John Crispin
2eeec387f8
Update bridge-utils to the last upstream version 1.5.
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 30536
2012-02-14 19:07:09 +00:00
John Crispin
58b26b60d3
update e2fsprogs
...
Update e2fsprogs to the last upstream version 1.42.
blkid works fine without 100_add_missing_libpthread_for_blkid.patch.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 30535
2012-02-14 19:07:07 +00:00
John Crispin
7416a5f0aa
fix compile error in previous commit
...
SVN-Revision: 30534
2012-02-14 19:07:05 +00:00
John Crispin
cd1a204365
Support booting the Speedport W502V using BRN-BOOT.
...
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1 .
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
John Crispin
17e1717033
drop obselete Config.in file
...
SVN-Revision: 30531
2012-02-14 17:48:01 +00:00
Gabor Juhos
02a01a16c7
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
...
SVN-Revision: 30529
2012-02-14 17:32:45 +00:00
Gabor Juhos
43d1a2c3ab
ramips: rt3883: enable PCI on the RT-N56U board
...
SVN-Revision: 30528
2012-02-14 17:32:44 +00:00
Gabor Juhos
784be92e39
ramips: rt3883: add PCI support
...
SVN-Revision: 30527
2012-02-14 17:32:42 +00:00
Gabor Juhos
10f00dc48b
ramips: rt3883: sync 2.6.39 config
...
SVN-Revision: 30526
2012-02-14 17:32:41 +00:00
Gabor Juhos
ed79921fe5
ramips: use SoC specific irq.h
...
SVN-Revision: 30525
2012-02-14 17:32:40 +00:00
John Crispin
0b07769898
fixes irq locking in ethernet driver
...
SVN-Revision: 30522
2012-02-14 15:05:58 +00:00
John Crispin
55bf39e98c
fixes gpio_export patch
...
SVN-Revision: 30521
2012-02-14 15:05:57 +00:00
John Crispin
b0a11ba9fe
bump to 1.12, merge improved lantiq aud_dev driver
...
SVN-Revision: 30520
2012-02-14 15:05:55 +00:00
John Crispin
d82c9a1b15
add a simple sip client
...
SVN-Revision: 30519
2012-02-14 15:05:52 +00:00
John Crispin
976d3eb854
add annex selection support to ltq_dsl package
...
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
Gabor Juhos
9a0e17857e
ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
...
SVN-Revision: 30508
2012-02-13 17:11:58 +00:00
Gabor Juhos
1c57a22aae
ar71xx: add model detection for TL-WR842N/ND
...
SVN-Revision: 30507
2012-02-13 17:11:57 +00:00
Hamish Guthrie
92d36617b6
hostapd: correctly pass 64 char hex PSK to wpa_supplicant
...
SVN-Revision: 30504
2012-02-13 16:07:53 +00:00
Florian Fainelli
e16916480d
update to 3.2
...
SVN-Revision: 30503
2012-02-13 16:05:30 +00:00
Florian Fainelli
7bed2e2225
fix titan gpio register size
...
SVN-Revision: 30502
2012-02-13 16:05:27 +00:00
Felix Fietkau
904ecc2159
block-mount: do not auto-mount anonymous mtdblock devices ( fixes #10960 , #10850 )
...
SVN-Revision: 30501
2012-02-13 15:31:31 +00:00
Felix Fietkau
9cf5926eff
quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure
...
SVN-Revision: 30500
2012-02-13 15:31:28 +00:00
Gabor Juhos
8d5dfa75e6
ramips: rt3883: update package list in the default profile
...
SVN-Revision: 30499
2012-02-13 15:18:05 +00:00
Gabor Juhos
99c019fb0d
ramips: add preliminary support for the Asus RT-N56U board
...
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
Gabor Juhos
97e641a0e6
ramips: raeth: enable MDIO code for RT3883
...
SVN-Revision: 30497
2012-02-13 15:18:03 +00:00
Gabor Juhos
32247d3d21
package/modules: enable ECHI/OHCI for RT3883
...
SVN-Revision: 30496
2012-02-13 15:18:01 +00:00
Gabor Juhos
e532fa5fd4
ramips: add preliminary support for the RT3662/RT3883 SoCs
...
SVN-Revision: 30495
2012-02-13 15:17:59 +00:00
Florian Fainelli
3bfbc69bc2
kexec-tools: update to 2.0.3 ( fixes #9846 )
...
