Fixes#4626. Previously removed because the original smi entry was added
by someone who did not agree to LGPL relicensing. I'm not sure if the
original change was copyrightable, but this commit for sure does not
fall under that author's copyright.
Can be enabled via --vd-lavc-dr=yes. See manpage additions for what it
does.
This reminds of the MPlayer -dr flag, but the implementation is
completely different. It's the same basic concept: letting the decoder
render into a GPU buffer to avoid a copy. Unlike MPlayer, this doesn't
try to go through filters (libavfilter doesn't support this anyway).
Unless a filter can work in-place, DR will be silently disabled. MPlayer
had very complex semantics about buffer types and management (which
apparently nobody ever understood) and weird restrictions that mostly
limited it to mpeg2 style codecs. The mpv code does not do any of this,
and just lets the decoder allocate an arbitrary number of untyped
images. (No MPlayer code was used.)
Parts of the code based on work by atomnuker (starting point for the
generic code) and haasn (some GL definitions, some basic PBO code, and
correct fencing).
It used to use the "encoding" section. Change this to the default
section to remove another small special case. encoding-profiles.conf
didn't use this by default anyway. The previous revert could mitigate
potential impacts of this a little.
This reverts commit 0dcb51c7fa.
I randomly decided that this was better. It can be re-applied once it
actually becomes necessary in some way.
Note that this worked fine. My main gripe with this is that it can
spam the log file with encoding stuff even if playback mode is used.
This is more of a niche usecase than --ytdl-format and --ytdl-raw-options,
so a simple script option should be enough.
Either create lua-settings/ytdl_hook.conf with
'exclude=example.com,sub.example.com' option or
"--script-opts=ytdl_hook-exclude=example.com,sub.example.com"
Remove the various redundant m_config_set_option* calls, rename the
remaining one to m_config_set_option_cli(), and merge the
m_config_parse_option() function.
This replaces `vo-performance` by `vo-passes`, bringing with it a number
of changes and improvements:
1. mpv users can now introspect the vo_opengl passes, which is something
that has been requested multiple times.
2. performance data is now measured per-pass, which helps both
development and debugging.
3. since adding more passes is cheap, we can now report information for
more passes (e.g. the blit pass, and the osd pass). Note: we also
switch to nanosecond scale, to be able to measure these passes
better.
4. `--user-shaders` authors can now describe their own passes, helping
users both identify which user shaders are active at any given time
as well as helping shader authors identify performance issues.
5. the timing data per pass is now exported as a full list of samples,
so projects like Argon-/mpv-stats can immediately read out all of the
samples and render a graph without having to manually poll this
option constantly.
Due to gl_timer's design being complicated (directly reading performance
data would block, so we delay the actual read-back until the next _start
command), it's vital not to conflate different passes that might be
doing different things from one frame to another. To accomplish this,
the actual timers are stored as part of the gl_shader_cache's sc_entry,
which makes them unique for that exact shader.
Starting and stopping the time measurement is easy to unify with the
gl_sc architecture, because the existing API already relies on a
"generate, render, reset" flow, so we can just put timer_start and
timer_stop in sc_generate and sc_reset, respectively.
The ugliest thing about this code is that due to the need to keep pass
information relatively stable in between frames, we need to distinguish
between "new" and "redrawn" frames, which bloats the code somewhat and
also feels hacky and vo_opengl-specific. (But then again, this entire
thing is vo_opengl-specific)
This takes car eof unsubtle bugs if something at init does not work
(specifically if mp_new_client() returns NULL). It also removes the need
for that PMP MF hack.
In a bunch of cases, we emulate highly platform specific APIs on a
higher level across all OSes, such as IPC, terminal, subprocess
handling, and more. We have source files for each OS, and they implement
all the same mpv internal API.
Selecting which source file to use on an OS can be tricky, because there
is partially overlapping and emulated APIs (consider Cygwin on Windows).
Add a pick_first_matching_dep() function to make this slightly easier
and more structured.
Also add dummy backends in some cases, to deal with APIs not being
available.
Clarify the Windows dependency identifiers, as these are the most
confusing.
This affects options like --vf or --display-tags. These used a "*"
suffix to match all options starting with a specific name, and handled
the rest in the option parser. Change this to remove the "*" special
case, and require every option parser to declare a list of allowed
suffixes via m_option_type.actions.
The new way is conceptually simpler, because we don't have to account
for the "*" in a bunch of places anymore, and instead everything is
centrally handled in the CLI part of the option parser, where it's
actually needed.
It automatically enables suffixes like -add for a bunch of other
stringlist options.
This makes things like --show-profile=enc-v-h264 just work again.
