On older versions of gcc, an error is incorrectly given about
uninitialized variables. This will initialize the culprits.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
Fixes https://github.com/SELinuxProject/cil/issues/7.
This fixes a bug where cil_verify_classperms was executed on NULL
classperms lists. A check is now performed when verifying
classpermissions and classmap to ensure the classperms lists are not
empty.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
This adds a userattribute statement that may be used in userroles and
constraints. The syntax is the same as typeattributset.
Also, disallow roleattributes where roles are accepted in contexts.
Specify a userattribute
(userattribute foo)
Add users to the set foo
(userattributeset foo (u1 u2))
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
When we copy a blockinherit statement, we perform actions that assume
the blockinherit statement was already resolved. However, this isn't the
case if the statement was copied from a tunableif or an in-statement,
since those are resolve before blockinherits and blocks. So when
copying a blockinherit that hasn't been resolved, ignore the code that
associates blocks with the blockinherit; that will all be handled when
the copied blockinherit is actually resolved later.
Additionally, restrict block, blockabstract, and blockinherit statements
from appearing in macros. These statements are all resolved before
macros due to ordering issues, so they must not appear inside macros.
Note that in addition to doing the checks in build_ast, they are also
done in resolve_ast. This is because an in-statement could copy a block
statement into a macro, which we would not know about until after the
in-statement was resolved.
Signed-off-by: Steve Lawrence <slawrence@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
When copying classpermission or classpermissionset statements, we did
not properly initialize the new structs. This would cause a segfault
when one used either of these statements inside a tunableif block, e.g.
(tunableif foo
(true
(classpermissionset cps (cls (perm1 perm2))))
(false
(classpermissionset cps (cls (perm1)))))
Reported-by: Dominick Grift <dac.override@gmail.com>
Signed-off-by: Steve Lawrence <slawrence@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
users_extra is needed by genhomedircon and when listing seusers, so it
must be kept in the policy store. Also move the FC_TMPL unlink() closer
to where the FC_TMPL is created; not a functional change, but eaiser to
follow.
Signed-off-by: Steve Lawrence <slawrence@tresys.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
We don't currently store homedir_template in the policy store, which
means genhomedircon only has a template file to use if the
homedir_template was generated from the file contexts in the same
transaction. But homedir_template isn't always generated, as in the
case with setsebool -P. In this and other cases, genhomedircon will not
have a template file resulting in an empty file_contexts.homedir file.
This commit changes this so that homedir_template is always stored in
the policy store so it can be used by genhomedircon regardless of how
policy was built. Also add the homedir_template file to the migration
script.
Signed-off by: Steve Lawrence <slawrence@tresys.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Also removes *bounds statements in policy.cil, which had bounds
violations and are better tested in other test files.
Signed-off-by: Steve Lawrence <slawrence@tresys.com>
Acked-by: James Carter <jwcart2@tycho.nsa.gov>
Add three new extended avrule statements with the following syntax:
(allowx source_type target_type permissionx)
(auditallowx source_type target_type permissionx)
(dontauditx source_type target_type permissionx)
source_type - type, typeattribute, or typealias
target_type - type, typeattribute, typealias, or "self" keyword
permissionx - named or anonymous permissionx statement, which has the syntax:
(permissionx name (kind object expression))
name - unique identifier of the permissionx statement
kind - must be "ioctl"; could be extended in the future
object - class or classmap
expression - standard CIL expression containing hexadecimal values,
prefixed with '0x', and the expression keywords 'or', 'xor', 'and',
'not', 'range', or 'all'. Values must be between 0x0000 and 0xFFFF.
Values may also be provided in decimal, or in octal if starting with '0'.
