This includes the case of switching ordered chapter boundaries. It will
now be recreated on each timeline part switch. This shouldn't be much of
a problem with modern libass. (Older libass versions use fontconfig for
memory fonts, and will be very slow to reinitialize memory fonts.)
Since commit 6d9cb893, subtitle state doesn't survive timeline switches
(ordered chapters etc.). So there is no point in caching the state per
sh_stream anymore (which would be required to deal with multiple
segments). Move the cache to struct track.
(Whether it's worth caching the subtitle state just for the situation
when subtitle tracks get reselected is questionable. But for now, it's
nice to have the subtitles immediately show up when reselecting a
subtitle.)
Instead of periodically trying to enable it again. There are two cases
that can happen:
1. A random discontinuity messed everything up,
2. Things are just broken and will desync all the time
Until now, it tried to deal with case 1 - but maybe this is really rare,
and we don't really need to care about it. On the other hand, case 2 is
kind of hard to diagnose if the user doesn't use the terminal.
Seeking will reenable display-sync, so you can fix playback if case 1
happens, but still get predictable behavior in case 2.
This was used with --no-sub-ass (aka --no-ass). This option (which is
not yet removed) strips all styling from the subtitles, and renders them
as plaintext only. For some reason, it originally seemed convenient to
reuse all the OSD text rendering code (osd_libass.c). While this was
indeed simple, it had a bad influence on the rest of the code. For
example, it had to decide whether to go through the OSD code path, or
the proper subtitle renderer in sd_ass.c.
Kill the OSD subtitle renderer. Reimplement --no-sub-ass and also
"secondary" subtitles in sd_ass.c. fill_plaintext() contains some rather
minor code duplication with osd_libass.c for setting up a dummy
ASS_Event and escaping the stripped text. Since sd_ass.c already has to
handle "normal" text subtitles, and has code for stripping ASS tags,
this remains all relatively simple.
Remove all the unnecessary crap from the rest of the code.
Use the demux_set_ts_offset() added in the previous commit to base each
timeline segment to use timestamps according to its relative position
within the overall timeline. As a consequence we don't need to care
about these timestamps anymore, and everything becomes simpler.
(Another minor but delicious nugget of sanity.)
Most of this is explained in the DOCS additions.
This gives us slightly more sanity, because there is less interaction
between the various parts. The goal is getting rid of the video_offset
entirely.
The simplification extends to the user API. In particular, we don't need
to fix missing parts in the API, such as the lack for a seek command
that seeks relatively to the start time. All these things are now
transparent.
(If someone really wants to know the real timestamps/start time, new
properties would have to be added.)
This adds support for the progress indicator taskbar extension
that was introduced with Windows 7 and Windows Server 2008 R2.
I don’t like this solution because it keeps its own state and
introduces another VOCTRL, but I couldn’t come up with anything
less messy.
closes#2399
We always let audio slowly desync until a threshold is reached, and then
pushed it back by applying a maximum compensation speed. Refine what
comes afterwards: instead of playing with the nominal video speed, use
the actual required audio speed for keeping sync as measured by the A/V
difference. (The "actual" speed is the ideal speed with A/V differences
added.)
Although this works in theory, it's somewhat questionable how much this
works in practice. The ideal time value is actually not exact, but is
the time at which the frame is scheduled (could be compensated by using
the time_left calculations in handle_display_sync_frame()). It doesn't
account for speed changes or catastrophic discontinuities. It uses only
10 past frames.
This is very "illustrative", unlike the video-speed-correction
property, and thus useful. It can also be used to observe scheduling
errors, which are not detected by the core. (These happen due to
rounding errors; possibly not evne our fault, but coming from
files with rounded timestamps and so on.)
Get rid of get_past_frame_durations(), which was a bit too messy. Add
a past_frames array, which contains the same information in a more
reasonable way. This also means that we can get the exact current and
past frame durations without going through awful stuff. (The main
problem is that vo_pts_history contains future frames as well, which is
needed for frame backstepping etc., but gets in the way here.)
Also disable the automatic disabling of display-sync if the frame
duration changes, and extend the frame durations allowed for display
sync. To allow arbitrarily high durations, vo.c needs to be changed
to pause and potentially redraw OSD while showing a single frame, so
they're still limited.
In an attempt to deal with VFR, calculate the overall speed using the
average FPS. The frame scheduling itself does not use the average FPS,
but the duration of the current frame. This does not work too well,
but provides a good base for further improvements.
Where this commit actually helps a lot is dealing with rounded
timestamps, e.g. if the container framerate is wrong or unknown, or
if the muxer wrote incorrectly rounded timestamps. While the rounding
errors apparently can't be get rid of completely in the general case,
this is still much better than e.g. disabling display-sync completely
just because some frame durations go out of bounds.
Discontinuities (like toggling fullscreen) can cause multiple frames to
be dropped in succession, which sounds very weird. It's better to drop
some video frames instead to compensate for larger desyncs.
We roughly base it on the maximum allowed speed changes (audio change is
"additional" to the video change to account for deviations when playing
at max. video speed change).
Sigh... After the recent changes, another regression appeared. This
time, the VO window wasn't cleared when changing from video to a non-
video file (such as audio-only with no cover art). Fix this by properly
taking the handle_force_window() bool parameter into account.
Also, the info message could be printed twice, which is harmless but
ugly. So just remove the message.
Also, do some more minor cleanups (like fixing the comment, which was
completely outdated).