SVN-Revision: 30493
2012-02-13 12:36:36 +00:00
Florian Fainelli
4a0dc3a32a
add support for 3.2
...
SVN-Revision: 30492
2012-02-13 12:36:34 +00:00
Hauke Mehrtens
30408f1cc4
brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
...
SVN-Revision: 30488
2012-02-12 22:41:20 +00:00
Hauke Mehrtens
e7bd7f7e85
brcm47xx: activate config bug to show warnings
...
SVN-Revision: 30487
2012-02-12 22:40:01 +00:00
Felix Fietkau
dcfc40358b
gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary
...
SVN-Revision: 30486
2012-02-12 20:25:47 +00:00
Felix Fietkau
bc63786fbb
swconfig: fix off-by-one error, causing segfaults on gcc 4.6+ ( fixes #9765 )
...
SVN-Revision: 30485
2012-02-12 19:27:01 +00:00
Felix Fietkau
9f551028d2
package/grub: fix stage2 link with recent binutils
...
We want the `_start's symbols to be at the very beginning of the `stage2'
binary's `.text' section. However, nothing enforces this requirement. With
recent binutils (ie. post 2.19.1), this results in a corrupt binary, as ld(1)
puts another symbol (eg. `journal_init') at the beginning of the section.
Fix this by providing a stripped down version of the default linker script
where we enforces the position of `_start' in the `.text' section.
Patch by Arnaud Lacombe (#10444 )
SVN-Revision: 30484
2012-02-12 18:40:18 +00:00
Gabor Juhos
22ec8b4839
ramips: use GENERIC_{4,8}M image template for WR5123GN
...
SVN-Revision: 30483
2012-02-12 18:04:47 +00:00
Gabor Juhos
b7f129e19b
ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
...
SVN-Revision: 30482
2012-02-12 18:04:46 +00:00
Hauke Mehrtens
fa21aef5ab
brcm47xx: refresh patches
...
SVN-Revision: 30481
2012-02-12 16:45:27 +00:00
Hauke Mehrtens
838c363886
brcm47xx: update usb driver for brcm47xx.
...
SVN-Revision: 30480
2012-02-12 16:38:10 +00:00
Felix Fietkau
c2e411fa8d
tools/genext2fs: do not include the host getline.h, it breaks the tool in subtle ways, and the source already has a getline replacement
...
SVN-Revision: 30479
2012-02-12 16:12:08 +00:00
Felix Fietkau
07488ef93d
glibc: remove all previous (ancient) versions, add 2.14 (partially based on a patch and testing by WillieNL)
...
SVN-Revision: 30478
2012-02-12 16:12:01 +00:00
Felix Fietkau
fd74a50df7
broadcom-diag: fix WRT150N/WRT160N detection (patch from #10836 )
...
SVN-Revision: 30477
2012-02-12 15:43:14 +00:00
Gabor Juhos
a287c60a61
ramips: add initial support for 3.2
...
SVN-Revision: 30476
2012-02-12 12:52:14 +00:00
Gabor Juhos
388013b0ce
ramips: include 'linux/module.h' in the ramips_spi driver
...
SVN-Revision: 30475
2012-02-12 12:52:13 +00:00
Gabor Juhos
faae4235c4
ramips: rt288x: remove per-board physmap_flash_data instances
...
SVN-Revision: 30474
2012-02-12 12:52:12 +00:00
Gabor Juhos
3502e2b93f
ramips: rt305x: remove per-board physmap_flash_data instances
...
SVN-Revision: 30473
2012-02-12 12:52:10 +00:00
Imre Kaloz
143e861708
enable another l2 cache errate on newer kernels
...
SVN-Revision: 30472
2012-02-12 11:22:08 +00:00
Imre Kaloz
3c365cc72d
enable 2.22 for unsupported archs if BROKEN is enabled
...
SVN-Revision: 30471
2012-02-12 09:56:47 +00:00
Imre Kaloz
d252dd3d2e
upgrade vanilla gcc to 4.6.2
...
SVN-Revision: 30470
2012-02-12 09:48:39 +00:00
Imre Kaloz
bd73e0a85d
use binutils 2.22 by default
...
SVN-Revision: 30469
2012-02-12 09:17:54 +00:00
Imre Kaloz
86296a0cb6
use uClibc 0.9.33 by default
...
SVN-Revision: 30468
2012-02-12 09:15:29 +00:00
