With the recent addition of the libxpresent, it should improve frame
timings for most users. However, there were known cases of bad behavior
(Nvidia) which lead to a construction of a whitelist instead of just
enabling this all the time. Since there's no way to predict whatever
combination of hardware/drivers/etc. may work correctly, just give users
an option to switch the usage of xorg's presentation statistics on/off.
The default value, auto, works like before (basically, Mesa drivers and
no Nvidia are allowed), but now one can force it on/off if needed.
Now that a separate --cover-art-whitelist option exists, files like
cover.jpg are loaded even without setting --cover-art-auto to fuzzy, so
only load files that have exactly the media filename by default, since
fuzzy loading is probably more likely to load unwanted images than to
load cover art that the user intended to display, especially if you play
audio files with a short filename like a.mp3.
This allows more fine grained control over which cover art to load. With
--cover-art-auto=exact and --cover-art-whitelist=yes, you can now load
cover art with the exact media filename and the whitelisted filenames,
but not cover art that contains the media filename
(--cover-art-auto=fuzzy).
The video sync logic for mpv lies completely within its core at
essentially the highest layer of abstraction. The problem with this is
that it is impossible for VOs to know what video sync mode mpv is
currently using since it has no access to the opts. Because different
video sync modes completely changes how mpv's render loop operates, it's
reasonable that a VO may want to change how it renders based on the
current mode (see the next commit for an example).
Let's just move the video sync option to mp_vo_opts. MPContext, of
course, can still access the value of the option so it only requires
minor changes in player/video.c. Additionally, move the VS_IS_DISP
define from to player/core.h to common/common.h. All VOs already have
access to common/common.h, and there's no need for them to gain access
to everything that's in player/core.h.
The stop-screensaver option is currently limited to a simple yes/no
option. While the no option does always disable mpv trying to stop the
screensaver, yes does not mean the screensaver is always stopped. The
screensaver will be enabled again depending on certain conditions (like
if the player is paused). Simply introduce a new value for this option,
always, which does exactly what the name implies: the screensaver will
always be disabled.
This reverts commit 04f0b0abe4.
It's not a good idea to unify the names only for visibility, while
keeping secondary-* for everything else.
This needs a bit more thought before we allow secondary sub to be
visible on its own.
Adds --sub-visibility choices 'primary-only' for only displaying the
primary subtitle track, and 'secondary-only' for only displaying
secondary subtitle track.
Removes --secondary-sub-visibility and displays a message telling the
user to use --sub-visibility=yes/primary-only instead.
These changes make it so that the default 'sub-visibility' bind 'v'
cycles through all the 'sub-visibility' choices, 'no', 'yes',
'primary-only', and 'secondary-only'.
Using --sub-filter-regex-plain (default:no)
The ass-to-plaintext functionality already existed at sd_ass.c, but
it's internal and uses a private buffer type, so a trivial utility
wrapper was added with standard char*/bstr interface.
The plaintext can be multi-line, and the multi-line regexp flag is now
always set, but only affects plaintext (the ASS source is one line).
Pretty much identical to filter-regex but with JS expressions and
requires only JS support. Shares the filter-regex-* control options.
The target audience is Windows users - where filter-regex doesn't
work due to missing APIs, but mujs builds cleanly on Windows, and JS
is usually enabled in 3rd party Windows mpv builds.
Lua could have been used with similar effort, however, the JS regex
syntax is more extensive and also much more similar to POSIX.
Let audio-display determine whether embedded images or external cover
art tracks should be selected when both are present.
Attached pictures are given priority by default as requested in #8539.
Also updates references to attached pictures in the log and manpage to
refer to cover art as well.
Closes#8539.
This allows configuring which options are saved by quit-watch-later.
Fixes#4126, #4641 and #5567.
Toggling a video or audio filter twice would treat the option as changed
because the backup value is NULL, and the current value of vf/af is a
list with one empty item, so obj_settings_list_equal had to be changed.
Not sure what I was on when I wrote this. wayland-app-id is supposed to
default to "mpv". Just set that in the vo_sub_opts and don't do this
weird m_config_cache_write_opt thing. Also make the doc entry nicer.
This fixes a long-standing apparent issue where mpv would display the last
frame with no subtitles at EOF. This is caused by sub rendering switching from
video timestamps to audio timestamps when the video ends, and audio streams
often running past the timestamp of the last video frame. However, authoring
tools (most notably Aegisub) don't tend to provide easy ways to add meaningful
subtitles after the end of the video, so this is rarely actually useful.
This makes cover-art-auto behave more like sub-auto and audio-file-auto:
- load cover art with a language, e.g. if playing foo.mp3, foo.en.jpg
will be loaded with lang=en
- load cover art containing the media filename with fuzzy and all, e.g.
'foo (large).jpg'
- make all/2 load all images in the directory, and make fuzzy/1 the
default
These are all uncommon use cases, but synchronizing the behavior of the
external file options simplifies the code.
This is the Vulkan equivalent of the drm context for OpenGL, with
the big difference that it's implemented purely in terms of Vulkan
calls and doesn't actually require drm or kms.