Currently I don't see a reason why we should not always load the
encoding profiles. Although I guess this used to be different in the
past. (It probably won't take long until I revert this again - seems
like a fight you can't win for some reason.)
Fixes#4551.
These files have all in common that they were fully or mostly taken from
mplayer.c. (mplayer.c was a huge file that contains almost all of the
playback core, until it was split into multiple parts.) This was
probably the hardest part to relicense, because so much code was moved
around all the time.
player/audio.c still does not compile. We'll have to redo audio
filtering. Once that is done, we can probably actually provide an
actual LGPL configure switch.
Here is a relatively detailed list of potential issues:
8d190244: author did not reply, parts were made GPL-only in a previous
commit.
7882ea9b: author could not be reached, but the code is gone. wscript
still has --datadir switch, but I don't think this is relevant to
copyright.
f197efd5: unclear origin, but I consider the code gone anyway (replaced
with generic OSD mechanisms).
8337d9c2: author did not reply, but only the option still exists (under
a different name), other code was removed.
d8fd7131: did not reply. Disabled in a previous commit.
05258251: same author as above. Both fields actually seem to have
vanished (even when tracking renames), so no action taken.
d459e644, 268b2c1a: author did not reply, but we reuse only the options
(with different names and slightly or fully different semantics, and
completely different implementations), so I don't think this is relevant
for copyright.
09e742fe, 17c39c4e: same as above.
e8a173de, bff4b3ee: author could not be reached. The commands were
reworked to properties, and the code outside of the TV code were moved
back to the TV code. So I don't think copyright applies to the current
command.c parts (mp_property_tv_color, mp_property_tv_freq,
mp_property_tv_scan). The TV parts remain GPL.
0810e427: could not be reached. Disabled in a previous commit.
43744a2d: unknown author, but this was replaced by dynamic alloc (if the
change is even copyrightable).
116ca0c7: unknown author; reasoning see input.c relicensing commit.
e7e4d1d8: these semantics still exist, but as generic code, and this
code was fully removed.
f1175cd9: the author of the cited patch is unknown, and upon inspection
it turns out that I was only using the idea to pause the player on EOF,
so I claim it's not copyright relevant.
25affdcc: author could not be reached (yet) - but it's only a function
rename, not copyrightable.
5728504c was committed by Arpi (who agreed), but hints that it might be
by a different author. In fact it seems to be mostly this patch:
http://lists.mplayerhq.hu/pipermail/mplayer-dev-eng/2001-November/002041.html
The author did not respond, but it all seems to have been removed later.
It's a terrible mess though. Arpi reverted the A-V sync code at first,
but left the RTC code for a while. The following commits remove these
changes 100%: 14b35442, 7181a091, 31482783, 614f8475, df58e822.
cehoyos did explicitly not agree to LGPL, but was involved in the
following changes:
c99d8fc8: applied a patch and didn't modify it, the original author
agreed.
40ac0d31: author could not be reached, but all code is gone anyway. The
"af" command has a similar function, but works completely different and
actually reuses a mechanism older than this patch.
54350436: applied a patch, but didn't modify it, except for adding a
German translation, which was removed later.
a2dda036: same situation as above
240b743e: this was made GPL-only in a previous commit
7b25afd7: same as above (for now)
kirijua could not be reached, but was a regular patch contributor:
c2c997fd: video equalizer code move; probably not copyrightable. Is GPL
due to Nick anyway.
be54f481: technically, this became the audio track property later. But
all what is left is the fact that you pass a track ID to it, so consider
the original coypright non-relevant.
2f376d1b: this was rewritten in b7052b43, but for now we can afford to
be careful, so this was marked as GPL only in a previous commit.
43844d09: remaining parts in main.c were reverted in a previous commit.
anders has mostly disagreed with the LGPL relicensing. Does not want
libaf to become LGPL, but made some concessions. In particular, he
granted us permission to relicense 4943e9c52c and 242aa6ebd4. We also
consider some of his changes remaining in mpv not relevant for copyright
(such as 735de602 - we won't remove the this option completely). We will
completely remove his other contributions, including the entire audio
filter chain. For now, this stuff is marked as GPL only. The remaining
question is how much code in player/audio.c (based on the former
mplayer.c and dec_audio.c) is under his copyright. I made claims about
this in a previous commit.
Nick(ols) Kurshev, svn username "nick" and "nickols_k", could not be
reached. He had a lot of changes in early MPlayer. It seems all of that
was removed, at least in mpv. His main work, like VIDIX or libswscale
work, does not exist in mpv anymore, but the changes to mplayer.c and
other core parts still deserve attention:
a4119f6b, fb927549, ad3529b8, e11b23dc, 5f2178be, 93c371d5: removed in
b43d67e0, d1628d12, 24ed01fe, df58e822.