The previous commit was incomplete (and I didn't notice due to a broken
test procedure).
The annoying part is that actually creating the VO was separate; redo
this and merge the code for this into handle_force_window() as well.
This will also make implementing proper reaction to runtime option
changes easier. (Only the part for actually listening to option changes
is missing.)
If this mode is enabled, the player tries to strictly synchronize video
to display refresh. It will adjust playback speed to match the display,
so if you play 23.976 fps video on a 24 Hz screen, playback speed is
increased by approximately 1/1000. Audio wll be resampled to keep up
with playback.
This is different from the default sync mode, which will sync video to
audio, with the consequence that video might skip or repeat a frame once
in a while to make video keep up with audio.
This is still unpolished. There are some major problems as well; in
particular, mkv VFR files won't work well. The reason is that Matroska
is terrible and rounds timestamps to milliseconds. This makes it rather
hard to guess the framerate of a section of video that is playing. We
could probably fix this by just accepting jittery timestamps (instead
of explicitly disabling the sync code in this case), but I'm not ready
to accept such a solution yet.
Another issue is that we are extremely reliant on OS video and audio
APIs working in an expected manner, which of course is not too often
the case. Consequently, the new sync mode is a bit fragile.
For video sync, we want separate playback speed controls for user-
requested speed and the "correction" speed for video timing. Further, we
use this separation to make sure only a resampler is inserted if
playback speed is only changed for video sync correction.
As of this commit, this is basically inactive code. It's just
preparation for the video sync code (the following commit).
Additionally to taking the average, this tries to use the demuxer FPS to
eliminate jitter, and applies some other heuristics to check if the
result is sane.
This code will also be used for the display sync code (it will actually
make use of the require_exact parameter).
(The value of doing this over keeping the simpler demux_mkv hack is
somewhat questionable. But at least it allows us to deal with other
container formats that use jittery timestamps, such as mp4 remuxed
from mkv.)
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
Instead of calling it "future frames" and adding or subtracting 1 from
it, always call it "requested frames". This simplifies it a bit.
MPContext.next_frames had 2 added to it; this was mainly to ensure a
minimum size of 2. Drop it and assume VO_MAX_REQ_FRAMES is at least 2;
together with the other changes, this can be the exact size of the
array.
mp_seek_chapter() had only 1 caller. Also the code was rather
roundabout; the entire function can be compressed to 5 lines of code.
(The new code is functionally the same - "mpctx->last_chapter_seek =
-2;" was effectively a dead assingment.)
Each subtitle track gets its own decoder instance (sd_ass). But they use
a shared ASS_Renderer. This is done mainly because of fontconfig.
Initializing fontconfig is very slow when using it with memory fonts, so
there's a practical need to cache this memory font state, which is done
by not creating separate ASS_Renderers. This is very dirty and very
evil, but we probably can't get rid of it any time soon.
The shared ASS_Renderer was not properly synchronized. While the program
logic guarantees that only one sd_ass instance is visible at a time,
there are other interactions that require synchronization. In
particular, I suspect concurrent execution of mp_ass_configure_fonts()
and sd_ass.get_bitmaps cause issues in a newer libass development
branch.
So here's a shitty hack that hopefully fixes things, hopefully only
until libass becomes less dependent on fontconfig.
The final goal is making opening the demuxer and opening the stream the
same operation.
Stream dumping is a rather uninteresting feature, but has a small
number of vocal users, and it's easy to keep.
Now the VO can request a number of future frames with the last parameter
of vo_set_queue_params(). This will be helpful to fix the interpolation
code.
Note that the first frame (after playback start or seeking) will usually
not have any future frames (to make seeking fast). Near the end of the
file, the number of future frames will become lower as well.
At least Matroska files have a "forced" flag (in addition to the
"default" flag). Export this flag. Treat it almost like the default
flag, but with slightly higher priority.
Adding an external audio track before loading the main file didn't work
right. For one, mp_switch_track() assumes it is called after the main
file is loaded. (The difference is that decoders are only initialized
once the main file is loaded, and we avoid doing this before that for
whatever reason.)
To avoid further messiness, just allow mp_switch_track() to be called at
any time. Also make it do what mp_mark_user_track_selection() did, since
the latter requires current_track to be set. (One could probably simply
allow current_track to be set at this point, but it'd interfere with
default track selection anyway and thus would be pointless.)
Fixes#1984.
mp_find_config_file() will print the filename lookup and its result in
verbose mode. This is wanted, but gets inconvenient when it is done for
every playlist entry (for resuming).
Lookup the watch_later subdir only once and cache the result instead.
This drops the logic for loading the resume file from other locations,
which should generally be unnecessary, though might lead to confusion if
the user has mixed old and new config paths (which the user shouldn't).
Also add a mp_find_user_config_file() function for a more
straightforward and reliable way to get actual local configpaths,
instead of possibly global and unwritable locations.
Also, for symmetry, check the resume option in mp_load_playback_resume()
just like mp_check_playlist_resume() does.
And split the Cocoa and Unix cases. Simplify the Cocoa case slightly by
calling mpv_main directly, instead of passing a function pointer. Also
add a comment explaining why Cocoa needs a special case at all.
Should help with debugging, and might be slightly more userfriendly.
Note that this is called manually in multiple entry-points, instead of
the functions doing the actual work (like mp_remove_track()). This is
done so that exiting the player or calling the sub_reload command won't
print redundant in-between states.
