Following commit 84ccebd9, the internal helpers don't allow GL_RGB and
GL_RGBA as internal formats for FBO attachments anymore.
While OpenGL itself is perfectly fine with it, I don't see much of a
reason to bother, and mixing sized and unsized internal formats is
confusing anyway.
Just remove these formats.
This is now a configurable option, with tunable parameters.
I got inspiration for these algorithms off wikipedia. "simple" seems to
work pretty well, but not well enough to make it a reasonable default.
Some other notable candidates:
- Local functions (e.g. based on local contrast or gradient)
- Clamp with soft knee (linear up to a point)
- Mapping in CIE L*Ch. Map L smoothly, clamp C and h.
- Color appearance models
These will have to be implemented some other time.
Note that the parameter "peak_src" to pass_tone_map should, in
principle, be auto-detected from the SEI information of the source file
where available. This will also have to be implemented in a later
commit.
Currently, this relies on the user manually entering their display
brightness (since we have no way to detect this at runtime or from ICC
metadata). The default value of 250 was picked by looking at ~10 reviews
on tftcentral.co.uk and realizing they all come with around 250 cd/m^2
out of the box. (In addition, ITU-R Rec. BT.2022 supports this)
Since there is no metadata in FFmpeg to indicate usage of this TRC, the
only way to actually play HDR content currently is to set
``--vf=format=gamma=st2084``. (It could be guessed based on SEI, but
this is not implemented yet)
Incidentally, since SEI is ignored, it's currently assumed that all
content is scaled to 10,000 cd/m^2 (and hard-clipped where out of
range). I don't see this assumption changing much, though.
As an unfortunate consequence of the fact that we don't know the display
brightness, mixed with the fact that LittleCMS' parametric tone curves
are not flexible enough to support PQ, we have to build the 3DLUT
against gamma 2.2 if it's used. This might be a good thing, though,
consdering the PQ source space is probably not fantastic for
interpolation either way.
Partially addresses #2572.
This macro takes care of rotation, swizzling, integer conversion and
normalization automatically. I found the performance impact to be
nonexistant for superxbr and debanding, although rotation *did* have an
impact due to the extra matrix multiplication. (So it gets skipped where
possible)
All of the internal hooks have been rewritten to use this new mechanism,
and the prescaler hooks have finally been separated from each other.
This also means the prescale FBO kludge is no longer required.
This fixes image corruption for image formats like 0bgr, and also fixes
prescaling under rotation. (As well as other user hooks that have
orientation-dependent access)
The "raw" attributes (tex, tex_pos, pixel_size) are still un-rotated, in
case something needs them, but ideally the hooks should be rewritten to
use the new API as much as possible. The hooked texture has been renamed
from just NAME to NAME_raw to make script authors notice the change (and
also deemphasize direct texture access).
This is also a step towards getting rid of the use_integer pass.
This replaces the previous TRANSFORM by WIDTH, HEIGHT and OFFSET where
WIDTH and HEIGHT are RPN expressions. This allows for more fine-grained
control over the output size, and also makes sure that overwriting
existing textures works more cleanly.
(Also add some more useful bstr functions)
This allows users to add their own near-arbitrary hooks to the vo_opengl
processing pipeline, greatly enhancing the flexibility of user shaders.
This enables, among other things, user shaders such as CrossBilateral,
SuperRes, LumaSharpen and many more.
To make parsing the user shaders easier, shaders are now loaded as
bstrs, and the hooks are set up during video reconfig instead of on
every single frame.
This uses the normal autoprobing rules like "auto", but rejects anything
that isn't flagged as copying data back to system memory.
The chunk in command.c was dead code, so remove it instead of updating
it.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
Some of this documentation was left woefully inaccurate as color
management in mpv evolved. This commit updates all of the wording and
adds notes and comments where appropriate.
Options/properties that are choices, and which include "yes" or "no"
values (or both) can now be read and written as MPV_FORMAT_FLAG.
For write access, rejecting flags in these cases was obnoxiously
unintuitive and inconvenient.
For read access, the value of this is less convincing, and actually it's
a major API change. At this point I probably have to admit that the
finer details of the client API are very unstable.
Introduce hwdec-current and hwdec-interop properties.
