RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-27 00:52:36 +00:00
Code Issues Packages Projects Releases Wiki Activity
60,021 Commits 3 Branches 76 Tags 239 MiB
163c87dfc2
Commit Graph

60021 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Felix Fietkau
163c87dfc2 mac80211: fix another regression in the broadcast AQL patch 
Add a separate bit in struct ieee80211_tx_info to indicate airtime tracked
as broadcast/multicast. This avoids a race condition where airtime from
stations that were just removed wasn't getting subtracted from the total
PHY airtime.

Fixes: 95e633efbd ("mac80211: add AQL support for broadcast/multicast packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2024-03-15 20:37:21 +01:00
Daniel Golle
6da3c9ddbc generic: 6.6: backport support for SDX75-based MHI 5G modems 
Also backport most recent MHI modem additions to Linux 6.6.
Adds support for generic SDX75-based modems.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-15 18:30:31 +00:00
Daniel Golle
e4a4c91d8b generic: 6.1: backport support for various MHI 5G modems 
* Dell DW5932e
  * Foxconn T99W175 (HP variant)
  * Foxconn T99W510
  * Generic SDX75-based
  * Quectel EM160R-GL (newer variants)
  * Quectel RM520
  * Quectel RM520N-GL (Lenovo variant)
  * SC8280XP Compute Reference Design
  * Telit FE990

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-15 17:48:02 +00:00
Robert Marko
8fb23465ca kernel: modules: video: select drm-exec and drm-suballoc-helper for AMDGPU 
drm-amdgpu and drm-radeon require drm-exec and/or drm-suballoc-helper in
6.6, so since we have them packaged separately include them when required.

Fixes: 5b08b56007 ("kernel: modules: video: adapt for kernel 6.6")
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-15 15:25:03 +01:00
Robert Marko
08f1c36d00 kernel: modules: video: package DRM suballocation helper 
Linux 6.4 has split out the previously AMDGPU specific suballocation
helper into a generic one and it has its own symbol now.

So, lets package it as a separate helper as AMDGPU still requires it
for 6.6.

Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-15 15:25:03 +01:00
Robert Marko
a6b3cc95f2 kernel: modules: video: package DRM EXEC 
Linux 6.6 has added DRM EXEC as a separate symbol, so package it separately
as AMDGPU requires it.

Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-15 15:25:03 +01:00
Robert Marko
5c7400e932 kernel: modules: video: drm: remove DRM_EXEC and DRM_SUBALLOC_HELPER 
As part of adding kernel 6.6 support, DRM_EXEC and DRM_SUBALLOC_HELPER were
added to the kmod-drm, however these are only used by drm-amdgpu and
drm-radeon which are only supported on x86.

So, lets start fixing building of other targets by removing these from the
main kmod-drm, in follow-up commits they will be packaged separately and
selected when required.

Fixes: 5b08b56007 ("kernel: modules: video: adapt for kernel 6.6")
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-15 15:25:03 +01:00
Robert Marko
af7d5a40a9 ath11k-firmware: update IPQ8074 and QCN9074 to 2.9.0.1-01977 
After a long time QCA has pushed an updated release of 2.9.0.1 firmware
for IPQ8074 and QCN9074, so lets update to 2.9.0.1-01977.

Sadly, still nothing new for IPQ6018.

Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-15 15:22:53 +01:00
Daniel Golle
2b25f66d0a mediatek: mt7988: add missing clock for PCIe ports 
Add missing CLK_TOP_PEXTP_Px_SEL clock for each of the 4 PCIe interfaces
of the MT7988 SoC. Without that clock PCIe doesn't work reliable.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-15 14:09:11 +00:00
Mantas Pucka
904aa43865 qualcommax: ipq60xx: mango-dvk: fix QCA8081 reset timings 
Add missing reset delay properties for QCA8081 PHY.
Without delays PHY operation is unreliable.

