Add a generic mechanism to the VO to relay "extra" events from VO to
player. Use it to notify the core of window resizes, which in turn will
be used to mark all affected properties ("window-scale" in this case) as
changed.
(I refrained from hacking this as internal command into input_ctx, or to
poll the state change, etc. - but in the end, maybe it would be best to
actually pass the client API context directly to the places where events
can happen.)
When the VO was moved it its own thread, responsibility for redrawing
was given to the VO thread itself. So if there was a condition that
indicated that redrawing was required, like expose events or certain
VOCTRLs, the VO thread was redrawing itself.
This worked fine, but there are some corner cases where this works
rather badly. E.g. if I fullscreen the player and hit panscan controls
with mpv's default autorepeat rate, playback stops. This happens because
the VO redraws itself after every panscan change command. Running each
(repeated) command takes so long due to redrawing and (involuntary)
waiting on vsync, that it never leaves the input processing loop while
the key is held down. I suspect that in my case, redrawing in fullscreen
mode just gets slow enough that it takes 2 vsyncs instead of 1 on
average, and the processing time gets larger than the autorepeat delay.
Fix this by taking redraw control from the VO, and instead let the
playloop issue a "real" redraw command to the VO if needed. This
basically reverts redraw handling to what it was before moving the VO to
a thread.
CC: @mpv-player/stable
vo_vdpau uses its own framedrop code, mostly for historic reasons. It
has some tricky heuristics, of which I'm not sure how they work, or if
they have any effect at all, but in any case, I want to keep this code
for now. One day it might get fully ported to the vo.c framedrop code,
or just removed.
But improve its interaction with the user-visible framedrop controls.
Make --framedrop actually enable and disable the vo_vdpau framedrop
code, and increment the number of dropped frames correctly.
The code path for other VOs should be equivalent. The vo_vdpau behavior
should, except for the improvements mentioned above, be mostly
equivalent as well. One minor change is that frames "shown" during
preemption are always count as dropped.
Remove the statement from the manpage that vo_vdpau is the default; this
hasn't been the case for a while.
This could be used by VO implementations to report a recent vsync time
to the generic VO code, which in turn will use it and the display FPS
to estimate at which point in time the next vsync will happen.
This works only on X11, and only if the refresh rate changes due to the
window being moved to another screen (detected by us). It doesn't
include system screen reconfiguration yet.
This calls VOCTRL_GET_DISPLAY_FPS on every frame, which makes me uneasy.
It means extra thread communication with the win32 and Cocoa backends.
On the other hand, a frame doesn't happen _that_ often, and the
communication should still be pretty cheap and fast, so it's probably
ok.
Also needs some extra fuzz for vo_vdpau.c, because that does everything
differently.
This mostly uses the same idea as with vo_vdpau.c, but much simplified.
On X11, it tries to get the display framerate with XF86VM, and limits
the frequency of new video frames against it. Note that this is an old
extension, and is confirmed not to work correctly with multi-monitor
setups. But we're using it because it was already around (it is also
used by vo_vdpau).
This attempts to predict the next vsync event by using the time of the
last frame and the display FPS. Even if that goes completely wrong,
the results are still relatively good.
On other systems, or if the X11 code doesn't return a display FPS, a
framerate of 1000 is assumed. This is infinite for all practical
purposes, and means that only frames which are definitely too late are
dropped. This probably has worse results, but is still useful.
"--framedrop=yes" is basically replaced with "--framedrop=decoder". The
old framedropping mode is kept around, and should perhaps be improved.
Dropping on the decoder level is still useful if decoding itself is too
slow.
The previous commit broke these things, and fixing them is separate in
this commit in order to reduce the volume of changes.
Move the image queue from the VO to the playback core. The image queue
is a remnant of the old way how vdpau was implemented, and increasingly
became more and more an artifact. In the end, it did only one thing:
computing the duration of the current frame. This was done by taking the
PTS difference between the current and the future frame. We keep this,
but by moving it out of the VO, we don't have to special-case format
changes anymore. This simplifies the code a lot.