The basic idea is to identify a display, mode, and plane on a device,
and then create a display backed surface for the swapchain. In theory,
past that point, everything is the same, and this is in fact the case
on Intel hardware. I can get a video playing on a vt.
On nvidia, naturally, things don't work that way. Instead, nvidia only
implemented the extension for scenarios where a VR application is
stealing a display from a running window system, and not for
standalone scenarios. With additional code, I've got this scenario to
work but that's a separate incremental change.
Other people have tested on AMD, and report roughly the same behaviour
as on Intel.
Note, that in this change, the VT will not be correctly restored after
qutting. The only way to restore the VT is to introduce some drm
specific code which I will illustrate in a separate change.
The accurate description of this option was:
- fit-border is enabled by default. When disabled, it adds a bug where
if the window has borders and mpv shrinks it to fit the desktop, then
the calculation ignores the borders and adds incorrect video crop.
The option was added at commits 70f64f3c and 949247d6, in order to
solve an issue (#2935) where if mpv wanted to display a video with
size WxH, then w32_common.c incorrectly set the window to WxH, while
down-scaling the video slightly to fit (even with small sizes).
It was addressed with a new option which is enabled by default, but
does the right thing (sets the client area to WxH) only when disabled,
so that everyone who prefers their video slightly downscaled could
keep their default behavior.
(#2935 also addressed an off-by-one issue, fixed before fit-border)
While disabling the option did avoid unnecessary downscaling, it also
added a bug when disabled: the borders are no longer taken into
account when the size is too big for the desktop. Most users don't
notice and are unaffected as it's enabled by default.
Shortly later (981048e0) the core issue is fixed, and now the client
area is correctly set to WxH instead of the window (and together with
the three following commits which center the video, adds a new bug
where the window title can be outside the display - addressed next).
However, fit-border remained, now without any effect, except that it
still has the same bug when disabled and the window is too big.
Later code changes and refactoring preserved this issue with great
attention to details, and it remained in identical form until now.
Simply rip out fit-border.
Simple groundwork for adding a couple of user options that allow
selecting the screen with a string name. The next two commits implements
these options for xorg and wayland.
This reverts commit 3d17e19c2c.
The effect of turning off this setting is that mpv doesn't tell libass what
the video stream's resolution is. This happens to result in some files having
their transforms scaled in ways that give higher performance (as described
in #7435) because libass happened to guess a video resolution that resulted
in transforms yielding smaller bitmaps, but it's just as easy for the opposite
to happen depending on the resolutions and effects involved.
The option's name is also somewhat misleading: setting the storage size affects
blur, but it also affects stroke (which is far more important for the vast
majority of scripts) and 3D transforms (which look very screwy when done wrong).
Picks up files like "cover.jpg". It's made part of normal external file
loading, so I'm adding 3 new options that are direct equivalents for the
options that control loading of external subtitle and audio files. Even
though I bet nobody wants them and they just increase confusion... I
guess the world is actually hell, so this outcome should be fine.
It prefers non-specific external files like "cover.jpg" over embedded
cover art. Not sure if that's wanted or unwanted.
There's some pain over explicitly marking such files as external
pictures. This is basically an optimization: in most cases, a heuristic
would treat an image file loaded with --external-file the same (it's a
heuristic because ffmpeg can't tell us whether something is an image or
a video). However, even with this heuristic, it would decode the cover
art picture again on each seek, which would essentially slow down
seeking in audio files. This bothered me greatly, which is why I'm
adding these additional options at all, and bothered with the previous
commit.
Fixes: #3056
on macOS 10.15 setting the activation policy behaves quite weirdly. the
call changes the current active App to a nameless process, which
probably also the reason that prevents the not focusing to work.
a workaround for that, is to refocus the previous active app.
Fixes#7725
This allows users to control whether full dialogue subtitles are displayed
with an audio track already in their preferred subtitle language.
Additionally, this improves handling for the forced flag, automatically
selecting between forced and unforced subtitle streams based on the user's
settings and the selected audio.
Seems like this is requested all the time.
It seems libass allows out of range values, but does allows the subtitle
to go out of the screen at the bottom (only when moving it to the top
it's "clamped"). Too bad, don't do that then. The bitmap sub rendering
code on the other hand is under our control, and will not move a
subtitle out of the screen.
Fixes: #7986
Options like --sub-ass-force-style and others could not be changed at
runtime (the changes didn't take any effect). Fix this by using the
brutal approach, and completely reinit the subtitle state when this
happens. Maybe a bit clunky, but for now I'd rather not put more effort
into this.
Fixes: #7689
This is taken from a somewhat older proof-of-concept script. The basic
idea, and most of the implementation, is still the same. The way the
profiles are actually defined changed.
I still feel bad about this being a Lua script, and running user
expressions as Lua code in a vaguely defined environment, but I guess as
far as balance of effort/maintenance/results goes, this is fine.