Signed-off-by: Mantas Pucka <mantas@8devices.com>
 2024-03-15 09:13:46 +02:00
Hauke Mehrtens
e40471e923 kernel: Activate CONFIG_NET_VENDOR_DAVICOM 
CONFIG_NET_VENDOR_DAVICOM is needed to activate the CONFIG_DM9000 option
which builds the kmod-dm9000. This fixes the following warning:
logs/package/kernel/linux/compile.txt:WARNING: kmod-dm9000 is not available in the kernel config - generating empty package

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-03-14 20:56:18 +01:00
Hauke Mehrtens
d2898c273d kernel: kmod-hwmon-coretemp: Depend on x86 
This kernel module depends on x86, it works only on some Intel CPUs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-03-14 20:56:18 +01:00
Hauke Mehrtens
9c6cf8e77c kernel: kmod-video-cpia2: Depend on kernel 5.15 
This driver was moved to staging in kernel 6.1 and then removed in
kernel 6.3, see these commits:
https://git.kernel.org/linus/be8cebc46d9d38166a1b3fda22a018ae52b0928e
https://git.kernel.org/linus/9ea8a9c72a9b4d24e6045ee25f5e465dc22f9f55

Build it only on older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-03-14 20:56:18 +01:00
Hauke Mehrtens
fcf0453549 kernel: kmod-can: Fix build of can drivers 
Many can kernel modules are now gated by the newly introduced
CONFIG_CAN_NETLINK configuration option. Activate it to build the can
drivers again.
This was changed in this upstream Linux commit:
https://git.kernel.org/linus/df6ad5dd838e0fa543ca28ca6154901fa65a9443

This should fix these warnings with kernel 6.1 and 6.6:
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can-pci is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can-platform is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-mcp251x is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-slcan is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-8dev is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-ems is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-kvaser is not available in the kernel config - generating empty package
logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-peak is not available in the kernel config - generating empty package

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-03-14 20:56:11 +01:00
Hauke Mehrtens
d249635c5b kernel: kmod-can-flexcan: Fix flexcan.ko location 
The flexcan.ko file was moved in upstream Linux:
https://git.kernel.org/linus/bfd00e021cf162049946a9e0047b0997d2b35fec
This fixes the build with kernel >= 5.17. This module was never build
with kernel 6.1 before.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-03-14 20:53:34 +01:00
Hauke Mehrtens
712cda1351 kernel: kmod-can-slcan: Fix can-slcan.ko location 
The slcan.ko file was moved in upstream Linux:
https://git.kernel.org/linus/98b12064591d635db86da4957b547067dc6897cc
This fixes the build with kernel >= 6.0. This module was never build
with kernel 6.1 before.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-03-14 20:53:34 +01:00
Hauke Mehrtens
c00fbba57c kernel: kmod-crypto-gf128: Fix build with kernel 6.6 
The gf128mul.ko module was moved in kernel 6.2:
https://git.kernel.org/linus/61c581a46a9668747d355436bd4b2505594539bd

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-03-14 20:53:34 +01:00
Hauke Mehrtens
091897fad2 kernel: kmod-crypto-user: Add missing dependency 
The algif_rng.ko kernel module depends on the rng.ko kernel module with
kernel 6.6 when compiling for MIPS malta.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-03-14 20:53:34 +01:00
Christian Lamparter
7b911a9c49 firmware: intel-microcode: update to 20240312 
Debian changelog:

intel-microcode (3.20240312.1) unstable; urgency=medium

  * New upstream microcode datafile 20240312 (closes: #1066108)
    - Mitigations for INTEL-SA-INTEL-SA-00972 (CVE-2023-39368):
      Protection mechanism failure of bus lock regulator for some Intel
      Processors may allow an unauthenticated user to potentially enable
      denial of service via network access.
    - Mitigations for INTEL-SA-INTEL-SA-00982 (CVE-2023-38575):
      Non-transparent sharing of return predictor targets between contexts in
      some Intel Processors may allow an authorized user to potentially
      enable information disclosure via local access.  Affects SGX as well.
    - Mitigations for INTEL-SA-INTEL-SA-00898 (CVE-2023-28746), aka RFDS:
      Information exposure through microarchitectural state after transient
      execution from some register files for some Intel Atom Processors and
      E-cores of Intel Core Processors may allow an authenticated user to
      potentially enable information disclosure via local access.  Enhances
      VERW instruction to clear stale register buffers.  Affects SGX as well.
      Requires kernel update to be effective.
    - Mitigations for INTEL-SA-INTEL-SA-00960 (CVE-2023-22655), aka TECRA:
      Protection mechanism failure in some 3rd and 4th Generation Intel Xeon
      Processors when using Intel SGX or Intel TDX may allow a privileged
      user to potentially enable escalation of privilege via local access.
      NOTE: effective only when loaded by firmware.  Allows SMM firmware to
      attack SGX/TDX.
    - Mitigations for INTEL-SA-INTEL-SA-01045 (CVE-2023-43490):
      Incorrect calculation in microcode keying mechanism for some Intel
      Xeon D Processors with Intel SGX may allow a privileged user to
      potentially enable information disclosure via local access.
  * Fixes for other unspecified functional issues on many processors
  * Updated microcodes:
    sig 0x00050653, pf_mask 0x97, 2023-07-28, rev 0x1000191, size 36864
    sig 0x00050656, pf_mask 0xbf, 2023-07-28, rev 0x4003605, size 38912
    sig 0x00050657, pf_mask 0xbf, 2023-07-28, rev 0x5003605, size 37888
    sig 0x0005065b, pf_mask 0xbf, 2023-08-03, rev 0x7002802, size 30720
    sig 0x00050665, pf_mask 0x10, 2023-08-03, rev 0xe000015, size 23552
    sig 0x000506f1, pf_mask 0x01, 2023-10-05, rev 0x003e, size 11264
    sig 0x000606a6, pf_mask 0x87, 2023-09-14, rev 0xd0003d1, size 307200
    sig 0x000606c1, pf_mask 0x10, 2023-12-05, rev 0x1000290, size 299008
    sig 0x000706a1, pf_mask 0x01, 2023-08-25, rev 0x0040, size 76800
    sig 0x000706a8, pf_mask 0x01, 2023-08-25, rev 0x0024, size 76800
    sig 0x000706e5, pf_mask 0x80, 2023-09-14, rev 0x00c4, size 114688
    sig 0x000806c1, pf_mask 0x80, 2023-09-13, rev 0x00b6, size 111616
    sig 0x000806c2, pf_mask 0xc2, 2023-09-13, rev 0x0036, size 98304
    sig 0x000806d1, pf_mask 0xc2, 2023-09-13, rev 0x0050, size 104448
    sig 0x000806ec, pf_mask 0x94, 2023-07-16, rev 0x00fa, size 106496
    sig 0x000806f8, pf_mask 0x87, 2024-01-03, rev 0x2b000590, size 579584
    sig 0x000806f7, pf_mask 0x87, 2024-01-03, rev 0x2b000590
    sig 0x000806f6, pf_mask 0x87, 2024-01-03, rev 0x2b000590
    sig 0x000806f5, pf_mask 0x87, 2024-01-03, rev 0x2b000590
    sig 0x000806f4, pf_mask 0x87, 2024-01-03, rev 0x2b000590
    sig 0x00090661, pf_mask 0x01, 2023-09-26, rev 0x0019, size 20480
    sig 0x00090672, pf_mask 0x07, 2023-09-19, rev 0x0034, size 224256
    sig 0x00090675, pf_mask 0x07, 2023-09-19, rev 0x0034
    sig 0x000b06f2, pf_mask 0x07, 2023-09-19, rev 0x0034
    sig 0x000b06f5, pf_mask 0x07, 2023-09-19, rev 0x0034
    sig 0x000906a3, pf_mask 0x80, 2023-09-19, rev 0x0432, size 222208
    sig 0x000906a4, pf_mask 0x80, 2023-09-19, rev 0x0432
    sig 0x000906c0, pf_mask 0x01, 2023-09-26, rev 0x24000026, size 20480
    sig 0x000906e9, pf_mask 0x2a, 2023-09-28, rev 0x00f8, size 108544
    sig 0x000906ea, pf_mask 0x22, 2023-07-26, rev 0x00f6, size 105472
    sig 0x000906ec, pf_mask 0x22, 2023-07-26, rev 0x00f6, size 106496
    sig 0x000906ed, pf_mask 0x22, 2023-07-27, rev 0x00fc, size 106496
    sig 0x000a0652, pf_mask 0x20, 2023-07-16, rev 0x00fa, size 97280
    sig 0x000a0653, pf_mask 0x22, 2023-07-16, rev 0x00fa, size 97280
    sig 0x000a0655, pf_mask 0x22, 2023-07-16, rev 0x00fa, size 97280
    sig 0x000a0660, pf_mask 0x80, 2023-07-16, rev 0x00fa, size 97280
    sig 0x000a0661, pf_mask 0x80, 2023-07-16, rev 0x00fa, size 96256
    sig 0x000a0671, pf_mask 0x02, 2023-09-14, rev 0x005e, size 108544
    sig 0x000b0671, pf_mask 0x32, 2023-12-14, rev 0x0122, size 215040
    sig 0x000b06a2, pf_mask 0xe0, 2023-12-07, rev 0x4121, size 220160
    sig 0x000b06a3, pf_mask 0xe0, 2023-12-07, rev 0x4121
    sig 0x000b06e0, pf_mask 0x11, 2023-09-25, rev 0x0015, size 138240
  * New microcodes:
    sig 0x000a06a4, pf_mask 0xe6, 2024-01-03, rev 0x001c, size 136192
    sig 0x000b06a8, pf_mask 0xe0, 2023-12-07, rev 0x4121, size 220160
    sig 0x000c06f2, pf_mask 0x87, 2023-11-20, rev 0x21000200, size 549888
    sig 0x000c06f1, pf_mask 0x87, 2023-11-20, rev 0x21000200
  * source: update symlinks to reflect id of the latest release, 20240312
  * changelog, debian/changelog: fix typos

