
// if the user doesn't use --hr-seek-demuxer-offset.
// The value is arbitrary, but should be "good enough" in most situations.
if (hr_seek_very_exact)
hr_seek_offset = MPMAX(hr_seek_offset, 0.5); // arbitrary
player: offset demuxer on start/seek properly with audio/sub delay Assume you use a large value like --audio-delay=20. Then until now the player would just have seeked normally to a "too late" position, and played silence for about 20 seconds until audio in the correct time range is coming again. Change this by offsetting seeks by the right amount. This works for both external and muxed files. If a seek isn't precise, then it works only for external files. This might cause issues with very large delay options. Hr-seek skipping could take a lot of time (especially because it affects video too), the demuxer queue could overflow, and other weird corner cases could appear. But we just try this on best-effort basis, and if the user uses extreme values we don't guarantee good behavior.
2016-08-04 09:26:57 +00:00
for (int n = 0; n < mpctx->num_tracks; n++) {
double offset = 0;
if (!mpctx->tracks[n]->is_external)
offset += get_track_seek_offset(mpctx, mpctx->tracks[n]);
hr_seek_offset = MPMAX(hr_seek_offset, -offset);
}
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
demux_pts -= hr_seek_offset;
demux_flags = (demux_flags | SEEK_HR | SEEK_BACKWARD) & ~SEEK_FORWARD;
demux_disc: pass seek flags to stream layer Pass through the seek flags to the stream layer. The STREAM_CTRL semantics become a bit awkward, but that's still the least awkward part about optical disc media. Make demux_disc.c request relative seeks. Now the player will use relative seeks if the user sends relative seek commands, and the demuxer announces it wants these by setting rel_seeks to true. This change probably changes seek behavior for dvd, dvdnav, bluray, cdda, and possibly makes seeking useless if the demuxer-cache is set to a high value. Will be used in the next commit. (Split to make reverting the next commit easier.)
2015-01-19 19:45:31 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
demux_seek(mpctx->demuxer, demux_pts, demux_flags);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: slightly simplify seeking in external files For some reason, this checked whether there are external tracks at all before doing any seeks. Possibly this was to avoid multiple get_main_demux_pts() calls, but calling this multiple times shouldn't be too bad.
2013-12-24 10:08:26 +00:00
// Seek external, extra files too:
player: redo demuxer stream selection Use struct track to decide what stream to select. Add a "selected" field and use that in some places instead of checking mpctx->current_track.
2013-12-23 19:14:54 +00:00
for (int t = 0; t < mpctx->num_tracks; t++) {
struct track *track = mpctx->tracks[t];
player: slightly simplify seeking in external files For some reason, this checked whether there are external tracks at all before doing any seeks. Possibly this was to avoid multiple get_main_demux_pts() calls, but calling this multiple times shouldn't be too bad.
2013-12-24 10:08:26 +00:00
if (track->selected && track->is_external && track->demuxer) {
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
double main_new_pos = demux_pts;
player: offset demuxer on start/seek properly with audio/sub delay Assume you use a large value like --audio-delay=20. Then until now the player would just have seeked normally to a "too late" position, and played silence for about 20 seconds until audio in the correct time range is coming again. Change this by offsetting seeks by the right amount. This works for both external and muxed files. If a seek isn't precise, then it works only for external files. This might cause issues with very large delay options. Hr-seek skipping could take a lot of time (especially because it affects video too), the demuxer queue could overflow, and other weird corner cases could appear. But we just try this on best-effort basis, and if the user uses extreme values we don't guarantee good behavior.
2016-08-04 09:26:57 +00:00
if (!hr_seek || track->is_external)
main_new_pos += get_track_seek_offset(mpctx, track);
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
if (demux_flags & SEEK_FACTOR)
main_new_pos = seek_pts;
demux: remove relative seeking Ever since a change in mplayer2 or so, relative seeks were translated to absolute seeks before sending them to the demuxer in most cases. The only exception in current mpv is DVD seeking. Remove the SEEK_ABSOLUTE flag; it's not the implied default. SEEK_FACTOR is kept, because it's sometimes slightly useful for seeking in things like transport streams. (And maybe mkv files without duration set?) DVD seeking is terrible because DVD and libdvdnav are terrible, but mostly because libdvdnav is terrible. libdvdnav does not expose seeking with seek tables. (Although I know xbmc/kodi use an undocumented API that is not declared in the headers by dladdr()ing it - I think the function is dvdnav_jump_to_sector_by_time().) With the current mpv policy if not giving a shit about DVD, just revert our half-working seek hacks and always use dvdnav_time_search(). Relative seeking might get stuck sometimes; in this case --hr-seek=always is recommended.
2016-02-28 18:14:23 +00:00
demux_seek(track->demuxer, main_new_pos, 0);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
player: make looping slightly more seamless This affects A-B loops and --loop-file, and audio. Instead of dropping audio by resetting the AO, try to make it seamless by not sending data after the loop point, and after the seek send new data without a reset.
2016-08-18 18:40:23 +00:00
if (!(seek.flags & MPSEEK_FLAG_NOFLUSH))
clear_audio_output_buffers(mpctx);
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
reset_playback_state(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
/* Use the target time as "current position" for further relative
* seeks etc until a new video frame has been decoded */
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
mpctx->last_seek_pts = seek_pts;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: remove old timeline/ordered chapters support
2016-02-15 20:03:51 +00:00
if (hr_seek) {
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->hrseek_active = true;
player: handle hrseek framedrop correctly This was non-sense and checked the option instead of the actual flag. Possibly could lead to incorrect hr-seeks.
2016-01-12 22:48:28 +00:00
mpctx->hrseek_framedrop = !hr_seek_very_exact && opts->hr_seek_framedrop;
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
mpctx->hrseek_backstep = seek.type == MPSEEK_BACKSTEP;
mpctx->hrseek_pts = seek_pts;
player: add some debug output for seeking
2015-06-18 20:31:55 +00:00
player: simplify backstepping Basically reimplement it. The old implementation was quite stupid, and was probably done this way because video filtering and output used to be way less decoupled. Now we can reimplement it in a very simple way: when backstepping, seek to current time, but keep the last frame that was supposed to be discarded when reaching the target time. When the seek finishes, prepend the saved frame to the video frame queue. A disadvantage is that the new implementation fails to skip over timeline boundaries (ordered chapters etc.), but this never worked properly anyway. It's possible that this will be fixed some time in the future.
2016-01-12 22:49:00 +00:00
MP_VERBOSE(mpctx, "hr-seek, skipping to %f%s%s\n", mpctx->hrseek_pts,
mpctx->hrseek_framedrop ? "" : " (no framedrop)",
mpctx->hrseek_backstep ? " (backstep)" : "");
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: simplify mp_seek()
2016-02-28 18:43:07 +00:00
if (mpctx->stop_play == AT_END_OF_FILE)
mpctx->stop_play = KEEP_PLAYING;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->start_timestamp = mp_time_sec();
player: don't sleep after seeks
2014-07-21 17:31:25 +00:00
mpctx->sleeptime = 0;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
mp_notify(mpctx, MPV_EVENT_SEEK, NULL);
player: update playback position on seek If the actual PTS is not known yet right after a seek, the "time-pos" property will just return the seek target PTS. For this purpose, trigger a change event to make the client API update the "time-pos" and related properties. (MPV_EVENT_TICK triggers this update.)
2014-07-28 22:07:54 +00:00
mp_notify(mpctx, MPV_EVENT_TICK, NULL);
player: gross hack to improve non-hr seeking with external audio tracks Relative seeks backwards with external audio tracks does not always work well: it tends to happen that video seek back further than audio, so audio will remain silent until the audio's after-seek position is reached. This happens because we strictly seek both video and audio demuxer to the approximate desirted target PTS, and then start decoding from that. Commit 81358380 removes an older method that was supposed to deal with this. It was sort of bad, because it could lead to the playback core freezing by waiting on network. Ideally, the demuxer layer would probably somehow deal with such seeks, and do them in a way the audio is seeked after video. Currently this is infeasible, because the demuxer layer assumes a single demuxer, and external tracks simply use separate demuxer layers. (MPlayer actually had a pseudo-demuxer that joined external tracks into a single demuxer, but this is not flexible enough - and also, the demuxer layer as it currently exists can't deal with dynamically removing external tracks either. Maybe some time in the future.) Instead, add a gross hack, that essentially reseeks the audio if it detects that it's too far off. The result is actually not too bad, because we can reuse the mechanism that is used for instant track switching. This way we can make sure of the right position, without having to care about certain other issues. It should be noted that if the audio demuxer is used for other tracks too, and the demuxer does not support refresh seeking, audio will probably be off by even a higher amount. But this should be rare.
2016-08-07 14:29:13 +00:00
mpctx->audio_allow_second_chance_seek =
!hr_seek && !(demux_flags & SEEK_FORWARD);
player: make looping slightly more seamless This affects A-B loops and --loop-file, and audio. Instead of dropping audio by resetting the AO, try to make it seamless by not sending data after the loop point, and after the seek send new data without a reset.
2016-08-18 18:40:23 +00:00
mpctx->ab_loop_clip = mpctx->last_seek_pts < opts->ab_loop[1];
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: handle seek delays differently The code removed from handle_input_and_seek_coalesce() did two things: 1. If there's a queued seek, stop accepting non-seek commands, and delay them to the next playloop iteration. 2. If a seek is executing (i.e. the seek was unqueued, and now it's trying to decode and display the first video frame), stop accepting seek commands (and in fact all commands that were queued after the first seek command). This logic is disabled if seeking started longer than 300ms ago. (To avoid starvation.) I'm not sure why 1. would be needed. It's still possible that a command immediately executed after a seek command sees a "seeking in progress" state, because it affects queued seeks only, and not seeks in progress. Drop this code, since it can easily lead to input starvation, and I'm not aware of any disadvantages. The logic in 2. is good to make seeking behave much better, as it guarantees that the video display is updated frequently. Keep the core idea, but implement it differently. Now this logic is applied to seeks only. Commands after the seek can execute freely, and like with 1., I don't see a reason why they couldn't. However, in some cases, seeks are supposed to be executed instantly, so queue_seek() needs an additional parameter to signal the need for immediate update. One nice thing is that commands like sub_seek automatically profit from the seek delay logic. On the other hand, hitting chapter seek multiple times still does not update the video on chapter boundaries (as it should be). Note that the main goal of this commit is actually simplification of the input processing logic and to allow all commands to be executed immediately.
2014-02-07 21:29:50 +00:00
// This combines consecutive seek requests.
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
void queue_seek(struct MPContext *mpctx, enum seek_type type, double amount,
player: allow passing flags to queue_seek() Change the last parameter from a bool to an int, which is supposed to take bit-flags. The at this point only flag is MPSEEK_FLAG_DELAY, which replaces the previous bool parameter. The old false parameter becomes 0, the old true parameter becomes MPSEEK_FLAG_DELAY. Since the old "immediate" parameter is now essentially inverted, two coalesced immediate and delayed seeks end up as delayed instead of immediate. This change doesn't matter, since there are no relative immediate seeks anyway.
2016-08-15 19:07:32 +00:00
enum seek_precision exact, int flags)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
struct seek_params *seek = &mpctx->seek;
player: do not exit when a seek gets queued Seems logical. Note that if playback otherwise ends while playback is active and a seek is still queued, we still exit. Otherwise you couldn't end playback by seeking past the end of the file (which is classic MPlayer and mpv behavior).
2015-06-16 21:07:46 +00:00
if (mpctx->stop_play == AT_END_OF_FILE)
mpctx->stop_play = KEEP_PLAYING;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
switch (type) {
case MPSEEK_RELATIVE:
player: allow passing flags to queue_seek() Change the last parameter from a bool to an int, which is supposed to take bit-flags. The at this point only flag is MPSEEK_FLAG_DELAY, which replaces the previous bool parameter. The old false parameter becomes 0, the old true parameter becomes MPSEEK_FLAG_DELAY. Since the old "immediate" parameter is now essentially inverted, two coalesced immediate and delayed seeks end up as delayed instead of immediate. This change doesn't matter, since there are no relative immediate seeks anyway.
2016-08-15 19:07:32 +00:00
seek->flags |= flags;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
if (seek->type == MPSEEK_FACTOR)
return; // Well... not common enough to bother doing better
seek->amount += amount;
seek->exact = MPMAX(seek->exact, exact);
if (seek->type == MPSEEK_NONE)
seek->exact = exact;
if (seek->type == MPSEEK_ABSOLUTE)
return;
seek->type = MPSEEK_RELATIVE;
return;
case MPSEEK_ABSOLUTE:
case MPSEEK_FACTOR:
player: simplify backstepping Basically reimplement it. The old implementation was quite stupid, and was probably done this way because video filtering and output used to be way less decoupled. Now we can reimplement it in a very simple way: when backstepping, seek to current time, but keep the last frame that was supposed to be discarded when reaching the target time. When the seek finishes, prepend the saved frame to the video frame queue. A disadvantage is that the new implementation fails to skip over timeline boundaries (ordered chapters etc.), but this never worked properly anyway. It's possible that this will be fixed some time in the future.
2016-01-12 22:49:00 +00:00
case MPSEEK_BACKSTEP:
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
*seek = (struct seek_params) {
.type = type,
.amount = amount,
.exact = exact,
player: allow passing flags to queue_seek() Change the last parameter from a bool to an int, which is supposed to take bit-flags. The at this point only flag is MPSEEK_FLAG_DELAY, which replaces the previous bool parameter. The old false parameter becomes 0, the old true parameter becomes MPSEEK_FLAG_DELAY. Since the old "immediate" parameter is now essentially inverted, two coalesced immediate and delayed seeks end up as delayed instead of immediate. This change doesn't matter, since there are no relative immediate seeks anyway.