0a83c6ec, 104c125e, 4e067f62, aec5dcc8, b587a3d6, f3de6e6b: DR, VAA, and
"tune" stuff was fully removed later on or replaced with other
mechanisms.
340183b0: screenshots were redone later (the VOCTRL was even removed,
with an independent implementation using the same VOCTRL a few years
later), so not relevant anymore. Basically only the 's' shortcut remains
(but not its implementation).
92c5c274, bffd4007, 555c6766: for now marked as GPL only in a previous
commit.
Might contain some trace amounts of "michael"'s copyright, who agreed to
LGPL only once the core is relicensed. This will still be respected, but
I don't think it matters at this in this case. (Some code touched by him
was merged into mplayer.c, and then disappeared after heavy
refactoring.)
I tried to be as careful and as complete as possible. It can't be
excluded that amends to this will be made later.
This does not make the player LGPL yet.
"anders" has not agreed to relicense most of his changes (although he
gave permission for 4943e9c52c and 242aa6ebd4).
Note that commit 3053a8b7f is in part also affected. The commit message
hides this, but it seems some code was based on anders':
http://mplayerhq.hu/pipermail/mplayer-dev-eng/2002-October/011773.html
Much of the final commit was by Arpi, but it's still grating that there
was no proper attribution (and in a case that turned out to be so
important).
This means player/audio.c won't even compile (and other parts of the
player also use audio/audio.h, which is still GPL). But whether the end
result compiles doesn't matter for copyright.
Due to the heavy refactoring applied over the year, the boundaries are
rather fuzzy and also somewhat arbitrary, though.
Most of this code will have to be replaced with a new filter chain
later.
I think the idea is that you can pass multiple help options on the
command line, and it will print them all, instead of printing only the
first one and exiting. This was added in commit 43844d09, but the patch
author could not be reached. Revert it, as it's not a critical feature.
This was added in 0810e4275. The patch author did not reply (yet). Not
sure if copyrightable, but I'm making the still existing C part GPL-only
for now (in a previous commit).
Commit d8fd7131 changes this. "tibcu" did not reply. While I'm not sure
whether copyrightable code remains, I'd tend towards saying yes (the
basic idea is still intact after years of refactoring), so make it
GPL-only for now.
Nick and kiriuja could not be reached, and created/changed this in
92c5c274, 6441a5ad, bffd4007, 555c6766, c2c997fd. The video equalizer
stuff was redone fully later, but there are still parts that look too
similar and basically use the same approach. I'm more comfortable with
declaring it GPL only for now.
I plan to redo them later in a way that will remove copyright.
cehoyos has not agreed to the LGPL relicensing. He added the deinterlace
property in commit 7b25afd7. Make it GPL-only for now. The still working
parts of the --deinterlace option are not affected by his copyright.
It was extended by "seru" in 8d190244. This person could not be reached
(or does not reply), and it's in the way of LGPL relicensing. Deprecate
it, and mark the (probably) affected parts of the code with HAVE_GPL. To
be fair, even though the osd.c parts were refactored from the original
code, there's probably no copyright by seru on it. But for now play it
save. The mere existence of a 3rd OSD level is certainly not
copyrightable, so you still can set osd-level to 3 - just that it does
nothing.
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
While we could easily ifdef-out this file for a LGPL core, it's still
annoying, and also the only GPL file remaining in player/ that is not
based on mplayer.c.
This file originates from subreader.c. It's not clear whether the
original author of it gave us permission to relicense to LGPL (he
probably did, but without further clarification it's sort of ambiguous),
but the subtitle file search code was written by other authors anyway
(see 7eef93819f).
One contribution (574eb892ea) is a bit of a corner case, as
test_ext_list() now does a bstrcasecmp(). But I don't think the
copyright remains here. (I asked the author anyway, just in case. But
I didn't wait for the answer.)
In some other cases, contributors who could not be reached added some
subtitle extensions. I don't think those are copyrightable on their own,
but I dropped them anyway just to be sure.
This is more uniform, and potentially gets rid of some past copyrights.
It might be that this subtly changes caching behavior (it seems before
this, it synced to the demuxer if the length was unknown, which is not
what we want.)
cehoyos adds the step_property command in 7a71da01d, and it could be
argued that copyright of this still applies to the later add/cycle
commands (a668ae0ff9). While I'm not sure if this is really the case,
stay conservative for now and mark these commands as GPL-only. Mark the
command.c code too, although that is not being relicensed yet.
I'm leaving the MP_CMD_* enum items, as they are obviously different.