Since we need the queue to compute the duration only, a queue size
larger than 2 makes no sense, and we can hardcode that.
Also change how the last frame is handled. The last frame is a bit of a
problem, because video timing works by showing one frame after another,
which makes it a special case. Make the VO provide a function to notify
us when the frame is done, instead. The frame duration is used for that.
This is not perfect. For example, changing playback speed during the
last frame doesn't update the end time. Pausing will not stop the clock
that times the last frame. But I don't think this matters for such a
corner case.
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
With software decoding, images were uploaded to vdpau surfaces as they
were queued to the VO. This makes it slightly more complicated
(especially later on), and has no advantages - so stop doing it.
The only reason why this was done explicitly was due to attempts to keep
the code equivalent (instead of risking performance regressions). The
original code did this naturally for certain reasons, but now that we
can measure that it has no advantages and just requires extra code, we
can just drop it.
Follow up on commit 760548da. Mouse handling is a bit confusing, because
there are at least 3 coordinate systems associated with it, and it
should be cleaned up. But that is hard, so just apply a hack which gets
the currently-annoying issue (VO backends needing access to the VO) out
of the way.
VO backends which are or will run in their own thread have a problem
with vo_mouse_movement() calling vo_control(). Restrict this to VOs
which actually need this.
Until now, failure to allocate image data resulted in a crash (i.e.
abort() was called). This was intentional, because it's pretty silly to
degrade playback, and in almost all situations, the OOM will probably
kill you anyway. (And then there's the standard Linux overcommit
behavior, which also will kill you at some point.)
But I changed my opinion, so here we go. This change does not affect
_all_ memory allocations, just image data. Now in most failure cases,
the output will just be skipped. For video filters, this coincidentally
means that failure is treated as EOF (because the playback core assumes
EOF if nothing comes out of the video filter chain). In other
situations, output might be in some way degraded, like skipping frames,
not scaling OSD, and such.
Functions whose return values changed semantics:
mp_image_alloc
mp_image_new_copy
mp_image_new_ref
mp_image_make_writeable
mp_image_setrefp
mp_image_to_av_frame_and_unref
mp_image_from_av_frame
mp_image_new_external_ref
mp_image_new_custom_ref
mp_image_pool_make_writeable
mp_image_pool_get
mp_image_pool_new_copy
mp_vdpau_mixed_frame_create
vf_alloc_out_image
vf_make_out_image_writeable
glGetWindowScreenshot
Let the VOs draw the OSD on their own, instead of making OSD drawing a
separate VO driver call. Further, let it be the VOs responsibility to
request subtitles with the correct PTS. We also basically allow the VO
to request OSD/subtitles at any time.
OSX changes untested.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Until recently, the VO was an unavoidable part of the seeking code path.
This was because vdpau deinterlacing could double the framerate, and hr-
seek and framestepping etc. all had to "see" the additional frames. But
we've removed the frame doubling from the vdpau VO and moved it into a
video filter (vf_vdpaupp), and there's no reason left why the VO should
participate in seeking.
Instead of queuing frames to the VO during seek and skipping them
afterwards, drop the frames early.
This actually might make seeking with vo_vdpau and software decoding
faster, although I haven't measured it.
Doesn't really seem to be much of use. Get rid of the remaining uses of
it.
Concerning vo_opengl_old, it seems uninitGl() works fine even if called
before initialization.
Change how the video decoding loop works. The structure should now be a
bit easier to follow. The interactions on format changes are (probably)
simpler. This also aligns the decoding loop with future planned changes,
such as moving various things to separate threads.
Remove the special casing of vo_vdpau vs. other VOs. Replace the
complicated interaction between vo.c and vo_vdpau.c with a simple queue
in vo.c. VOs other than vdpau are handled by setting the length of the
queue to 1 (this is essentially what waiting_mpi was).
