Following commit 84ccebd9, the internal helpers don't allow GL_RGB and
GL_RGBA as internal formats for FBO attachments anymore.
While OpenGL itself is perfectly fine with it, I don't see much of a
reason to bother, and mixing sized and unsized internal formats is
confusing anyway.
Just remove these formats.
This is now a configurable option, with tunable parameters.
I got inspiration for these algorithms off wikipedia. "simple" seems to
work pretty well, but not well enough to make it a reasonable default.
Some other notable candidates:
- Local functions (e.g. based on local contrast or gradient)
- Clamp with soft knee (linear up to a point)
- Mapping in CIE L*Ch. Map L smoothly, clamp C and h.
- Color appearance models
These will have to be implemented some other time.
Note that the parameter "peak_src" to pass_tone_map should, in
principle, be auto-detected from the SEI information of the source file
where available. This will also have to be implemented in a later
commit.
Currently, this relies on the user manually entering their display
brightness (since we have no way to detect this at runtime or from ICC
metadata). The default value of 250 was picked by looking at ~10 reviews
on tftcentral.co.uk and realizing they all come with around 250 cd/m^2
out of the box. (In addition, ITU-R Rec. BT.2022 supports this)
Since there is no metadata in FFmpeg to indicate usage of this TRC, the
only way to actually play HDR content currently is to set
``--vf=format=gamma=st2084``. (It could be guessed based on SEI, but
this is not implemented yet)
Incidentally, since SEI is ignored, it's currently assumed that all
content is scaled to 10,000 cd/m^2 (and hard-clipped where out of
range). I don't see this assumption changing much, though.
As an unfortunate consequence of the fact that we don't know the display
brightness, mixed with the fact that LittleCMS' parametric tone curves
are not flexible enough to support PQ, we have to build the 3DLUT
against gamma 2.2 if it's used. This might be a good thing, though,
consdering the PQ source space is probably not fantastic for
interpolation either way.
Partially addresses #2572.
This macro takes care of rotation, swizzling, integer conversion and
normalization automatically. I found the performance impact to be
nonexistant for superxbr and debanding, although rotation *did* have an
impact due to the extra matrix multiplication. (So it gets skipped where
possible)
All of the internal hooks have been rewritten to use this new mechanism,
and the prescaler hooks have finally been separated from each other.
This also means the prescale FBO kludge is no longer required.
This fixes image corruption for image formats like 0bgr, and also fixes
prescaling under rotation. (As well as other user hooks that have
orientation-dependent access)
The "raw" attributes (tex, tex_pos, pixel_size) are still un-rotated, in
case something needs them, but ideally the hooks should be rewritten to
use the new API as much as possible. The hooked texture has been renamed
from just NAME to NAME_raw to make script authors notice the change (and
also deemphasize direct texture access).
This is also a step towards getting rid of the use_integer pass.
This replaces the previous TRANSFORM by WIDTH, HEIGHT and OFFSET where
WIDTH and HEIGHT are RPN expressions. This allows for more fine-grained
control over the output size, and also makes sure that overwriting
existing textures works more cleanly.
(Also add some more useful bstr functions)
This allows users to add their own near-arbitrary hooks to the vo_opengl
processing pipeline, greatly enhancing the flexibility of user shaders.
This enables, among other things, user shaders such as CrossBilateral,
SuperRes, LumaSharpen and many more.
To make parsing the user shaders easier, shaders are now loaded as
bstrs, and the hooks are set up during video reconfig instead of on
every single frame.
Some of this documentation was left woefully inaccurate as color
management in mpv evolved. This commit updates all of the wording and
adds notes and comments where appropriate.
First of all, black point compensation is now on by default. This is
really rather harmless and only improves the result (where "improvement"
means "less black clipping").
Second, this adds an option to limit the ICC profile's contrast, which
helps for untagged matrix profiles that are implicitly black scaled even
in colorimetric intent. (Note that this relies on BPC being enabled to
work properly, which is why the two changes are tied together)
Third, this uses the LittleCMS built in black point estimator instead of
relying on the presence of accurate A2B tables. This also checks tags
and does some amounts of noise elimination.
If the option is unspecified and the profile is missing black point
information, print a warning instructing the user to set the option, and
fall back to 1000 otherwise.
This gives us 16 bit fixed-point integer texture formats, including
ability to sample from them with linear filtering, and using them as FBO
attachments.
The integer texture format path is still there for the sake of ANGLE,
which does not support GL_EXT_texture_norm16 yet.
The change to pass_dither() is needed, because the code path using
GL_R16 for the dither texture relies on glTexImage2D being able to
convert from GL_FLOAT to GL_R16. GLES does not allow this. This could be
trivially fixed by doing the conversion ourselves, but I'm too lazy to
do this now.
This colorspace has been historically used as a calibration target for
most digital projectors and sees some involvement in the UltraHD
standards, so it's a useful addition to mpv.
