openwrt/package/boot
Glen Lee 3aef61060e
ipq806x: add support for Extreme Networks AP3935
Extreme Networks AP3935i/e -
https://www.extremenetworks.com/support/documentation/access-points-ap3935i-e/

SoC: IPQ8068 QYY AT46279K45060I
RAM: NANYA 1527 NT5CC256M16DP-DI 515073W0EF 7 TW
FLASH: NOR - S25FL256S1 - 32MB
       NAND - Macronix MX30UF4G28AB - 512MB
LAN: Atheros AR8035-A J5150WL 1515 CN - RGMII
LAN2: Atheros AR8033-AL1A SKCSR.AJ1 1444 China - SGMII
WLAN2: QCA9990 OVV FNPV209 K451406
WLAN5: QCA9990 OVV FNPV209 K451406
SERIAL: RS232 Port (115200 8n1) Cisco console cable and
        4pin Serial Header | 3.3 | GND | RX | TX

MAC address for LAN1/LAN2/WLAN 2G/WLAN 5G in uboot env

 * Installation via either RJ45 console or on-board 4 PIN header

Install Method
--------------
1) Setup TFTP server, and place
     openwrt-ipq806x-generic-extreme_ap3935-initramfs-uImage image
     in /srv/tftp or similar
2) Connect to console on router and connect ethernet port "LAN1" to
     your LAN
3) Interupt the boot with any character
4) Login with admin/new2day for default password
     (use reset/FactoryDefault if password needs to be reset)
5) Set serverip to TFTP IP: set serverip 192.168.1.2
6) Set ipaddr to another IP: set ipaddr 192.168.1.101
7) Make uboot ping something to activate eth0 on boot:
     set bootcmd 'ping 192.168.1.1; run boot_flash'
     saveenv
8) TFTP image to RAM:
     tftpboot 0x42000000
openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage
9) Boot image: bootm 0x42000000
     In OpenWRT, "LAN1" is LAN, "LAN2" is WAN
10) SFTP openwrt-ipq806x-generic-extreme_ap3935-squashfs-nand-sysupgrade.bin
     image to /tmp
11) sysupgrade /tmp/openwrt-*-nand-sysupgrade.bin

Signed-off-by: Glen Lee <g2lee@yahoo.com>
2023-10-05 00:56:57 +02:00
..
arm-trusted-firmware-bcm63xx
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: fix copy&paste error in Makefile 2023-09-21 10:15:08 +01:00
arm-trusted-firmware-mvebu arm-trusted-firmware-mvebu: bump to v2.9 2023-08-26 00:11:48 +02:00
arm-trusted-firmware-rockchip arm-trusted-firmware-rockchip: add m0 gcc toolchain 2023-06-25 22:52:15 +02:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: update to version 2.9 2023-09-24 17:12:24 +02:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: fix build on macOS/Darwin 2023-08-12 16:45:47 +02:00
at91bootstrap treewide: Add extra CPE identifier 2023-09-25 23:06:33 +02:00
fconfig
grub2 grub2: opt-out of gc-sections usage 2023-07-14 23:56:58 +02:00
imx-bootlets
kexec-tools
kobs-ng
mt7623n-preloader
opensbi
tfa-layerscape
uboot-armsr uboot-armsr: add support for QEMU armv7/armv8 2023-06-10 21:50:22 +02:00
uboot-at91
uboot-bcm53xx uboot-bcm53xx: Add U-Boot for NorthStar BCM53xx 2023-08-20 18:08:13 +02:00
uboot-bcm4908
uboot-envtools ipq806x: add support for Extreme Networks AP3935 2023-10-05 00:56:57 +02:00
uboot-fritz4040
uboot-imx
uboot-kirkwood
uboot-lantiq
uboot-layerscape
uboot-mediatek filogic: add support for GL.iNet GL-MT6000 2023-09-29 00:18:26 +01:00
uboot-mvebu uboot-mvebu: eDPU: add support for version with external switch 2023-09-19 12:12:17 +02:00
uboot-mxs mxs: rework image generation 2023-06-30 19:24:52 +02:00
uboot-omap
uboot-oxnas
uboot-rockchip uboot-rockchip: add suport for Radxa ROCK Pi E 2023-09-05 00:20:51 +05:30
uboot-sifiveu
uboot-sunxi sunxi: add support for Bananapi P2 Zero 2023-09-18 18:15:21 +02:00
uboot-tegra
uboot-zynq