Note that vo_vdpau.c seems to have buffered only 1 or 2 frames into the
future, while the remaining 3 or 4 frames were past frames. So the new
code buffers 2 frames (vo_vdpau.c requests this queue length by setting
vo->max_video_queue to 2). It should probably be investigated why
vo_vdpau.c kept so many past frames.
The field vo->redrawing is removed. I'm not really sure what that would
be needed for; it seems pointless.
Future directions include making the interface between playloop and VO
simpler, as well as making rendering a frame a single operation, as
opposed to the weird 3-step sequence of rendering, drawing OSD, and
flipping.
Add the event FD after preinit, remove it before destroy. There's no
need to do it on vo_config, and there's no need to remove the event
FD when vo_config fails.
For rotation, we assume that the source image will be rotated within the
VO, so the aspect/panscan code needs to calculate its param using
rotated coordinates. VOs which support rotation natively can use this.
I hate tabs.
This replaces all tabs in all source files with spaces. The only
exception is old-makefile. The replacement was made by running the
GNU coreutils "expand" command on every file. Since the replacement was
automatic, it's possible that some formatting was destroyed (but perhaps
only if it was assuming that the end of a tab does not correspond to
aligning the end to multiples of 8 spaces).
This commit adds support for automatic selection of color profiles based on
the display where mpv is initialized, and automatically changes the color
profile when display is changed or the profile itself is changed from
System Preferences.
@UliZappe was responsible with the testing and implementation of a lot of this
commit, including the original implementation of `cocoa_get_icc_profile_path`
(See #594).
Fixes#594
Reduce most dependencies on struct mp_csp_details, which was a bad first
attempt at dealing with colorspace stuff. Instead, consistently use
mp_image_params.
Code which retrieves colorspace matrices from csputils.c still uses this
type, though.
The main difference between the old and new callbacks is that the old
callbacks required passing the window size, which is and always was very
inconvenient and confusing, since the window size is already in
vo->dwidth and vo->dheight.
Rename vo_get_src_dst_rects() to mp_get_src_dst_rects() and make it
independent from the VO (it takes a comical amount of parameters now to
pass all required state). Add a convenience wrapper with the name
vo_get_src_dst_rects() to vo.c. Replace all aspdat and vo usages with
immediate parameters.
Functionally, nothing should change, except that the window size is
clamped to a minimum of size 1 much earlier, and some log messages
change the prefix (don't bother with vo.vo_log stuff).
For some reason, this made all VO backends both set the screen
resolution in opts->screenwidth/height, and call
aspect_save_screenres(). Remove the latter. Move the code to calculate
the PAR-corrected window size from aspect.c to vo.c, and make it so that
the monitor PAR is recalculated when it makes sense.
How embarrassing...
This code is inactive for all VOs other than vo_vdpau. For vo_vdpau,
this caused various issues, such as stuttering after about an hour of
running mpv; see github issue #403.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
Keep track of the default values directly, instead of creating a new
instance of the option struct just to get the defaults.
Also get rid of the special handling of m_obj_desc.init_options.
Instead, handle it purely by the option parser. Originally, I wanted to
handle --vo=opengl-hq and --vo=direct3d_shaders with this (by making
them aliases to the real VOs with a different preset), but since --vo
=opengl-hq=help prints the wrong values (as consequence of the
simplification), I'm not doing that, and instead use something
different.
This commit adds the --force-window option, which will cause mpv always
to create a window when started. This can be useful when pretending that
mpv is a GUI application (which it isn't, but users pretend anyway), and
playing audio files would run mpv in the background without giving a
window to control it.
This doesn't actually create the window immediately: it only does so
only after initializing playback and when it is clear that there won't
be any actual video. This could be a problem when starting slow or
completely stuck network streams (mpv would remain frozen in the
background), or if video initialization somehow is stuck forever in
an in-between state (like when the decoder doesn't output a video
frame, but doesn't return an error either). Well, we can pretend only
so much that mpv is a GUI application.
