This reverts commit cb2b579f61.
This breaks files where the audio starts much later after the video
since mpv reads the first audio packet even if it isn't supposed to
start yet, resulting in the audio_status being STATUS_READY for the
entire time mpv is "waiting" for the first audio packet to be played.
I don't actually deinterlace ever but allegedly this is better than
yadif, and there's no real reason to not have this be the fallback
deinterlace when we're not using hw frames. Also change various mentions
of yadif to bwdif. Ref #12835.
This prevents mp_msg_flush_status_line() from printing an unnecessary
newline when changing file after setting --really-quiet at runtime. If
mpv is backgrounded, this newline garbles the output of TUI programs.
With this change the cursor is not re-enabled after setting
--really-quiet at runtime and quitting with mpv in the foreground, so
enable it on uninit.
If a track's language was guessed from its filename, the commands that
reload the track, like sub-reload, remove it. Fix this by calling
guess_lang_from_filename() again.
Note that backing up t->lang and restoring it if nt->lang is NULL would
work incorrectly when lang is in the stream and it is removed before
reloading.
This displays the current GPU context when --vo=gpu or --vo=gpu-next
is used, which shows the platform and backend information of the vo
which are previously not available.
This exports `current-gpu-context` property, which is the string
description of the current active GPU context. This allows scripts to
uniquely identify the platform and backend used for --vo=gpu
and --vo=gpu-next.
The lingering cache needs to be cleared so the packets don't stay
forever on the screen past their welcome. Do this by simply refreshing
the stream. Fixes#13148.
mp.observe_property('foo', nil, ...) calls the handler at least 2 times
on each playlist change even when the property doesn't change. This is
dangerous because if you haven't read observe_property's documentation
in a long time this is easy to forget, and you can end up using it for
handlers that are computationally expensive or that cause unintended
side effects.
Therefore, this commit discourages its use more explicitly in the
documentation, and replaces its usages in scripts.
For console.lua, observing focused with type nil leads to calling
mp.osd_message('') when changing file while playing in the terminal with
the console disabled. I don't notice issues from this, but it's safer to
avoid it.
For playlist and track-list this doesn't really matter since they
trigger multiple changes on each new file anyway, but changing it can
avoid encouraging people to imitate the code.
One usage of none in stats.lua is kept because according to b9084dfd47
it is a hack to replicate the deprecated tick event.
When the mouse cursor is hovering over the (CSD) windowcontrols title,
the osc keeps displaying, but the cursor autohide isn't disabled like
other visible regions.
Fix this by disabling the cursor autohide in this region.
All other existing behaviors of the mouse cursor in this region
are unchanged, including triggering main window area input
and allowing VO dragging.
Quickly going through a directory with too many loadable files causes the
autoload tasks to pile up and exiting the player will take forever. Avoid
this by skipping loading when playback is aborted.
This adds volume-gain, volume-gain-max, volume-gain-min options, which
can be used to control audio volume and target dynamic range in decibels.
The gain is applied on top of the existing volume setting.
f9cefbfec4 made it so mp_ass_flush_old_events() is continously called on
subtitles with unknown duration, without explaining why, breaking
sub-seek/step -1 with a VO (the issue does not occur when showing
subtitles in the terminal because get_bitmaps() is not called). I don't
experience any issue after removing the call, so delete it to fix these
commands.
After removing that, you can sub-seek -1 once after regular playback,
but not after seeking and thus not multiple times in a row. This is
caused by a714f8e928 which fixed subtitles with unknown duration being
duplicated when seeking with a VO (it does not happen in the terminal)
by clearing old lines on seeks, which broke sub-seek -1 and sub-step -1
in a second way after any seek. The proper fix is to remove the line
ctx->num_seen_packets = 0 for subtitles with unknown duration instead,
which lets decode() return early when a line has already been shown.
Having removed these 2 lines, I also removed sd->preload_ok = false, and
thus the whole conditional, since according to sub/sd.h preload_ok only
needs to be set to false when old subtitles are discarded, and they are
no longer discarded,
The bug can be reproduced with
mpv --sub-file=<(curl 'https://music.xianqiao.wang/neteaseapiv2/lyric?id=1399616170' | jq -r .lrc.lyric) 'https://www.youtube.com/watch?v=dQw4w9WgXcQ'
Negative values are nonsense to mpv, and can cause protocol error afterwards,
like xdg_surface::set_window_geometry which doesn't accept negative values.
Treat any negative values as zero (client determines size) for now.
Needed in case the timer solution fails. Note that this will leave the
mode indicator in the language bar showing the original mode until
a key is pressed.
The IME is useful for text input. Additionally, Alt+Shift input language
switching doesn't work when IME is disabled even when the languages don't
require IME.
Re-add the VK_PROCESSKEY logic to ensure that IME is handled properly.
Reverts bf6b981367.
strlen is only relevant if the length is less than [1, 4], so this can
be replaced with strnlen instead which will only traverse characters
upto the maxlen insted of the entire string length. It also makes MPMIN
unneeded. Also fix a comment.
commit fa9e1f06f tried to move signal unsafe operations out of
signal handlers but mistakenly introduced a race. before,
sigtstop would process the following in order:
0. do_deactivate_getch2();
1. raise(SIGTSTP)
that commit moved 0 out of the signal handler (due to it being
unsafe) but kept 1 in there. this may mess up the ordering of
these operations. this commit moves everything out of the
handler so that things happen in proper order.
since things are now moved out of the handler, SA_RESETHAND is
no longer being applied to SIGTSTP. since that can result in
races if multiple signals are delivered faster than we can
respond to them.
When running the console in the terminal, style log lines with the same
escape sequences as msg.c.
mp.input can also specify terminal escape sequences, e.g. a script to
select a playlist entry can invert the color of the selection.
Also add a missing newline to help's error message.
This can cause mpv to abruptly quit without following the proper uninit
process when a second `SIGTERM` or `SIGQUIT` is sent and mpv
didn't quit on the first one already. This is because the default action
for these signals is to terminate the program immediately, similar to
`SIGKILL`, and `SA_RESETHAND` resets the `quit_request_sighandler` to
`SIG_DFL` for the default action.
Also keep the `SA_RESETHAND` flag for SIGINT because the current
behavior is to quit after receiving two Ctrl+C no matter what, this is
probably convenient and worth keeping.
This change is because some tools (e.g. GNU timeout) send SIGTERM twice
after the timeout period.
An easy way to reproduce is with `timeout 1 mpv [...]` where mpv would
quit abruptly anywhere from half the time to once every 50 attempts
depending on your luck.
According to the xkbcommon docs, `xkb_state_mod_index_is_consumed` is
true when a modifier *may affect* key translation. A key modifier may
be consumed but not be active. See xkb documentation for this function
for further details. This breaks key modifiers in cases where
L_Shift+R_Shift for example is used to change keyboard layout with
`xkb_options grp:shifts_toggle`. Instead, replace it with a simple
check for a valid modifier.
This doesn't actually work on either Windows or Linux with --terminal.
With --no-terminal or --no-input-terminal the SIGTERM handler is never
registered, so it definitely can't work.
Just remove the note about signals because it would be complicated to
explain that they don't terminate abruptly only with --terminal and only
if that signal has a handler, and it wouldn't be of interest to most
users.
fe875083b3 confused things a bit and made
--no-subs-with-matching-audio actually mean what it says: no subtitles
if the languages match. However, the option actually meant no non-forced
subtitles not no subtitles at all. This isn't really intuitive so
instead of changing the behavior back to the old way (we already have a
release since then), add a third option "forced" which is equivalent to
the old meaning of --no-subs-with-matching audio. Fixes#13151.