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue, 12 Mar 2024 20:28:17 -0300

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2024-03-14 20:22:08 +01:00
Zoltan HERPAI
af860c4dbf mxs: switch default kernel to 6.1 
The testing kernel has been available since Jul/2023, let's switch
to it by default.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
 2024-03-14 14:24:16 +01:00
Nick Hainke
7b89388674 ramips: 5.15: delete remaining files 
Remove the remaining configuration entries that were omitted in the
previous commit.

Fixes: 1576474f55 ("ramips: switch to 6.1 kernel")
Signed-off-by: Nick Hainke <vincent@systemli.org>
 2024-03-13 23:51:23 +01:00
Jean Thomas
d1016446da mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 
The GL.iNet X3000 and XE3000 are Wi-Fi 6 5G cellular routers, based on
MediaTek MT7981A SoC. The XE3000 is the same device as the X3000,
except for an additional battery.

Specifications:
 - SoC: Filogic 820 MT7981A (1.3GHz)
 - RAM: DDR4 512M
 - Flash: eMMC 8G, MicroSD card slot
 - WiFi: 2.4GHz and 5GHz with 6 antennas
 - Ethernet:
   - 1x LAN (10/100/1000M)
   - 1x WAN (10/100/1000/2500M)
 - 5G: Quectel RM520N-GL with two nano-SIM card slots
 - USB: 1x USB 2.0 port
 - UART:
   - 3.3V, TX, RX, GND / 115200 8N1

MAC addresses as verified by OEM firmware:
vendor   OpenWrt    address     source
WAN      eth0       label       factory 0x0a (label)
LAN      eth1       label + 1
2g       phy0-ap0   label + 2   factory 0x04
5g       phy1-ap0   label + 3

Installation via U-Boot rescue:
1. Press and hold reset button while booting the device
2. Wait for the Internet led to blink 5 times
3. Release reset button
4. The rescue page is accessible via http://192.168.1.1
5. Select the OpenWrt sysupgrade image and start upgrade
6. Wait for the router to flash new firmware and reboot

Revert to stock firmware:
1. Download the stock firmware from GL.iNet website
2. Use the method explained above to flash the stock firmware

Switch the modem network port between PCIe and USB interfaces:
1. Connect to the AT commands (/dev/ttyUSB2) port using
e.g. minicom: minicom -D /dev/ttyUSB2
2. Check the current modem mode with 'AT+QCFG="data_interface"':
  - 0,0 indicates that the network port uses the USB interface
  - 1,0 indicates that the network port uses the PCIe interface
3. Switch the active interface with:
  - 'AT+QCFG="data_interface",0,0' to use the USB interface
  - 'AT+QCFG="data_interface",1,0' to use the PCIe interface
4. Reboot

Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
 2024-03-13 20:47:23 +00:00
Jean Thomas
e1831321de mediatek: mt7981: pinctrl: add additional emmc groups 
Add new emmc groups in the pinctrl driver for the
MediaTek MT7981 SoC:
* emmc reset, with pin 15.
* emmc 4-bit bus-width, with pins 16 to 19, and 24 to 25.
* emmc 8-bit bus-width, with pins 16 to 25.