This is supposed to reduce the amount of useless error messages shown
during initialization of vo_opengl. If multiple backends are compiled,
usually only one of them will work. For example, on Linux both X and
Wayland backends can be compiled, but usually either Wayland or X is
running. Then, if Wayland is not running, but X is, trying to initialize
the Wayland backend should not spam the terminal with error messages.
Signed-off-by: Andreas Sinz <andreas.sinz@aon.at>
This is based on the MPlayer VA API patches. To be exact it's based on
a very stripped down version of commit f1ad459a263f8537f6c from
git://gitorious.org/vaapi/mplayer.git.
This doesn't contain useless things like benchmarking hacks and the
demo code for GLX interop. Also, unlike in the original patch, decoding
and video output are split into separate source files (the separation
between decoding and display also makes pixel format hacks unnecessary).
On the other hand, some features not present in the original patch were
added, like screenshot support.
VA API is rather bad for actual video output. Dealing with older libva
versions or the completely broken vdpau backend doesn't help. OSD is
low quality and should be rather slow. In some cases, only either OSD
or subtitles can be shown at the same time (because OSD is drawn first,
OSD is prefered).
Also, libva can't decide whether it accepts straight or premultiplied
alpha for OSD sub-pictures: the vdpau backend seems to assume
premultiplied, while a native vaapi driver uses straight. So I picked
straight alpha. It doesn't matter much, because the blending code for
straight alpha I added to img_convert.c is probably buggy, and ASS
subtitles might be blended incorrectly.
Really good video output with VA API would probably use OpenGL and the
GL interop features, but at this point you might just use vo_opengl.
(Patches for making HW decoding with vo_opengl have a chance of being
accepted.)
Despite these issues, decoding seems to work ok. I still got tearing
on the Intel system I tested (Intel(R) Core(TM) i3-2350M). It was also
tested with the vdpau vaapi wrapper on a nvidia system; however this
was rather broken. (Fortunately, there is no reason to use mpv's VAAPI
support over native VDPAU.)
Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This
file is named so because because it's written against the "old"
libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau").
Add support for the "new" libavcodec vdpau support. This was recently
added and replaces the "old" vdpau parts. (In fact, Libav is about to
deprecate and remove the "old" API without deprecation grace period,
so we have to support it now. Moreover, there will probably be no Libav
release which supports both, so the transition is even less smooth than
we could hope, and we have to support both the old and new API.)
Whether the old or new API is used is checked by a configure test: if
the new API is found, it is used, otherwise the old API is assumed.
Some details might be handled differently. Especially display preemption
is a bit problematic with the "new" libavcodec vdpau support: it wants
to keep a pointer to a specific vdpau API function (which can be driver
specific, because preemption might switch drivers). Also, surface IDs
are now directly stored in AVFrames (and mp_images), so they can't be
forced to VDP_INVALID_HANDLE on preemption. (This changes even with
older libavcodec versions, because mp_image always uses the newer
representation to make vo_vdpau.c simpler.)
Decoder initialization in the new code tries to deal with codec
profiles, while the old code always uses the highest profile per codec.
Surface allocation changes. Since the decoder won't call config() in
vo_vdpau.c on video size change anymore, we allow allocating surfaces
of arbitrary size instead of locking it to what the VO was configured.
The non-hwdec code also has slightly different allocation behavior now.
Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau
doesn't work anymore (a warning suggesting the --hwdec option is
printed instead).
Nothing should change from user perspective.
mpv --vo=opengl:help now works.
Remove the vo_opengl inline help text. The new code can list option
names for you, but that's it. Refer to the manpage if you have trouble.
There was a MPOpts fullscreen field, a mp_vo_opts.fs field, and
VOFLAG_FULLSCREEN. Remove all these and introduce a
mp_vo_opts.fullscreen flag instead.
When VOs receive VOCTRL_FULLSCREEN, they are supposed to set the
current fullscreen mode to the state in mp_vo_opts.fullscreen. They
also should do this implicitly on config().