Deprecate hwdec-detected, which never made a lot of sense, and which is
replaced by the new properties. hwdec-active also becomes useless, as
hwdec-current is a superset, so it's deprecated too (for now).
First of all, black point compensation is now on by default. This is
really rather harmless and only improves the result (where "improvement"
means "less black clipping").
Second, this adds an option to limit the ICC profile's contrast, which
helps for untagged matrix profiles that are implicitly black scaled even
in colorimetric intent. (Note that this relies on BPC being enabled to
work properly, which is why the two changes are tied together)
Third, this uses the LittleCMS built in black point estimator instead of
relying on the presence of accurate A2B tables. This also checks tags
and does some amounts of noise elimination.
If the option is unspecified and the profile is missing black point
information, print a warning instructing the user to set the option, and
fall back to 1000 otherwise.
Flag that is set by default. Reseting it will result in mpv trying to fit
client area with video instead of the whole window with border and
decorations on the screen.
Marked as (Windows only) for now until it's implemented on other platforms.
--sub-ass=no / --ass=no still work, but --ass-style-override=strip is
preferred now. With this change, --ass-style-override can control all
the types of style overriding.
This gives us 16 bit fixed-point integer texture formats, including
ability to sample from them with linear filtering, and using them as FBO
attachments.
The integer texture format path is still there for the sake of ANGLE,
which does not support GL_EXT_texture_norm16 yet.
The change to pass_dither() is needed, because the code path using
GL_R16 for the dither texture relies on glTexImage2D being able to
convert from GL_FLOAT to GL_R16. GLES does not allow this. This could be
trivially fixed by doing the conversion ourselves, but I'm too lazy to
do this now.
This uses ID3D11VideoProcessor to convert the video to a RGBA surface,
which is then bound to ANGLE. Currently ANGLE does not provide any way
to bind nv12 surfaces directly, so this will have to do.
ID3D11VideoContext1 would give us slightly more control about the
colorspace conversion, though it's still not good, and not available
in MinGW headers yet.
The video processor is created lazily, because we need to have the coded
frame size, of which AVFrame and mp_image have no concept of. Doing the
creation lazily is less of a pain than somehow hacking the coded frame
size into mp_image.
I'm not really sure how ID3D11VideoProcessorInputView is supposed to
work. We recreate it on every frame, which is simple and hopefully
doesn't affect performance.
Commit 382bafcb changed the behavior for ab-loop-a. This commit changes
ab-loop-b so that the behavior is symmetric.
Adjust the OSD rendering accordingly to the two changes.
Also fix mentions of the "ab_loop" command to the now preferred
"ab-loop".
If a mpv_node wrapped a string, the behavior was different from calling
mpv_set_property() with MPV_FORMAT_STRING directly. Change this.
The original intention was to be strict about types if MPV_FORMAT_NODE
is used. But I think the result was less than ideal, and the same change
towards less strict behavior was made to mpv_set_option() ages ago.
In the past, --video-unscaled also disabled zooming and aspect ratio
corrections. But this didn't make much sense in terms of being a useful
option. The new behavior just sets the initial video size to be
unscaled, but it's still affected by zoom commands and aspect ratio
corrections.
To get the old behavior back, --video-aspect=0 --video-zoom=0 need to be
added as well (in the general case). Most of the time it should not make
a difference though.
Also, there seems to have been some additional dst_rect clamping code
inside src_dst_split_scaling that didn't seem to either be necessary nor
ever get triggered. (The code immediately above it already makes sure to
crop the video if it's larger than the dst_rect)
No idea why it was there, but I just removed it.
It's pretty "unfriendly" and causes too many issues. (Probably. At least
they're more obvious to a user than e.g. broken frame timing.)
Potentially we could apply heuristics like applying this only on
fullscreen, but let's not. It's up to the user to configure this to
get best results.
Fixes#2997.
The past behavior was a bit weird, especially when zooming out. There
was no simple way to zoom in or out in consistent increments using
keybindings alone.
The new behavior preserves most of the old behavior's semantics but
scales out to infinity better. It coincidentally also makes it
really easy to get clean power of 2 ratios (e.g. 2x, 4x, 8x and their
inverses).
Fixes#3004.
