This change is required to support TCP/HTTP rules in defaults sections. The
'disabled' bitfield in the proxy structure, used to know if a proxy is
disabled or stopped, is replaced a generic bitfield named 'flags'.
PR_DISABLED and PR_STOPPED flags are renamed to PR_FL_DISABLED and
PR_FL_STOPPED respectively. In addition, everywhere there is a test to know
if a proxy is disabled or stopped, there is now a bitwise AND operation on
PR_FL_DISABLED and/or PR_FL_STOPPED flags.
.disabled field in the proxy structure is documented to be a bitfield. So
use it as a bitfield. This change was introduced to the 2.5, by commit
8e765b86f ("MINOR: proxy: disabled takes a stopping and a disabled state").
No backport is needed except if the above commit is backported.
The test on the return value of fix_tag_value() function was inverted. To
wait for more data, the return value must be a valid empty string and not
IST_NULL.
This patch must be backported to 2.4.
http-after-response rules evaluation must be stopped after a "allow". It
means the frontend ruleset must not be evaluated if a "allow" was performed
in the backend ruleset. Internally, the evaluation must be stopped if on
HTTP_RULE_RES_STOP return value. Only the "allow" action is concerned by
this change.
Thanks to this patch, http-response and http-after-response behave in the
same way.
This patch should be backported as far as 2.2.
This is the same as for commit 468c000db ("BUG/MEDIUM: jwt: fix base64
decoding error detection"), but for function sample_conv_jwt_member_query()
that is used by sample converters jwt_header_query() and jwt_payload_query().
Thanks to Tim for the report. No backport is needed.
As Tim reported in github issue #1414, we ought to use a constant-time
memcmp() when comparing hashes to avoid time-based attacks. Let's use
CRYPTO_memcmp() since this code already depends on openssl.
No backport is needed, this was just merged into 2.5.
Tim reported that a decoding error from the base64 function wouldn't
be matched in case of bad input, and could possibly cause trouble
with -1 being passed in decoded_sig->data. In the case of HMAC+SHA
it is harmless as the comparison is made using memcmp() after checking
for length equality, but in the case of RSA/ECDSA this result is passed
as a size_t to EVP_DigetVerifyFinal() and may depend on the lib's mood.
The fix simply consists in checking the intermediary result before
storing it.
That's precisely what happens with one of the regtests which returned
0 instead of 4 on the intentionally defective token, so the regtest
was fixed as well.
No backport is needed as this is new in this release.
A bug was introduced by commit previous bf9498a31 ("MINOR: resolvers:
fix the resolv_str_to_dn_label() API about trailing zero") as the code
is particularly contrived and hard to test. The output writes the last
char at [i+1] so the trailing zero and return value must be at i+1.
This will have to be backported where the patch above is backported
since it was needed for a fix.
These two fields are exclusive as they depend on the data type.
Let's move them into a union to save some precious bytes. This
reduces the struct resolv_answer_item size from 600 to 576 bytes.
The struct resolv_answer_item contains an address field of type
"sockaddr" which is only 16 bytes long, but which is used to store
either IPv4 or IPv6. Fortunately, the contents only overlap with
the "target" field that follows it and that is large enough to
absorb the extra bytes needed to store AAAA records. But this is
dangerous as just moving fields around could result in memory
corruption.
The fix uses a union and removes the casts that were used to hide
the problem.
Older versions need to be checked and possibly fixed. This needs
to be backported anyway.
In multi-threaded mode, on operating systems supporting multiple listeners on
the same IP:port, this will automatically create this number of multiple
identical listeners for the same line, all bound to a fair share of the number
of the threads attached to this listener. This can sometimes be useful when
using very large thread counts where the in-kernel locking on a single socket
starts to cause a significant overhead. In this case the incoming traffic is
distributed over multiple sockets and the contention is reduced. Note that
doing this can easily increase the CPU usage by making more threads work a
little bit.
If the number of shards is higher than the number of available threads, it
will automatically be trimmed to the number of threads. A special value
"by-thread" will automatically assign one shard per thread.
This function's purpose will be to duplicate a listener in INIT state.
This will be used to ease declaration of listeners spanning multiple
groups, which will thus require multiple FDs hence multiple receivers.
With groups at some point we'll have to have distinct masks/groups in the
receiver and the bind_conf, because a single bind_conf might require to
instantiate multiple receivers (one per group).
Let's split the thread mask and group to have one for the bind_conf and
another one for the receiver while it remains easy to do. This will later
allow to use different storage for the bind_conf if needed (e.g. support
multiple groups).