VOs which are capable of doing so can update the mp_vo_opts.fullscreen
if the actual fullscreen mode changes (e.g. if the user uses the
window manager controls). If fullscreen mode switching fails, they
can also set mp_vo_opts.fullscreen to the actual state.
Note that the X11 backend does almost none of this, and it has a
private fs flag to store the fullscreen flag, instead of getting it
from the WM. (Possibly because it has to deal with broken WMs.)
The fullscreen option has to be checked on config() to deal with
the -fs option, especially with something like:
mpv --fs file1.mkv --{ --no-fs file2.mkv --}
(It should start in fullscreen mode, but go to windowed mode when
playing file2.mkv.)
Wayland changes by: Alexander Preisinger <alexander.preisinger@gmail.com>
Cocoa changes by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
This was bad, because it was the only aspdat member updated by
vo_get_src_dst_rects() instead of vo_reconfig(). Now it isn't
accessed anymore, so remove it.
For some reason mp_fifo specifically handled double clicks, and other
than that was a pointless wrapper around input.c functionality.
Move the double click handling into input.c, and get rid of mp_fifo. Add
some compatibility wrappers, because so much VO code uses these
functions. Where struct mp_fifo is still used it's just a casted
struct input_ctx.
Before this commit, mouse movement events emitted a special command
("set_mouse_pos"), which was specially handled in command.c. This was
once special-cased to the dvdnav and menu code, and did nothing after
libmenu and dvdnav were removed.
Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"),
which then can be bound to an arbitrary command. The mouse position is
now managed in input.c. A command which actually needs the mouse
position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos()
to query it. The former returns raw window-space coordinates, while the
latter returns coordinates transformed to OSD- space. (Both are the same
for most VOs, except vo_xv and vo_x11, which can't render OSD in
window-space. These require extra code for mapping mouse position.)
As of this commit, there is still nothing that uses mouse movement, so
MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the
mouse (much like MOUSE_BTN0).
Extend the concept of input sections. Allow multiple sections to be
active at once, and organize them as stack. Bindings from the top of
the stack are preferred to lower ones.
Each section has a mouse input section associated, inside which mouse
events are associated with the bindings. If the mouse pointer is
outside of a section's mouse area, mouse events will be dispatched to
an input section lower on the stack of active sections. This is intended
for scripting, which is to be added later. Two scripts could occupy
different areas of the screen without conflicting with each other. (If
it turns out that this mechanism is useless, we'll just remove it
again.)
The filter chain and the video ouputs have config() functions. They are
strictly limited to transfering the video size and format. Other
parameters (like color levels) have to be transferred separately.
Improve upon this by introducing a separate set of reconfig() functions,
which use mp_image_params to carry format parameters. This struct
contains all image format related parameters from config(), plus
additional parameters such as colorspace.
Change vf_rotate to use it, as well as vo_opengl. vf_rotate is just
an example/test case, but vo_opengl will need it later.
The intention is also to get rid of VOCTRL_SET_YUV_COLORSPACE. This
information is now handed to the VOs via reconfig(). The getter,
VOCTRL_GET_YUV_COLORSPACE, will still be needed though.
Instead of implicitly changing the window title on config(), do it as
part of the new VOCTRL.
At first I wanted to make all VOs use the VOCTRL argument directly, but
on a second thought it appears vo_get_window_title() is much more useful
for some (namely, if the window is created lazily on first config()).
Not all VOs are changed. Wayland and OSX have to follow.
This make the intention more apparent, and some VOs are actually using
true instead of VO_TRUE in some places. Hopefully this changes makes it
less confusing (instead of more).
The C99 constants true/false are defined to 1/0 as well, so this commit
doesn't actually change anything.
This is slightly better because VOCTRL_RESUME/VOCTRL_PAUSE are usually
needed by VOs to know whether video is actually being played (for
whatever reason), and they wouldn't be passed to the backend's VOCTRL
handler, like vo_x11_control().