In commit 116ca0c768, "veal" (essentially an anonymous author) adds an
"osd_show_property_text" command (well, the commit message says "based
on" that person's code, so it's not clear how much is from him or from
albeu, who agreed to LGPL). This was later merged again with the
"osd_show_text" command, and then all original code was removed in
commit 58cc0f637f, so I claim that no copyright applies anymore. (Though
technically the input.conf addition still might be copyrighted, so I'm
just dropping it to get rid of the thought.)
"kiriuja" added 2f376d1b39 (sub_load etc.) and be54f4813 (switch_audio).
The latter is gone. I would argue that the former is fully rewritten
with commits b7052b431c and 0f155921b0. But like in the step_property
case, I will be overly conservative for now, and mark them as GPL-only,
as this is potentially shaky and should be thought through first. (Not
bothering with the command define/enum in the header, as it will be
unused in LGPL mode anyway.)
keycodes.c/h can be GPL, except for commit 2b1f95dcc2, which is a
patch by someone who wasn't asked yet. Before doing something radical, I
will wait for a reply.
Choosing the seek direction for MPSEEK_FACTOR based on the location of
seek_pts is nonsense, and can cause the seek position to oscillate
between adjacent keyframes, such as when dragging the OSC bar on short
videos.
Fix this by always seeking backward for type MPSEEK_FACTOR, i.e. seek
to the keyframe for the group of pictures (GOP) in which seek_pts is
located.
Fixes#4183.
Signed-off-by: wm4 <wm4@nowhere>
This introduces (yet another..) mp_colorspace members, an enum `light`
(for lack of a better name) which basically tells us whether we're
dealing with scene-referred or display-referred light, but also a bit
more metadata (in which way is the scene-referred light expected to be
mapped to the display?).
The addition of this parameter accomplishes two goals:
1. Allows us to actually support HLG more-or-less correctly[1]
2. Allows people playing back direct “camera” content (e.g. v-log or
s-log2) to treat it as scene-referred instead of display-referred
[1] Even better would be to use the display-referred OOTF instead of the
idealized OOTF, but this would require either native HLG support in
LittleCMS (unlikely) or more communication between lcms.c and
video_shaders.c than I'm remotely comfortable with
That being said, in principle we could switch our usage of the BT.1886
EOTF to the BT.709 OETF instead and treat BT.709 content as being
scene-referred under application of the 709+1886 OOTF; which moves that
particular conversion from the 3dlut to the shader code; but also allows
a) users like UliZappe to turn it off and b) supporting the full HLG
OOTF in the same framework. But I think I prefer things as they are
right now.
List of changes:
1. Kill nom_peak, since it's a pointless non-field that stores nothing
of value and is _always_ derived from ref_white anyway.
2. Kill ref_white/--target-brightness, because the only case it really
existed for (PQ) actually doesn't need to be this general: According
to ITU-R BT.2100, PQ *always* assumes a reference monitor with a
white point of 100 cd/m².
3. Improve documentation and comments surrounding this stuff.
4. Clean up some of the code in general. Move stuff where it belongs.
The option->property bridge can't (and shouldn't) preserve option flags.
This is a problem if the flags are actually used by the option
implementation, beyond calling m_config_mark_co_flags().
This was true so far, but b8193e4071 changed this. Now setting the
--profile option (usually from a config file or as recursive profile)
can have side-effects that depend on the flags contents. Solve this by
avoiding going through the "double bridge" altogether.
This fixes a regression if an auto-profile is active, and the user
specifies an option on the command line that is supposed to override an
item in a profile recursively referenced by the auto-profile. The
command line option will not override it, because the auto-profile is
set later, and during application of the auto-profile, the
M_SETOPT_PRESERVE_CMDLINE flag gets lost.
Having to add something to m_property is not nice, and I'll probbaly
regret later. On the other hand, there is a chance that this helps
towards true option/property unification.
Before this, options with co->data==NULL (i.e. no storage) were not
added to the bridge (except alias options). There are a few options
which might make sense to allow via the bridge ("profile" and
"include"). So allow them.
In command_init(), we merely remove the co->data check, the rest of the
diff is due to switching the if/else branches for convenience.
We also must explicitly error on M_PROPERTY_GET if co->data==NULL. All
other cases check it in some way.
Explicitly exclude options from the property bridge, which would be
added due this, and the result would be pointless.
Implements JS with almost identical API to the Lua support.
Key differences from Lua:
- The global mp, mp.msg and mp.utils are always available.
- Instead of returning x, error, return x and expose mp.last_error().
- Timers are JS standard set/clear Timeout/Interval.
- Supports CommonJS modules/require.
- Added at mp.utils: getenv, read_file, write_file and few more.
- Global print and dump (expand objects) functions.
- mp.options currently not supported.
See DOCS/man/javascript.rst for more details.