For example:
(allowx src_t tgt_t (ioctl cls (0x1111 0x1222 0x1333)))
(allowx src_t tgt_t (ioctl cls (range 0x1400 0x14FF)))
(allowx src_t tgt_t (ioctl cls (and (range 0x1600 0x19FF) (not (range 0x1750 0x175F)))))
(permissionx ioctl_nodebug (ioctl cls (not (range 0x2010 0x2013))))
(allowx src_t tgt_t ioctl_nodebug)
Signed-off-by: Steve Lawrence <slawrence@tresys.com>
Acked-by: James Carter <jwcart2@tycho.nsa.gov>
When a user has invalid locales set, audit2allow and audit2why fail with
a traceback. This could be safely ignored as it will stay with 'C'
locale.
Fixes:
Traceback (most recent call last):
File "policycoreutils/audit2allow/audit2allow", line 35, in <module>
locale.setlocale(locale.LC_ALL, '')
File "/usr/lib64/python2.7/locale.py", line 579, in setlocale
return _setlocale(category, locale)
locale.Error: unsupported locale setting
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
The selinux.py is generated at compile-time and will be installed as
python module "selinux/__init__.py", just make sure that it has been
generated completely while starting "make install-pywrap".
This fixes below errors that caused by an empty "selinux/__init__.py":
$ /usr/sbin/semanage -h
Traceback (most recent call last):
File "/usr/sbin/semanage", line 30, in <module>
import seobject
File "/usr/lib64/python2.7/site-packages/seobject.py", line 27, in <module>
import sepolicy
File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 226, in <module>
def get_file_equiv_modified(fc_path = selinux.selinux_file_context_path()):
AttributeError: 'module' object has no attribute 'selinux_file_context_path'
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Add -p option that will take a binary policy file to validate
context entries in the text file_contexts file.
Should validation fail the binary file will not be written.
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
file_contexts can be legitimately empty, particularly when dealing with
a file_contexts.local file. The change to test for file_contexts.bin
format by magic number was treating an EOF condition as a fatal error,
thereby causing an error on empty file_contexts.local files. Only
treat it as an error if there was truly an error on the read, as
checked via ferror(). Otherwise, clear the error and EOF indicators
so that they do not persist when we rewind the file and try to read
it as text.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Fail hard on any error during property_contexts (or service_contexts)
processing. We want to catch any such errors early and not proceed
with a potentially mislabeled system.
Also remove some obsoleted tests for NULL; they were necessary
in earlier versions of the code where we were copying the strings
at this point, but no longer.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Fail hard on any error during file_contexts processing.
We want to catch any such errors early and not proceed
with a potentially mislabeled system. This was the original
logic but was loosened long ago to more gracefully handle
user error in Linux distributions (a single typo could lead
to not being able to label anything, even if the relevant
entry for the files in question was correct). However,
in Android, file_contexts is not modified at runtime and
we want to fully validate it at build, so we want to fail
hard in these cases, and in modern Linux, file_contexts is
modified using tools (semanage, semodule) and a library
(libsemanage) that should already be fully validating values
before adding entries, and that trigger a setfiles -c validation
(equivalent to Android checkfc) before committing the transaction.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
If file_contexts.bin was opened with SELABEL_OPT_VALIDATE set, then
we should validate contexts in the same manner as with file_contexts.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Check to see if the file whose path is passed to selabel_open() starts
with the file_contexts.bin magic number, and if so, automatically
treat it as a file_contexts.bin file. This allows one to open
file_contexts.bin formatted files without necessarily having a .bin
file suffix. This removes the need for the previously added
.bin file suffix test.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Add a selabel_cmp() interface for comparing two label configurations,
and implement it for the file backend (i.e. for file_contexts). This
allows comparing two file_contexts configurations to see if the first
is a subset of, equal/identical to, a superset of, or incomparable to
the second. The motivating use case is to allow comparing two
file_contexts.bin files in Android CTS to confirm that a device
file_contexts.bin file contains all of the entries in the AOSP
general file_contexts.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Add --extract/-E, --cil/-c, and --hll/-H to extract modules. If -c/-H
are not provided, the module will be output as HLL by default. Only
--cil or --hll (which will use the lang_ext in the semodule store) are valid
options to use with -E. The module is written to the current working directory
as <module_name>.<lang_ext>.
