i386 fenv code checks __hwcap for sse support, but in fesetround the sse
code was unconditionally jumped over after the test so the sse rounding
mode was never set.
The log, log2 and log10 functions share a lot of code and to a lesser
extent log1p too. A small part of the code was kept separately in
__log1p.h, but since it did not capture much of the common code and
it was inlined anyway, it did not solve the issue properly. Now the
log functions have significant code duplication, which may be resolved
later, until then they need to be modified together.
logl, log10l, log2l, log1pl:
* Fix the sign when the return value should be -inf.
* Remove the volatile hack from log10l (seems unnecessary)
log1p, log1pf:
* Change the handling of small inputs: only |x|<2^-53 is special
(then it is enough to return x with the usual subnormal handling)
this fixes the sign of log1p(0) in downward rounding.
* Do not handle the k==0 case specially (other than skipping the
elaborate argument reduction)
* Do not handle 1+x close to power-of-two specially (this code was
used rarely, did not give much speed up and the precision wasn't
better than the general)
* Fix the correction term formula (c=1-(u-x) was used incorrectly
when x<1 but (double)(x+1)==2, this was not a critical issue)
* Use the exact same method for calculating log(1+f) as in log
(except in log1p the c correction term is added to the result).
log, logf, log10, log10f, log2, log2f:
* Use double_t and float_t consistently.
* Now the first part of log10 and log2 is identical to log (until the
return statement, hopefully this makes maintainence easier).
* Most special case formulas were removed (close to power-of-two and
k==0 cases), they increase the code size without providing precision
or performance benefits (and obfuscate the code).
Only x==1 is handled specially so in downward rounding mode the
sign of zero is correct (the general formula happens to give -0).
* For x==0 instead of -1/0.0 or -two54/0.0, return -1/(x*x) to force
raising the exception at runtime.
* Arg reduction code is changed (slightly simplified)
* The thresholds for arg reduction to [sqrt(2)/2,sqrt(2)] are now
consistently the [0x3fe6a09e00000000,0x3ff6a09dffffffff] and the
[0x3f3504f3,0x3fb504f2] intervals for double and float reductions
respectively (the exact threshold values are not critical)
* Remove the obsolete comment for the FLT_EVAL_METHOD!=0 case in log2f
(The same code is used for all eval methods now, on i386 slightly
simpler code could be used, but we have asm there anyway)
all:
* Fix signed int arithmetics (using unsigned for bitmanipulation)
* Fix various comments
despite being marked legacy, this was specified by SUSv3 as part of
the XSI option; only the most recent version of the standard dropped
it. reportedly there's actual code using it.
* parse IPv4 dotted-decimal correctly (without strtoul, no leading zeros)
* disallow single leading ':' in IPv6 address
* allow at most 4 hex digits in IPv6 address (according to RFC 2373)
* have enough hex fields in IPv4 mapped IPv6 address
* disallow leading zeros in IPv4 mapped IPv6 address
* allow at most 4 parts
* bounds check the parts correctly
* disallow leading whitespace and sign
* check the address family before falling back to IPv6
despite being practically deprecated, these functions are still part
of the standard and thus cannot reside in a file that also contains
namespace pollution. this reverts some of the changes made in commit
e40f48a421.
fcntl.h: AT_* is not a reserved namespace so extensions cannot be
exposed by default.
langinfo.h: YESSTR and NOSTR were removed from the standard.
limits.h: NL_NMAX was removed from the standard.
signal.h: the conditional for NSIG was wrongly checking _XOPEN_SOURCE
rather than _BSD_SOURCE. this was purely a mistake; it doesn't even
match the commit message from the commit that added it.
this fixes an issue reported by Daniel Thau whereby faccessat with the
AT_EACCESS flag did not work in cases where the process is running
suid or sgid but without root privileges. per POSIX, when the process
does not have "appropriate privileges", setuid changes the euid, not
the real uid, and the target uid must be equal to the current real or
saved uid; if this condition is not met, EPERM results. this caused
the faccessat child process to fail.
using the setreuid syscall rather than setuid works. POSIX leaves it
unspecified whether setreuid can set the real user id to the effective
user id on processes without "appropriate privileges", but Linux
allows this; if it's not allowed, there would be no way for this
function to work.
based on patch by Michael Forney. at the same time, I've changed the
if branch to be more clear, avoiding the comma operator.
the underlying issue is that Linux always returns ERANGE when size is
too short, even when it's zero, rather than returning EINVAL for the
special case of zero as required by POSIX.
there is no reason to check the return value for setting errno, since
brk never returns errors, only the new value of the brk (which may be
the same as the old, or otherwise differ from the requested brk, on
failure).
it may be beneficial to eventually just eliminate this file and make
the syscalls inline in malloc.c.
the va_arg call for the argv[]-terminating null pointer was missing,
so this pointer was being wrongly used as the environment pointer.
issue reported by Timo Teräs. proposed patch slightly modified to
simplify the resulting code.
bug report and patch by Michael Forney. the terminating null pointer
at the end of the gr_mem array was overwriting the beginning of the
string data, causing the gr_name member to always be a zero-length
string.
issue reported by Michael Forney:
"If wn becomes 0 after processing a chunk of 4, mbsrtowcs currently
continues on, wrapping wn around to -1, causing the rest of the string
to be processed.