Move the command line parsing and some other things to the common init
routine shared between command line player and client API. This means
they're using almost exactly the same code now.
The main intended side effect is that the client API will load mpv.conf;
though still only if config loading is enabled.
(The cplayer still avoids creating an extra thread, passes a command
line, and prints an exit status to the terminal. It also has some
different defaults.)
Commit f54220d9 attempted to improve this, but it got worse. Now there
was a crash when ytdl_hook.lua added external tracks. This happened
because close_unused_demuxers() assumed that sources[0] was the main
demuxer (so that it didn't close it). This assumption failed, because
the ytdl script can add external tracks before the main file is loaded.
The easy fix would have been to check for master_demuxer, and not i==0.
But instead give up on the old idea, make some stricter assumptions how
demuxers and external tracks map, and simplify the code.
These functions do blocking work on a separate thread, but wait until
they return. So they are not async or non-blocking. But they do react to
user-input and client API accesses, which makes them reentrant.
Instead of accessing MPContext in player/timeline/*, create a separate
context struct, which the timeline loaders fill out. It turns out that
there's not much in the way too big MPContext that these need to access.
One major PITA is managing (and closing) the set of open demuxers. The
problem is that we need a list of all demuxers to make sure no unneeded
streams are enabled.
This adds a callback to the demuxer_desc struct, with the intention of
leaving to to the demuxer to call the right loader, instead of
explicitly checking the demuxer type and dispatching manually in common
code. I also considered making the timeline part of the demuxer state,
but decided against: it's too much of a mess wrt. memory management and
threading, and also doesn't make it clear who owns the child demuxers.
With the struct timeline decoupled from the demuxer state, it's at least
somewhat clear that the child demuxers are independent from the "main"
demuxer.
The actual changes to player/timeline/* are separated in the following
commits, because they're quite verbose. Some artifacts will be removed
later as soon as there's only 1 timeline loading mechanism.
These commands are counterparts of sub_add/sub_remove/sub_reload which
work for external audio file.
Signed-off-by: wm4 <wm4@nowhere>
(minor simplification)
mpctx->audio_delay always has the same value as opts->audio_delay. (This
was not the case a long time ago, when the audio-delay property didn't
actually write to opts->audio_delay. I think.)
This is for the ordered chapters case only. In theory this could have
resulted in initial audio, video or subs missing, although it didn't
happen in practice (because no streams were selected, thus the demuxer
thread didn't actually try to read anything). It's still better to make
this explicit.
Also, timeline_set_part() can be private to loadfile.c.
Most of this is explained in the code comments. This change should
improve performance with vapoursynth, especially if concurrent requests
are used.
This should change nothing if vf_vapoursynth is not in the filter chain,
since non-threaded filters obviously can not asynchronously finish
filtering of frames.
This attempts to increase user-friendliness by excluding useless tags.
It should be especially helpful with mp4 files, because the FFmpeg mp4
demuxer adds tons of completely useless information to the metadata.
Fixes#1403.
Until now, these options took effect only at program start. This could
be confusing when e.g. doing "mpv list.m3u --shuffle". Make them always
take effect when a playlist is loaded either via a playlist file, or
with the "loadlist" command.
The code in the demuxer etc. was changed to update all metadata/tags at
once, instead of changing each metadata field. As a consequence,
printing of the tags to the terminal was also changed to print
everything on each change.
Some users didn't like this. Add a very primitive way to avoid printing
fields with the same value again if metadata is marked as changed. This
is not always correct (could print unchanged fields anyway), but usually
works.
(In general, a rather roundabout way to reflect a changed title with ICY
streaming...)
Fixes#813 (let's call it a "policy change").
This adds API to libmpv that lets host applications use the mpv opengl
renderer. This is a more flexible (and possibly more portable) option to
foreign window embedding (via --wid).
This assumes that methods like context sharing and multithreaded OpenGL
rendering are infeasible, and that a way is needed to integrate it with
an application that uses a single thread to render everything.
Add an example that does this with QtQuick/qml. The example is
relatively lazy, but still shows how relatively simple the integration
is. The FBO indirection could probably be avoided, but would require
more work (and would probably lead to worse QtQuick integration, because
it would have to ignore transformations like rotation).
Because this makes mpv directly use the host application's OpenGL
context, there is no platform specific code involved in mpv, except
for hw decoding interop.
main.qml is derived from some Qt example.
The following things are still missing:
- a way to do better video timing
- expose GL renderer options, allow changing them at runtime
- support for color equalizer controls
- support for screenshots
There were complaints that a chapter seek past the last chapter was
quitting the player. Change the behavior to what is expected: the last
frame.
If no chapters are available, this still does nothing.
It feels strange that seeking past EOF with --keep-open actually leaves
the player at a random position. You can't even unpause, because the
demuxer is in the EOF state, and what you see on screen is just what was
around before the seek.
Improve this by attempting to seek to the last video frame if EOF
happens. We explicitly don't do this if EOF was reached normally to
increase robustness (if the VO got a frame since the last seek, it
obviously means we had normal playback before EOF).
If an error happens when trying to find the last frame (such as not
actually finding a last frame because e.g. the demuxer misbehaves), this
will probably turn your CPU into a heater. There is no logic to prevent
reinitiating the last-frame search if the last-frame search reached EOF.
(Pausing usually prevents that EOF is reached again after a successful
last-frame search.)