The existing emmc_45 group is kept for legacy reasons, even
if this is the union of emmc_reset and emmc_8 groups.

Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
 2024-03-13 20:47:23 +00:00
Jean Thomas
80e6e52026 mediatek: mt7981: pinctrl: add additional uart group 
Add uart1_3 (pins 26, 27) group to the pinctrl driver for the
MediaTek MT7981 SoC.

Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
 2024-03-13 20:47:23 +00:00
Daniel Golle
003b9ff61c generic: mtk_eth_soc: fix PPE hanging issue 
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.

Without this patch, the PPE may experience a hang during the reboot test.

Reference: b40da332df

Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-13 19:18:43 +00:00
Daniel Golle
33d6ba5045 generic: 5.15: mtk_eth_soc: backport fix for hang on link up 
Backport commit faa5f17fe2 ("kernel: mtk_eth_soc: release
MAC_MCR_FORCE_LINK only when MAC is up") to Linux 5.15 as well.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-13 19:18:43 +00:00
Robert Marko
694e647784 dnsmasq: reset PKG_RELEASE 
dnsmasq was recently updated to 2.90, but PKG_RELEASE was not reset to 1.

Fixes: 838a27f64f ("dnsmasq: version 2.90")
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-13 14:02:23 +01:00
Shiji Yang
33c812b639 ath79: add missing kernel config symbols 
Refresh kernel configs to add the missing symbols.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
 2024-03-13 13:48:42 +01:00
Shiji Yang
0efa91d6ea ath79: remove obsolete 5.15 kernel support 
The 5.15 kenel config file, patches and version switches will be
removed in this patch. We will introduce kernel 6.6 support soon.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
 2024-03-13 13:48:42 +01:00
Shiji Yang
a437950770 ath79: switch default kernel to 6.1 
The 6.1 kernel has been tested for over half a year.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
 2024-03-13 13:48:42 +01:00
Liu Dongmiao
51752fa14b libevent2: make cmake use relative imported path 
libevent2's cmake use absolute path, then cmake cannot find it when cross compiling:

```
-- Found libevent include directory: /builder/staging_dir/target-mips_24kc_musl/usr/include
-- Found libevent component: /builder/staging_dir/target-mips_24kc_musl/usr/lib/libevent_core.so
-- Found libevent component: /builder/staging_dir/target-mips_24kc_musl/usr/lib/libevent_extra.so
-- Found libevent component: /builder/staging_dir/target-mips_24kc_musl/usr/lib/libevent_openssl.so
-- Found libevent 2.1.12 in /builder/staging_dir/target-mips_24kc_musl/usr
CMake Error at /builder/staging_dir/target-mips_24kc_musl/usr/lib/cmake/libevent/LibeventTargets-shared.cmake:102 (message):
  The imported target "libevent::core" references the file

     "/usr/lib/libevent_core-2.1.so.7.0.1"

  but this file does not exist.  Possible reasons include:

  * The file was deleted, renamed, or moved to another location.

  * An install or uninstall procedure did not complete successfully.

  * The installation package was faulty and contained

     "/builder/staging_dir/target-mips_24kc_musl/usr/lib/cmake/libevent/LibeventTargets-shared.cmake"

  but not all the files it references.

Call Stack (most recent call first):
  /builder/staging_dir/target-mips_24kc_musl/usr/lib/cmake/libevent/LibeventConfig.cmake:168 (include)
  CMakeLists.txt:34 (find_package)
```

This patch make cmake use relative imported path, so it can find libevent.

Signed-off-by: Liu Dongmiao <liudongmiao@gmail.com>
 2024-03-13 00:24:43 +00:00
Mikhail Zhilkin
1d3d6ef826 ramips: add support for Z-ROUTER ZR-2660 
This commit adds support for Z-ROUTER ZR-2660 (also known as Routerich
AX1800) wireless WiFi 6 router.