2016-08-15 19:07:32 +00:00
.flags = flags,
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
};
return;
case MPSEEK_NONE:
*seek = (struct seek_params){ 0 };
return;
}
abort();
}
void execute_queued_seek(struct MPContext *mpctx)
{
if (mpctx->seek.type) {
player: let explicitly imprecise seeks cancel precise seeks If an imprecise seek is issues while a precise seek is ongoing, don't wait up to 300ms (herustistic which usually improves user experience), but instead let it cancel the seek. Improves responsiveness of the OSC after the previous commit. Note that we don't do this on "default-precise" seeks, because we don't know if they're going to be precise or not.
2014-07-29 17:59:56 +00:00
// Let explicitly imprecise seeks cancel precise seeks:
player: use symbolic constant for seek precision Meh.
2015-03-04 16:21:05 +00:00
if (mpctx->hrseek_active && mpctx->seek.exact == MPSEEK_KEYFRAME)
player: let explicitly imprecise seeks cancel precise seeks If an imprecise seek is issues while a precise seek is ongoing, don't wait up to 300ms (herustistic which usually improves user experience), but instead let it cancel the seek. Improves responsiveness of the OSC after the previous commit. Note that we don't do this on "default-precise" seeks, because we don't know if they're going to be precise or not.
2014-07-29 17:59:56 +00:00
mpctx->start_timestamp = -1e9;
player: handle seek delays differently The code removed from handle_input_and_seek_coalesce() did two things: 1. If there's a queued seek, stop accepting non-seek commands, and delay them to the next playloop iteration. 2. If a seek is executing (i.e. the seek was unqueued, and now it's trying to decode and display the first video frame), stop accepting seek commands (and in fact all commands that were queued after the first seek command). This logic is disabled if seeking started longer than 300ms ago. (To avoid starvation.) I'm not sure why 1. would be needed. It's still possible that a command immediately executed after a seek command sees a "seeking in progress" state, because it affects queued seeks only, and not seeks in progress. Drop this code, since it can easily lead to input starvation, and I'm not aware of any disadvantages. The logic in 2. is good to make seeking behave much better, as it guarantees that the video display is updated frequently. Keep the core idea, but implement it differently. Now this logic is applied to seeks only. Commands after the seek can execute freely, and like with 1., I don't see a reason why they couldn't. However, in some cases, seeks are supposed to be executed instantly, so queue_seek() needs an additional parameter to signal the need for immediate update. One nice thing is that commands like sub_seek automatically profit from the seek delay logic. On the other hand, hitting chapter seek multiple times still does not update the video on chapter boundaries (as it should be). Note that the main goal of this commit is actually simplification of the input processing logic and to allow all commands to be executed immediately.
2014-02-07 21:29:50 +00:00
/* If the user seeks continuously (keeps arrow key down)
* try to finish showing a frame from one location before doing
* another seek (which could lead to unchanging display). */
player: allow passing flags to queue_seek() Change the last parameter from a bool to an int, which is supposed to take bit-flags. The at this point only flag is MPSEEK_FLAG_DELAY, which replaces the previous bool parameter. The old false parameter becomes 0, the old true parameter becomes MPSEEK_FLAG_DELAY. Since the old "immediate" parameter is now essentially inverted, two coalesced immediate and delayed seeks end up as delayed instead of immediate. This change doesn't matter, since there are no relative immediate seeks anyway.
2016-08-15 19:07:32 +00:00
bool delay = mpctx->seek.flags & MPSEEK_FLAG_DELAY;
if (delay && mpctx->video_status < STATUS_PLAYING &&
player: handle seek delays differently The code removed from handle_input_and_seek_coalesce() did two things: 1. If there's a queued seek, stop accepting non-seek commands, and delay them to the next playloop iteration. 2. If a seek is executing (i.e. the seek was unqueued, and now it's trying to decode and display the first video frame), stop accepting seek commands (and in fact all commands that were queued after the first seek command). This logic is disabled if seeking started longer than 300ms ago. (To avoid starvation.) I'm not sure why 1. would be needed. It's still possible that a command immediately executed after a seek command sees a "seeking in progress" state, because it affects queued seeks only, and not seeks in progress. Drop this code, since it can easily lead to input starvation, and I'm not aware of any disadvantages. The logic in 2. is good to make seeking behave much better, as it guarantees that the video display is updated frequently. Keep the core idea, but implement it differently. Now this logic is applied to seeks only. Commands after the seek can execute freely, and like with 1., I don't see a reason why they couldn't. However, in some cases, seeks are supposed to be executed instantly, so queue_seek() needs an additional parameter to signal the need for immediate update. One nice thing is that commands like sub_seek automatically profit from the seek delay logic. On the other hand, hitting chapter seek multiple times still does not update the video on chapter boundaries (as it should be). Note that the main goal of this commit is actually simplification of the input processing logic and to allow all commands to be executed immediately.
2014-02-07 21:29:50 +00:00
mp_time_sec() - mpctx->start_timestamp < 0.3)
return;
player: remove old timeline/ordered chapters support
2016-02-15 20:03:51 +00:00
mp_seek(mpctx, mpctx->seek);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->seek = (struct seek_params){0};
}
}
player: don't display zero duration for files with unknown duration On OSD/terminal, just don't display the duration if unavailable. Make the "length" property unavailable if duration is unavailable.
2014-10-29 20:54:59 +00:00
// -1 if unknown
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double get_time_length(struct MPContext *mpctx)
{
struct demuxer *demuxer = mpctx->demuxer;
if (!demuxer)
player: don't display zero duration for files with unknown duration On OSD/terminal, just don't display the duration if unavailable. Make the "length" property unavailable if duration is unavailable.
2014-10-29 20:54:59 +00:00
return -1;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double len = demuxer_get_time_length(demuxer);
if (len >= 0)
return len;
player: don't display zero duration for files with unknown duration On OSD/terminal, just don't display the duration if unavailable. Make the "length" property unavailable if duration is unavailable.
2014-10-29 20:54:59 +00:00
return -1; // unknown
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
double get_current_time(struct MPContext *mpctx)
{
struct demuxer *demuxer = mpctx->demuxer;
command: make time properties unavailable if timestamp is unknown Let's hope this doesn't confuse client API users too much. It's still the best solution to get rid of corner cases where it actually return the wrong timestamp on start, and then suddenly jump.
2015-10-16 14:16:10 +00:00
if (demuxer) {
if (mpctx->playback_pts != MP_NOPTS_VALUE)
return mpctx->playback_pts;
if (mpctx->last_seek_pts != MP_NOPTS_VALUE)
return mpctx->last_seek_pts;
}
return MP_NOPTS_VALUE;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: make the time display relative to start PTS This commit makes the playback start time always at time 0. Signed-off-by: wm4 <wm4@nowhere>
2014-06-29 17:27:46 +00:00
double get_playback_time(struct MPContext *mpctx)
{
double cur = get_current_time(mpctx);
command: make time properties unavailable if timestamp is unknown Let's hope this doesn't confuse client API users too much. It's still the best solution to get rid of corner cases where it actually return the wrong timestamp on start, and then suddenly jump.
2015-10-16 14:16:10 +00:00
if (cur == MP_NOPTS_VALUE)
return cur;
player: clamp display time to known time range on seeking During seeking, and there is momemtarily no new data available yet, the player will display the seek target as current time. Clamp this time to the known time range as implied by the start time and the duration of the file. This improves behavior especially when seeking in audio files, for which this for some reason triggers rather often. There were some users complaining about this. This makes behavior worse for files with timestamp resets, or incorrectly reported duration. (The latter is relatively common, e.g. libavformat shortcomings, or incomplete files.)
2015-04-28 20:03:18 +00:00
// During seeking, the time corresponds to the last seek time - apply some
// cosmetics to it.
if (mpctx->playback_pts == MP_NOPTS_VALUE) {
double length = get_time_length(mpctx);
if (length >= 0)
player: handle rebasing start time differently Most of this is explained in the DOCS additions. This gives us slightly more sanity, because there is less interaction between the various parts. The goal is getting rid of the video_offset entirely. The simplification extends to the user API. In particular, we don't need to fix missing parts in the API, such as the lack for a seek command that seeks relatively to the start time. All these things are now transparent. (If someone really wants to know the real timestamps/start time, new properties would have to be added.)
2015-11-16 21:47:17 +00:00
cur = MPCLAMP(cur, 0, length);
player: clamp display time to known time range on seeking During seeking, and there is momemtarily no new data available yet, the player will display the seek target as current time. Clamp this time to the known time range as implied by the start time and the duration of the file. This improves behavior especially when seeking in audio files, for which this for some reason triggers rather often. There were some users complaining about this. This makes behavior worse for files with timestamp resets, or incorrectly reported duration. (The latter is relatively common, e.g. libavformat shortcomings, or incomplete files.)
2015-04-28 20:03:18 +00:00
}
player: handle rebasing start time differently Most of this is explained in the DOCS additions. This gives us slightly more sanity, because there is less interaction between the various parts. The goal is getting rid of the video_offset entirely. The simplification extends to the user API. In particular, we don't need to fix missing parts in the API, such as the lack for a seek command that seeks relatively to the start time. All these things are now transparent. (If someone really wants to know the real timestamps/start time, new properties would have to be added.)
2015-11-16 21:47:17 +00:00
return cur;
player: make the time display relative to start PTS This commit makes the playback start time always at time 0. Signed-off-by: wm4 <wm4@nowhere>
2014-06-29 17:27:46 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
// Return playback position in 0.0-1.0 ratio, or -1 if unknown.
double get_current_pos_ratio(struct MPContext *mpctx, bool use_range)
{
struct demuxer *demuxer = mpctx->demuxer;
if (!demuxer)
return -1;
double ans = -1;
player: handle rebasing start time differently Most of this is explained in the DOCS additions. This gives us slightly more sanity, because there is less interaction between the various parts. The goal is getting rid of the video_offset entirely. The simplification extends to the user API. In particular, we don't need to fix missing parts in the API, such as the lack for a seek command that seeks relatively to the start time. All these things are now transparent. (If someone really wants to know the real timestamps/start time, new properties would have to be added.)
2015-11-16 21:47:17 +00:00
double start = 0;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double len = get_time_length(mpctx);
if (use_range) {
player: use MP_NOPTS_VALUE as rel_time_to_abs() error value And consistently use MP_NOPTS_VALUE as error value for the users of this function. This is better than using -1, especially because negative values can be valid timestamps.
2014-03-25 01:32:24 +00:00
double startpos = rel_time_to_abs(mpctx, mpctx->opts->play_start);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double endpos = get_play_end_pts(mpctx);
player: handle rebasing start time differently Most of this is explained in the DOCS additions. This gives us slightly more sanity, because there is less interaction between the various parts. The goal is getting rid of the video_offset entirely. The simplification extends to the user API. In particular, we don't need to fix missing parts in the API, such as the lack for a seek command that seeks relatively to the start time. All these things are now transparent. (If someone really wants to know the real timestamps/start time, new properties would have to be added.)
2015-11-16 21:47:17 +00:00
if (endpos == MP_NOPTS_VALUE || endpos > MPMAX(0, len))
endpos = MPMAX(0, len);
if (startpos == MP_NOPTS_VALUE || startpos < 0)
startpos = 0;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
if (endpos < startpos)
endpos = startpos;
start = startpos;
len = endpos - startpos;
}
double pos = get_current_time(mpctx);
player: fallback to seek time for percent-pos property The percent-pos property normally goes by time, except for file formats like .ts or .ogg, where you can't trust the timestamps and duration info to compute the position in the overall files. These use the byte position and size instead. When the file position was unavailable (e.g. due to an ongoing seek), the percent-pos was unknown. Change it to use the time position instead. In most cases, it's actually accurate enough, and the temporary unavailability of the property can be annoying, e.g. on the terminal status line.
2015-01-14 21:14:20 +00:00
if (len > 0)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
ans = MPCLAMP((pos - start) / len, 0, 1);
player: fallback to seek time for percent-pos property The percent-pos property normally goes by time, except for file formats like .ts or .ogg, where you can't trust the timestamps and duration info to compute the position in the overall files. These use the byte position and size instead. When the file position was unavailable (e.g. due to an ongoing seek), the percent-pos was unknown. Change it to use the time position instead. In most cases, it's actually accurate enough, and the temporary unavailability of the property can be annoying, e.g. on the terminal status line.
2015-01-14 21:14:20 +00:00
if (ans < 0 || demuxer->ts_resets_possible) {
stream: don't use end_pos Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The advantage is that always the correct size will be used. There can be no doubt anymore whether the end_pos value is outdated (as it happens often with files that are being downloaded). Some streams still use end_pos. They don't change size, and it's easier to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a STREAM_CTRL_GET_SIZE implementation to these streams. Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was uint64_t before). Remove the seek flags mess, and replace them with a seekable flag. Every stream must set it consistently now, and an assertion in stream.c checks this. Don't distinguish between streams that can only be forward or backwards seeked, since we have no such stream types.
2014-05-24 12:04:09 +00:00
int64_t size;
demux: add a demuxer thread This adds a thread to the demuxer which reads packets asynchronously. It will do so until a configurable minimum packet queue size is reached. (See options.rst additions.) For now, the thread is disabled by default. There are some corner cases that have to be fixed, such as fixing cache behavior with webradios. Note that most interaction with the demuxer is still blocking, so if e.g. network dies, the player will still freeze. But this change will make it possible to remove most causes for freezing. Most of the new code in demux.c actually consists of weird caches to compensate for thread-safety issues (with the previously single-threaded design), or to avoid blocking by having to wait on the demuxer thread. Most of the changes in the player are due to the fact that we must not access the source stream directly. the demuxer thread already accesses it, and the stream stuff is not thread-safe. For timeline stuff (like ordered chapters), we enable the thread for the current segment only. We also clear its packet queue on seek, so that the remaining (unconsumed) readahead buffer doesn't waste memory. Keep in mind that insane subtitles (such as ASS typesetting muxed into mkv files) will practically disable the readahead, because the total queue size is considered when checking whether the minimum queue size was reached.