Also try to make sure that these flags (both pause state and screensaver
state) are set consistently in some corner cases. For example, it seems
enabling video in the middle of playing a file while the player is
paused would not set the paused flag.
If codec initialization fails, destroy the VO instead of keeping it
around to make sure the state is consistent.
Framestepping is implemented by unpausing the player for the duration of
a frame. Remove the special handling of VOCTRL_PAUSE/RESUME in these
cases. It was most likely needed because these VOCTRLs used to be
important for screen redrawing (blatant guess), which is now handled
completely differently. The only potentially bad side-effect is that the
screensaver will be disabled/reenabled for the duration of one frame.
GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
This was used by some VOs to do timing of cursor autohiding, but we
recently moved that out of the VOs. Even though this mechanism might
be a good idea and could be needed again in future (but for what?),
it's unused now. So better just get rid of it.
Use VOCTRL_CHECK_EVENTS instead. Change the remaining VOs to use it.
Only vo_sdl and vo_caca actually need this, and vo_null, vo_lavc, and
vo_image had stubs only.
Instead of having separate callbacks for each backend-handled feature
(like MPGLContext.fullscreen, MPGLContext.border, etc.), pass the
VOCTRL responsible for this directly to the backend. This allows
removing a bunch of callbacks, that currently must be set even for
optional/lesser features (like VOCTRL_BORDER).
This requires changes to all VOs using gl_common, as well as all
backends that support gl_common.
Also introduce VOCTRL_CHECK_EVENTS. vo.check_events is now optional.
VO backends can use VOCTRL_CHECK_EVENTS instead to implementing
check_events. This has the advantage that the event handling code in
VOs doesn't have to be duplicated if vo_control() is used.
Allows playing video with alpha information on X11, as long as the video
contains alpha and the window manager does compositing. See vo.rst.
Whether a window can be transparent is decided by the choice of the X
Visual used for window creation. Unfortunately, there's no direct way to
request such a Visual through the GLX or the X API, and use of the
XRender extension is required to find out whether a Visual implies a
framebuffer with alpha used by XRender (see for example [1]). Instead of
depending on the XRender wrapper library (which would require annoying
configure checks, even though XRender is virtually always supported),
use a simple heuristics to find out whether a Visual has alpha. Since
getting it wrong just means an optional feature will not work as
expected, we consider this ok.
[1] http://stackoverflow.com/questions/4052940/how-to-make-an-opengl-rendering-context-with-transparent-background/9215724#9215724
gl_video.c contains all rendering code, gl_lcms.c the .icc loader and
creation of 3D LUT (and all LittleCMS specific code). vo_opengl.c is
reduced to interfacing between the various parts.
Remove lots of weird logic and dead code.
The only difference is that when specifying a monitor aspect ratio, it
will always upscale and never downscale.
Separate the video output options from the big MPOpts structure and also only
pass the new mp_vo_opts structure to the vo backend.
Move video_driver_list into mp_vo_opts
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
When paused, --cursor-autohide worked with a precision of 500ms, which
is the main loop's default sleep time when paused. Cursor hiding is
polled in x11_common, and the main loop never called the X11 code at
the right time. Fix this by allowing the VO to set a time when it
should be called next.
Store the window state (position and size) in vo_x11_state, instead of
in vo->dx/dy/dwidth/dheight. The VO variables are overwritten by vo.c on
every vo_config() call, which is extremely not helpful.
Now vo->dx/dy are mostly unused (except for passing the position forced
by the --geometry option), and vo->dwidth/dheight are set for the VO,
and otherwise read for resize detection only.
In the long term, the way vo_config() handles the --geometry option
should be changed, and vo->dx/dy should be removed.
Remove some useless stuff: VO_EVENT_MOVE and VO_EVENT_KEYPRESS were
generated, but unused. Wayland changes by Alexander Preisinger.
It was once used for vo_sdl (the old one based on SDL 1.2), since SDL
apparently lost the GL state when switching to fullscreen. The new
vo_sdl (using SDL 1.3) doesn't use or need this. It's dead code, so
get rid of it.