Specification
-------------
- SoC       : MediaTek MT7621AT, MIPS, 880 MHz
- RAM       : 256 MiB
- Flash     : NAND 128 MiB (AMD/Spansion S34ML01G2)
- WLAN      :
  - 2.4 GHz : MediaTek MT7905D/MT7975 (14c3:7916), b/g/n/ax, MIMO 2x2
  - 5 GHz   : MediaTek MT7915E (14c3:7915), a/n/ac/ax, MIMO 2x2
- Ethernet  : 10/100/1000 Mbps x4 (1x WAN, 3x LAN)
- USB       : 1x 2.0
- UART      : 3.3V, 115200n8, pins are silkscreened on the pcb
- Buttons   : 1x Reset
- LEDs      : 1x WiFi 2.4 GHz (green)
              1x WiFi 5 GHz (green)
              1x LAN (green)
              1x WAN (green)
              1x WAN no-internet (red)
- Power     : 12 VDC, 1 A

Installation
------------
1. Run tftp server on your PC (IP: 192.168.2.2) and put OpenWrt initramfs
   image (initramfs.bin) to the tftp root dir
2. Open the following link in the browser to enable telnet:
	http://192.168.2.1/cgi-bin/telnet_ssh
3. Connect to the router (default IP: 192.168.2.1) using telnet shell
   (credentials - user:admin)
4. Run the following commands in the telnet shell (this will install
   OpenWrt initramfs image on nand flash):
	cd /tmp
	tftp -g -r initramfs.bin 192.168.2.2
	mtd write initramfs.bin firmware
	mtd erase firmware_backup
	reboot
5. Copy OpenWrt sysupgrade image (sysupgrade.bin) to the /tmp dir of the
   router
6. Connect to the router (IP: 192.168.1.1) using ssh shell and run
   sysupgrade command:
	sysupgrade -n /tmp/sysupgrade.bin

Return to stock
---------------
1. Copy stock firmware (stock.bin) to the /tmp dir of the router using scp
2. Run following command in the router shell:
	cd /tmp
	mtd write stock.bin firmware
	reboot

Recovery
--------
Connect uart (pins are silkscreened on the pcb), interrupt boot process by
pressing any key, use u-boot menu to flash stock firmware image or OpenWrt
initramfs image.

MAC addresses
-------------
+---------+-------------------+-----------+
|         | MAC               | Algorithm |
+---------+-------------------+-----------+
| LAN     | 24:0f:5e:xx:xx:4c | label     |
| WAN     | 24:0f:5e:xx:xx:4d | label+1   |
| WLAN 2g | 24:0f:5e:xx:xx:4e | label+2   |
| WLAN 5g | 24:0f:5e:xx:xx:4f | label+3   |
+---------+-------------------+-----------+
The WLAN 2.4 MAC was found in 'factory', 0x4
The LAN MAC was found in 'factory', 0xfff4
The WAN MAC was found in 'factory', 0xfffa

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
 2024-03-12 23:57:41 +01:00
Paul Donald
f753d3152f lldpd: update URL 
update Makefile URL

Signed-off-by: Paul Donald <newtwen@gmail.com>
 2024-03-12 20:41:01 +01:00
Paul Donald
5364fe0f01 lldpd: shellcheck fixes 
No functionality/behaviour changes; code is synonymous

Tested on: 22.03.6

Signed-off-by: Paul Donald <newtwen@gmail.com>
 2024-03-12 20:40:25 +01:00
Paul Donald
497fafb8ae lldpd: implement lldp_policy parameter 
For certain lldp_class scenarios (2 & 3) a policy must be set also.
Class 4 is default, although it's good to handle the policy eventuality.

Here, set a default lldp_policy for all lldp_class scenarios. Any
lldp_policy can now be set.

Depends on PR #14584 (which introduced an `if` block)

Tested on 22.03.5, 22.03.6

Signed-off-by: Paul Donald <newtwen@gmail.com>
 2024-03-12 20:39:06 +01:00
Robert Marko
532de62e4c kernel: config: 6.6: disable ZSTD debug info compression by default 
When kernel 6.6 is being compiled with GCC13 it will prompt for:
Compressed Debug information
> 1. Don't compress debug information (DEBUG_INFO_COMPRESSED_NONE)
  2. Compress debugging information with zlib (DEBUG_INFO_COMPRESSED_ZLIB)
  3. Compress debugging information with zstd (DEBUG_INFO_COMPRESSED_ZSTD) (NEW)

This is because kernel now also has support for compressing debug info
with ZSTD, so add the missing symbol and disable it by default.

Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-12 19:49:56 +01:00
Daniel Golle
65df33fc76 ramips: add support for YunCore G720 
The YunCore G720 is a dual band 802.11ax router with 5 GbE ports.

Specs:
- SoC: MediaTek MT7621
- Ethernet: 5x GbE ports (built-in MT7530)
- Wireless 2.4GHz / 5GHz: MediaTek MT7915E
- RAM: 256MiB
- ROM: 16MiB (W25Q128)
- 1 Button (reset)
- 8 LEDs (1x system, 2x wifi, 5x switch ports)

Flash instructions:
The vendor firmware is based on OpenWrt, the sysupgrade image can be
flashed using the '-F' (force) option on the CLI.
Make sure not to keep settings when doing so.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-12 16:48:42 +00:00
Nick Hainke
1576474f55 ramips: switch to 6.1 kernel 
We have had the testing kernel for several weeks now. Let's switch to 6.1
to have more testers. Additionally, 6.6 is already in the pipeline.

Signed-off-by: Nick Hainke <vincent@systemli.org>
 2024-03-12 17:28:52 +01:00
Weijie Gao
4468cae502 kernel: config: add missing symbol for kenrel 6.6 
CONFIG_HID_SUPPORT:
Set default value for kmod-hid

CONFIG_USB_CDNS3_IMX:
CONFIG_USB_CDNS3_PCI_WRAP:
CONFIG_USB_CDNSP_PCI:
Introduced by db0d7cf6a1 (usb: add cdns3 support)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
 2024-03-12 22:52:28 +08:00
Robert Marko
645b44d8ff Revert "kernel: config: add symbol introduced with 6.2" 
This reverts commit 7ea82bc17d.

This commit does not meet formal requirments, and has been merged due to
my error.

Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-12 13:01:59 +01:00
Robert Marko
a158f9f405 starfive: refresh patches 
CI reported that patches need to be refreshed, so lets refresh.

Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-03-12 10:27:38 +01:00
CharlesMengCA
7ea82bc17d
kernel: config: add symbol introduced with 6.2 
CONFIG_DEBUG_INFO_COMPRESSED_ZSTD, required by  GCC 13.0+

Compress the debug information using zstd. This may provide better compression than zlib, for about the same time costs, but requires newer toolchain support. Requires GCC 13.0+ or Clang 16.0+, binutils 2.40+, and zstd.


Signed-off-by: CharlesMengCA <58993776+CharlesMengCA@users.noreply.github.com>
 2024-03-12 00:06:14 -04:00
Daniel Golle
f7a68458b4 kernel: modules: don't override NLS dependencies 
Recent changes for Linux 6.6 broke things when building with older
kernels:
Package kmod-fs-jfs is missing dependencies for the following libraries:
nls_base.ko

Fix this by adding NLS dependencies after the added dependency applying
on Linux 6.6.

Fixes: f9198480da ("kernel: modules: fs: adapt for kernel 6.6")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-11 23:49:25 +00:00
Daniel Golle
448b48c245 mediatek: add Linux 6.6 as testing kernel 
Add KERNEL_TESTING_PATCHVER for Linux 6.6.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-11 21:22:12 +00:00
Daniel Golle
cd509d739a mediatek: add kernel configs for Linux 6.6 
Add config-6.6 for all mediatek subtargets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-11 21:22:12 +00:00
Daniel Golle
3043bd2621 mediatek: fix build of MT7988 clk drivers on Linux 6.6 
As shared remove functions now returns void instead of int we need to
use .remove_new instead of .remove.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-11 21:22:12 +00:00
Daniel Golle
dcac4a28e6 mediatek: leds-smartrg-system: fix build on Linux 6.6 
Adapt to changed function pointer prototypes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-11 21:22:12 +00:00
Daniel Golle
5b4bbd1097 mediatek: 6.6: refresh patches 
Refresh patches and fix changed path for 32-bit mediatek boards
'arch/arm/dts' -> 'arch/arm/dts/mediatek'

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-11 21:22:12 +00:00
Daniel Golle
f4223abd8f mediatek: 6.6: drop patches backported as fixes 
Drop patches backported as fixes in later kernel version.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-11 21:22:12 +00:00
Daniel Golle
23a8e28256 mediatek: 6.6: drop backport patches 
Drop all backport patches that are now included in kernel 6.6.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-03-11 21:22:12 +00:00