2014-07-16 20:40:21 +00:00
if (demux_stream_control(demuxer, STREAM_CTRL_GET_SIZE, &size) > 0) {
if (size > 0 && demuxer->filepos >= 0)
player: don't use stream position as fallback for percent-pos This should be unneeded, and the packet position is already sufficient for this case. Accessing the stream position directly is going to be a problem when the stream is accessed from another thread later.
2014-07-05 15:00:48 +00:00
ans = MPCLAMP(demuxer->filepos / (double)size, 0, 1);
stream: don't use end_pos Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The advantage is that always the correct size will be used. There can be no doubt anymore whether the end_pos value is outdated (as it happens often with files that are being downloaded). Some streams still use end_pos. They don't change size, and it's easier to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a STREAM_CTRL_GET_SIZE implementation to these streams. Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was uint64_t before). Remove the seek flags mess, and replace them with a seekable flag. Every stream must set it consistently now, and an assertion in stream.c checks this. Don't distinguish between streams that can only be forward or backwards seeked, since we have no such stream types.
2014-05-24 12:04:09 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
if (use_range) {
if (mpctx->opts->play_frames > 0)
ans = MPMAX(ans, 1.0 -
mpctx->max_frames / (double) mpctx->opts->play_frames);
}
return ans;
}
player: don't show "0%" percentage in infinite streams
2014-12-20 16:31:58 +00:00
// 0-100, -1 if unknown
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
int get_percent_pos(struct MPContext *mpctx)
{
player: don't show "0%" percentage in infinite streams
2014-12-20 16:31:58 +00:00
double pos = get_current_pos_ratio(mpctx, false);
return pos < 0 ? -1 : pos * 100;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
// -2 is no chapters, -1 is before first chapter
int get_current_chapter(struct MPContext *mpctx)
{
player: remove weird separation between no chapters and 0 chapters For some reason, it mattered whether mpctx->chapters was NULL or not, even if mpctx->num_chapters was 0. Remove this separation; it serves no purpose.
2014-03-25 01:10:24 +00:00
if (!mpctx->num_chapters)
return -2;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double current_pts = get_current_time(mpctx);
player: remove weird separation between no chapters and 0 chapters For some reason, it mattered whether mpctx->chapters was NULL or not, even if mpctx->num_chapters was 0. Remove this separation; it serves no purpose.
2014-03-25 01:10:24 +00:00
int i;
player: don't ignore first chapter It's a mystery why this was done this way. If the first chapter starts later than the current position, we do have to return -1.
2014-07-31 20:54:57 +00:00
for (i = 0; i < mpctx->num_chapters; i++)
player: always use demux_chapter Instead of defining a separate data structure in the core. For some odd reason, demux_chapter exported the chapter time in nano-seconds. Change that to the usual timestamps (rename the field to make any code relying on this to fail compilation), and also remove the unused chapter end time.
2014-11-02 16:20:04 +00:00
if (current_pts < mpctx->chapters[i].pts)
player: remove weird separation between no chapters and 0 chapters For some reason, it mattered whether mpctx->chapters was NULL or not, even if mpctx->num_chapters was 0. Remove this separation; it serves no purpose.
2014-03-25 01:10:24 +00:00
break;
return MPMAX(mpctx->last_chapter_seek, i - 1);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
char *chapter_display_name(struct MPContext *mpctx, int chapter)
{
char *name = chapter_name(mpctx, chapter);
player: simplify chapter display name code The display name is always recomputed, so we can always toss the input name.
2014-08-27 22:16:03 +00:00
char *dname = NULL;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
if (name) {
dname = talloc_asprintf(NULL, "(%d) %s", chapter + 1, name);
} else if (chapter < -1) {
dname = talloc_strdup(NULL, "(unavailable)");
} else {
int chapter_count = get_chapter_count(mpctx);
if (chapter_count <= 0)
dname = talloc_asprintf(NULL, "(%d)", chapter + 1);
else
dname = talloc_asprintf(NULL, "(%d) of %d", chapter + 1,
chapter_count);
}
return dname;
}
// returns NULL if chapter name unavailable
char *chapter_name(struct MPContext *mpctx, int chapter)
{
player: remove weird separation between no chapters and 0 chapters For some reason, it mattered whether mpctx->chapters was NULL or not, even if mpctx->num_chapters was 0. Remove this separation; it serves no purpose.
2014-03-25 01:10:24 +00:00
if (chapter < 0 || chapter >= mpctx->num_chapters)
return NULL;
demux: remove redundant demux_chapter.name field Instead, force everyone to use the metadata struct and set a "title" field. This is only a problem for the timeline producers, which set up chapters manually. (They do this because a timeline is a separate struct.) This fixes the behavior of the chapter-metadata property, which never returned a "title" property for e.g. ordered chapters.
2015-08-12 09:10:45 +00:00
return mp_tags_get_str(mpctx->chapters[chapter].metadata, "title");
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: refactor chapter seek code mp_seek_chapter() had only 1 caller. Also the code was rather roundabout; the entire function can be compressed to 5 lines of code. (The new code is functionally the same - "mpctx->last_chapter_seek = -2;" was effectively a dead assingment.)
2015-07-10 10:11:14 +00:00
// returns the start of the chapter in seconds (NOPTS if unavailable)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double chapter_start_time(struct MPContext *mpctx, int chapter)
{
if (chapter == -1)
player: handle rebasing start time differently Most of this is explained in the DOCS additions. This gives us slightly more sanity, because there is less interaction between the various parts. The goal is getting rid of the video_offset entirely. The simplification extends to the user API. In particular, we don't need to fix missing parts in the API, such as the lack for a seek command that seeks relatively to the start time. All these things are now transparent. (If someone really wants to know the real timestamps/start time, new properties would have to be added.)
2015-11-16 21:47:17 +00:00
return 0;
player: remove weird separation between no chapters and 0 chapters For some reason, it mattered whether mpctx->chapters was NULL or not, even if mpctx->num_chapters was 0. Remove this separation; it serves no purpose.
2014-03-25 01:10:24 +00:00
if (chapter >= 0 && chapter < mpctx->num_chapters)
player: always use demux_chapter Instead of defining a separate data structure in the core. For some odd reason, demux_chapter exported the chapter time in nano-seconds. Change that to the usual timestamps (rename the field to make any code relying on this to fail compilation), and also remove the unused chapter end time.
2014-11-02 16:20:04 +00:00
return mpctx->chapters[chapter].pts;
player: let chapter_start_time() return MP_NOPTS_VALUE for unknown times
2014-03-25 01:18:12 +00:00
return MP_NOPTS_VALUE;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
int get_chapter_count(struct MPContext *mpctx)
{
player: remove demuxer chapoter API wrappers Instead, always use the mpctx->chapters array. Before this commit, this array was used only for ordered chapters and such, but now it's always populated if there are chapters.
2014-03-25 01:05:48 +00:00
return mpctx->num_chapters;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: allow redrawing screen during seeks If seeks take very long, it's better not to freeze up the display. (This doesn't handle the case when decoding video frames is extremely slow; just if hr-seek is used, or the demuxer is threaded and blocks on network I/O.)
2014-08-03 17:09:22 +00:00
static void handle_osd_redraw(struct MPContext *mpctx)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
if (!mpctx->video_out || !mpctx->video_out->config_ok)
player: allow redrawing screen during seeks If seeks take very long, it's better not to freeze up the display. (This doesn't handle the case when decoding video frames is extremely slow; just if hr-seek is used, or the demuxer is threaded and blocks on network I/O.)
2014-08-03 17:09:22 +00:00
return;
// If we're playing normally, let OSD be redrawn naturally as part of
// video display.
player: don't delay OSD redraw when paused We want this heuristic to trigger during normal playback only.
2014-08-10 11:11:46 +00:00
if (!mpctx->paused) {
if (mpctx->sleeptime < 0.1 && mpctx->video_status == STATUS_PLAYING)
return;
}
player: allow redrawing screen during seeks If seeks take very long, it's better not to freeze up the display. (This doesn't handle the case when decoding video frames is extremely slow; just if hr-seek is used, or the demuxer is threaded and blocks on network I/O.)
2014-08-03 17:09:22 +00:00
// Don't redraw immediately during a seek (makes it significantly slower).
player: eagerly redraw OSD when seeking with coverart
2016-04-23 14:39:46 +00:00
bool use_video = mpctx->vo_chain && !mpctx->vo_chain->is_coverart;
if (use_video && mp_time_sec() - mpctx->start_timestamp < 0.1) {
player: properly wakeup when delaying OSD Not sure in which situations this could make a difference; probably none in practice, but it's more correct. CC: @mpv-player/stable
2014-10-03 19:57:16 +00:00
mpctx->sleeptime = MPMIN(mpctx->sleeptime, 0.1);
player: allow redrawing screen during seeks If seeks take very long, it's better not to freeze up the display. (This doesn't handle the case when decoding video frames is extremely slow; just if hr-seek is used, or the demuxer is threaded and blocks on network I/O.)
2014-08-03 17:09:22 +00:00
return;
player: properly wakeup when delaying OSD Not sure in which situations this could make a difference; probably none in practice, but it's more correct. CC: @mpv-player/stable
2014-10-03 19:57:16 +00:00
}
video: return responsibility of video redraw back to playloop When the VO was moved it its own thread, responsibility for redrawing was given to the VO thread itself. So if there was a condition that indicated that redrawing was required, like expose events or certain VOCTRLs, the VO thread was redrawing itself. This worked fine, but there are some corner cases where this works rather badly. E.g. if I fullscreen the player and hit panscan controls with mpv's default autorepeat rate, playback stops. This happens because the VO redraws itself after every panscan change command. Running each (repeated) command takes so long due to redrawing and (involuntary) waiting on vsync, that it never leaves the input processing loop while the key is held down. I suspect that in my case, redrawing in fullscreen mode just gets slow enough that it takes 2 vsyncs instead of 1 on average, and the processing time gets larger than the autorepeat delay. Fix this by taking redraw control from the VO, and instead let the playloop issue a "real" redraw command to the VO if needed. This basically reverts redraw handling to what it was before moving the VO to a thread. CC: @mpv-player/stable
2014-10-03 19:53:32 +00:00
bool want_redraw = osd_query_and_reset_want_redraw(mpctx->osd) ||
vo_want_redraw(mpctx->video_out);
video/out: change aspects of OSD handling Let the VOs draw the OSD on their own, instead of making OSD drawing a separate VO driver call. Further, let it be the VOs responsibility to request subtitles with the correct PTS. We also basically allow the VO to request OSD/subtitles at any time. OSX changes untested.
2014-06-15 18:46:57 +00:00
if (!want_redraw)
player: allow redrawing screen during seeks If seeks take very long, it's better not to freeze up the display. (This doesn't handle the case when decoding video frames is extremely slow; just if hr-seek is used, or the demuxer is threaded and blocks on network I/O.)
2014-08-03 17:09:22 +00:00
return;
video/out: change aspects of OSD handling Let the VOs draw the OSD on their own, instead of making OSD drawing a separate VO driver call. Further, let it be the VOs responsibility to request subtitles with the correct PTS. We also basically allow the VO to request OSD/subtitles at any time. OSX changes untested.
2014-06-15 18:46:57 +00:00
vo_redraw(mpctx->video_out);
player: allow redrawing screen during seeks If seeks take very long, it's better not to freeze up the display. (This doesn't handle the case when decoding video frames is extremely slow; just if hr-seek is used, or the demuxer is threaded and blocks on network I/O.)
2014-08-03 17:09:22 +00:00
mpctx->sleeptime = 0;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
static void handle_pause_on_low_cache(struct MPContext *mpctx)
{
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
bool force_update = false;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
struct MPOpts *opts = mpctx->opts;
demux: add a demuxer thread This adds a thread to the demuxer which reads packets asynchronously. It will do so until a configurable minimum packet queue size is reached. (See options.rst additions.) For now, the thread is disabled by default. There are some corner cases that have to be fixed, such as fixing cache behavior with webradios. Note that most interaction with the demuxer is still blocking, so if e.g. network dies, the player will still freeze. But this change will make it possible to remove most causes for freezing. Most of the new code in demux.c actually consists of weird caches to compensate for thread-safety issues (with the previously single-threaded design), or to avoid blocking by having to wait on the demuxer thread. Most of the changes in the player are due to the fact that we must not access the source stream directly. the demuxer thread already accesses it, and the stream stuff is not thread-safe. For timeline stuff (like ordered chapters), we enable the thread for the current segment only. We also clear its packet queue on seek, so that the remaining (unconsumed) readahead buffer doesn't waste memory. Keep in mind that insane subtitles (such as ASS typesetting muxed into mkv files) will practically disable the readahead, because the total queue size is considered when checking whether the minimum queue size was reached.
2014-07-16 20:40:21 +00:00
if (!mpctx->demuxer)
cache: redo options and default settings Some options change from percentages to number of kilobytes; there are no cache options using percentages anymore. Raise the default values. The cache is now 25000 kilobytes, although if your connection is slow enough, the maximum is probably never reached. (Although all the memory will still be used as seekback-cache.) Remove the separate --audio-file-cache option, and use the cache default settings for it.
2014-05-19 21:27:09 +00:00
return;
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
player: reduce some timer calls
2016-04-20 08:50:22 +00:00
double now = mp_time_sec();
player: minor simplification to buffering property updates Strictly schedule an update in regular intervals as long as either stream cache or demuxer are prefetching. Don't update just always because the stream cache is enabled ("idle != -1") or cache-related properties are observed (mp_client_event_is_registered()). Also, the "idle" variable was awkard; get rid of it with equivalent code.