If a module exists as HLL and is exported as CIL, it will first compile into
CIL and cache to the module store. Once compiled, exporting will
continue.
If no priority is provided when extracting a module, then extraction at
the default priority, 400, will be attempted. If the module does not
exist at the default priority, then it will be exported at the highest
existing priority.
Examples:
Extract the wireshark module in a .cil format. If the module only exists
as HLL on the system, the module will be compiled into CIL and placed
into the module store. This command will then write wireshark.cil to the CWD.
semodule --cil --extract wireshark
Extract the wireshark module in HLL format. Since the original HLL file
was a policy package, a wireshark.pp will be written to the CWD.
semodule -E wireshark
Extract the wireshark module as CIL and HLL and extract the puppet
module as CIL at priority 400.
semodule --hll -E wireshark --cil -E wireshark -X 400 --cil -E puppet
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
If modkey is NULL, semanage_module_key_destroy() would still try to
initialize a modkey after freeing it.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
Add semanage_module_extract() to extract a module as CIL or HLL. The
function takes a module name and whether to extract as CIL or HLL.
If a CIL file is requested, but does not exist, semanage_module_extract()
will compile the HLL to CIL and cache the CIL in the store as well as
extract the module. A module that was installed from a CIL file will export
as CIL when the HLL version of the file is requested.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
In python3 it is needed to pass compare function as a key argument
instead of directly passing compare function to sort function
Signed-off-by: Robert Kuska <rkuska@redhat.com>
In Python3 output from Popen communicate function
returns bytes, to handle output as a string it is needed
to properly decode it.
Signed-off-by: Robert Kuska <rkuska@redhat.com>
At present, the label_file backend expects to be provided the path
to the text file_contexts file and always appends the .bin suffix
when checking for the binary file_contexts.bin file. If one
attempts to directly specify the path to a file_contexts.bin file
to selabel_open(), it will fail as the code will append a second
.bin suffix to it. Check to see if the file path already has a .bin
suffix and do not append it in that case.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Change the label_file backend in libselinux to support systems
that only have file_contexts.bin files installed and do not ship
a file_contexts file at all. Only fail if neither file can be
loaded.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Some platforms do not have %ms support in sscanf. This adds a tokenize()
function to be used instead of sscanf. tokenize() has the ability to split on any
delimiter. All whitespace delimiters will be squashed.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Constraint rules in output need to be commented in order to make a policy
compilable.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1155974
Patch-by: Miroslav Grepl <mgrepl@redhat.com>
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
checkpolicy was directly assigning type sets rather than using
type_set_cpy() and therefore creating pointer aliases to the
same type set from multiple filename-based type transition rules
if they specified multiple classes. This would then yield a double
free when destroying the rules afterward and a segmentation fault.
Fix it to use type_set_cpy().
Reported-by: William C Roberts <william.c.roberts@intel.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
When trying to get policycoreutils working in python3, I kept running
into TabErrors:
Traceback (most recent call last):
File "/usr/lib/python-exec/python3.3/semanage", line 27, in <module>
import seobject
File "/usr/lib64/python3.3/site-packages/seobject.py", line 154
context = "%s%s" % (filler, raw)
^
TabError: inconsistent use of tabs and spaces in indentation
Python3 is a lot stricter than python2 regarding whitespace and looks like
previous commits mixed the two. When fixing this, I took the chance to fix
other PEP8 style issues at the same time.
This commit was made using:
$ file $(find . -type f) | grep -i python | sed 's/:.*$//' > pyfiles
$ autopep8 --in-place --ignore=E501,E265 $(cat pyfiles)
The ignore E501 is long lines since there are many that would be wrapped
otherwise, and E265 is block comments that start with ## instead of just #.
Signed-off-by: Jason Zaman <jason@perfinion.com>