Since prescale now literally only affects the luma plane (and the
filters are all designed for luma-only operation either way), the option
has been renamed and the documentation updated to clarify this.
GLES does not support high bit depth fixed point textures for unknown
reasons, so direct 10 bit input is not possible. But we can still use
integer textures, which are supported by GLES 3.0. These store integer
data just like the standard fixed point textures, except they are not
normalized on sampling. They also don't support bilinear filtering, and
require a special sampler ("usampler2D").
While these texture formats enable us to shuffle the data to the GPU,
they're rather impractical with the requirements mentioned above and our
current architecture. One problem is that most code assumes it can
always use bilinear scaling (even if bilinear is never used when using
appropriate scale/cscale options). Another is that we don't have any
concept of running a function on a texture in an uniform way.
So for now, run a simple conversion step through a FBO. The FBO will use
the rgba16f format normally, which gives enough bits for 10 bit, and
will at least gracefully degrade with higher depth input.
This is bound to be much slower than a more "direct" method, but at
least it works and is simple to implement.
The odd change of function call order in init_video() is to properly
disable "dumb mode" (no FBO use) if these texture formats are in use.
Often requested. The main argument, that prominent scalers like sharpen
change the image even if no scaling happens, disappeared anyway.
("sharpen", unsharp masking, is neither prominent nor a scaler anymore.
This is an artifact from MPlayer, which fuses unsharp masking with
bilinear scaling in order to make it single-pass, or so.)
Add a "blend-tiles" choice to the "alpha" sub-option. This is pretty
simplistic and uses the GL raster position to derive the tiles. A weird
consequence is that using --vo=opengl and --vo=opengl-hq gives different
scaling behavior (screenspace pixel size vs. source video pixel size
16x16 tiles), but it seems we don't have easy access to the original
texture coordinates. Using the rasterpos is probably simpler.
Make this option the default.
WGL_NV_DX_interop is widely supported by Nvidia and AMD drivers. It
allows a texture to be shared between Direct3D and WGL, so that
rendering can be done with WGL and presentation can be done with
Direct3D. This should allow us to work around some persistent WGL
issues, such as dropped frames with some driver/OS combos, drivers that
buffer frames to increase performance at the cost of latency, and the
inability to disable exclusive fullscreen mode when using WGL to render
to a fullscreen window.
The addition of a DX_interop backend might also enable some cool
Direct3D-specific enhancements in the future, such as using the
GetPresentStatistics API to get accurate frame presentation timestamps.
Note that due to a driver bug, this backend is currently broken on
Intel. It will appear to work as long as the window is not resized too
often, but after a few changes of size it will be unable to share the
newly created renderbuffer with GL. See:
https://software.intel.com/en-us/forums/graphics-driver-bug-reporting/topic/562051
It turns out that with accurate lookup we can decrease the
default size of texture now. Do it to compensate the performance
loss introduced by the LUT_POS macro.
This adds basic support for ICC profiles. Per-monitor profiles are
supported. WCS profiles are not supported, but there is an API for
converting WCS profiles to ICC, so they might be supported in future.
I'm just not sure if anyone actually uses them.
Reloading the ICC profile when it's changed in the control panel is also
not supported. This might be possible by using the WCS APIs and watching
the registry for changes, but there is no official API for it, and as
far as I can tell, no other Windows programs can do it.
The OSD takes up an entire fullscreen dispmanx layer. Although the GPU
should be able to handle it (possibly even without any disadvantages),
it'll still be useful for debugging performance issues.
Running mpv with default config will now pick up ANGLE by default. Since
some think ANGLE is still not good enough for hq features, extend the
"es" option to reject GLES backends, and add to to the opengl-hq preset.
One consequence is that mpv will by default use libswscale to convert
10 bit video to 8 bit, before it reaches the VO.
I decided that I actually can't stand how vo_opengl unnecessarily puts
the video through 3 shader stages (instead of 1). Thus, what was meant
to be a fallback for weak OpenGL implementations, the dumb-mode, now
becomes default if the user settings allow it.
The code required to check for the settings isn't so wild, so I guess
it's manageable. I still hope that one day, our rendering logic can
generate ideal shader stages for this case too.
Note that in theory, dumb-mode could be reenabled at runtime due to a
color management 3D LUT being set, so a separate dumb_mode field is
required. The dumb-mode option can't just be overwritten.
vo_opengl_cb is a special case, because we somehow have to render video
asynchronously, all while "trusting" the API user to do it correctly.
This didn't quite work, and a while ago a compromise using a timeout to
prevent theoretically possible deadlocks was added.
Make it even more synchronous. Basically, go all the way, and
synchronize rendering between VO and user renderer thread to the
full extent possible.
This means the silly frame queue is dropped, and we event attempt to
synchronize the GL SwapBuffer call (via mpv_opengl_cb_report_flip()).
The changes introduced with commit dc33eb56 are effectively dropped. I
don't even remember if they mattered.
