openwrt/target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch

105 lines
2.2 KiB
Diff
Raw Normal View History

From b6c99228c8edc5e67d8229ba1c5f76cce210ddfc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
Date: Wed, 27 Oct 2021 00:57:06 +0800
Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Define the Realtek RTL8365MB switch without interrupt support on the device
tree of Asus RT-AC88U.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 ++++++++++++++++++++
1 file changed, 77 insertions(+)
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,6 +93,83 @@
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
};
+
+ switch {
+ compatible = "realtek,rtl8365mb";
+ /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ realtek,disable-leds;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ phy-handle = <&ethphy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan6";
+ phy-handle = <&ethphy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan7";
+ phy-handle = <&ethphy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan8";
+ phy-handle = <&ethphy3>;
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&sw0_p5>;
+ phy-mode = "rgmii";
+ tx-internal-delay-ps = <2000>;
+ rx-internal-delay-ps = <2000>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+ mdio {
+ compatible = "realtek,smi-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+ };
};
&srab {