2016-04-20 08:41:09 +00:00
struct stream_cache_info c = {.idle = true};
demux_stream_control(mpctx->demuxer, STREAM_CTRL_GET_CACHE_INFO, &c);
player: fix basic playback The "buffering" logic was active even if the stream cache was disabled. This is contrary to what the manpage says. It also breaks playback because of another bug: the demuxer cache is smaller than 2 seconds, and thus the resume condition never becomes true. Explicitly run this code only if the stream cache is enabled. Also, fix the underlying problem of the breakage, and resume when the demuxer thread stops reading in any case, not just on EOF. Broken by previous commit. Unbreaks playback of local files.
2014-08-27 08:55:59 +00:00
player: better cache status on status line The cache percentage was useless. It showed how much of the total stream cache was in use, but since the cache size is something huge and unrelated to the bitrate or network speed, the information content of the percentage was rather low. Replace this with printing the duration of the demuxer-cached data, and the size of the stream cache in KB. I'm not completely sure about the formatting; suggestions are welcome. Note that it's not easy to know how much playback time the stream cache covers, so it's always in bytes.
2014-08-27 20:42:28 +00:00
struct demux_ctrl_reader_state s = {.idle = true, .ts_duration = -1};
demux_control(mpctx->demuxer, DEMUXER_CTRL_GET_READER_STATE, &s);
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
int cache_buffer = 100;
player: minor simplification to buffering property updates Strictly schedule an update in regular intervals as long as either stream cache or demuxer are prefetching. Don't update just always because the stream cache is enabled ("idle != -1") or cache-related properties are observed (mp_client_event_is_registered()). Also, the "idle" variable was awkard; get rid of it with equivalent code.
2016-04-20 08:41:09 +00:00
if (mpctx->restart_complete && c.size > 0) {
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
if (mpctx->paused && mpctx->paused_for_cache) {
player: dynamically change cache wait times Remove the hardcoded wait time of 2 seconds. Instead, adjust the wait time each time we unpause: if downloading the data took longer than its estimated playback time, increase the amount of data we wait for. If it's shorter, decrease it. The +/- is supposed to avoid oscillating between two values if the elapsed time and the wait time are similar. It's not sure if this actually helps with anything, but it can't harm.
2014-08-27 21:12:24 +00:00
if (!opts->cache_pausing || s.ts_duration >= mpctx->cache_wait_time
|| s.idle)
{
player: reduce some timer calls
2016-04-20 08:50:22 +00:00
double elapsed_time = now - mpctx->cache_stop_time;
player: dynamically change cache wait times Remove the hardcoded wait time of 2 seconds. Instead, adjust the wait time each time we unpause: if downloading the data took longer than its estimated playback time, increase the amount of data we wait for. If it's shorter, decrease it. The +/- is supposed to avoid oscillating between two values if the elapsed time and the wait time are similar. It's not sure if this actually helps with anything, but it can't harm.
2014-08-27 21:12:24 +00:00
if (elapsed_time > mpctx->cache_wait_time) {
mpctx->cache_wait_time *= 1.5 + 0.1;
} else {
mpctx->cache_wait_time /= 1.5 - 0.1;
}
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
mpctx->paused_for_cache = false;
if (!opts->pause)
unpause_player(mpctx);
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
force_update = true;
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
}
mpctx->sleeptime = MPMIN(mpctx->sleeptime, 0.2);
} else {
player: slightly better cache underrun detection Use the "native" underrun detection, instead of guessing by a low cache duration. The new underrun detection (which was added with the original commit) might have the problem that it's easy for the playloop to miss the underrun event. The underrun is actually not stored as state, so if the demuxer thread adds a new packet before the playloop happens to see the state, it's as if it never happened. On the other hand, this means that network was fast enough, so it should be just fine. Also, should it happen that we don't know the cached range (the ts_duration < 0 case), just wait until the demuxer goes idle (i.e. read_packet() decides to stop). This pretty much should affect broken or unusual files only, and there might be various things that could go wrong. But it's more robust in the normal case: this situation also happens when no packets have been read yet, and we don't want to consider this as reason to resume playback.
2014-08-27 20:51:06 +00:00
if (opts->cache_pausing && s.underrun) {
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
bool prev_paused_user = opts->pause;
pause_player(mpctx);
mpctx->paused_for_cache = true;
opts->pause = prev_paused_user;
player: reduce some timer calls
2016-04-20 08:50:22 +00:00
mpctx->cache_stop_time = now;
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
force_update = true;
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
command: add cache-buffering-state property
2014-10-07 20:07:07 +00:00
mpctx->cache_wait_time = MPCLAMP(mpctx->cache_wait_time, 1, 10);
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
if (mpctx->paused_for_cache) {
cache_buffer =
100 * MPCLAMP(s.ts_duration / mpctx->cache_wait_time, 0, 0.99);
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
client API: make "cache" property and similar observable Achieve this by polling. Will be used by the OSC. Basically a bad hack - but the point is that the mpv core itself is in the best position to improve this later.
2014-07-31 02:19:41 +00:00
// Also update cache properties.
player: minor simplification to buffering property updates Strictly schedule an update in regular intervals as long as either stream cache or demuxer are prefetching. Don't update just always because the stream cache is enabled ("idle != -1") or cache-related properties are observed (mp_client_event_is_registered()). Also, the "idle" variable was awkard; get rid of it with equivalent code.
2016-04-20 08:41:09 +00:00
bool busy = !s.idle || !c.idle;
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
if (busy || mpctx->next_cache_update > 0) {
client API: make "cache" property and similar observable Achieve this by polling. Will be used by the OSC. Basically a bad hack - but the point is that the mpv core itself is in the best position to improve this later.
2014-07-31 02:19:41 +00:00
if (mpctx->next_cache_update <= now) {
player: redo how stream caching and pausing on low cache works Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
2014-08-26 23:13:20 +00:00
mpctx->next_cache_update = busy ? now + 0.25 : 0;
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
force_update = true;
client API: make "cache" property and similar observable Achieve this by polling. Will be used by the OSC. Basically a bad hack - but the point is that the mpv core itself is in the best position to improve this later.
2014-07-31 02:19:41 +00:00
}
if (mpctx->next_cache_update > 0) {
mpctx->sleeptime =
MPMIN(mpctx->sleeptime, mpctx->next_cache_update - now);
}
}
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
if (mpctx->cache_buffer != cache_buffer) {
if (mpctx->cache_buffer >= 0 &&
(mpctx->cache_buffer == 100) != (cache_buffer == 100))
{
if (cache_buffer < 100) {
MP_VERBOSE(mpctx, "Enter buffering.\n");
} else {
player: reduce some timer calls
2016-04-20 08:50:22 +00:00
double t = now - mpctx->cache_stop_time;
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
MP_VERBOSE(mpctx, "End buffering (waited %f secs).\n", t);
}
}
mpctx->cache_buffer = cache_buffer;
force_update = true;
}
if (force_update)
mp_notify(mpctx, MP_EVENT_CACHE_UPDATE, NULL);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
int get_cache_buffering_percentage(struct MPContext *mpctx)
command: add cache-buffering-state property
2014-10-07 20:07:07 +00:00
{
player: simplify an aspect of buffering determination Calculate the buffering percentage in the same code which determines whether the player is or should be buffering. In particular it can't happen that percentage and buffering state are slightly out of sync due to calling DEMUXER_CTRL_GET_READER_STATE and reusing it with the previously determined buffering state. Now it's also easier to guarantee that the buffering state is updated properly. Add some more verbose output as well. (Damn I hate this code, why did I write it?)
2016-04-19 20:01:30 +00:00
return mpctx->demuxer ? mpctx->cache_buffer : -1;
command: add cache-buffering-state property
2014-10-07 20:07:07 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
static void handle_heartbeat_cmd(struct MPContext *mpctx)
{
struct MPOpts *opts = mpctx->opts;
player: move video display code out of the playloop Basically move the code from playloop.c to video.c. The new function write_video() now contains the code that was part of run_playloop(). There are no functional changes, except handling "new_frame_shown" slightly differently. This is done so that we don't need new a new MPContext field or a return value for write_video() to signal this condition. Instead, it's handled indirectly.
2014-07-30 21:24:08 +00:00
if (opts->heartbeat_cmd && !mpctx->paused && mpctx->video_out) {
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double now = mp_time_sec();
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
if (mpctx->next_heartbeat <= now) {
mpctx->next_heartbeat = now + opts->heartbeat_interval;
build: silence -Wunused-result For clang, it's enough to just put (void) around usages we are intentionally ignoring the result of. Since GCC does not seem to want to respect this decision, we are forced to disable the warning globally.
2016-06-07 11:39:43 +00:00
(void)system(opts->heartbeat_cmd);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
mpctx->sleeptime = MPMIN(mpctx->sleeptime, mpctx->next_heartbeat - now);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
static void handle_cursor_autohide(struct MPContext *mpctx)
{
struct MPOpts *opts = mpctx->opts;
struct vo *vo = mpctx->video_out;
if (!vo)
return;
bool mouse_cursor_visible = mpctx->mouse_cursor_visible;
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
double now = mp_time_sec();
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
unsigned mouse_event_ts = mp_input_get_mouse_event_counter(mpctx->input);
if (mpctx->mouse_event_ts != mouse_event_ts) {
mpctx->mouse_event_ts = mouse_event_ts;
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
mpctx->mouse_timer = now + opts->cursor_autohide_delay / 1000.0;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mouse_cursor_visible = true;
}
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
if (mpctx->mouse_timer > now) {
mpctx->sleeptime = MPMIN(mpctx->sleeptime, mpctx->mouse_timer - now);
} else {
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mouse_cursor_visible = false;
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
if (opts->cursor_autohide_delay == -1)
mouse_cursor_visible = true;
if (opts->cursor_autohide_delay == -2)
mouse_cursor_visible = false;
options: make mp_vo_opts options an actual sub-option group Just a minor refactor along the planned option change. This commit will make it easier to update (i.e. copy) the VO options without copying _all_ options. For now, behavior should be equivalent, though. (The VO options were put into a separate struct quite early - when all global variables were removed from the source code. It wasn't clear whether the separate struct would have any actual purpose, but it seems it will now. Awesome, huh.)
2016-08-30 21:50:57 +00:00
if (opts->cursor_autohide_fs && !opts->vo->fullscreen)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mouse_cursor_visible = true;
if (mouse_cursor_visible != mpctx->mouse_cursor_visible)
vo_control(vo, VOCTRL_SET_CURSOR_VISIBILITY, &mouse_cursor_visible);
mpctx->mouse_cursor_visible = mouse_cursor_visible;
}
command: make window-scale property observable Add a generic mechanism to the VO to relay "extra" events from VO to player. Use it to notify the core of window resizes, which in turn will be used to mark all affected properties ("window-scale" in this case) as changed. (I refrained from hacking this as internal command into input_ctx, or to poll the state change, etc. - but in the end, maybe it would be best to actually pass the client API context directly to the places where events can happen.)
2014-11-02 19:26:51 +00:00
static void handle_vo_events(struct MPContext *mpctx)
{
struct vo *vo = mpctx->video_out;
video/out: minor simplification to event query function The "clear" parameter is confusing and useless.
2014-11-09 09:00:21 +00:00
int events = vo ? vo_query_and_reset_events(vo, VO_EVENTS_USER) : 0;
command: make window-scale property observable Add a generic mechanism to the VO to relay "extra" events from VO to player. Use it to notify the core of window resizes, which in turn will be used to mark all affected properties ("window-scale" in this case) as changed. (I refrained from hacking this as internal command into input_ctx, or to poll the state change, etc. - but in the end, maybe it would be best to actually pass the client API context directly to the places where events can happen.)
2014-11-02 19:26:51 +00:00
if (events & VO_EVENT_RESIZE)
mp_notify(mpctx, MP_EVENT_WIN_RESIZE, NULL);
command: add window-minimized property (X11 only) More or less requested by #1237. Should be simple to extend this to other backends.
2014-11-02 19:48:45 +00:00
if (events & VO_EVENT_WIN_STATE)
mp_notify(mpctx, MP_EVENT_WIN_STATE, NULL);
command: make window-scale property observable Add a generic mechanism to the VO to relay "extra" events from VO to player. Use it to notify the core of window resizes, which in turn will be used to mark all affected properties ("window-scale" in this case) as changed. (I refrained from hacking this as internal command into input_ctx, or to poll the state change, etc. - but in the end, maybe it would be best to actually pass the client API context directly to the places where events can happen.)
2014-11-02 19:26:51 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
static void handle_sstep(struct MPContext *mpctx)
{
struct MPOpts *opts = mpctx->opts;
player: some further playloop cleanups Handle --term-playing-msg at a better place. Move MPV_EVENT_TICK hack into a separate function. Also add some words to the client API that you shouldn't use it. (But better leave breaking it for later.) Handle --frames and frame_step differently. Remove the mess from the playloop, and do it after frame display. Give up on the weird semantics for audio-only mode (they didn't make sense anyway), and adjust the manpage accordingly.
2014-08-03 18:25:03 +00:00
if (mpctx->stop_play || !mpctx->restart_complete)
return;
if (opts->step_sec > 0 && !mpctx->paused) {
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
set_osd_function(mpctx, OSD_FFW);
player: allow passing flags to queue_seek() Change the last parameter from a bool to an int, which is supposed to take bit-flags. The at this point only flag is MPSEEK_FLAG_DELAY, which replaces the previous bool parameter. The old false parameter becomes 0, the old true parameter becomes MPSEEK_FLAG_DELAY. Since the old "immediate" parameter is now essentially inverted, two coalesced immediate and delayed seeks end up as delayed instead of immediate. This change doesn't matter, since there are no relative immediate seeks anyway.