Fixes#819.
libass won't use embedded fonts, unless ass_set_fonts() (called by
mp_ass_configure_fonts()) is called. However, we call this function when
the ASS_Renderer is initialized, which is long before the .ass file is
actually loaded. (I'm not sure why it tries to keep 1 ASS_Renderer, but
it always did this.)
Fix by calling mp_ass_configure_fonts() after loading them. This also
means this function will be called multiple times - hopefully this is
harmless (it will reinit fontconfig every time, though).
While we're at it, also initialize the ASS_Renderer lazily.
Fixes#1244.
Instead of defining a separate data structure in the core.
For some odd reason, demux_chapter exported the chapter time in
nano-seconds. Change that to the usual timestamps (rename the field
to make any code relying on this to fail compilation), and also remove
the unused chapter end time.
If you played e.g. an audio-only file and something bad happened that
interrupted playback, the exit message could say "No files played".
This was awkward, so show a different message in this case.
Also overhaul how the exit status is reported in order to make this
easier. This includes things such as not reporting a playback error
when loading playlists (playlists contain no video or audio, which
was considered an error).
Not sure if I'm happy with this, but for now it seems like a slight
improvement.
Use the codepath that is normally used for DVD/BD title switching and
DVB channel switching. Removes some extra artifacts from the client API:
now MPV_EVENT_END_FILE will never be called on reloads (and neither is
MPV_EVENT_START_FILE).
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
The player was supposed to exit playback if both video and audio failed
to initialize (or if one of the streams was not selected when the other
stream failed). This didn't work; for one this check was missing from
one of the failure paths. And more importantly, both checked the
current_track array incorrectly.
Fix these issues, and move the failure handling code into a common
function.
CC: @mpv-player/stable
Apparently using the stream index is the best way to refer to the same
streams across multiple FFmpeg-using programs, even if the stream index
itself is rarely meaningful in any way.
For Matroska, there are some possible problems, depending how FFmpeg
actually adds streams. Normally they seem to match though.
A vague idea to get something similar what libquvi did.
Undocumented because it might change a lot, or even be removed. To give
an idea what it does, a Lua script could do the following:
-- type ID priority
mp.commandv("hook_add", "on_load", 0, 0)
mp.register_script_message("hook_run", function(param, param2)
-- param is "0", the user-chosen ID from the hook_add command
-- param2 is the magic value that has to be passed to finish
-- the hook
mp.resume_all()
-- do something, maybe set options that are reset on end:
mp.set_property("file-local-options/name", "value")
-- or change the URL that's being opened:
local url = mp.get_property("stream-open-filename")
mp.set_property("stream-open-filename", url .. ".png")
-- let the player (or the next script) continue
mp.commandv("hook_ack", param2)
end)
This reverts commit 45c8b97efb.
Some else complained (github issue #1163).
The feature requested in #1148 will be implemented differently in
the following commit.
After @frau's split of macosx_events from macosx_application, `is_cplayer' is
not needed anymore. At the moment only global events such as Media Keys and
Apple Remote work, because the VO-level ones were hardcoded to be disabled.
(that will be fix in a later commit ).
Now any action that stops playback of a file (even playlist navigation)
will save the position. Normal EOF is of course excluded from this, as
well as commands that just reload the current file.
The option name is now slightly off, although you could argue what the
word "quit" means.
Fixes#1148 (or at least this is how I understood it).
Run opening the stream and opening the demuxer in a separate thread.
This should remove the last code paths in which the player can normally
get blocked on network.
When the stream is opened, the player will still react to input and so
on. Commands to abort opening can also be handled properly, instead of
using some of the old hacks in input.c. The only thing the user can
really do is aborting loading by navigating the playlist or quitting.
Whether playback abort works depends on the stream implementation; with
normal network, this will depend on what libavformat (via "interrupt"
callback) does.
Some pain is caused by DVD/BD/DVB. These want to reload the demuxer
sometimes. DVB wants it in order to discard old, inactive streams.
DVD/BD for the same reason, and also for reloading stream languages
and similar metadata. This means the stream and the demuxer have to
be loaded separately.
One minor detail is that we now need to copy all global options. This
wasn't really needed before, because the options were accessed on
opening only, but since opening is now on a separate thread, this
obviously becomes a necessity.
Also recreate ASS_Library on every file played. This means we can move
the code out of main.c as well.
Recreating the ASS_Library object has no disadvantages, because it
literally stores only the message callback, the (per-file) font
attachment as byte arrays, and the set of style overrides. Hopefully
this thing can be removed from the libass API entirely at some point.
The only reason why the player core creates the ASS_Renderer, instead
of the subtitle renderer, is because we want to cache the loaded fonts
across ordered chapter transitions, so this probably still has to stay
around for now.
Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The
main use of this was that you could pass a bitmask of these flags to
uninit_player(). Except in some situations where you wanted to
uninitialize nearly everything, this wasn't really useful. Moreover, it
was quite annoying that subsystems had most of the code in a specific
file, but the uninit code in loadfile.c (because that's where
uninit_player() was implemented).
Simplify all this. Remove the flags; e.g. instead of testing for the
INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code
to separate functions, e.g. uninit_audio_out().
This would play some silence in case video was slower than audio. If
framedropping is already enabled, there's no other way to keep A/V
sync, short of changing audio playback speed (which would give worse
results). The --audiodrop option inserted silence if there was more
than 500ms desync.