This function suffers from the same API issue as its sibling that does the
opposite direction, it demands that the input string is zero-terminated
*and* that its length *including* the trailing zero is passed on input,
forcing callers to pass length + 1, and itself to use that length - 1
everywhere internally.
This patch addressess this. There is a single caller, which is the
location of the previous bug, so it should probably be backported at
least to keep the code consistent across versions. Note that the
function is called dns_dn_label_to_str() in 2.3 and earlier.
An off-by-one issue in buffer size calculation used to limit the output
of resolv_dn_label_to_str() to 254 instead of 255.
This must be backported to 2.0.
In issue #1411, @jjiang-stripe reports that do-resolve() sometimes seems
to be trying to resolve crap from random memory contents.
The issue is that action_prepare_for_resolution() tries to measure the
input string by itself using strlen(), while resolv_action_do_resolve()
directly passes it a pointer to the sample, omitting the known length.
Thus of course any other header present after the host in memory are
appended to the host value. It could theoretically crash if really
unlucky, with a buffer that does not contain any zero including in the
index at the end, and if the HTX buffer ends on an allocation boundary.
In practice it should be too low a probability to have ever been observed.
This patch modifies the action_prepare_for_resolution() function to take
the string length on with the host name on input and pass that down the
chain. This should be backported to 2.0 along with commit "MINOR:
resolvers: fix the resolv_str_to_dn_label() API about trailing zero".
This function is bogus at the API level: it demands that the input string
is zero-terminated *and* that its length *including* the trailing zero is
passed on input. While that already looks smelly, the trailing zero is
copied as-is, and is then explicitly replaced with a zero... Not only
all callers have to pass hostname_len+1 everywhere to work around this
absurdity, but this requirement causes a bug in the do-resolve() action
that passes random string lengths on input, and that will be fixed on a
subsequent patch.
Let's fix this API issue for now.
This patch will have to be backported, and in versions 2.3 and older,
the function is in dns.c and is called dns_str_to_dn_label().
Some protocols fail with "error blah [ip:port]" and other fail with
"[ip:port] error blah". All this already appears in a "starting" or
"binding" context after a proxy name. Let's choose a more universal
approach like below where the ip:port remains at the end of the line
prefixed with "for".
[WARNING] (18632) : Binding [binderr.cfg:10] for proxy http: cannot bind receiver to device 'eth2' (No such device) for [0.0.0.0:1080]
[WARNING] (18632) : Starting [binderr.cfg:10] for proxy http: cannot set MSS to 12 for [0.0.0.0:1080]
Binding errors and late socket errors provide no information about
the file and line where the problem occurs. These are all done by
protocol_bind_all() and they only report "Starting proxy blah". Let's
change this a little bit so that:
- the file name and line number of the faulty bind line is alwas mentioned
- early binding errors are indicated with "Binding" instead of "Starting".
Now we can for example have this:
[WARNING] (18580) : Binding [binderr.cfg:10] for proxy http: cannot bind receiver to device 'eth2' (No such device) [0.0.0.0:1080]
The MSS errors are the only ones not indicating what was attempted, let's
report the value that was tried, as it can help users spot them in the
config (particularly if a default value was used).
Right now only the last warning or error is reported from
tcp_bind_listener(), but it is useful to report all warnings and no only
the last one, so we now emit them delimited by commas. Previously we used
a fixed buffer of 100 bytes, which was too small to store more than one
message, so let's extend it.
Signed-off-by: Bjoern Jacke <bjacke@samba.org>
In file included from include/haproxy/jwt.h:25:
include/haproxy/jwt-t.h:66:2: error: unknown type name 'EVP_PKEY'
EVP_PKEY *pkey;
^
1 error generated.
Fix this compilation issue by inserting openssl-compat.h in jwt-t.h
This new converter takes a JSON Web Token, an algorithm (among the ones
specified for JWS tokens in RFC 7518) and a public key or a secret, and
it returns a verdict about the signature contained in the token. It does
not simply return a boolean because some specific error cases cas be
specified by returning an integer instead, such as unmanaged algorithms
or invalid tokens. This enables to distinguich malformed tokens from
tampered ones, that would be valid format-wise but would have a bad
signature.
This converter does not perform a full JWT validation as decribed in
section 7.2 of RFC 7519. For instance it does not ensure that the header
and payload parts of the token are completely valid JSON objects because
it would need a complete JSON parser. It only focuses on the signature
and checks that it matches the token's contents.
Those converters allow to extract a JSON value out of a JSON Web Token's
header part or payload part (the two first dot-separated base64url
encoded parts of a JWS in the Compact Serialization format).