VFCAP_OSD was used to determine at runtime whether the VO supports OSD
rendering. This was mostly unused. vo_direct3d had an option to disable
OSD (was supposed to allow to force auto-insertion of vf_ass, but we
removed that anyway). vo_opengl_old could disable OSD rendering when a
very old OpenGL version was detected, and had an option to explicitly
disable it as well.
Remove VFCAP_OSD from everything (and some associated logic). Now the
vo_driver.draw_osd callback can be set to NULL to indicate missing OSD
support (important so that vo_null etc. don't single-step on OSD
redraw), and if OSD support depends on runtime support, the VO's
draw_osd should just do nothing if OSD is not available.
Also, do not access vo->want_redraw directly. Change the want_redraw
reset logic for this purpose, too. (Probably unneeded, vo_flip_page
resets it already.)
All wayland only specific routines are placed in wayland_common.
This makes it easier to write other video outputs.
The EGL specific parts, as well as opengl context creation, are in gl_common.
This backend works for:
* opengl-old
* opengl
* opengl-hq
To use it just specify the opengl backend
--vo=opengl:backend=wayland
or disable the x11 build.
Don't forget to set EGL_PLATFORM to wayland.
Co-Author: Scott Moreau
(Sorry I lost the old commit history due to the file structure changes)
This allowed making the player switch the monitor video mode when
creating the video window. This was a questionable feature, and with
today's LCD screens certainly not useful anymore. Switching to a random
video mode (going by video width/height) doesn't sound too useful
either.
I'm not sure about the win32 implementation, but the X part had several
bugs. Even in mplayer-svn (where x11_common.c hasn't been receiving any
larger changes for a long time), this code is buggy and doesn't do the
right thing anyway. (And what the hell _did_ it do when using multiple
physical monitors?)
If you really want this, write a shell script that calls xrandr before
and after calling mpv.
vo_sdl still can do mode switching, because SDL has native support for
it, and using it is trivial. Add a new sub-option for this.
You can just use --wid=0 if you really want this.
This only worked/works for X11, and even then it might interact badly
with most desktop environments. All the option did was setting --wid to
0, and the property did nothing.
mpv -ao help and mpv -vo help shouldn't show the encoding outputs (named
"lavc" on both cases). Also make it impossible to select these manually
when not encoding.
mplayer's video chain traditionally used FourCCs for pixel formats. For
example, it used IMGFMT_YV12 for 4:2:0 YUV, which was defined to the
string 'YV12' interpreted as unsigned int. Additionally, it used to
encode information into the numeric values of some formats. The RGB
formats had their bit depth and endian encoded into the least
significant byte. Extended planar formats (420P10 etc.) had chroma
shift, endian, and component bit depth encoded. (This has been removed
in recent commits.)
Replace the FourCC mess with a simple enum. Remove all the redundant
formats like YV12/I420/IYUV. Replace some image format names by
something more intuitive, most importantly IMGFMT_YV12 -> IMGFMT_420P.
Add img_fourcc.h, which contains the old IDs for code that actually uses
FourCCs. Change the way demuxers, that output raw video, identify the
video format: they set either MP_FOURCC_RAWVIDEO or MP_FOURCC_IMGFMT to
request the rawvideo decoder, and sh_video->imgfmt specifies the pixel
format. Like the previous hack, this is supposed to avoid the need for
a complete codecs.cfg entry per format, or other lookup tables. (Note
that the RGB raw video FourCCs mostly rely on ffmpeg's mappings for NUT
raw video, but this is still considered better than adding a raw video
decoder - even if trivial, it would be full of annoying lookup tables.)
The TV code has not been tested.
Some corrective changes regarding endian and other image format flags
creep in.
VFCAP_TIMER disables any additional waiting done by mpv in the
playloop. Remove VFCAP_TIMER, but re-use the idea for vo_image and
vo_lavc.