This commit adds the d3d11va-copy hwdec mode using the ffmpeg d3d11va
api. Functions in common with dxva2 are handled in a separate decode/d3d.c
file. A future commit will rewrite decode/dxva2.c to share this code.
Should reflect I/O speed.
This could go into the terminal status line. But I'm not sure how to put
it there, since it already uses too much space, so it's not there yet.
This colorspace has been historically used as a calibration target for
most digital projectors and sees some involvement in the UltraHD
standards, so it's a useful addition to mpv.
This changes behavior somewhat. The old behavior can be restored by
running "mp.use_suspend=true". It was originally introduced for the OSC,
but I can't reproduce whatever misbehavior I was seeing.
(See mp.suspend()/resume() for explanations what the suspend mechanism
does.)
* Use the update-core command
* Add --check-c-compiler=gcc to be safe
* Add warning about potential pitfalls of adding C:\msys2\mingw64\bin to %PATH%
* Recommend winpty
* Add note about ANGLE
Changing the byte stream position without cooperation of the demuxer
seems a bit insane, and is certainly useless. A user should do factor
seeks instead. For formats like ts, this will actually translate to byte
seeks, while treating the rest of the playback chain a bit more
gracefully. With this argument, remove write access to this property.
If someone really complains, proper byte seeks could be added as seek
mode (although I'm going to need a convincing argument for this).
Read access changes too, but in a more subtle way.
Since prescale now literally only affects the luma plane (and the
filters are all designed for luma-only operation either way), the option
has been renamed and the documentation updated to clarify this.
Was only available via --vd=help and --ad=help (i.e. not at all via
client API). Not bothering with separating audio and video codecs, since
this list isn't all that useful anyway in general. If someone complains,
a type field could be added.
Export a number of container fields, which may or may not be useful in
some scenarios. They are explicitly marked as originating from the
demuxer, in order to make it explicit that they might be unreliable.
I'd actually like to remove all other cases where container information
is exported, but those numerous cases are going to be somewhat hard to
deprecate.
Also, not directly related, export the description of the currently
active decoder. (This has been requested before.)
Adds always-on mode by internally utilizing hidetimeout as negative and
forbidding the user to set negative values.
This removes script-message to enable/disable the osc, and instead introduces a
combined 'visibility' control with the values never/auto/always.
It's available via script_opts and script_message as 'osc-visibility'.
As message, it also supports a 'cycle' value.
The del key is bound to cycling the visibility modes.
See --lavfi-complex option.
This is still quite rough. There's no support for dynamic configuration
of any kind. There are probably corner cases where playback might freeze
or burn 100% CPU (due to dataflow problems when interaction with
libavfilter).
Future possible plans might include:
- freely switch tracks by providing some sort of default track graph
label
- automatically enabling audio visualization
- automatically mix audio or stack video when multiple tracks are
selected at once (similar to how multiple sub tracks can be selected)
GLES does not support high bit depth fixed point textures for unknown
reasons, so direct 10 bit input is not possible. But we can still use
integer textures, which are supported by GLES 3.0. These store integer
data just like the standard fixed point textures, except they are not
normalized on sampling. They also don't support bilinear filtering, and
require a special sampler ("usampler2D").
While these texture formats enable us to shuffle the data to the GPU,
they're rather impractical with the requirements mentioned above and our
current architecture. One problem is that most code assumes it can
always use bilinear scaling (even if bilinear is never used when using
appropriate scale/cscale options). Another is that we don't have any
concept of running a function on a texture in an uniform way.
So for now, run a simple conversion step through a FBO. The FBO will use
the rgba16f format normally, which gives enough bits for 10 bit, and
will at least gracefully degrade with higher depth input.
This is bound to be much slower than a more "direct" method, but at
least it works and is simple to implement.
The odd change of function call order in init_video() is to properly
disable "dumb mode" (no FBO use) if these texture formats are in use.
This seems generally easier when using libmpv (and was already requested
and implemented before: see commit 327a779a; it was reverted some time
later).
With the weird internal logic we have to deal with, in particular the
--softvol=no case (using system volume), and using the audio API's mixer
(--softvol=auto on some systems), we still can't avoid all glitches and
corner cases that complicate this issue so much. The API user is either
recommended to use --softvol=yes or auto, or to watch the new
mixer-active property, and assume the volume/mute properties have
significant values if the mixer is active.