This worked somewhat, but I think it was a silly idea after all. Whether
the playback experience is really bad or slightly worse doesn't really
matter. There also was a subtle bug with PTS handling, that apparently
caused A/V desync anyway at ridiculous playback speeds.
Just remove this feature; nobody is going to use it anyway.
Eliminate the remains of the OSD message stack. Another simplification
comes from the fact that we do not need to care about time going
backwards (we always use a monotonic time source, and wrapping time
values are practically impossible). What this code was pretty trivial,
and by now unnecessarily roundabout.
Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into
set_osd_msg_va().
There's no need to update OSD messages and the terminal status if nobody
is going to see it. Since the player doesn't block on video display
anymore, this update happens to often and probably burns slightly more
CPU than necessary. (OSD redrawing is handled separately, so it's just
mostly useless text processing and such.)
Change it so that it's updated only on every video frame or all 50ms
(whatever comes first).
For VO OSD, we could in theory try to lock to the OSD redraw heuristic
or the display refresh rate, but that's more complicated and doesn't
work for the terminal status.
Be less annoying, print the actual OSD level instead of something
meaningless, but still clear the OSD if OSD level 0 (no OSD) is set.
Remove the special handling for terminal OSD, that was just dumb.
Probably not many user-visible changes. One notable change is that the
terminal OSD code for OSD bar fallback handling is removed with no
replacement. Instead, terminal OSD gets the same text message as normal
OSD. For volume, this is ok, because the text message is reasonable.
Other properties will look worse, but could be adjusted, and there are
in fact no other such properties that would be useful in audio-only
mode.
The fallback message for seeking falls away as well, but that message
was useless anyway - the terminal status line provides all information
anyway.
I believe the show_property_osd() code is now much easier to follow.
This mechanism originates from MPlayer's way of dealing with blocking
network, but it's still useful. On opening and closing, mpv waits for
network synchronously, and also some obscure commands and use-cases can
lead to such blocking. In these situations, the stream is asynchronously
forced to stop by "interrupting" it.
The old design interrupting I/O was a bit broken: polling with a
callback, instead of actively interrupting it. Change the direction of
this. There is no callback anymore, and the player calls
mp_cancel_trigger() to force the stream to return.
libavformat (via stream_lavf.c) has the old broken design, and fixing it
would require fixing libavformat, which won't happen so quickly. So we
have to keep that part. But everything above the stream layer is
prepared for a better design, and more sophisticated methods than
mp_cancel_test() could be easily introduced.
There's still one problem: commands are still run in the central
playback loop, which we assume can block on I/O in the worst case.
That's not a problem yet, because we simply mark some commands as being
able to stop playback of the current file ("quit" etc.), so input.c
could abort playback as soon as such a command is queued. But there are
also commands abort playback only conditionally, and the logic for that
is in the playback core and thus "unreachable". For example,
"playlist_next" aborts playback only if there's a next file. We don't
want it to always abort playback.
As a quite ugly hack, abort playback only if at least 2 abort commands
are queued - this pretty much happens only if the core is frozen and
doesn't react to input.
The purpose is making accessing the current playlist entry saner when
commands are executed during initialization, termination, or after
playlist navigation commands.
For example, the "playlist_remove current" command will invalidate
playlist->current - but some things still access the playlist entry even
on uninit. Until now, checking stop_play implicitly took care of it, so
it worked, but it was still messy.
Introduce the mpctx->playing field, which points to the current playlist
entry, even if the entry was removed and/or the playlist's current entry
was moved (e.g. due to playlist navigation).
Expose the central event handling functions explicitly, so that other
parts of the player can use them.
No functional changes. Preparation for the next commit.
Remove the hardcoded wait time of 2 seconds. Instead, adjust the wait
time each time we unpause: if downloading the data took longer than its
estimated playback time, increase the amount of data we wait for. If
it's shorter, decrease it.
The +/- is supposed to avoid oscillating between two values if the
elapsed time and the wait time are similar. It's not sure if this
actually helps with anything, but it can't harm.
This shouldn't change anything functionally.
Change the A/V desync message. --framedrop is enabled by default now, so
the text must be changed a little. I've never heard of audio outputs
messing up A/V sync recently, so remove that part.
Remove the unused ao_pts field.
Reorder 2 A/V sync related expressions so that they look the same.
In theory, timestamps can be negative, so we shouldn't just return -1
as special value.
Remove the separate code for clearing decode buffers; use the same code
that is used for normal seek reset.
Commit 5afc025c broke this. The reason is that mpctx->delay is updated
when a new video frame is added. This value is also needed to resync
audio, but it will be for the wrong PTS. They must be consistent with
each other, and if they aren't, initial sync will be off by N video
frames, which results at least in worse user experience.
This can be reproduced by for example heavily switching between normal
and 2x speed, or similar.
Fix by readding the video_next_pts field (keeping its use minimal,
instead of reverting the commit that removed it).
This simplifies the code, and fixes an odd bug: the second-last frame
was displayed for a very short duration if framedrop was enabled. The
reason was that basically the time difference between second-last and
last frame were skipped, because at this point EOF was already
signaled. Also see commit b0959488 for a similar issue in the
same code.
This removes the messiness of the next_frame 2-frame queue, and
strictly runs the "new frame" code when a frame is moved to the first
position of the queue, instead of somehow messing with return codes.
This also merges update_video() into video_output_image().
print_status() is called at a later point anyway (and before sleeping),
so this code has little effect. This code was added in commit a4f7a3df5,
and I can't observe any problems with idle mode anymore.