This means --untimed doesn't have to be passed when using --vo=image.
Change the entire filter API to use reference counted images instead
of vf_get_image().
Remove filter "direct rendering". This was useful for vf_expand and (in
rare cases) vf_sub: DR allowed these filters to pass a cropped image to
the filters before them. Then, on filtering, the image was "uncropped",
so that black bars could be added around the image without copying. This
means that in some cases, vf_expand will be slower (-vf gradfun,expand
for example).
Note that another form of DR used for in-place filters has been replaced
by simpler logic. Instead of trying to do DR, filters can check if the
image is writeable (with mp_image_is_writeable()), and do true in-place
if that's the case. This affects filters like vf_gradfun and vf_sub.
Everything has to support strides now. If something doesn't, making a
copy of the image data is required.
vdpau hardware decoding used the DR (direct rendering) path to let the
decoder query a surface from the VO. Special-case the HW decoding path
instead, to make it separate from DR.
Slices allowed filtering or drawing video in horizontal bands or
blocks. This allowed working on the video in smaller units. In theory,
this could bring a performance win by lowering cache pressure, as you
didn't have to keep the whole video frame in cache while filtering,
only the slice.
In practice, the slice code path was barely used for the following
reasons:
- Multithreaded decoding with ffmpeg didn't use slices. The ffmpeg
slice callback was disabled, because it can be called from another
thread, and the mplayer video chain is not thread-safe.
- There was nothing that would turn "full" images into appropriate
slices, so slices were rarely used.
- Most filters didn't actually support slices.
On the other hand, supporting slices lead to code duplication and more
complex code in general. I made some experiments and didn't find any
actual measurable performance improvements when using slices. Even
ffmpeg removed slices based filtering from libavfilter in favor of
simpler code.
The most broken thing about the slices code path is that slices can't
be queued, like it is done for images in vo.c.
For some reason, libavcodec abuses the slices rendering code path for
hardware decoding: in that case, the only purpose of the draw callback
is to pass a vdpau video surface object to video output. (It is unclear
to me why this had to use the slices code, instead of just returning an
AVFrame with the required vdpau state.)
Make this code separate within mpv, so that the internal slices code
path is not used for hardware decoding. Pass the vdpau state with
VOCTRL_HWDEC_DECODER_RENDER instead.
Remove the mencoder specific VOCTRLs.
Remove VOCTRL_DRAW_IMAGE and always set vo_driver.draw_image in VOs.
Make draw_image mandatory: change some VOs (like vo_x11) to support it,
and remove the image-to-slices fallback in vf_vo.
Remove vo_driver.is_new. This member indicated whether draw_image is
supported unconditionally, which is now always the case.
draw_image_pts is a hack until the video filter chain is changed to
include the PTS as field in mp_image. Then vo_vdpau and vo_lavc will
be changed to use draw_image.
This is better than having just the operating system type decide the
wakeup period, as e.g. when compiling for Win32/cygwin, a wakeup period
of 0.5 would work perfectly fine.
Instead, the default wakeup period is now only decided by availability
of a working select() system call (which is the case on cygwin but not
mingw and MSVC) AND a vo that can provide an event file descriptor or a
similar hack (vo_corevideo). vos that cannot do either need polling for
event handling and now can set the wakeup period to 0.02 in the vo code.
The -zoom option enabled scaling with vo_x11. Remove the -zoom option,
and make its behavior default. Since vo_x11 has to use libswscale for
colorspace conversion anyway, which doesn't do actual extra scaling when
vo_x11 is run in windowed mode, there should be no speed difference with
this change.
The code removed from vf_scale attempted to scale the video to d_width/
d_height, which matters for anamorphic video and the --xy option only.
vo_x11 can handle these natively. The only case for which the removed
vf_scale code could matter is encoding with vo_lavc, but since that
didn't set VOFLAG_SWSCALE, nothing actually changes.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
wm4
Stefano Pigozzi
Alexander Preisinger
Rudolf Polzer