2016-08-15 19:07:32 +00:00
queue_seek(mpctx, MPSEEK_RELATIVE, opts->step_sec, MPSEEK_DEFAULT, 0);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: some further playloop cleanups Handle --term-playing-msg at a better place. Move MPV_EVENT_TICK hack into a separate function. Also add some words to the client API that you shouldn't use it. (But better leave breaking it for later.) Handle --frames and frame_step differently. Remove the mess from the playloop, and do it after frame display. Give up on the weird semantics for audio-only mode (they didn't make sense anyway), and adjust the manpage accordingly.
2014-08-03 18:25:03 +00:00
player: fix weird behavior when framestepping over format changes When video format changes, the frame before the frame with the new format sets video_status briefly to STATUS_DRAINING. This caused the code to handle the EOF case to kick in, which just pauses the player when trying to step past the last frame. As a result, trying to framestep over format changes resulted in pausing the player. Fix by testing against the correct status.
2014-08-26 18:45:41 +00:00
if (mpctx->video_status >= STATUS_EOF) {
player: never overwrite stop_play field This is a real pain: if a quit command is received, it's set to PT_QUIT. And then other code could overwrite it, making it not quit. The annoying bit is that stop_play is written and read in many places. Just not overwriting it unconditionally seems to be the best course of action.
2015-07-08 19:31:31 +00:00
if (mpctx->max_frames >= 0 && !mpctx->stop_play)
player: fix --frames This could produce an extra frame, because reaching the maximum merely signals the playloop to exit, without strictly enforcing the limit. Fixes #1181. CC: @mpv-player/stable
2014-10-14 11:29:38 +00:00
mpctx->stop_play = AT_END_OF_FILE; // force EOF even if audio left
player: some further playloop cleanups Handle --term-playing-msg at a better place. Move MPV_EVENT_TICK hack into a separate function. Also add some words to the client API that you shouldn't use it. (But better leave breaking it for later.) Handle --frames and frame_step differently. Remove the mess from the playloop, and do it after frame display. Give up on the weird semantics for audio-only mode (they didn't make sense anyway), and adjust the manpage accordingly.
2014-08-03 18:25:03 +00:00
if (mpctx->step_frames > 0 && !mpctx->paused)
pause_player(mpctx);
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: add a --loop-file option Unlike --loop, loops a file instead of the playlist.
2014-04-17 21:55:04 +00:00
static void handle_loop_file(struct MPContext *mpctx)
{
struct MPOpts *opts = mpctx->opts;
player: make looping slightly more seamless This affects A-B loops and --loop-file, and audio. Instead of dropping audio by resetting the AO, try to make it seamless by not sending data after the loop point, and after the seek send new data without a reset.
2016-08-18 18:40:23 +00:00
if (mpctx->stop_play == AT_END_OF_FILE &&
(opts->ab_loop[0] != MP_NOPTS_VALUE || opts->ab_loop[1] != MP_NOPTS_VALUE))
{
// Assumes execute_queued_seek() happens before next audio/video is
// attempted to be decoded or filtered.
mpctx->stop_play = KEEP_PLAYING;
double start = 0;
if (opts->ab_loop[0] != MP_NOPTS_VALUE)
start = opts->ab_loop[0];
mark_seek(mpctx);
queue_seek(mpctx, MPSEEK_ABSOLUTE, start, MPSEEK_EXACT,
MPSEEK_FLAG_NOFLUSH);
}
player: add a --loop-file option Unlike --loop, loops a file instead of the playlist.
2014-04-17 21:55:04 +00:00
if (opts->loop_file && mpctx->stop_play == AT_END_OF_FILE) {
player: don't quit with --loop-file Fixes #1009. CC: @mpv-player/stable
2014-08-13 19:50:01 +00:00
mpctx->stop_play = KEEP_PLAYING;
player: add a --loop-file option Unlike --loop, loops a file instead of the playlist.
2014-04-17 21:55:04 +00:00
set_osd_function(mpctx, OSD_FFW);
player: make looping slightly more seamless This affects A-B loops and --loop-file, and audio. Instead of dropping audio by resetting the AO, try to make it seamless by not sending data after the loop point, and after the seek send new data without a reset.
2016-08-18 18:40:23 +00:00
queue_seek(mpctx, MPSEEK_ABSOLUTE, 0, MPSEEK_DEFAULT, MPSEEK_FLAG_NOFLUSH);
player: allow passing number of loops to --loop-file E.g. --loop-file=2 will play the file 3 times (one time normally, and 2 repeats). Minor syntax issue: "--loop-file 5" won't work, you have to use "--loop-file=5". This is because "--loop-file" still has to work for compatibility, so the "old" syntax with a space between option name and value can't work.
2014-09-22 20:56:00 +00:00
if (opts->loop_file > 0)
opts->loop_file--;
player: add a --loop-file option Unlike --loop, loops a file instead of the playlist.
2014-04-17 21:55:04 +00:00
}
}
player: make chapter seek to end jump to last frame with --keep-open There were complaints that a chapter seek past the last chapter was quitting the player. Change the behavior to what is expected: the last frame. If no chapters are available, this still does nothing.
2014-12-08 16:27:07 +00:00
void seek_to_last_frame(struct MPContext *mpctx)
player: when seeking past EOF with --keep-open, seek to last frame It feels strange that seeking past EOF with --keep-open actually leaves the player at a random position. You can't even unpause, because the demuxer is in the EOF state, and what you see on screen is just what was around before the seek. Improve this by attempting to seek to the last video frame if EOF happens. We explicitly don't do this if EOF was reached normally to increase robustness (if the VO got a frame since the last seek, it obviously means we had normal playback before EOF). If an error happens when trying to find the last frame (such as not actually finding a last frame because e.g. the demuxer misbehaves), this will probably turn your CPU into a heater. There is no logic to prevent reinitiating the last-frame search if the last-frame search reached EOF. (Pausing usually prevents that EOF is reached again after a successful last-frame search.) Fixes #819.
2014-12-07 01:47:09 +00:00
{
player: refactor: eliminate MPContext.d_video Eventually we want the VO be driven by a A->V filter, so a decoder doesn't even have to exist. Some features definitely require a decoder though (like reporting the decoder in use, hardware decoding, etc.), so for each thing which accessed d_video, it has to be redecided if and how it can access decoder state. At least the "framedrop" property slightly changes semantics: you can now always set this property, even if no video is active. Some untested changes in this commit, but our bio-based distributed test suite has to take care of this.
2016-01-17 17:07:50 +00:00
if (!mpctx->vo_chain)
player: when seeking past EOF with --keep-open, seek to last frame It feels strange that seeking past EOF with --keep-open actually leaves the player at a random position. You can't even unpause, because the demuxer is in the EOF state, and what you see on screen is just what was around before the seek. Improve this by attempting to seek to the last video frame if EOF happens. We explicitly don't do this if EOF was reached normally to increase robustness (if the VO got a frame since the last seek, it obviously means we had normal playback before EOF). If an error happens when trying to find the last frame (such as not actually finding a last frame because e.g. the demuxer misbehaves), this will probably turn your CPU into a heater. There is no logic to prevent reinitiating the last-frame search if the last-frame search reached EOF. (Pausing usually prevents that EOF is reached again after a successful last-frame search.) Fixes #819.
2014-12-07 01:47:09 +00:00
return;
player: hack against --keep-open misbehaving with broken files If a file (or a demuxer) is broken, seeking close to the end of the file doesn't work, and seek_to_last_frame() will be called over and over again, burning CPU for no reason. Observed with incomplete mp4 files. That this can happen was already mentioned in commit 090f6cfc, but I guess now I'll do something against it. hrseek_lastframe is cleared by reset_playback_state(), so it's only set if seek_to_last_frame() was called, and no other seek happened since then. If finding the last frame succeeds, no EOF will happen (unless the user unpauses, but then it will simply remain at the last frame). If it fails, then it will return immediately, without retrying.
2014-12-24 14:12:11 +00:00
if (mpctx->hrseek_lastframe) // exit if we already tried this
return;
player: when seeking past EOF with --keep-open, seek to last frame It feels strange that seeking past EOF with --keep-open actually leaves the player at a random position. You can't even unpause, because the demuxer is in the EOF state, and what you see on screen is just what was around before the seek. Improve this by attempting to seek to the last video frame if EOF happens. We explicitly don't do this if EOF was reached normally to increase robustness (if the VO got a frame since the last seek, it obviously means we had normal playback before EOF). If an error happens when trying to find the last frame (such as not actually finding a last frame because e.g. the demuxer misbehaves), this will probably turn your CPU into a heater. There is no logic to prevent reinitiating the last-frame search if the last-frame search reached EOF. (Pausing usually prevents that EOF is reached again after a successful last-frame search.) Fixes #819.
2014-12-07 01:47:09 +00:00
MP_VERBOSE(mpctx, "seeking to last frame...\n");
// Approximately seek close to the end of the file.
// Usually, it will seek some seconds before end.
double end = get_play_end_pts(mpctx);
if (end == MP_NOPTS_VALUE)
end = get_time_length(mpctx);
mp_seek(mpctx, (struct seek_params){
.type = MPSEEK_ABSOLUTE,
.amount = end,
player: use symbolic constant for seek precision Meh.
2015-03-04 16:21:05 +00:00
.exact = MPSEEK_VERY_EXACT,
player: remove old timeline/ordered chapters support
2016-02-15 20:03:51 +00:00
});
player: when seeking past EOF with --keep-open, seek to last frame It feels strange that seeking past EOF with --keep-open actually leaves the player at a random position. You can't even unpause, because the demuxer is in the EOF state, and what you see on screen is just what was around before the seek. Improve this by attempting to seek to the last video frame if EOF happens. We explicitly don't do this if EOF was reached normally to increase robustness (if the VO got a frame since the last seek, it obviously means we had normal playback before EOF). If an error happens when trying to find the last frame (such as not actually finding a last frame because e.g. the demuxer misbehaves), this will probably turn your CPU into a heater. There is no logic to prevent reinitiating the last-frame search if the last-frame search reached EOF. (Pausing usually prevents that EOF is reached again after a successful last-frame search.) Fixes #819.
2014-12-07 01:47:09 +00:00
// Make it exact: stop seek only if last frame was reached.
if (mpctx->hrseek_active) {
mpctx->hrseek_pts = 1e99; // "infinite"
mpctx->hrseek_lastframe = true;
}
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
static void handle_keep_open(struct MPContext *mpctx)
{
struct MPOpts *opts = mpctx->opts;
player: change --keep-open semantics By popular request.
2014-09-23 23:56:53 +00:00
if (opts->keep_open && mpctx->stop_play == AT_END_OF_FILE &&
player: add a --keep-open=always mode The --keep-open behavior was recently changed to act only on the last file due to user requests (see commit 735a9c39). But the old behavior was useful too, so bring it back as an additional mode. Fixes #1332 (or rather, should help with it).
2014-12-12 22:45:16 +00:00
(opts->keep_open == 2 || !playlist_get_next(mpctx->playlist, 1)) &&
player: add a --loop=force mode Requested. See manpage additions. This also makes the magical loop_times constants slightly saner, but shouldn't change the semantics of any existing --loop option values.
2015-02-12 21:41:45 +00:00
opts->loop_times == 1)
player: change --keep-open semantics By popular request.
2014-09-23 23:56:53 +00:00
{
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->stop_play = KEEP_PLAYING;
player: refactor: eliminate MPContext.d_video Eventually we want the VO be driven by a A->V filter, so a decoder doesn't even have to exist. Some features definitely require a decoder though (like reporting the decoder in use, hardware decoding, etc.), so for each thing which accessed d_video, it has to be redecided if and how it can access decoder state. At least the "framedrop" property slightly changes semantics: you can now always set this property, even if no video is active. Some untested changes in this commit, but our bio-based distributed test suite has to take care of this.
2016-01-17 17:07:50 +00:00
if (mpctx->vo_chain) {
player: when seeking past EOF with --keep-open, seek to last frame It feels strange that seeking past EOF with --keep-open actually leaves the player at a random position. You can't even unpause, because the demuxer is in the EOF state, and what you see on screen is just what was around before the seek. Improve this by attempting to seek to the last video frame if EOF happens. We explicitly don't do this if EOF was reached normally to increase robustness (if the VO got a frame since the last seek, it obviously means we had normal playback before EOF). If an error happens when trying to find the last frame (such as not actually finding a last frame because e.g. the demuxer misbehaves), this will probably turn your CPU into a heater. There is no logic to prevent reinitiating the last-frame search if the last-frame search reached EOF. (Pausing usually prevents that EOF is reached again after a successful last-frame search.) Fixes #819.
2014-12-07 01:47:09 +00:00
if (!vo_has_frame(mpctx->video_out)) // EOF not reached normally
seek_to_last_frame(mpctx);
player: show correct playback time with --keep-open --no-video Whatever.
2014-09-23 23:37:07 +00:00
mpctx->playback_pts = mpctx->last_vo_pts;
player: when seeking past EOF with --keep-open, seek to last frame It feels strange that seeking past EOF with --keep-open actually leaves the player at a random position. You can't even unpause, because the demuxer is in the EOF state, and what you see on screen is just what was around before the seek. Improve this by attempting to seek to the last video frame if EOF happens. We explicitly don't do this if EOF was reached normally to increase robustness (if the VO got a frame since the last seek, it obviously means we had normal playback before EOF). If an error happens when trying to find the last frame (such as not actually finding a last frame because e.g. the demuxer misbehaves), this will probably turn your CPU into a heater. There is no logic to prevent reinitiating the last-frame search if the last-frame search reached EOF. (Pausing usually prevents that EOF is reached again after a successful last-frame search.) Fixes #819.