Now print_status() is called from a single place only, within osd.c.
Apparently users prefer this behavior.
It was used for subtitles too, so move the code to calculate the video
offset into a separate function. Seeking also needs to be fixed.
Fixes#1018.
The previous commit broke these things, and fixing them is separate in
this commit in order to reduce the volume of changes.
Move the image queue from the VO to the playback core. The image queue
is a remnant of the old way how vdpau was implemented, and increasingly
became more and more an artifact. In the end, it did only one thing:
computing the duration of the current frame. This was done by taking the
PTS difference between the current and the future frame. We keep this,
but by moving it out of the VO, we don't have to special-case format
changes anymore. This simplifies the code a lot.
Since we need the queue to compute the duration only, a queue size
larger than 2 makes no sense, and we can hardcode that.
Also change how the last frame is handled. The last frame is a bit of a
problem, because video timing works by showing one frame after another,
which makes it a special case. Make the VO provide a function to notify
us when the frame is done, instead. The frame duration is used for that.
This is not perfect. For example, changing playback speed during the
last frame doesn't update the end time. Pausing will not stop the clock
that times the last frame. But I don't think this matters for such a
corner case.
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
Achieve this by polling. Will be used by the OSC. Basically a bad hack -
but the point is that the mpv core itself is in the best position to
improve this later.
Basically move the code from playloop.c to video.c. The new function
write_video() now contains the code that was part of run_playloop().
There are no functional changes, except handling "new_frame_shown"
slightly differently. This is done so that we don't need new a new
MPContext field or a return value for write_video() to signal this
condition. Instead, it's handled indirectly.
This also reduces some code duplication with other parts of the code.
The changfe is mostly cosmetic, although there are also some subtle
changes in behavior. At least one change is that the big desync message
is now printed after every seek.
Regression since commit 261506e3. Internally speaking, playback was
often not properly terminated, and the main part of handle_keep_open()
was just executed once, instead of any time the user tries to seek. This
means playback_pts was not set, and the "current time" was determined by
the seek target PTS.
So fix this aspect of video EOF handling, and also remove the now
unnecessary eof_reached field.
The pause check before calling pause_player() is a lazy workaround for
a strange event feedback loop that happens on EOF with --keep-open.
If you for example use --audio-file, disable the external track, seek,
and enable the external track again, the playback position of the
external file was off, and you would get major A/V desync. This was
actually supposed to work, but broke at some time ago (probably commit
2b87415f). It didn't work, because it attempted to seek the stream if it
was already selected, which was always true due to
reselect_demux_streams() being called before that.
Fix by putting the initial selection and the seek together.
This commit makes audio decoding non-blocking. If e.g. the network is
too slow the playloop will just go to sleep, instead of blocking until
enough data is available.
For video, this was already done with commit 7083f88c. For audio, it's
unfortunately much more complicated, because the audio decoder was used
in a blocking manner. Large changes are required to get around this.
The whole playback restart mechanism must be turned into a statemachine,
especially since it has close interactions with video restart. Lots of
video code is thus also changed.
(For the record, I don't think switching this code to threads would
make this conceptually easier: the code would still have to deal with
external input while blocked, so these in-between states do get visible
[and thus need to be handled] anyway. On the other hand, it certainly
should be possible to modularize this code a bit better.)
This will probably cause a bunch of regressions.
Broken by commit 1301a907. This commit added demuxer threading, and
changed some other things to make them simpler and more orthogonal. One
of these things was ntofications about streams that appear during
playback. That's an obscure corner case, but the change made handling of
it as natural as normal initialization.
This didn't work for two reasons:
1. When playing an ordered chapters file where the initial segment was
not from the main file, its streams were added to the track list. So
they were printed twice, and switching to the next segment didn't work,
because the right streams were not selected.
2. EDL, CUE, as well as possibly certain Matroska files don't have any
data or tracks in the "main" demuxer, so normally the first segment is
picked for the track list. This was simply broken.
Fix by sprinkling the code with various hacks.
In my opinion this is not really necessary, since there's only a single
user of update_video(), but others reading this code would probably hate
me for using magic integer values instead of symbolic constants.
This should be a purely cosmetic commit; any changes in behavior are
bugs.
Mouse cursor handling, --heartbeat-cmd, and OSD messages basically
relied on polling. For this reason, the playloop always used a small
timeout (not more than 500ms).
Fix these cases, and raise the timeout to 100 seconds. There is no
reason behind this number; for this specific purpose it's as close to
infinity as any other number.
On MS Windows, or if vo_sdl is used, the timeout remains very small.
In these cases the GUI code doesn't do proper event handling in the
first place, and fixing it requires much more effort.
getch2_poll() still does polling, because as far as I'm aware no event-
based way to detect this state change exists.
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
It's better to keep the logic in one place.
Also drop that a broken config file aborts loading of the player. I
don't see much reason for this, and it inflates the code slightly.
Basically, this allows gapless playback with similar files (including
the ordered chapter case), while still being robust in general.
The implementation is quite simplistic on purpose, in order to avoid
all the weird corner cases that can occur when creating the filter
chain. The consequence is that it might do not-gapless playback in
more cases when needed, but if that bothers you, you still can use
the normal gapless mode.
Just using "--gapless-audio" or "--gapless-audio=yes" selects the old
mode.
mpv_destroy() should perhaps better be called mpv_detach(), because it
destroys only the handle, not necessarily the player. The player is only
terminated if a quit command is sent.