They act as a json_query call on the corresponding decoded subpart when
given parameters, and they return the decoded JSON subpart when no
parameter is given.
A JWT signed with the RSXXX or ESXXX algorithm (RSA or ECDSA) requires a
public certificate to be verified and to ensure it is valid. Those
certificates must not be read on disk at runtime so we need a caching
mechanism into which those certificates will be loaded during init.
This is done through a dedicated ebtree that is filled during
configuration parsing. The path to the public certificates will need to
be explicitely mentioned in the configuration so that certificates can
be loaded as early as possible.
This tree is different from the ckch one because ckch entries are much
bigger than the public certificates used in JWT validation process.
This helper function splits a JWT under Compact Serialization format
(dot-separated base64-url encoded strings) into its different sub
strings. Since we do not want to manage more than JWS for now, which can
only have at most three subparts, any JWT that has strictly more than
two dots is considered invalid.
The full list of possible algorithms used to create a JWS signature is
defined in section 3.1 of RFC7518. This patch adds a helper function
that converts the "alg" strings into an enum member.
This fetch can be used to retrieve the data contained in an HTTP
Authorization header when the Bearer scheme is used. This is used when
transmitting JSON Web Tokens for instance.
On receiving CONNECTION_CLOSE frame, the mux is flagged for immediate
connection close. A stream is closed even if there is data not ACKed
left if CONNECTION_CLOSE has been received.
The mux tx buffers have been rewritten with buffers attached to qcs
instances. qc_buf_available and qc_get_buf functions are updated to
manipulates qcs. All occurences of the unused qcc ring buffer are
removed to ease the code maintenance.
Defer the shutting of a qcs if there is still data in its tx buffers. In
this case, the conn_stream is closed but the qcs is kept with a new flag
QC_SF_DETACH.
On ACK reception, the xprt wake up the shut_tl tasklet if the stream is
flagged with QC_SF_DETACH. This tasklet is responsible to free the qcs
and possibly the qcc when all bidirectional streams are removed.
For the moment, a quic connection is considered dead if it has no
bidirectional streams left on it. This test is implemented via
qcc_is_dead function. It can be reused to properly close the connection
when needed.
Properly handle tx buffers management in h3 data sending. If there is
not enough contiguous space, the buffer is first realigned. If this is
not enough, the stream is flagged with QC_SF_BLK_MROOM waiting for the
buffer to be emptied.
If a frame on a stream is successfully pushed for sending, the stream is
called if it was flagged with QC_SF_BLK_MROOM.
Remove the tx mux ring buffers in qcs, which should be in the qcc. For
the moment, use a simple architecture with 2 simple tx buffers in the
qcs.
The first buffer is used by the h3 layer to prepare the data. The mux
send operation transfer these into the 2nd buffer named xprt_buf. This
buffer is only freed when an ACK has been received.
This architecture is functional but not optimal for two reasons :
- it won't limit the buffer usage by connection
- each transfer on a new stream requires an allocation
In order for the test to run with OpenSSL 1.0.2 the test will now mostly
use TLSv1.2 and use TLS 1.3 only on some specific tests (covered by
preconditions).
The test is strongly dependent on the way the errors are output by the
SSL library so it is not possible to perform the same checks when using
OpenSSL or LibreSSL. It is then reenabled for OpenSSL (whatever the
version) but still disabled for LibreSSL.
This limitation is added thanks to the new ssllib_name_startswith
precondition check.
The OpenSSL error codes for the same errors are not consistent between
OpenSSL versions. The ssl_errors test needs to be modified to only take
into account a fixed part of those error codes.
This patch focuses on the reason part of the error code by applying a
mask on the error code (whose size varies depending on the lib version).
This new ssllib_name_startswith precondition check can be used to
distinguish application linked with OpenSSL from the ones linked with
other SSL libraries (LibreSSL or BoringSSL namely). This check takes a
string as input and returns 1 when the SSL library's name starts with
the given string. It is based on the OpenSSL_version function which
returns the same output as the "openssl version" command.
The log-error-via-logformat option was removed in commit
3d6350e108 and was replaced by a dedicated
error-log-format option. The references to this option need to be
removed from the test's description.
Set an `lua_atpanic()` handler before calling `hlua_prepend_path()` in
`hlua_config_prepend_path()`.
This prevents the process from abort()ing when `hlua_prepend_path()` fails
for some reason.
see GitHub Issue #1409
This is a very minor issue that can't happen in practice. No backport needed.
This line is not related to the response channel but to the stream. Thus it
must be indented at the same level as stream-interfaces, connections,
channels...