2014-12-07 01:47:09 +00:00
}
player: fix time display wheen seeking past EOF with --keep-open Regression since commit 261506e3. Internally speaking, playback was often not properly terminated, and the main part of handle_keep_open() was just executed once, instead of any time the user tries to seek. This means playback_pts was not set, and the "current time" was determined by the seek target PTS. So fix this aspect of video EOF handling, and also remove the now unnecessary eof_reached field. The pause check before calling pause_player() is a lazy workaround for a strange event feedback loop that happens on EOF with --keep-open.
2014-07-29 22:22:25 +00:00
if (!mpctx->opts->pause)
pause_player(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
client API: add chapter change event Also works for mpv_observe_property() on the "chapter" property.
2014-04-27 20:28:07 +00:00
static void handle_chapter_change(struct MPContext *mpctx)
{
int chapter = get_current_chapter(mpctx);
if (chapter != mpctx->last_chapter) {
mpctx->last_chapter = chapter;
mp_notify(mpctx, MPV_EVENT_CHAPTER_CHANGE, NULL);
}
}
player: some more --force-window fixes Sigh... After the recent changes, another regression appeared. This time, the VO window wasn't cleared when changing from video to a non- video file (such as audio-only with no cover art). Fix this by properly taking the handle_force_window() bool parameter into account. Also, the info message could be printed twice, which is harmless but ugly. So just remove the message. Also, do some more minor cleanups (like fixing the comment, which was completely outdated).
2015-09-21 19:22:20 +00:00
// Execute a forceful refresh of the VO window. This clears the window from
// the previous video. It also creates/destroys the VO on demand.
// It tries to make the change only in situations where the window is
// definitely needed or not needed, or if the force parameter is set (the
// latter also decides whether to clear an existing window, because there's
// no way to know if this has already been done or not).
int handle_force_window(struct MPContext *mpctx, bool force)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
player: some more --force-window fixes Sigh... After the recent changes, another regression appeared. This time, the VO window wasn't cleared when changing from video to a non- video file (such as audio-only with no cover art). Fix this by properly taking the handle_force_window() bool parameter into account. Also, the info message could be printed twice, which is harmless but ugly. So just remove the message. Also, do some more minor cleanups (like fixing the comment, which was completely outdated).
2015-09-21 19:22:20 +00:00
// True if we're either in idle mode, or loading of the file has finished.
// It's also set via force in some stages during file loading.
bool act = !mpctx->playing || mpctx->playback_initialized || force;
player: honor --force-window if video is selected, but inactive If a video track is selected, but no video is decoded from it (mostly with broken files), then create the window anyway.
2016-02-24 21:19:00 +00:00
// On the other hand, if a video track is selected, but no video is ever
// decoded on it, then create the window.
bool stalled_video = mpctx->playback_initialized && mpctx->restart_complete &&
mpctx->video_status == STATUS_EOF && mpctx->vo_chain &&
player: fix --force-window behavior _Of course_ the previous commit broke --force-window behavior (like it does every single time I touch it). vo_has_frame() gets cleared after a seek, so e.g. stopping playback of a file and going to the next by keeping the seek key down will enter a short moment without video at the end of the first file, which will set the stalled_video variable to true. Prevent it by using the indication whether the window was properly created (which is probably exactly what we want here). This function is also responsible for destroying the window when needed, and obviously we should never do that while video is active. (This is the actual bug, although the other change in this commit already hides the common breakage it caused.)
2016-02-25 10:21:54 +00:00
!mpctx->video_out->config_ok;
player: honor --force-window if video is selected, but inactive If a video track is selected, but no video is decoded from it (mostly with broken files), then create the window anyway.
2016-02-24 21:19:00 +00:00
// Don't interfere with real video playback
if (mpctx->vo_chain && !stalled_video)
return 0;
player: make force-window in auto-profiles actually work The previous commit was incomplete (and I didn't notice due to a broken test procedure). The annoying part is that actually creating the VO was separate; redo this and merge the code for this into handle_force_window() as well. This will also make implementing proper reaction to runtime option changes easier. (Only the part for actually listening to option changes is missing.)
2015-09-20 15:58:02 +00:00
if (!mpctx->opts->force_vo) {
player: fix --force-window behavior _Of course_ the previous commit broke --force-window behavior (like it does every single time I touch it). vo_has_frame() gets cleared after a seek, so e.g. stopping playback of a file and going to the next by keeping the seek key down will enter a short moment without video at the end of the first file, which will set the stalled_video variable to true. Prevent it by using the indication whether the window was properly created (which is probably exactly what we want here). This function is also responsible for destroying the window when needed, and obviously we should never do that while video is active. (This is the actual bug, although the other change in this commit already hides the common breakage it caused.)
2016-02-25 10:21:54 +00:00
if (act && !mpctx->vo_chain)
player: do not destroy VO prematurely when initializing playback If --force-window wasn't used, this would destroy the VO while a file is still being loaded, resulting in flicker and other interruptions when switching from one playlist entry to another. Recent regression. The condition used here is pretty tricky, but it boils down to that it should trigger either in idle mode, or when loading has been fully done (at these points we definitely know whether the VO will be needed).
2015-09-20 21:03:00 +00:00
uninit_video_out(mpctx);
player: make force-window in auto-profiles actually work The previous commit was incomplete (and I didn't notice due to a broken test procedure). The annoying part is that actually creating the VO was separate; redo this and merge the code for this into handle_force_window() as well. This will also make implementing proper reaction to runtime option changes easier. (Only the part for actually listening to option changes is missing.)
2015-09-20 15:58:02 +00:00
return 0;
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: some more --force-window fixes Sigh... After the recent changes, another regression appeared. This time, the VO window wasn't cleared when changing from video to a non- video file (such as audio-only with no cover art). Fix this by properly taking the handle_force_window() bool parameter into account. Also, the info message could be printed twice, which is harmless but ugly. So just remove the message. Also, do some more minor cleanups (like fixing the comment, which was completely outdated).
2015-09-21 19:22:20 +00:00
if (mpctx->opts->force_vo != 2 && !act)
return 0;
player: make force-window in auto-profiles actually work The previous commit was incomplete (and I didn't notice due to a broken test procedure). The annoying part is that actually creating the VO was separate; redo this and merge the code for this into handle_force_window() as well. This will also make implementing proper reaction to runtime option changes easier. (Only the part for actually listening to option changes is missing.)
2015-09-20 15:58:02 +00:00
if (!mpctx->video_out) {
struct vo_extra ex = {
.input_ctx = mpctx->input,
.osd = mpctx->osd,
.encode_lavc_ctx = mpctx->encode_lavc_ctx,
player: make --force-window work with opengl-cb No reason not to? This probably avoids surprises if someone really tries to combine them.
2016-08-30 21:44:28 +00:00
.opengl_cb_context = mpctx->gl_cb_ctx,
player: make force-window in auto-profiles actually work The previous commit was incomplete (and I didn't notice due to a broken test procedure). The annoying part is that actually creating the VO was separate; redo this and merge the code for this into handle_force_window() as well. This will also make implementing proper reaction to runtime option changes easier. (Only the part for actually listening to option changes is missing.)
2015-09-20 15:58:02 +00:00
};
mpctx->video_out = init_best_video_out(mpctx->global, &ex);
if (!mpctx->video_out)
goto err;
mpctx->mouse_cursor_visible = true;
}
player: some more --force-window fixes Sigh... After the recent changes, another regression appeared. This time, the VO window wasn't cleared when changing from video to a non- video file (such as audio-only with no cover art). Fix this by properly taking the handle_force_window() bool parameter into account. Also, the info message could be printed twice, which is harmless but ugly. So just remove the message. Also, do some more minor cleanups (like fixing the comment, which was completely outdated).
2015-09-21 19:22:20 +00:00
if (!mpctx->video_out->config_ok || force) {
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
struct vo *vo = mpctx->video_out;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
// Pick whatever works
int config_format = 0;
video: batch query_format calls There are currently 568 pixel formats (actually fewer, but the namespace is this big), and for each format elaborate synchronization was done to call it synchronously on the VO. This is completely unnecessary, and we can do with just a single call.
2015-01-03 16:23:01 +00:00
uint8_t fmts[IMGFMT_END - IMGFMT_START] = {0};
vo_query_formats(vo, fmts);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
for (int fmt = IMGFMT_START; fmt < IMGFMT_END; fmt++) {
video: batch query_format calls There are currently 568 pixel formats (actually fewer, but the namespace is this big), and for each format elaborate synchronization was done to call it synchronously on the VO. This is completely unnecessary, and we can do with just a single call.
2015-01-03 16:23:01 +00:00
if (fmts[fmt - IMGFMT_START]) {
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
config_format = fmt;
break;
}
}
int w = 960;
int h = 480;
struct mp_image_params p = {
.imgfmt = config_format,
.w = w, .h = h,
video: switch from using display aspect to sample aspect MPlayer traditionally always used the display aspect ratio, e.g. 16:9, while FFmpeg uses the sample (aka pixel) aspect ratio. Both have a bunch of advantages and disadvantages. Actually, it seems using sample aspect ratio is generally nicer. The main reason for the change is making mpv closer to how FFmpeg works in order to make life easier. It's also nice that everything uses integer fractions instead of floats now (except --video-aspect option/property). Note that there is at least 1 user-visible change: vf_dsize now does not set the display size, only the display aspect ratio. This is because the image_params d_w/d_h fields did not just set the display aspect, but also the size (except in encoding mode).
2015-12-19 19:04:31 +00:00
.p_w = 1, .p_h = 1,
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
};
video/out: remove an unused parameter This parameter has been unused for years (the last flag was removed in commit d658b115). Get rid of it. This affects the general VO API, as well as the vo_opengl backend API, so it touches a lot of files. The VOFLAGs are still used to control OpenGL context creation, so move them to the OpenGL backend code.
2015-10-03 16:20:16 +00:00
if (vo_reconfig(vo, &p) < 0)
player: make force-window in auto-profiles actually work The previous commit was incomplete (and I didn't notice due to a broken test procedure). The annoying part is that actually creating the VO was separate; redo this and merge the code for this into handle_force_window() as well. This will also make implementing proper reaction to runtime option changes easier. (Only the part for actually listening to option changes is missing.)
2015-09-20 15:58:02 +00:00
goto err;
player: reset some VO state when video is terminated Useful for idle mode or if video is switched off during playback, and --force-window is used.
2014-09-08 22:54:34 +00:00
vo_control(vo, VOCTRL_RESTORE_SCREENSAVER, NULL);
vo_set_paused(vo, true);
video/out: change aspects of OSD handling Let the VOs draw the OSD on their own, instead of making OSD drawing a separate VO driver call. Further, let it be the VOs responsibility to request subtitles with the correct PTS. We also basically allow the VO to request OSD/subtitles at any time. OSX changes untested.
2014-06-15 18:46:57 +00:00
vo_redraw(vo);
client API: add events for video and audio reconfig
2014-02-17 01:52:26 +00:00
mp_notify(mpctx, MPV_EVENT_VIDEO_RECONFIG, NULL);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: make force-window in auto-profiles actually work The previous commit was incomplete (and I didn't notice due to a broken test procedure). The annoying part is that actually creating the VO was separate; redo this and merge the code for this into handle_force_window() as well. This will also make implementing proper reaction to runtime option changes easier. (Only the part for actually listening to option changes is missing.)
2015-09-20 15:58:02 +00:00
return 0;
err:
mpctx->opts->force_vo = 0;
uninit_video_out(mpctx);
MP_FATAL(mpctx, "Error opening/initializing the VO window.\n");
return -1;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: some further playloop cleanups Handle --term-playing-msg at a better place. Move MPV_EVENT_TICK hack into a separate function. Also add some words to the client API that you shouldn't use it. (But better leave breaking it for later.) Handle --frames and frame_step differently. Remove the mess from the playloop, and do it after frame display. Give up on the weird semantics for audio-only mode (they didn't make sense anyway), and adjust the manpage accordingly.
2014-08-03 18:25:03 +00:00
// Potentially needed by some Lua scripts, which assume TICK always comes.
static void handle_dummy_ticks(struct MPContext *mpctx)
{
if (mpctx->video_status == STATUS_EOF || mpctx->paused) {
player: increase tick event update frequency 500ms is a bit too high. Change it to 50ms. This improves client API (and Lua) playback state update frequency. Updating absolutely every time the audio PTS changes would be possible, but is not helpful. Audio samplerates are high to trigger a wakeup feedback loop, so the process would waste CPU time on updating the playback position all the time. (If a client application wants to ensure smooth update of the playback position, it should update the position manually using a timer and by reading the property - the application can make a much better decision at how often the playback has to happen.)
2015-06-23 17:21:20 +00:00
if (mp_time_sec() - mpctx->last_idle_tick > 0.050) {
player: some further playloop cleanups Handle --term-playing-msg at a better place. Move MPV_EVENT_TICK hack into a separate function. Also add some words to the client API that you shouldn't use it. (But better leave breaking it for later.) Handle --frames and frame_step differently. Remove the mess from the playloop, and do it after frame display. Give up on the weird semantics for audio-only mode (they didn't make sense anyway), and adjust the manpage accordingly.
2014-08-03 18:25:03 +00:00
mpctx->last_idle_tick = mp_time_sec();
mp_notify(mpctx, MPV_EVENT_TICK, NULL);
}
}
}
player: restore usual seeking behavior Commit 786f37ae accidentally changed seeking behavior such that continuous seeking (holding the seek button down) would use the previous seek target timestamp, instead of the new video timestamp. (This is for the default mode, seeking to keyframes.) The result is that the movement on the seekbar is smooth, but the way the video updates is awkward. Some might actually prefer the new behavior (and some players effectively show similar bahavior), but I don't. So restore the old behavior. This is done in two steps: First: strictly wait for the entire seek process to finish, which will effectively make the seeking code pick up the new video timestamp correctly. This would play audio immediately, which would result in noise during continuous seeking, which leads to second: explicitly abort the playback restarting process if this case is detected, and never play audio.
