caskd/openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ar71xx: rb91x: fix ethernet packet loss issues

Browse Source 
The RB91x boards are suffering from ethernet packet loss after a cold
boot. The cause of the problem is that the AR8035 PHYs requires special
register settings to work reliably on these boards.

Enable the RGMII TX, RX delays and disable SmartEE functionality of
the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register
to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40509
This commit is contained in:
Gabor Juhos 2014-04-13 20:41:52 +00:00
parent 46a8af4c47
commit 1374e5a721
1 changed files with 19 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
View File

@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-latch.h>
#include <linux/platform_data/rb91x_nand.h>
#include <linux/platform_data/phy-at803x.h>
#include <asm/prom.h>
#include <asm/mach-ath79/ath79.h>
@ -223,6 +224,20 @@ static struct gpio_led rb711gr100_leds[] __initdata = {
},
};
static struct at803x_platform_data rb91x_at803x_data = {
.disable_smarteee = 1,
.enable_rgmii_rx_delay = 1,
.enable_rgmii_tx_delay = 1,
};
static struct mdio_board_info rb91x_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &rb91x_at803x_data,
},
};
static void __init rb711gr100_init_partitions(const struct rb_info *info)
{
rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
@ -293,10 +308,14 @@ static void __init rb711gr100_setup(void)
ARRAY_SIZE(rb711gr100_spi_info));
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
AR934X_ETH_CFG_RXD_DELAY |
AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(0, 0x0);
mdiobus_register_board_info(rb91x_mdio0_info,
ARRAY_SIZE(rb91x_mdio0_info));
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);