Remaining glitches:
- changing the volume/mute properties has no effect if no internal mixer
is used (--softvol=no) and the mixer is not active; the actual mixer
controls do not change, only the property values
- --volume/--mute do not have an effect on the volume/mute properties
before mixer initialization (the options strictly are only applied
during mixer init)
- volume-max is 100 while the mixer is not active
Often requested. The main argument, that prominent scalers like sharpen
change the image even if no scaling happens, disappeared anyway.
("sharpen", unsharp masking, is neither prominent nor a scaler anymore.
This is an artifact from MPlayer, which fuses unsharp masking with
bilinear scaling in order to make it single-pass, or so.)
This is probably the 3rd time the user-visible behavior changes. This
time, switch back because not normalizing seems to be the more expected
behavior from users.
Too many problems. Well, actually it's just Linux audio systems which
cause problems, and exclusive audio access on other platforms.
In any case, it seems you have to do some manual configuration if you
want multichannel audio output.
Since the streams are chosen from the full TS by the player frontend,
one should not expect that the program which is shown matches the chosen
channel which was used for tuning to the frequency.
Also, reformulate slightly to simplify reading.
Windows definitely supports Unix-style fd inheritance. This mostly
worked when launched from mpv.exe, though mpv should change the file
mode to O_BINARY. When launched from mpv.com, the wrapper must pass the
list of handles (stored in the undocumented lpReserved2 and cbReserved2
fields) to the mpv process.
It existed for XP-compatibility only. There was also a time where
ao_wasapi caused issues, but we're relatively confident that ao_wasapi
works better or at least as good as ao_dsound on Windows Vista and
later.
Always preroll by default if the cue (index) information indicates
overlapping subtitles.
Increase the amount of maximum data it will skip to get such subtitles
to 10 seconds. Since the index information can reliably tell whether
reading earlier is needed, the maximum should be rarely actually used,
thus we can set it high. On the other hand, the "old" prerolling
mechanism always has to skip the maximum amount of data; thus the method
using the index gets its own option to control the maximum amount of
data to skip.
(As more and more files With newer mkvtoolnix versions are muxed, and
with this new and hopefully sane default established, these options can
probably be removed in the future.)
Requested. It works like --sub-paths. This will also load audio files
from a "audio" sub directory in the config file (because the same code
as for subtitles is used, and it also had such a feature).
Fixes#2632.
The "script-binding" command is used by the Lua scripting wrapper to
register key bindings on the fly. It's also the only way to get fine-
grained information about key events (such as separate key up/down
events). This information is sent via a "key-binding" message when the
state of a key changes.
Extend it to send name of the mapped key itself. Previously, it was
assumed that the user just uses an unique identifier for the binding's
name, so it wasn't needed. With this change, a user can map exactly the
same command to multiple keys, which is useful especially with the next
commit.
Part of #2612.
Add a "blend-tiles" choice to the "alpha" sub-option. This is pretty
simplistic and uses the GL raster position to derive the tiles. A weird
consequence is that using --vo=opengl and --vo=opengl-hq gives different
scaling behavior (screenspace pixel size vs. source video pixel size
16x16 tiles), but it seems we don't have easy access to the original
texture coordinates. Using the rasterpos is probably simpler.
Make this option the default.
Github will display a link to it when a user wants to create an issue or
pull request.
Also make some minor adjustments to DOCS/contribute.md, which is
developer oriented, and for which I see no reason to merge it with
the new file.
This is for the sake of command.c and the "deinterlace" option/property.
Instead of forcing certain "better" defaults when inserting yadif,
change the actual "yadif" defaults.
I pondered not changing vf_yadif, and instead adding a trivial "yadif-
auto" wrapper filter, which would merely have different defaults. But
thinking about it, it doesn't make any sense for "deinterlace" to have
different defaults from vf_yadif, with vf_yadif having the "worse"
defaults. If someone wants the old behavior, the old behavior can be
forced in a backward and forward compatible way by setting the
suboptions.
Fixes#2539 (kind of).