This function quits automatically, and additionally waits until the
player is completely destroyed. It removes the possibility that the
player core is still uninitializing, while all client handles are
already destroyed. (Although in practice, the difference is usually not
important.)
Change how the video decoding loop works. The structure should now be a
bit easier to follow. The interactions on format changes are (probably)
simpler. This also aligns the decoding loop with future planned changes,
such as moving various things to separate threads.
And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE.
The real pause state can now be queried with the "core-idle" property,
the user pause state with the "pause" property, whether the player is
paused due to cache with "paused-for-cache", and the keep open event can
be guessed with the "eof-reached" property.
This property is set to "yes" if playback was paused due to --keep-open.
The change notification might not always be perfect; maybe that should
be improved.
And consistently use MP_NOPTS_VALUE as error value for the users of this
function. This is better than using -1, especially because negative
values can be valid timestamps.
Remove the ao_buffer_playable_samples field. This contained the number
of samples that fill_audio_out_buffers() wanted to write to the AO (i.e.
this data was supposed to be played at some point), but ao_play()
rejected it due to partial fill.
This could happen with many AOs, notably those which align all written
data to an internal period size (often called "outburst" in the AO
code), and the accepted number of samples is rounded down to period
boundaries. The left-over samples at the end were still kept in
mpctx->ao_buffer, and had to be played later.
The reason ao_buffer_playable_samples had to exist was to make sure that
at EOF, the correct number of left-over samples was played (and not
possibly other data in the buffer that had to be sliced off due to
endpts in fill_audio_out_buffers()). (You'd think you could just slice
the entire buffer, but I suspect this wasn't done because the end time
could actually change due to A/V sync changes. Maybe that was the reason
it's so complicated.)
Some commits ago, ao.c gained internal buffering, and ao_play() will
never return partial writes - as long as you don't try to write more
samples than ao_get_space() reports. This is always the case. The only
exception is filling the audio buffers while paused. In this case, we
decode and play only 1 sample in order to initialize decoding (e.g. on
seeking). Actually playing this 1 sample is in fact a bug, but even of
the AO doesn't have period size alignment, you won't notice it. In
summary, this means we can safely remove the code.
We want to move the AO to its own thread. There's no technical reason
for making the ao struct opaque to do this. But it helps us sleep at
night, because we can control access to shared state better.
For example, consider the case when audio initialization fails. Then the
audio track is deselected. Before this commit, this would have been
equivalent to the user disabling audio. This is bad when multiple files
are played at once (the next file would have audio disabled, even if it
works), or if playback resume is used (if e.g. audio output failed to
initialize, then audio would be disabled when resuming, even if the
system's audio driver was fixed).
The OSC used significant CPU time while the player was paused. It turned
out that the "tick" event sent during pause is the problem. The OSC
accesses the player core when receiving a tick event, which in turn will
cause the core to send another tick event, leading to infinite feedback.
Fix this by sending an idle tick only every 500ms. This is not very
proper, but the idea behind the tick event isn't very clean to begin
with (and the OSC should use timers instead).
This is approximate: we read each option value on program start
(before starting playback of a file), and when writing the resume
config, compare each value to the current state. This also means
when a value is changed and then changed back, it's not stored. In
particular, option values set in config files and on the command
line are considered the default.
This should help reducing the numbers of options overridden by the
resume config. If too much is overridden, it becomes an inconvenience,
because changes in config files will apparently have no effect when
resuming a file.
Also see github issue #574.
Not sure about this... might redo.
At least this provides a case of a broadcasted event, which requires
per-event data allocation.
See github issue #576.
The initialization code was split and refactored for the libmpv changes.
One change, moving a part of cocoa initialization, accidentally broke
--force-window on OSX, which creates a VO in a certain initialization
stage. We still don't know how cocoa should behave with libmpv, so fix
this with a hack to beat it back into working. Untested.
This library will export the client API functions.
Note that this doesn't allow compiling the command line player to link
against this library yet. The reason is that there's lots of weird stuff
required to setup the execution environment (mostly Windows and OSX
specifics), as well as things which are out of scope of the client API
and every application has to do on its own. However, since the mpv
command line player basically reuses functions from the mpv core to
implement these things, it's not very easy to separate the command
line player form the mpv core.
This is partial only, and it still accesses some MPContext internals.
Specifically, chapter and track lists are still read directly, and OSD
access is special-cased too.
The OSC seems to work fine, except using the fast-forward/backward
buttons. These buttons behave differently, because the OSC code had
certain assumptions how often its update code is called.
The Lua interface changes slightly.
Note that this has the odd property that Lua script and video start
at the same time, asynchronously. If this becomes an issue, explicit
synchronization could be added.
Add a client API, which is intended to be a stable API to get some rough
control over the player. Basically, it reflects what can be done with
input.conf commands or the old slavemode. It will replace the old
slavemode (and enable the implementation of a new slave protocol).
The code removed from handle_input_and_seek_coalesce() did two things:
1. If there's a queued seek, stop accepting non-seek commands, and delay
them to the next playloop iteration.
2. If a seek is executing (i.e. the seek was unqueued, and now it's
trying to decode and display the first video frame), stop accepting
seek commands (and in fact all commands that were queued after the
first seek command). This logic is disabled if seeking started longer
than 300ms ago. (To avoid starvation.)
