Read-only information about all bindings. Somewhat hoping someone can
make a nice GUI-like overlay thing for it, which provides information
about mapped keys.
No reason to have this as bstr, just makes everything more complex.
Also clear mp_cmd.sender when it's copied. Otherwise it would be a
dangling pointer. Apparently it's never set to non-NULL in this
situation, but this is cleaner anyway.
Should be without consequences. I think this is less trouble, because
code frequently wants to add/remove bits for modifiers and key state
from key codes, and with this change you can't accidentally break it by
testing or removing bits from the old -1 value.
Particularly for "any_unicode" mappings, so they don't have to
special-case keys like '#' and ' ', which are normally mapped to
symbolic names for input.conf reasons. (Though admittedly, this is a
pretty minor thing, since API users could map these manually.)
The intended target for this is the mpv.repl script, which manually
added every single ASCII key as a separate key binding. This provides a
simpler mechanism, that will catch any kind of text input.
Due to its special nature, explicitly do not give a guarantee for
compatibility; thus the warning in input.rst.
Options marked with this flag were changed to strictly read-only after
initialization (mpv_initialize() in the client API, after option parsing
and config file loading with the CLI player).
This used to be necessary, because there was a single option struct that
could be accessed by multiple threads. For example, --config-dir sets
MPOpts.force_configdir, which was read whenever anything accessed the
mpv config dir (which could be on different threads, e.g. font
initialization tries to lookup fonts.conf from an arbitrary thread).
This isn't needed anymore, because threads now access these in a thread
safe way. In the case of --config-dir, the path is actually just copied
on init.
This M_OPT_FIXED mechanism is thus not strictly needed anymore. It still
prevents writing to some options that cannot take effect at runtime, but
even that can be dropped. In general, all mpv options can be changed any
time at runtime, even if they never take effect, and there's no need to
make an exception for a very low number of options. So just get rid of
it.
sdl_gamepad.c and vo_sdl.c both have their own event loops and run in
separate threads. They don't know of each other (and shouldn't). Since
SDL only has one global event loop (why didn't they fix this in SDL2?),
these obviously clash. The actual behavior is relatively subtle, which
event being randomly dispatched to either of the threads.
This is very regrettable. Very.
Work this around. "Fortunately" SDL exposes its global state to some
degree. SDL_WasInit() returns whether a "subsystem" was initialized, and
you could say the one who initialized it owns it. Both SDL_INIT_VIDEO
and SDL_INIT_GAMECONTROLLER implicitly enable SDL_INIT_EVENTS, and the
event loop is indeed the resource that cannot be shared.
Unfortunately, this is still racy, since SDL_InitSubSystem is a second
call, and succeeds if the subsystem is already initialized (increases a
refcount I think). But good enough. Blame SDL for everything.
(I think I made this commit message too long. Nobody cares even.)
Fixes: #7085
Enabling this by default probably causes a number of issues, such as
breaking vo_sdl, or reacting to various input devices while the window
is not focused. It's also pretty obscure, or at least new. Disable it by
default.
The code is very basic:
- only handles gamepads, could be extended for generic joysticks in the
future.
- only has button mappings for controllers natively supported by SDL2.
I heard more can be added through env vars, there's also ways to load
mappings from text files, but I'd rather not go there yet. Common ones
like Dualshock are supported natively.
- analog buttons (TRIGGER and AXIS) are mapped to discrete buttons using an
activation threshold.
- only supports one gamepad at a time. the feature is intented to use
gamepads as evolved remote controls, not play multiplayer games in mpv :)
On my system, when trying to use mpv with a read-only fd created by
python 3.7, `send` triggers ENOTSOCK, not EBADF. Extend the logic to
detect non-writable fds by this `errno`.
The `strncpy` function will not always place a terminating `NUL` if the
source is longer than the destination buffer. Instead, let `strncpy`
truncate as it normally would, but leave the last byte alone (it is
zero-initialized when declared).
This flag is used only by the command parser. Its value overlapped with
some of the existing m_option flags, but only flags that did not matter
for the command parser (i.e. the flag bits used had mostly private uses
in each component). It's still a bit unclean and dangerous to use an
essentially random value, so reuse M_OPT_OPTIONAL_PARAM for it.
Since M_OPT_OPTIONAL_PARAM has a slightly longer name than
MP_CMD_OPT_ARG, I'm going to keep the old name.
The only effective difference is that the former explicitly checks
whether the JSON value type is string, and errors out if not. The rest
is exactly the same (mpv_set_property_string is mpv_set_property with
MPV_FORMAT_STRING).
It seems silly to keep this, so just remove it.
This was always a legacy thing. Remove it by applying an orgy of
mp_get_config_group() calls, and sometimes m_config_cache_alloc() or
mp_read_option_raw().
win32 changes untested.
Until now, they could be aborted only by ending playback, and calling
mpv_abort_async_command didn't do anything.
This requires furthering the mess how playback abort is done. The main
reason why mp_cancel exists at all is to avoid that a "frozen" demuxer
(blocked on network I/O or whatever) cannot freeze the core. The core
should always get its way. Previously, there was a single mp_cancel
handle, that could be signaled, and all demuxers would unfreeze. With
external files, we might want to abort loading of a certain external
file, which automatically means they need a separate mp_cancel. So give
every demuxer its own mp_cancel, and "slave" it to whatever parent
mp_cancel handles aborting.