This resulted in buffer overruns if there was only space in ws for wn
wide characters."
the original patch submitted added an additional check for !wn after
the loop; to avoid extra branching, I instead just changed the wn>=4
check to wn>=5 to ensure that at least one slot remains after the
word-at-a-time loop runs. this should not slow down the tail
processing on real-world usage, since an extra slot that can't be
processed in the word-at-a-time loop is needed for the null
termination anyway.
This is a change in ISO C11 annex F (F.10.11p1), comparision macros
can't round their arguments to their semantic type when the evaluation
format has wider range and precision. (ie. they must be consistent with
the builtin relational operators)
atomic store was lacking a barrier, which was fine for legacy arm with
no real smp and kernel-emulated cas, but unsuitable for more modern
systems. the kernel provides another "kuser" function, at 0xffff0fa0,
which could be used for the barrier, but using that would drop support
for kernels 2.6.12 through 2.6.14 unless an extra conditional were
added to check for barrier availability. just using the barrier in the
kernel cas is easier, and, based on my reading of the assembly code in
the kernel, does not appear to be significantly slower.
at the same time, other atomic operations are adapted to call the
kernel cas function directly rather than using a_cas; due to small
differences in their interface contracts, this makes the generated
code much simpler.
if a multithreaded program became non-multithreaded (i.e. all other
threads exited) while one thread held an internal lock, the remaining
thread would fail to release the lock. the the program then became
multithreaded again at a later time, any further attempts to obtain
the lock would deadlock permanently.
the underlying cause is that the value of libc.threads_minus_1 at
unlock time might not match the value at lock time. one solution would
be returning a flag to the caller indicating whether the lock was
taken and needs to be unlocked, but there is a simpler solution: using
the lock itself as such a flag.
note that this flag is not needed anyway for correctness; if the lock
is not held, the unlock code is harmless. however, the memory
synchronization properties associated with a_store are costly on some
archs, so it's best to avoid executing the unlock code when it is
unnecessary.
this was resulting in crashes in posix_spawn on mips, and would have
affected applications calling clone too. since the prototype for
__clone has it as a variadic function, it may not assume that 16($sp)
is writable for use in making the syscall. instead, it needs to
allocate additional stack space, and then adjust the stack pointer
back in both of the code paths for the parent process/thread.
These constants are not specified by POSIX, but they are in the reserved
namespace, glibc and bsd systems seem to provide them as well.
(Note that POSIX specifies -NZERO and NZERO-1 to be the limits, but
PRIO_MAX equals NZERO)
the changes were verified using various sources:
linux: include/uapi/linux/elf.h
binutils: include/elf/common.h
glibc: elf/elf.h
sysv gabi: http://www.sco.com/developers/gabi/latest/contents.html
sun linker docs: http://docs.oracle.com/cd/E18752_01/pdf/817-1984.pdf
and platform specific docs
- fixed:
EF_MIPS_* E_MIPS_* e_flags: fixed accoding to glibc and binutils
- added:
ELFOSABI_GNU for EI_OSABI entry: glibc, binutils and sysv gabi
EM_* e_machine values: updated according to linux and glibc
PN_XNUM e_phnum value: from glibc and linux, see oracle docs
NT_* note types: updated according to linux and glibc
DF_1_* flags for DT_FLAGS_1 entry: following glibc and oracle docs
AT_HWCAP2 auxv entry for more hwcap bits accoding to linux and glibc
R_386_SIZE32 relocation according to glibc and binutils
EF_ARM_ABI_FLOAT_* e_flags: added following glibc and binutils
R_AARCH64_* relocs: added following glibc and aarch64 elf specs
R_ARM_* relocs: according to glibc, binutils and arm elf specs
R_X86_64_* relocs: added missing relocs following glibc
- removed:
HWCAP_SPARC_* flags were moved to arch specific header in glibc
R_ARM_SWI24 reloc is marked as obsolete in glibc, not present in binutils
not specified in arm elf spec, R_ARM_TLS_DESC reused its number
see http://www.codesourcery.com/publications/RFC-TLSDESC-ARM.txt
- glibc changes not pulled in:
ELFOSABI_ARM_AEABI (bare-metal system, binutils and glibc disagrees about the name)
R_68K_* relocs for unsupported platform
R_SPARC_* ditto
EF_SH* ditto (e_flags)
EF_S390* ditto (e_flags)
R_390* ditto
R_MN10300* ditto
R_TILE* ditto
CLONE_PARENT is not necessary (CLONE_THREAD provides all the useful
parts of it) and Linux treats CLONE_PARENT as an error in certain
situations, without noticing that it would be a no-op due to
CLONE_THREAD. this error case prevents, for example, use of a
multi-threaded init process and certain usages with containers.
the removed ARPHRD_IEEE802154_PHY was only present in the kernel api
in v2.6.31 (by accident), but it got into the glibc headers (in 2009)
and remained there since this header was not updated since then.