I'm not sure why 1. would be needed. It's still possible that a command
immediately executed after a seek command sees a "seeking in progress"
state, because it affects queued seeks only, and not seeks in progress.
Drop this code, since it can easily lead to input starvation, and I'm
not aware of any disadvantages.
The logic in 2. is good to make seeking behave much better, as it
guarantees that the video display is updated frequently. Keep the core
idea, but implement it differently. Now this logic is applied to seeks
only. Commands after the seek can execute freely, and like with 1., I
don't see a reason why they couldn't. However, in some cases, seeks are
supposed to be executed instantly, so queue_seek() needs an additional
parameter to signal the need for immediate update.
One nice thing is that commands like sub_seek automatically profit from
the seek delay logic. On the other hand, hitting chapter seek multiple
times still does not update the video on chapter boundaries (as it
should be).
Note that the main goal of this commit is actually simplification of the
input processing logic and to allow all commands to be executed
immediately.
Do two things:
1. add locking to struct osd_state
2. make struct osd_state opaque
While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses
lots of osd_state (and osd_object) members. To make sure everything is
accessed synchronously, I prefer making osd_state opaque, even if it
means adding pretty dumb accessors.
All of this is meant to allow running VO in their own threads.
Eventually, VOs will request OSD on their own, which means osd_state
will be accessed from foreign threads.
These were needed before the last commit, but now they don't do anything
anymore. (They were used to decide whether to replace or stack the
previous OSD message when a new one was displayed.)
If certain OSD messages were displayed at the same time, the hidden
messages were put on the stack, and displayed again once the higher
priority messages disappeared. The idea was probably that lower priority
messages could not hide higher priority ones, and also that the lower
messages did not get lost.
But in practice, this gives confusing results with OSD messages randomly
reappearing for a brief time. Remove it.
Showing subtitles on terminal used the OSD message stack (which uses a
stack to "pile up" messages that were displayed at the same time). This
had a bunch of weird and annoying consequences. This accessed a certain
osd_state field, which is a minor annoyance since I want to make that
struct opaque. Implement this differently.
The terminal OSD code includes the handling of the terminal status line,
showing player OSD messages on the terminal, and showing subtitles on
terminal (the latter two only if there is no video window, or if
terminal OSD is forced).
This didn't handle some corner cases correctly. For example, showing an
OSD message on the terminal always cleared the previous line, even if
the line was an important message (or even just the command prompt, if
most other messages were silenced).
Attempt to handle this correctly by keeping track of how many lines the
terminal OSD currently consists of. Since there could be race conditions
with other messages being printed, implement this in msg.c. Now msg.c
expects that MSGL_STATUS messages rewrite the status line, so the caller
is forced to use a single mp_msg() call to set the status line.
Instead of littering print_status() all over the place, update the
status only once per playloop iteration in update_osd_msg(). In audio-
only mode, the status line might now be a little bit off, but it's
perhaps ok.
Print the status line only if it has changed, or if another message was
printed. This might help with extremely slow terminals, although in
audio+video mode, it'll still be updated very often (A-V sync display
changes on every frame).
Instead of hardcoding the terminal sequences, use
terminfo/termcap to get the sequences. Remove the --term-osd-esc option,
which allowed to override the hardcoded escapes - it's useless now.
The fallback for terminals with no escape sequences for moving the
cursor and clearing a line is removed. This somewhat breaks status line
display on these terminals, including the MS Windows console: instead of
querying the terminal size and clearing the line manually by padding the
output with spaces, the line is simply not cleared. I don't expect this
to be a problem on UNIX, and on MS Windows we could emulate escape
sequences. Note that terminal OSD (other than the status line) was
broken anyway on these terminals.
In osd.c, the function get_term_width() is not used anymore, so remove
it. To remind us that the MS Windows console apparently adds a line
break when writint the last column, adjust screen_width in terminal-
win.c accordingly.
Quvi subtitles are considered external subtitles (simply because they're
separate from the audio/video stream), but for the sake of subtitle
auto-selection, they should not be considered external.
Change this so that quvi subtitles are treated like muxed subtitles
(with default flag never set). This means subtitles won't be selected by
default, unless explicitly requested with --sid or --slang.
This is relatively hacky, but it's Christmas, so it's ok. This does two
things: 1. allow selecting two subtitle tracks, and 2. include a hack
that renders the second subtitle always as toptitle. See manpage
additions how to use this.
The only thing that used mp_load_per_file_config() was inside
configfiles.c too, so remove the declaration from core.h and move the
function before its use.
There's a single mp_msg() in path.c, but all path lookup functions seem
to depend on it, so we get a rat-tail of stuff we have to change. This
is probably a good thing though, because we can have the path lookup
functions also access options, so we could allow overriding the default
config path, or ignore the MPV_HOME environment variable, and such
things.
Also take the chance to consistently add talloc_ctx parameters to the
path lookup functions.
Also, this change causes a big mess on configfiles.c. It's the same
issue: everything suddenly needs a (different) context argument. Make it
less wild by providing a mp_load_auto_profiles() function, which
isolates most of it to configfiles.c.
Always pass around mp_log contexts in the option parser code. This of
course affects all users of this API as well.
In stream.c, pass a mp_null_log, because we can't do it properly yet.
This will be fixed later.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
wm4
Martin Herkt
xylosper
Marcin Kurczewski
Alessandro Ghedini
Stefano Pigozzi
Andrey Morozov
Tsukasa OMOTO