Since the mpv demuxer API conflates creating the demuxer and reading the
file headers, mp_cancel strictly need to be created before the demuxer
is created (or we couldn't abort loading). Although we give every
demuxer its own mp_cancel (as "enforced" by cancel_and_free_demuxer),
it's still rather messy to create/destroy it along with the demuxer.
This flag is used only by the command parser. Its value overlapped with
some of the existing m_option flags, but only flags that did not matter
for the command parser (i.e. the flag bits used had mostly private uses
in each component). It's still a bit unclean and dangerous to use an
essentially random value, so reuse M_OPT_OPTIONAL_PARAM for it.
Since M_OPT_OPTIONAL_PARAM has a slightly longer name than
MP_CMD_OPT_ARG, I'm going to keep the old name.
Before this change, only 1 command or so had named arguments. There is
no reason why other commands can't have them, except that it's a bit of
work to add them.
Commands with variable number of arguments are inherently incompatible
to named arguments, such as the "run" command. They still have dummy
names, but obviously you can't assign multiple values to a single named
argument (unless the argument has an array type, which would be
something different). For now, disallow using named argument APIs with
these commands. This might change later.
2 commands are adjusted to not need a separate default value by changing
flag constants. (The numeric values are C only and can't be set by
users.)
Make the command syntax in the manpage more consistent. Now none of the
allowed choice/flag names are in the command header, and all arguments
are shown with their proper name and quoted with <...>.
Some places in the manpage and the client.h doxygen are updated to
reflect that most commands support named arguments. In addition, try to
improve the documentation of the syntax and need for escaping etc. as
well.
(Or actually most uses of the word "argument" should be "parameter".)
I wanted to put all commands through mpv_command_node_async() instead of
mpv_command_node(). Using synchronous commands over a synchronous
transport doesn't make sense anyway.
This would have used the request_id field in IPC requests as reply ID
for the async commands. But the latter need to be [u]int64, while the
former can be any type. To avoid that we need an extra lookup table for
mapping reply IDs to request_id values, we now require that request_id
fields are integers.
Since this would be an incompatible change, just deprecate non-integers
for now, and plan the change for a later time.
The only effective difference is that the former explicitly checks
whether the JSON value type is string, and errors out if not. The rest
is exactly the same (mpv_set_property_string is mpv_set_property with
MPV_FORMAT_STRING).
It seems silly to keep this, so just remove it.
Many asynchronous commands are potentially long running operations, such
as loading something from network or running a foreign process.
Obviously it shouldn't just be possible for them to freeze the player if
they don't terminate as expected. Also, there will be situations where
you want to explicitly stop some of those operations explicitly. So add
an infrastructure for this.
Commands have to support this explicitly. The next commit uses this to
actually add support to a command.
This supports named arguments. It benefits from the infrastructure of
async commands.
The plan is to reimplement Lua's utils.subprocess() on top of it.
Named arguments should make it easier to have long time compatibility,
even if command arguments get added or removed. They're also much nicer
for commands with a large number of arguments, especially if many
arguments are optional.
As of this commit, this can not be used, because there is no command yet
which supports them. See the following commit.
This enables two types of command behavior:
1. Plain async behavior, like "loadfile" not completing until the file
is fully loaded.
2. Running parts of the command on worker threads, e.g. for I/O, such as
"sub-add" doing network accesses on a thread while the core
continues.
Both have no implementation yet, and most new code is actually inactive.
The plan is to implement a number of useful cases in the following
commits.
The most tricky part is handling internal keybindings (input.conf) and
the multi-command feature (concatenating commands with ";"). It requires
a bunch of roundabout code to make it do the expected thing in
combination with async commands.
There is the question how commands should be handled that come in at a
higher rate than what can be handled by the core. Currently, it will
simply queue up input.conf commands as long as memory lasts. The client
API is limited by the size of the reply queue per client. For commands
which require a worker thread, the thread pool is limited to 30 threads,
and then will queue up work in memory. The number is completely
arbitrary.
This gets rid of run_command() and its big switch statement, which was
an idiotically big function of almost 1000 lines.
The switch is replaced with a callback per command, and each command is
now implemented in its own function. Command IDs are not needed anymore,
so the mp_command_type enum disappears.
There should be no functional changes, but since this refactors 64
commands, regressions are possible.
The handler() parameter is void*, because in theory the input code is
supposed to be independent of the player core code. For example, you
should be able to reuse the command parser code for some other part of
mpv. In practice, the variable containing command list is defined in the
player core anyway, so you could say this doesn't work. But I'm still
trying to hold onto this idea, so I went with void*.
The plan is to remove the command ID enum. This will happen by replacing
the big switch statement in command.c with dispatching to per-command
callbacks. As preparation, remove uses of the command IDs outside of the
actual dispatching mechanism.
Also remove some instances of checking cmd->def for NULL. We now require
this always to be set.
These are old MPlayer commands that were redundant since 2007 or so. In
2013, mpv explicitly deprecated them (actually removed them, but left
this wrapper, which translated them to modern commands). The list was
not extended since 2013, and mpv always warned on the terminal when a
legacy command was used. So it's time to remove it.