2016-05-09 20:54:49 +00:00
// Update current playback time.
static void handle_playback_time(struct MPContext *mpctx)
{
if (mpctx->vo_chain && !mpctx->vo_chain->is_coverart &&
mpctx->video_status >= STATUS_PLAYING &&
mpctx->video_status < STATUS_EOF)
{
mpctx->playback_pts = mpctx->video_pts;
} else if (mpctx->audio_status >= STATUS_PLAYING &&
mpctx->audio_status < STATUS_EOF)
{
mpctx->playback_pts = playing_audio_pts(mpctx);
}
}
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
// We always make sure audio and video buffers are filled before actually
// starting playback. This code handles starting them at the same time.
player: minor simplification No need to pass endpts down in such a dumb way. Also remove an outdated comment somewhere.
2016-02-27 19:02:51 +00:00
static void handle_playback_restart(struct MPContext *mpctx)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
struct MPOpts *opts = mpctx->opts;
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
if (mpctx->audio_status < STATUS_READY ||
mpctx->video_status < STATUS_READY)
return;
if (mpctx->video_status == STATUS_READY) {
mpctx->video_status = STATUS_PLAYING;
get_relative_time(mpctx);
mpctx->sleeptime = 0;
}
player: restore usual seeking behavior Commit 786f37ae accidentally changed seeking behavior such that continuous seeking (holding the seek button down) would use the previous seek target timestamp, instead of the new video timestamp. (This is for the default mode, seeking to keyframes.) The result is that the movement on the seekbar is smooth, but the way the video updates is awkward. Some might actually prefer the new behavior (and some players effectively show similar bahavior), but I don't. So restore the old behavior. This is done in two steps: First: strictly wait for the entire seek process to finish, which will effectively make the seeking code pick up the new video timestamp correctly. This would play audio immediately, which would result in noise during continuous seeking, which leads to second: explicitly abort the playback restarting process if this case is detected, and never play audio.
2016-05-09 20:54:49 +00:00
if (mpctx->audio_status == STATUS_READY) {
// If a new seek is queued while the current one finishes, don't
// actually play the audio, but resume seeking immediately.
if (mpctx->seek.type && mpctx->video_status == STATUS_PLAYING) {
handle_playback_time(mpctx);
execute_queued_seek(mpctx);
return;
}
player: minor simplification No need to pass endpts down in such a dumb way. Also remove an outdated comment somewhere.
2016-02-27 19:02:51 +00:00
fill_audio_out_buffers(mpctx); // actually play prepared buffer
player: restore usual seeking behavior Commit 786f37ae accidentally changed seeking behavior such that continuous seeking (holding the seek button down) would use the previous seek target timestamp, instead of the new video timestamp. (This is for the default mode, seeking to keyframes.) The result is that the movement on the seekbar is smooth, but the way the video updates is awkward. Some might actually prefer the new behavior (and some players effectively show similar bahavior), but I don't. So restore the old behavior. This is done in two steps: First: strictly wait for the entire seek process to finish, which will effectively make the seeking code pick up the new video timestamp correctly. This would play audio immediately, which would result in noise during continuous seeking, which leads to second: explicitly abort the playback restarting process if this case is detected, and never play audio.
2016-05-09 20:54:49 +00:00
}
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
if (!mpctx->restart_complete) {
mpctx->hrseek_active = false;
mpctx->restart_complete = true;
player: gross hack to improve non-hr seeking with external audio tracks Relative seeks backwards with external audio tracks does not always work well: it tends to happen that video seek back further than audio, so audio will remain silent until the audio's after-seek position is reached. This happens because we strictly seek both video and audio demuxer to the approximate desirted target PTS, and then start decoding from that. Commit 81358380 removes an older method that was supposed to deal with this. It was sort of bad, because it could lead to the playback core freezing by waiting on network. Ideally, the demuxer layer would probably somehow deal with such seeks, and do them in a way the audio is seeked after video. Currently this is infeasible, because the demuxer layer assumes a single demuxer, and external tracks simply use separate demuxer layers. (MPlayer actually had a pseudo-demuxer that joined external tracks into a single demuxer, but this is not flexible enough - and also, the demuxer layer as it currently exists can't deal with dynamically removing external tracks either. Maybe some time in the future.) Instead, add a gross hack, that essentially reseeks the audio if it detects that it's too far off. The result is actually not too bad, because we can reuse the mechanism that is used for instant track switching. This way we can make sure of the right position, without having to care about certain other issues. It should be noted that if the audio demuxer is used for other tracks too, and the demuxer does not support refresh seeking, audio will probably be off by even a higher amount. But this should be rare.
2016-08-07 14:29:13 +00:00
mpctx->audio_allow_second_chance_seek = false;
player: make looping slightly more seamless This affects A-B loops and --loop-file, and audio. Instead of dropping audio by resetting the AO, try to make it seamless by not sending data after the loop point, and after the seek send new data without a reset.
2016-08-18 18:40:23 +00:00
handle_playback_time(mpctx);
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
mp_notify(mpctx, MPV_EVENT_PLAYBACK_RESTART, NULL);
if (!mpctx->playing_msg_shown) {
player: allow unsetting --term/osd-playing-msg Treat an empty string as unset. The fact that the option values can be NULL is merely weirdness due to how the option parser works (it unfortunately doesn't initialize string fields to non-NULL).
2015-02-18 20:10:08 +00:00
if (opts->playing_msg && opts->playing_msg[0]) {
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
char *msg =
mp_property_expand_escaped_string(mpctx, opts->playing_msg);
player: put --term-playing-msg in a separate log category Fixes #1983.
2015-07-13 11:06:09 +00:00
struct mp_log *log = mp_log_new(NULL, mpctx->log, "!term-msg");
mp_info(log, "%s\n", msg);
talloc_free(log);
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
talloc_free(msg);
}
player: allow unsetting --term/osd-playing-msg Treat an empty string as unset. The fact that the option values can be NULL is merely weirdness due to how the option parser works (it unfortunately doesn't initialize string fields to non-NULL).
2015-02-18 20:10:08 +00:00
if (opts->osd_playing_msg && opts->osd_playing_msg[0]) {
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
char *msg =
mp_property_expand_escaped_string(mpctx, opts->osd_playing_msg);
set_osd_msg(mpctx, 1, opts->osd_duration, "%s", msg);
talloc_free(msg);
}
}
mpctx->playing_msg_shown = true;
player: force wakeup on playback restart Just a theoretical issue, most likely.
2016-04-20 11:11:11 +00:00
mpctx->sleeptime = 0;
player: make looping slightly more seamless This affects A-B loops and --loop-file, and audio. Instead of dropping audio by resetting the AO, try to make it seamless by not sending data after the loop point, and after the seek send new data without a reset.
2016-08-18 18:40:23 +00:00
mpctx->ab_loop_clip = mpctx->playback_pts < opts->ab_loop[1];
player: add some debug output for seeking
2015-06-18 20:31:55 +00:00
MP_VERBOSE(mpctx, "playback restart complete\n");
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
}
}
player: remove old timeline/ordered chapters support
2016-02-15 20:03:51 +00:00
static void handle_eof(struct MPContext *mpctx)
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
{
/* Don't quit while paused and we're displaying the last video frame. On the
* other hand, if we don't have a video frame, then the user probably seeked
* outside of the video, and we do want to quit. */
bool prevent_eof =
mpctx->paused && mpctx->video_out && vo_has_frame(mpctx->video_out);
/* It's possible for the user to simultaneously switch both audio
* and video streams to "disabled" at runtime. Handle this by waiting
* rather than immediately stopping playback due to EOF.
*/
player: refactor: eliminate MPContext.d_audio
2016-01-21 21:24:20 +00:00
if ((mpctx->ao_chain || mpctx->vo_chain) && !prevent_eof &&
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
mpctx->audio_status == STATUS_EOF &&
player: remove old timeline/ordered chapters support
2016-02-15 20:03:51 +00:00
mpctx->video_status == STATUS_EOF &&
!mpctx->stop_play)
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
{
player: remove old timeline/ordered chapters support
2016-02-15 20:03:51 +00:00
mpctx->stop_play = AT_END_OF_FILE;
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
}
}
player: add complex filter graph support See --lavfi-complex option. This is still quite rough. There's no support for dynamic configuration of any kind. There are probably corner cases where playback might freeze or burn 100% CPU (due to dataflow problems when interaction with libavfilter). Future possible plans might include: - freely switch tracks by providing some sort of default track graph label - automatically enabling audio visualization - automatically mix audio or stack video when multiple tracks are selected at once (similar to how multiple sub tracks can be selected)
2016-02-05 22:19:56 +00:00
static void handle_complex_filter_decoders(struct MPContext *mpctx)
{
if (!mpctx->lavfi)
return;
for (int n = 0; n < mpctx->num_tracks; n++) {
struct track *track = mpctx->tracks[n];
if (!track->selected)
continue;
if (!track->sink || !lavfi_needs_input(track->sink))
continue;
if (track->d_audio) {
audio_work(track->d_audio);
struct mp_audio *fr;
int res = audio_get_frame(track->d_audio, &fr);
if (res == DATA_OK) {
lavfi_send_frame_a(track->sink, fr);
} else {
lavfi_send_status(track->sink, res);
}
}
if (track->d_video) {
video_work(track->d_video);
struct mp_image *fr;
int res = video_get_frame(track->d_video, &fr);
if (res == DATA_OK) {
lavfi_send_frame_v(track->sink, fr);
} else {
lavfi_send_status(track->sink, res);
}
}
}
}
player: move more code out of central playloop function ...into its own functions. The central playloop function is still too big, but looks much cleaner now. No changes in functionality. The code moved to handle_playback_restart() is unindented by 1 level and moving it out of the if condition around. The if condition is inverted and early-exits from the function. Also some comments are changed.
2015-01-29 11:37:10 +00:00
void run_playloop(struct MPContext *mpctx)
{
configure: uniform the defines to #define HAVE_xxx (0|1) The configure followed 5 different convetions of defines because the next guy always wanted to introduce a new better way to uniform it[1]. For an hypothetic feature 'hurr' you could have had: * #define HAVE_HURR 1 / #undef HAVE_DURR * #define HAVE_HURR / #undef HAVE_DURR * #define CONFIG_HURR 1 / #undef CONFIG_DURR * #define HAVE_HURR 1 / #define HAVE_DURR 0 * #define CONFIG_HURR 1 / #define CONFIG_DURR 0 All is now uniform and uses: * #define HAVE_HURR 1 * #define HAVE_DURR 0 We like definining to 0 as opposed to `undef` bcause it can help spot typos and is very helpful when doing big reorganizations in the code. [1]: http://xkcd.com/927/ related
2013-07-16 11:28:28 +00:00
#if HAVE_ENCODING
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
if (encode_lavc_didfail(mpctx->encode_lavc_ctx)) {
mpctx->stop_play = PT_QUIT;
return;
}
#endif
demux: add a demuxer thread This adds a thread to the demuxer which reads packets asynchronously. It will do so until a configurable minimum packet queue size is reached. (See options.rst additions.) For now, the thread is disabled by default. There are some corner cases that have to be fixed, such as fixing cache behavior with webradios. Note that most interaction with the demuxer is still blocking, so if e.g. network dies, the player will still freeze. But this change will make it possible to remove most causes for freezing. Most of the new code in demux.c actually consists of weird caches to compensate for thread-safety issues (with the previously single-threaded design), or to avoid blocking by having to wait on the demuxer thread. Most of the changes in the player are due to the fact that we must not access the source stream directly. the demuxer thread already accesses it, and the stream stuff is not thread-safe. For timeline stuff (like ordered chapters), we enable the thread for the current segment only. We also clear its packet queue on seek, so that the remaining (unconsumed) readahead buffer doesn't waste memory. Keep in mind that insane subtitles (such as ASS typesetting muxed into mkv files) will practically disable the readahead, because the total queue size is considered when checking whether the minimum queue size was reached.
2014-07-16 20:40:21 +00:00
update_demuxer_properties(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: add complex filter graph support See --lavfi-complex option. This is still quite rough. There's no support for dynamic configuration of any kind. There are probably corner cases where playback might freeze or burn 100% CPU (due to dataflow problems when interaction with libavfilter). Future possible plans might include: - freely switch tracks by providing some sort of default track graph label - automatically enabling audio visualization - automatically mix audio or stack video when multiple tracks are selected at once (similar to how multiple sub tracks can be selected)
2016-02-05 22:19:56 +00:00
handle_complex_filter_decoders(mpctx);
player: move video display code out of the playloop Basically move the code from playloop.c to video.c. The new function write_video() now contains the code that was part of run_playloop(). There are no functional changes, except handling "new_frame_shown" slightly differently. This is done so that we don't need new a new MPContext field or a return value for write_video() to signal this condition. Instead, it's handled indirectly.
2014-07-30 21:24:08 +00:00
handle_cursor_autohide(mpctx);
command: make window-scale property observable Add a generic mechanism to the VO to relay "extra" events from VO to player. Use it to notify the core of window resizes, which in turn will be used to mark all affected properties ("window-scale" in this case) as changed. (I refrained from hacking this as internal command into input_ctx, or to poll the state change, etc. - but in the end, maybe it would be best to actually pass the client API context directly to the places where events can happen.)