In the future, we might make all VOs fetch asynchronously from a frame
queue, which would mostly remove the differences between vo_opengl and
vo_opengl_cb, but this will take a while (if it will even be done).
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
Implement NNEDI3, a neural network based deinterlacer.
The shader is reimplemented in GLSL and supports both 8x4 and 8x6
sampling window now. This allows the shader to be licensed
under LGPL2.1 so that it can be used in mpv.
The current implementation supports uploading the NN weights (up to
51kb with placebo setting) in two different way, via uniform buffer
object or hard coding into shader source. UBO requires OpenGL 3.1,
which only guarantee 16kb per block. But I find that 64kb seems to be
a default setting for recent card/driver (which nnedi3 is targeting),
so I think we're fine here (with default nnedi3 setting the size of
weights is 9kb). Hard-coding into shader requires OpenGL 3.3, for the
"intBitsToFloat()" built-in function. This is necessary to precisely
represent these weights in GLSL. I tried several human readable
floating point number format (with really high precision as for
single precision float), but for some reason they are not working
nicely, bad pixels (with NaN value) could be produced with some
weights set.
We could also add support to upload these weights with texture, just
for compatibility reason (etc. upscaling a still image with a low end
graphics card). But as I tested, it's rather slow even with 1D
texture (we probably had to use 2D texture due to dimension size
limitation). Since there is always better choice to do NNEDI3
upscaling for still image (vapoursynth plugin), it's not implemented
in this commit. If this turns out to be a popular demand from the
user, it should be easy to add it later.
For those who wants to optimize the performance a bit further, the
bottleneck seems to be:
1. overhead to upload and access these weights, (in particular,
the shader code will be regenerated for each frame, it's on CPU
though).
2. "dot()" performance in the main loop.
3. "exp()" performance in the main loop, there are various fast
implementation with some bit tricks (probably with the help of the
intBitsToFloat function).
The code is tested with nvidia card and driver (355.11), on Linux.
Closes#2230
Add the Super-xBR filter for image doubling, and the prescaling framework
to support it.
The shader code was ported from MPDN extensions project, with
modification to process luma only.
This commit is largely inspired by code from #2266, with
`gl_transform_trans()` authored by @haasn taken directly.
Enable it by default, but not unconditionally. Add an "auto" mode, which
disable DwmFlush if the compositor is (probably) inactive. Let's see how
this goes.
Since I accidentally enabled DwmFlush always by default (more or less)
in a previous commit touching this code, this is probably mostly just
cargo-culting, and it's uncertain whether it does anything.
Note that I still got bad vsync behavior when fullscreening mpv, and
making another window visible on the same screen. This happens even if
forcing DWM.
Yet another relatively useless option that tries to make OpenGL's sync
behavior somewhat sane. The results are not too encouraging. With a
value of 1, vsync jitter is gone on nVidia, but there are frame drops
(less than with glfinish). With 2, I get the usual vsync jitter _and_
frame drops.
There's still some hope that it might prevent too deep queuing with some
GPUs, I guess.
The timeout for the wait call is 1 second. The value is pretty
arbitrary; it should just not be too high to freeze the process (if
the GPU is un-nice), and not too low to trigger the timeout in normal
cases, even if the GPU load is very high. So I guess 1 second is ok
as a timeout.
The idea to use fences this way to control the queue depth was stolen
from RetroArch:
df01279cf3/gfx/drivers/gl.c (L1856)
It's great that the new algorithm supports multiple placebo iterations
and all, but it's really not necessary and hurts performance in the
general case for the sake of the 0.1% that actually pause the screen
and look for minute differences.
Signed-off-by: wm4 <wm4@nowhere>
This reverts commit d11184a256.
Unfortunately, there was a lot of unexpected resistance.
Do note that this is still extremely slow, crappy, etc.
Note that vo_x11.c was further edited. Compared to the removed vo_x11.c,
an additional ~200 lines of code was removed in order to simplify it. I
tried to strip it down as much as possible. In particular, support for
odd non-32 bit formats (24, 16, 15, 8 bit) is dropped.
Closes#2300.
This turns the old scalers (inherited from MPlayer) into a pre-
processing step (after color conversion and before scaling). The code
for the "sharpen5" scaler is reused for this.
The main reason MPlayer implemented this as scalers was perhaps because
FBOs were too expensive, and making it a scaler allowed to implement
this in 1 pass. But unsharp masking is not really a scaler, and I would
guess the result is more like combining bilinear scaling and unsharp
masking.
The removal of source-shader is a side effect, since this effectively
replaces it - and the video-reading code has been significantly
restructured to make more sense and be more readable.
This means users no longer have to constantly download and maintain a
separate deband.glsl installation alongside mpv, which was the only real
use case for source-shader that we found either way.
wm4
Niklas Haas
Kevin Mitchell
Martin Herkt
James Ross-Gowan
Bin Jin
rr-
Avi Halachmi (:avih)