Apparently useful for dumping DVD. Could also be used to rip streams
with libquvi and such, but for that there are better tools. Actually
I doubt there aren't better tools to dump DVDs, but whatever, this was
a feature request, so I don't need a good reason.
This adds Mission Control fullscreen functionality to mpv. Since this doesn't
play well with many of mpv's features disable it by default. Users can activate
this feature by using `--native-fs` when starting mpv.
Fixes#34
A "watch later" command is now mapped to Shift+Q. This quits the player
and stores the playback state in a config file in ~/.mpv/watch_later/.
When calling the player with the same file again, playback is resumed
at that time position.
It's also possible to make mpv save playback state always on quit with
the --save-position-on-quit option. Likewise, resuming can be disabled
with the --no-resume-playback option.
This also attempts to save some playback parameters, like fullscreen
state or track selection. This will unconditionally override config
settings and command line options (which is probably not what you would
expect, but in general nobody will really care about this). Some things
are not backed up, because that would cause various problems. Additional
subtitle files, video filters, etc. are not stored because that would be
too hard and fragile. Volume/mute state are not stored because it would
mess up if the system mixer is used, or if the system mixer was
readjusted in the meantime.
Basically, the tradeoff between perfect state restoration and
complexity/fragility makes it not worth to attempt to implement
it perfectly, even if the result is a little bit inconsistent.
This is an attempt to make quoting of sub-option values less awkward,
even if it works only with some shells. This is needed mainly for
vf_lavfi. Also update the vf_lavfi manpage section.
Allows stepping back one frame via the frame_back_step inout command,
bound to "," by default.
This uses the precise seeking facility, and a perfect frame index built
on the fly. The index is built during playback and precise seeking, and
contains (as of this commit) the last 100 displayed or skipped frames.
This index is used to find the PTS of the previous frame, which is then
used as target for a precise seek. If no PTS is found, the core attempts
to do a seek before the current frame, and skip decoded frames until the
current frame is reached; this will create a sufficient index and the
normal backstep algorithm can be applied.
This can be rather slow. The worst case for backstepping is about the
same as the worst case for precise seeking if the previous frame can be
deduced from the index. If not, the worst case will be twice as slow.
There's also some minor danger that the index is incorrect in case
framedropping is involved. For framedropping due to --framedrop, this
problem is ignored (use of --framedrop is discouraged anyway). For
framedropping during precise seeking (done to make it faster), we try
to not add frames to the index that are produced when this can happen.
I'm not sure how well that works (or if the logic is sane), and it's
sure to break with some video filters. In the worst case, backstepping
might silently skip frames if you backstep after a user-initiated
precise seek. (Precise seeks to do indexing are not affected.)
Likewise, video filters that somehow change timing of frames and do not
do this in a deterministic way (i.e. if you seek to a position, frames
with different timings are produced than when the position is reached
during normal playback) will make backstepping silently jump to the
wrong frame. Enabling/disabling filters during playback (like for
example deinterlacing) will have similar bad effects.
Background: slice support has been completely removed, because it
doesn't work with multithreading, and provides a rather bad complexity
to performance tradeoff otherwise.
This allows things like:
'--vf=lavfi="gradfun=20:30"'
Adjust the documentation for vf_lavfi to make the example less verbose.
As an unrelated change, add a general description to vf_lavfi.
Requires recent FFmpeg/Libav git versions. Earlier versions will not
be supported, as the API is different. (A libavfilter version that
uses AVFrame instead of AVFilterBuffer is needed.)
Note that this is sort of useless, because the option parser prevents
you from making use of the full libavfilter graph syntax. This has to be
fixed later.
Most of the filter creation code (half of the config() function) has
been taken from avplay.c.
This code is not based on MPlayer's vf_lavfi. The MPlayer code doesn't
compile as it hasn't been updated through multiple libavfilter API
changes, making it completely useless as a starting point.
These require bleeding edge libass (latest git version), and will be
ignored otherwise.
I'm not sure about the blur factor and scaling. The ASS/VSFilter
semantics for blur scaling are a bad mess. Might require further
investigation.
Anything this option did has been removed in the preceding 3 commits.
Note that even though these options sounded like a good idea (like
setting accuracy vs. speed tradeoffs), they were not really properly
implemented.
The only thing this option did was changing the behavior of af_volume.
The option decided what sample format af_volume would use, but only if
the sample format was not already float. If the option was set, it would
default to float, otherwise to S16.
Remove use of the option and all associated code, and make af_volume
always use float (unless a af_volume specific sub-option is set).
