openwrt

OpenWRT branches i work with

Go to file

Gabor Juhos 1374e5a721 ar71xx: rb91x: fix ethernet packet loss issues The RB91x boards are suffering from ethernet packet loss after a cold boot. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40509		2014-04-13 20:41:52 +00:00
config	sparse: add as a new package selectable from the config	2014-04-12 21:21:49 +00:00
docs
include	sparse: add as a new package selectable from the config	2014-04-12 21:21:49 +00:00
package	iw: sync nl80211.h (fixes settting antenna_gain)	2014-04-13 09:53:51 +00:00
scripts	scripts/metadata.pl: fix ignoring missing host dependencies	2014-03-13 14:14:06 +00:00
target	ar71xx: rb91x: fix ethernet packet loss issues	2014-04-13 20:41:52 +00:00
toolchain	uClibc: backport mount.h update	2014-03-24 00:19:33 +00:00
tools	sparse: add as a new package selectable from the config	2014-04-12 21:21:49 +00:00
.gitattributes
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds.conf.default: fix copy&paste mistake (#15383 )	2014-03-26 19:26:32 +00:00
LICENSE
Makefile	build: remove duplicate variable definitions	2014-03-21 15:54:11 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
rules.mk	partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk"	2014-03-22 19:52:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org