2014-11-02 19:26:51 +00:00
handle_vo_events(mpctx);
player: move video display code out of the playloop Basically move the code from playloop.c to video.c. The new function write_video() now contains the code that was part of run_playloop(). There are no functional changes, except handling "new_frame_shown" slightly differently. This is done so that we don't need new a new MPContext field or a return value for write_video() to signal this condition. Instead, it's handled indirectly.
2014-07-30 21:24:08 +00:00
handle_heartbeat_cmd(mpctx);
player: fix audio-device-list updates The way the AO wakes up the playloop has nothing to do with events; instead we must query the events on the AO once the playloop was woken up. Querying the events in every playloop iteration is thus the correct way to do this.
2015-02-14 14:13:58 +00:00
handle_command_updates(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: add complex filter graph support See --lavfi-complex option. This is still quite rough. There's no support for dynamic configuration of any kind. There are probably corner cases where playback might freeze or burn 100% CPU (due to dataflow problems when interaction with libavfilter). Future possible plans might include: - freely switch tracks by providing some sort of default track graph label - automatically enabling audio visualization - automatically mix audio or stack video when multiple tracks are selected at once (similar to how multiple sub tracks can be selected)
2016-02-05 22:19:56 +00:00
if (mpctx->lavfi) {
if (lavfi_process(mpctx->lavfi))
mpctx->sleeptime = 0;
if (lavfi_has_failed(mpctx->lavfi))
mpctx->stop_play = AT_END_OF_FILE;
}
player: restore usual seeking behavior Commit 786f37ae accidentally changed seeking behavior such that continuous seeking (holding the seek button down) would use the previous seek target timestamp, instead of the new video timestamp. (This is for the default mode, seeking to keyframes.) The result is that the movement on the seekbar is smooth, but the way the video updates is awkward. Some might actually prefer the new behavior (and some players effectively show similar bahavior), but I don't. So restore the old behavior. This is done in two steps: First: strictly wait for the entire seek process to finish, which will effectively make the seeking code pick up the new video timestamp correctly. This would play audio immediately, which would result in noise during continuous seeking, which leads to second: explicitly abort the playback restarting process if this case is detected, and never play audio.
2016-05-09 20:54:49 +00:00
fill_audio_out_buffers(mpctx);
write_video(mpctx);
player: minor simplification No need to pass endpts down in such a dumb way. Also remove an outdated comment somewhere.
2016-02-27 19:02:51 +00:00
handle_playback_restart(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: restore usual seeking behavior Commit 786f37ae accidentally changed seeking behavior such that continuous seeking (holding the seek button down) would use the previous seek target timestamp, instead of the new video timestamp. (This is for the default mode, seeking to keyframes.) The result is that the movement on the seekbar is smooth, but the way the video updates is awkward. Some might actually prefer the new behavior (and some players effectively show similar bahavior), but I don't. So restore the old behavior. This is done in two steps: First: strictly wait for the entire seek process to finish, which will effectively make the seeking code pick up the new video timestamp correctly. This would play audio immediately, which would result in noise during continuous seeking, which leads to second: explicitly abort the playback restarting process if this case is detected, and never play audio.
2016-05-09 20:54:49 +00:00
handle_playback_time(mpctx);
player: some further playloop cleanups Handle --term-playing-msg at a better place. Move MPV_EVENT_TICK hack into a separate function. Also add some words to the client API that you shouldn't use it. (But better leave breaking it for later.) Handle --frames and frame_step differently. Remove the mess from the playloop, and do it after frame display. Give up on the weird semantics for audio-only mode (they didn't make sense anyway), and adjust the manpage accordingly.
2014-08-03 18:25:03 +00:00
handle_dummy_ticks(mpctx);
audio: change playback restart and resyncing This commit makes audio decoding non-blocking. If e.g. the network is too slow the playloop will just go to sleep, instead of blocking until enough data is available. For video, this was already done with commit 7083f88c. For audio, it's unfortunately much more complicated, because the audio decoder was used in a blocking manner. Large changes are required to get around this. The whole playback restart mechanism must be turned into a statemachine, especially since it has close interactions with video restart. Lots of video code is thus also changed. (For the record, I don't think switching this code to threads would make this conceptually easier: the code would still have to deal with external input while blocked, so these in-between states do get visible [and thus need to be handled] anyway. On the other hand, it certainly should be possible to modularize this code a bit better.) This will probably cause a bunch of regressions.
2014-07-28 18:40:43 +00:00
update_osd_msg(mpctx);
sub: change how subtitles are read Slightly change how it is decided when a new packet should be read. Switch to demux_read_packet_async(), and let the player "wait properly" until required subtitle packets arrive, instead of blocking everything. Move distinguishing the cases of passive and active reading into the demuxer, where it belongs.
2015-12-29 00:35:52 +00:00
if (!mpctx->video_out)
update_subtitles(mpctx, mpctx->playback_pts);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: remove old timeline/ordered chapters support
2016-02-15 20:03:51 +00:00
handle_eof(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: --loop-file takes precedence before --keep-open
2014-09-23 23:31:45 +00:00
handle_loop_file(mpctx);
player: fix time display wheen seeking past EOF with --keep-open Regression since commit 261506e3. Internally speaking, playback was often not properly terminated, and the main part of handle_keep_open() was just executed once, instead of any time the user tries to seek. This means playback_pts was not set, and the "current time" was determined by the seek target PTS. So fix this aspect of video EOF handling, and also remove the now unnecessary eof_reached field. The pause check before calling pause_player() is a lazy workaround for a strange event feedback loop that happens on EOF with --keep-open.
2014-07-29 22:22:25 +00:00
handle_keep_open(mpctx);
player: some further playloop cleanups Handle --term-playing-msg at a better place. Move MPV_EVENT_TICK hack into a separate function. Also add some words to the client API that you shouldn't use it. (But better leave breaking it for later.) Handle --frames and frame_step differently. Remove the mess from the playloop, and do it after frame display. Give up on the weird semantics for audio-only mode (they didn't make sense anyway), and adjust the manpage accordingly.
2014-08-03 18:25:03 +00:00
handle_sstep(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: loop on end of file if ab-loop-b is unset Possibly slightly more useful/intuitive.
2016-04-18 19:32:58 +00:00
if (mpctx->stop_play == AT_END_OF_FILE && mpctx->seek.type)
mpctx->stop_play = KEEP_PLAYING;
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
if (mpctx->stop_play)
player: make quit exit immediately Stopping playback canceled waiting, but executed the remainder of the playloop, including things like executing pointless seeks.
2014-08-03 17:14:30 +00:00
return;
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
player: allow redrawing screen during seeks If seeks take very long, it's better not to freeze up the display. (This doesn't handle the case when decoding video frames is extremely slow; just if hr-seek is used, or the demuxer is threaded and blocks on network I/O.)
2014-08-03 17:09:22 +00:00
handle_osd_redraw(mpctx);
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
player: minor refactoring Expose the central event handling functions explicitly, so that other parts of the player can use them. No functional changes. Preparation for the next commit.
2014-09-06 14:57:46 +00:00
mp_wait_events(mpctx, mpctx->sleeptime);
player: raise maximum idle time No reason to wake up every other minute.
2015-08-07 00:41:02 +00:00
mpctx->sleeptime = 1e9; // infinite for all practical purposes
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
handle_pause_on_low_cache(mpctx);
player: minor refactoring Expose the central event handling functions explicitly, so that other parts of the player can use them. No functional changes. Preparation for the next commit.
2014-09-06 14:57:46 +00:00
mp_process_input(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
client API: add chapter change event Also works for mpv_observe_property() on the "chapter" property.
2014-04-27 20:28:07 +00:00
handle_chapter_change(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
handle_force_window(mpctx, false);
execute_queued_seek(mpctx);
}
player: open stream and demuxer asynchronously Run opening the stream and opening the demuxer in a separate thread. This should remove the last code paths in which the player can normally get blocked on network. When the stream is opened, the player will still react to input and so on. Commands to abort opening can also be handled properly, instead of using some of the old hacks in input.c. The only thing the user can really do is aborting loading by navigating the playlist or quitting. Whether playback abort works depends on the stream implementation; with normal network, this will depend on what libavformat (via "interrupt" callback) does. Some pain is caused by DVD/BD/DVB. These want to reload the demuxer sometimes. DVB wants it in order to discard old, inactive streams. DVD/BD for the same reason, and also for reloading stream languages and similar metadata. This means the stream and the demuxer have to be loaded separately. One minor detail is that we now need to copy all global options. This wasn't really needed before, because the options were accessed on opening only, but since opening is now on a separate thread, this obviously becomes a necessity.
2014-10-06 19:20:38 +00:00
void mp_idle(struct MPContext *mpctx)
{
handle_dummy_ticks(mpctx);
mp_wait_events(mpctx, mpctx->sleeptime);
mpctx->sleeptime = 100.0;
mp_process_input(mpctx);
player: handle hotplug events in idle mode too
2015-05-02 15:53:25 +00:00
handle_command_updates(mpctx);
player: don't mess up cursor visibility state Manually setting can break things forever, because it puts the VO cursor state out of sync with the remembered state by handle_cursor_autohide(). Use the normal autohide code during idle mode too instead. (Originally the idea was to make the cursor always visible in idle mode, but not so important.) Regression since e1e8b07c. Fixes #1166. CC: @mpv-player/stable
2014-10-10 16:51:44 +00:00
handle_cursor_autohide(mpctx);
command: make window-scale property observable Add a generic mechanism to the VO to relay "extra" events from VO to player. Use it to notify the core of window resizes, which in turn will be used to mark all affected properties ("window-scale" in this case) as changed. (I refrained from hacking this as internal command into input_ctx, or to poll the state change, etc. - but in the end, maybe it would be best to actually pass the client API context directly to the places where events can happen.)
2014-11-02 19:26:51 +00:00
handle_vo_events(mpctx);
player: open stream and demuxer asynchronously Run opening the stream and opening the demuxer in a separate thread. This should remove the last code paths in which the player can normally get blocked on network. When the stream is opened, the player will still react to input and so on. Commands to abort opening can also be handled properly, instead of using some of the old hacks in input.c. The only thing the user can really do is aborting loading by navigating the playlist or quitting. Whether playback abort works depends on the stream implementation; with normal network, this will depend on what libavformat (via "interrupt" callback) does. Some pain is caused by DVD/BD/DVB. These want to reload the demuxer sometimes. DVB wants it in order to discard old, inactive streams. DVD/BD for the same reason, and also for reloading stream languages and similar metadata. This means the stream and the demuxer have to be loaded separately. One minor detail is that we now need to copy all global options. This wasn't really needed before, because the options were accessed on opening only, but since opening is now on a separate thread, this obviously becomes a necessity.
2014-10-06 19:20:38 +00:00
update_osd_msg(mpctx);
handle_osd_redraw(mpctx);
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
// Waiting for the slave master to send us a new file to play.
void idle_loop(struct MPContext *mpctx)
{
// ================= idle loop (STOP state) =========================
bool need_reinit = true;
while (mpctx->opts->player_idle_mode && !mpctx->playlist->current
&& mpctx->stop_play != PT_QUIT)
{
client API: don't send MPV_EVENT_IDLE when not entering idle mode For simplicity, this was sent before actually checking the idle condition, which meant that we'd send it even of the idle loop is never entered.
2014-02-26 19:45:24 +00:00
if (need_reinit) {
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
uninit_audio_out(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
handle_force_window(mpctx, true);
player: fix idle mode event handling Idle mode went to sleep too early, e.g. just pressing "ESC" did nothing, until the next event happened. This was because it directly went to sleep after processing commands. What we should do instead is rechecking all state after processing commands, redraw OSD, and then go to sleep. This also fixes some strange OSD-related behavior. Also move some other code around to separate idle mode initialization from the normal run loop.
2014-09-12 23:13:36 +00:00
mpctx->sleeptime = 0;
player: deliver IDLE event after uninitializing state A client API user might count on the fact that audio and video outputs have already been uninitialized. (They remain uninitialized before entering idle mode in order to allow smooth transition to the next playlist entry.) Since event delivery is asynchronous, this has to happen after actually doing the uninitialization, or the client will essentially run into a race condition.
2015-08-20 13:25:32 +00:00
mp_notify(mpctx, MPV_EVENT_IDLE, NULL);
player: fix idle mode event handling Idle mode went to sleep too early, e.g. just pressing "ESC" did nothing, until the next event happened. This was because it directly went to sleep after processing commands. What we should do instead is rechecking all state after processing commands, redraw OSD, and then go to sleep. This also fixes some strange OSD-related behavior. Also move some other code around to separate idle mode initialization from the normal run loop.
2014-09-12 23:13:36 +00:00
need_reinit = false;
client API: don't send MPV_EVENT_IDLE when not entering idle mode For simplicity, this was sent before actually checking the idle condition, which meant that we'd send it even of the idle loop is never entered.
2014-02-26 19:45:24 +00:00
}
player: open stream and demuxer asynchronously Run opening the stream and opening the demuxer in a separate thread. This should remove the last code paths in which the player can normally get blocked on network. When the stream is opened, the player will still react to input and so on. Commands to abort opening can also be handled properly, instead of using some of the old hacks in input.c. The only thing the user can really do is aborting loading by navigating the playlist or quitting. Whether playback abort works depends on the stream implementation; with normal network, this will depend on what libavformat (via "interrupt" callback) does. Some pain is caused by DVD/BD/DVB. These want to reload the demuxer sometimes. DVB wants it in order to discard old, inactive streams. DVD/BD for the same reason, and also for reloading stream languages and similar metadata. This means the stream and the demuxer have to be loaded separately. One minor detail is that we now need to copy all global options. This wasn't really needed before, because the options were accessed on opening only, but since opening is now on a separate thread, this obviously becomes a necessity.
2014-10-06 19:20:38 +00:00
mp_idle(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
Reference in New Issue Copy Permalink