Silence maximum value tracking. This message is printed when the filter
is destroyed, and it's slightly annoying. Was enabled due to enabling
float by default.
This option can be used to selectively reset settings when playing the
next file in the playlist (i.e. restore mplayer and mplayer2 behavior).
Might remove this option again should it turn out that nobody uses it.
Makes sure that seeking to a given time position shows the subtitle at
that position. This can fail if the subtitle packet is not close enough
to the seek target. Always enabled for hr-seeks, and can be manually
enabled for normal seeks with --mkv-subtitle-preroll.
This helps displaying subtitles correctly with ordered chapters. When
switching ordered chapter segments, a seek is performed. If the subtitle
is timed slightly before the start of the segment, it normally won't be
demuxed. This is a problem with all seeks, but in this case normal
playback is affected. Since switching segments always uses hr-seeks,
the code added by this commit is always active in this situation.
If no subtitles are selected or the subtitles come from an external
file, the demuxer should behave exactly as before this commit.
The OSX part of the Apple Remote was unmaintained for a long time and was not
working anymore. I tried to update the cookies to what the current versions of
OS X expect without much luck. I decided to remove it since Apple is not
including the IR receiver anymore in new hardware and it's clear that wifi
based remotes are the way to go.
A third party iOS app should be used in it's place. In the future we could look
into having a dedicated iOS Remote Control app like VLC and XBMC do.
The Linux side (`appleir.c`) was relatively tidy but it looks like LIRC can be
configured to work with any version of Apple Remote [1] and is more maintained.
[1] LIRC Apple Remote configs: http://lirc.sourceforge.net/remotes/apple/
Drawing the bar with vector drawings (instead with characters from the
OSD font) offers more flexibility and looks better. This also adds
chapter marks to the OSD bar, which are visible as small triangles on
the top and bottom inner border of the bar.
Change the default position of the OSD bar below the center of the
screen. This is less annoying than putting the bar directly into the
center of the view, where it obscures the video. The new position is
not quite on the bottom of the screen to avoid collisions with
subtitles.
The old centered position can be forced with ``--osd-bar-align-y=0``.
Also make it possible to change the OSD bar width/height with the new
--osd-bar-w and --osd-bar-h options.
It's possible that the new OSD bar renders much slower than the old
one. There are two reasons for this: 1. the character based bar
allowed libass to cache each character, while the vector drawing forces
it to redraw every time the bar position changes. 2., the bar position
is updated at a much higher granularity (the bar position is passed
along as float instead of as integer in the range 0-100, so the bar
will be updated on every single video frame).
Allows playing video with alpha information on X11, as long as the video
contains alpha and the window manager does compositing. See vo.rst.
Whether a window can be transparent is decided by the choice of the X
Visual used for window creation. Unfortunately, there's no direct way to
request such a Visual through the GLX or the X API, and use of the
XRender extension is required to find out whether a Visual implies a
framebuffer with alpha used by XRender (see for example [1]). Instead of
depending on the XRender wrapper library (which would require annoying
configure checks, even though XRender is virtually always supported),
use a simple heuristics to find out whether a Visual has alpha. Since
getting it wrong just means an optional feature will not work as
expected, we consider this ok.
[1] http://stackoverflow.com/questions/4052940/how-to-make-an-opengl-rendering-context-with-transparent-background/9215724#9215724
This way it's possible to retrieve correct information about video, like
actual width/height, which in general are available only after at least
one frame has been sent to the video output, such as dwidth/dheight.
mpv_identify.sh becomes a bit slower, because we let it decode enough
audio and video to fill the audio buffers and to send one frame to the
video output. Also, --playing-msg isn't shown anymore with --frames=0
(could be fixed by special-casing it, should this break any use cases).
Note that in some corner cases, like when the demuxer for some reason
returns lots of audio packets but no video packets at the start, but
video actually starts later, the --playing-msg will still be output
before video starts.
This has the same (useless) definition as frame stepping in audio-only
mode: one frame means one playloop iteration. (It's relatively useless,
because one playloop iteration has a random duration. But it makes
--frames=1 work, which is useful again.)
Add new properties "dwidth" and "dheight", which contain the video
size as known by the VO (not necessarily what the VO makes out of them,
i.e. without window scaling and panscan).
Remove `af_resample` and `af_lavcresample`. The former is a mess while the
latter uses an API that was long deprecated in libavcodec and is now removed.
`af_lavrresample` rougly has the same features and structure of
`af_lavcresample`.
libswresample fallback by wm4.
Latest nvidia drivers ignore the application setting, so this switch
makes even less sense than before. It's still possible to control this
with VO specific suboptions.