Both mpv and ffmpeg have their own internal pthreads wrappers. The mpv
one has been recently enabled by default as well. (It didn't work on XP,
but we dropped XP support.)
libwaio was added due to the complete inability to cancel synchronous
I/O cleanly using the public Windows API in Windows XP. Even calling
TerminateThread on the thread performing I/O was a bad solution, because
the TerminateThread function in XP would leak the thread's stack.
In Vista and up, however, this is no longer a problem. CancelIoEx can
cancel synchronous I/O running on other threads, allowing the thread to
exit cleanly, so replace libwaio usage with native Vista API functions.
It should be noted that this change also removes the hack added in
8a27025 for preventing a deadlock that only seemed to happen in Windows
XP. KB2009703 says that Vista and up are not affected by this, due to a
change in the implementation of GetFileType, so the hack should not be
needed anymore.
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
WGL_NV_DX_interop is widely supported by Nvidia and AMD drivers. It
allows a texture to be shared between Direct3D and WGL, so that
rendering can be done with WGL and presentation can be done with
Direct3D. This should allow us to work around some persistent WGL
issues, such as dropped frames with some driver/OS combos, drivers that
buffer frames to increase performance at the cost of latency, and the
inability to disable exclusive fullscreen mode when using WGL to render
to a fullscreen window.
The addition of a DX_interop backend might also enable some cool
Direct3D-specific enhancements in the future, such as using the
GetPresentStatistics API to get accurate frame presentation timestamps.
Note that due to a driver bug, this backend is currently broken on
Intel. It will appear to work as long as the window is not resized too
often, but after a few changes of size it will be unable to share the
newly created renderbuffer with GL. See:
https://software.intel.com/en-us/forums/graphics-driver-bug-reporting/topic/562051
This is only for specific Hauppage cards. According to the comments in
who is actively using this feature. Get it out of the way.
Anyone who still wants to use this should complain. Keeping this code
would not cause terribly much additional work, and it could be restored
again. (But not if the request comes months later.)
It turns out that with accurate lookup we can decrease the
default size of texture now. Do it to compensate the performance
loss introduced by the LUT_POS macro.
Sometimes QOpenGLWidget may be redirecting it's output to a framebuffer
object rather than the frontbuffer, in which case the current thread's
context render fbo is different from the widget's. Use the widget's
desired fbo instead.
This adds basic support for ICC profiles. Per-monitor profiles are
supported. WCS profiles are not supported, but there is an API for
converting WCS profiles to ICC, so they might be supported in future.
I'm just not sure if anyone actually uses them.
Reloading the ICC profile when it's changed in the control panel is also
not supported. This might be possible by using the WCS APIs and watching
the registry for changes, but there is no official API for it, and as
far as I can tell, no other Windows programs can do it.
This logic was kind of questionable anyway, and --display-sync should
give much better results. (I would even go as far as saying that the
FPS-dependent framedrop code made things worse in some situations. Not
all, though.)
This is simply the average refresh rate. Including "bad" samples is
actually an advantage, because the property exists only for
informational purposes, and will reflect problems such as the driver
skipping a vsync.
Also export the standard deviation of the vsync frame duration
(normalized to the range 0-1) as vsync-jitter property.
The OSD takes up an entire fullscreen dispmanx layer. Although the GPU
should be able to handle it (possibly even without any disadvantages),
it'll still be useful for debugging performance issues.
Running mpv with default config will now pick up ANGLE by default. Since
some think ANGLE is still not good enough for hq features, extend the
"es" option to reject GLES backends, and add to to the opengl-hq preset.
One consequence is that mpv will by default use libswscale to convert
10 bit video to 8 bit, before it reaches the VO.
I decided that I actually can't stand how vo_opengl unnecessarily puts
the video through 3 shader stages (instead of 1). Thus, what was meant
to be a fallback for weak OpenGL implementations, the dumb-mode, now
becomes default if the user settings allow it.
The code required to check for the settings isn't so wild, so I guess
it's manageable. I still hope that one day, our rendering logic can
generate ideal shader stages for this case too.
Note that in theory, dumb-mode could be reenabled at runtime due to a
color management 3D LUT being set, so a separate dumb_mode field is
required. The dumb-mode option can't just be overwritten.