It's a bit bloated (the Lua scripting state is at least 150KB or so in
total), so in order to enable this by default, I decided it should
unload itself by default if no auto-profiles are used. (And currently,
it does not actually rescan the profile list if a new config file is
loaded some time later, so the script would do nothing anyway if no auto
profiles were defined.)
This still requires defining inverse profiles for "unapplying" a
profile. Also this is still somewhat racy. Both will probably be
alleviated to some degree in the future.
This simply printf()s a concatenation of the provided string and the
relevant escape sequences. No idea what exactly defines this escape
sequence (is it just a xterm thing that is now supported relatively
widely?), and this simply uses information provided on the linked github
issue.
Not much of an advantage over --term-status-msg, though at least this
can have a lower update frequency. Also I may consider setting a default
value, and then it shouldn't conflict with the status message.
Fixes: #1725
Can be useful to force it to adapt to extreme speed changes, while a
higher limit would just use a fraction closer to the original video
speed.
Probably useful for testing only.
Apparently, this was a bit of a mess, which caused the bug fixed by
commit ec7f2388af. Try to improve this, and only use track selection
entries that exist.
These used ".min = MP_NOPTS_VALUE" to indicate certain exceptions. This
broke with the recent change to how min/max are handled, which made
setting min or max mean that a value range is used, thus setting max=0.
Fix this by not using magic a value in .min; replace it with a proper
flag.
Fixes: #7596
While --input-file was removed for justified reasons, wanting to pass
down socket FDs this way is legitimate, useful, and easy to implement.
One odd thing is that
Fixes: #7592
Change all OPT_* macros such that they don't define the entire m_option
initializer, and instead expand only to a part of it, which sets certain
fields. This requires changing almost every option declaration, because
they all use these macros. A declaration now always starts with
{"name", ...
followed by designated initializers only (possibly wrapped in macros).
The OPT_* macros now initialize the .offset and .type fields only,
sometimes also .priv and others.
I think this change makes the option macros less tricky. The old code
had to stuff everything into macro arguments (and attempted to allow
setting arbitrary fields by letting the user pass designated
initializers in the vararg parts). Some of this was made messy due to
C99 and C11 not allowing 0-sized varargs with ',' removal. It's also
possible that this change is pointless, other than cosmetic preferences.
Not too happy about some things. For example, the OPT_CHOICE()
indentation I applied looks a bit ugly.
Much of this change was done with regex search&replace, but some places
required manual editing. In particular, code in "obscure" areas (which I
didn't include in compilation) might be broken now.
In wayland_common.c the author of some option declarations confused the
flags parameter with the default value (though the default value was
also properly set below). I fixed this with this change.
The option code is very old and was added to MPlayer in the early 2000s,
when C99 was still new. MPlayer did not use the "bool" type anywhere,l
and the logical option equivalent to bool, the "flag" option type, used
int, with the convention that only the values 0 and 1 are allowed.
mpv may have hammered many, many additional tentacles to the option
code, but some of the basics never changed, and m_option_type_flag still
uses int. This seems a bit weird, since mpv uses bool for booleans. So
finally introduce an m_option_type_bool. To avoid duplicating too much
code, change the flag code to bool, and "reimplement" m_option_type_flag
on top of m_option_type_bool.
As a "demonstration", change the --fullscreen option to this new type.
Ideally, all options would be changed too bool, and m_option_type_flag
would be removed. But that is a lot of monotonous thankless work, so I'm
not doing it, and making it a painful years long transition.
At the same time, I'm introducing a new concept for option declarations.
Instead of OPT_BOOL(), which define the full m_option struct contents,
there's OPTF_BOOL(), which only takes the option field name itself. The
name is provided via a normal struct field initializer. Other fields
(such as flags) can be provided via designated initializers.
The advantage of this is that we don't need tons of nested vararg
macros. We also don't need to deal with 0-sized varargs being a pain
(and in fact they are not a thing in standard C99 and probably C11).
There is no need to provide a mandatory flags argument either, which is
the reason why so many OPT_ macros are used with a "0" argument. (The
flag argument seems to confuse other developers; they either don't
immediately recognize what it is, and sometimes it's supposed to be the
option's default value.)
Not having to mess with the flag argument in such option macros is also
a reason for the removal of M_OPT_RANGE etc., for the better or worse.
The only place that special-cased the _flag option type was in
command.c; change it to use something effectively very similar that
automatically includes the new _bool option type. Everything else should
be transparent to the change. The fullscreen option change should be
transparent too, as C99 bool is basically an integer type that is
clamped to 0/1 (except in Swift, Swift sucks).
Before this commit, option declarations used M_OPT_MIN/M_OPT_MAX (and
some other identifiers based on these) to signal whether an option had
min/max values. Remove these flags, and make it use a range implicitly
on the condition if min<max is true.
This requires care in all cases when only M_OPT_MIN or M_OPT_MAX were
set (instead of both). Generally, the commit replaces all these
instances with using DBL_MAX/DBL_MIN for the "unset" part of the range.
This also happens to fix some cases where you could pass over-large
values to integer options, which were silently truncated, but now cause
an error.
This commit has some higher potential for regressions.
