The user can raise the number of tolerated hardware decoding errors. On
the other hand, we have a static limit on packets that are "saved" for
fallback handling (and that's a good idea to avoid unbounded memory
usage). In this case, it could happen that the start of a file was fine
after a fallback, but after that buffered amount of data, it would
suddenly skip.
It's more useful to skip buffering entirely if the number of tolerated
decoding errors exceeds the fixed buffer.
(And also, I'm sure nobody gives a shit about this feature.)
The statement about the display FPS is outdated by several years.
"audio"-sync mode does not use the display FPS anymore, and that it's
X11 only also isn't true anymore.
These modes have separate implementations for audio and display video
sync. modes, so the explanations are separate.
Why the hell are users playing around with this anyway? The explanations
are probably too special to make sense for anyone who doesn't know the
code (and who knows the code doesn't need them anyway), but whatever.
This is mostly just because of the odd RGB default gamma issue, which
shouldn't have any real impact. This also sets allow_approximate_gamma,
which I hope is fine for normal use cases.
Raise swscale and zimg default parameters. This restores screenshot
quality settings (maybe) unset in the commit before. Also expose some
more libswscale and zimg options.
Since these options are also used for VOs like x11 and drm, this will
make x11/drm/etc. much slower. For compensation, provide a profile that
sets the old option values: sw-fast. I'm also enabling zimg here, just
as an experiment.
The core problem is that we have a single set of command line options
which control the settings used for most swscale/zimg uses. This was
done in the previous commit. It cannot differentiate between the VOs,
which need to be realtime and may accept/require lower quality options,
and things like screenshots or vo_image, which can be slower, but should
not sacrifice quality by default.
Should this have two sets of options or something similar to do the
right thing depending on the code which calls libswscale? Maybe. Or
should I just ignore the problem, make it someone else's problem (users
who want to use software conversion VOs), provide a sub-optimal
solution, and call it a day? Definitely, sounds good, pushing to master,
goodbye.
By default utilizes the color space of the desktop on which the
swap chain is located. If a specific value is defined, it will be
instead be utilized.
Enables configuration of the PQ color space (BT.2020 primaries,
PQ transfer function) for HDR.
Additionally, signals the swap chain color space to the renderer,
so that the render looks correct without having to specify
target-trc or target-prim manually.
Due to all of the APIs being Win10+ only, will only work starting
with Windows 10.
Enabling this by default probably causes a number of issues, such as
breaking vo_sdl, or reacting to various input devices while the window
is not focused. It's also pretty obscure, or at least new. Disable it by
default.
This doesn't take a ',' separated list. --script is just an alias for
--scripts--append. --scripts accepts a list, but uses the
mplayer-inherited platform-dependent path separator.
Fixes: #5996
Internally, vo_gpu uses NaN for some options to indicate a default value
that is different depending on the context (e.g. different scalers).
There are 2 problems with this:
1. you couldn't reset the options to their defaults
2. NaN is a damn mess and shouldn't be part of the API
The option parser already rejected NaN explicitly, which is why 1.
didn't work. Regarding 2., JSON might be a good example, and actually
caused a bug report.
Fix this by mapping NaN to the special value "default". I think I'd
prefer other mechanisms (maybe just having every scaler expose separate
options?), but for now this will do. See you in a future commit, which
painfully deprecates this and replaces it with something else.
I refrained from using "no" (my favorite magic value for "unset" etc.)
because then I'd have e.g. make --no-scale-param1 work, which in
addition to a lot of effort looks dumb and nobody will use it.
Here's also an apology for the shitty added test script.
Fixes: #6691
The code is very basic:
- only handles gamepads, could be extended for generic joysticks in the
future.
- only has button mappings for controllers natively supported by SDL2.
I heard more can be added through env vars, there's also ways to load
mappings from text files, but I'd rather not go there yet. Common ones
like Dualshock are supported natively.
- analog buttons (TRIGGER and AXIS) are mapped to discrete buttons using an
activation threshold.
- only supports one gamepad at a time. the feature is intented to use
gamepads as evolved remote controls, not play multiplayer games in mpv :)
Form some reason (and because of my fault), vf_format converts image
formats, but nothing else. For example, setting the "colormatrix"
sub-parameter would not convert it to the new value, but instead
overwrite the metadata (basically "reinterpreting" the image data
without changing it).
Make the historical mistake worse, and go all the way and extend it such
that it can perform a conversion. For compatibility reasons, this needs
to be requested explicitly. (Maybe this would deserve a separate filter
to begin with, but things are messed up anyway. Feel free to suggest an
elegant and simple solution.)
This demonstrates how zimg can properly perform some conversions which
swscale cannot (see examples added to vf.rst).
Stupidly this requires 2 code paths, one for conversion, and one for
overriding the parameters.
Due to the filter bullshit (what was I thinking), this requires quite
some acrobatics that would not be necessary without these abstractions.
On the other hand, it'd definitely be more of a mess without it. Oh
whatever.
Awful shit. I probably wouldn't accept this code from someone else, just
so you know.
The idea is that a sws_utils user can automatically use zimg without
large code changes. Basically, laziness. Since zimg support is still
very new, and I don't want that anything breaks just because zimg was
enabled at build time, an option needs to be set to enable it. (I have
especially especially obscure stuff in mind, which is all what
libswscale is used in mpv.)
This _still_ doesn't cause zimg to be used anywhere, because the
sws_utils user has to opt-in by setting allow_zimg. This is because some
users depend on certain libswscale features.
This provides a very similar API to sws_utils.h, which can be used to
convert and scale from one mp_image to another.
This commit adds only the code, but does not use it anywhere.
The code is quite preliminary and barely tested. It supports only a few
pixel formats, and will return failure for many others. (Unlike
libswscale, which tries to support anything that FFmpeg knows.)
zimg itself accepts only planar formats. Supporting other formats
requires manual packing/unpacking. (Compared to libswscale, the zimg API
is generally lower level, but allows for more flexibility.) Only BGR0
output was actually tested. It appears to work.
On a audio/video desync by more than 0.5 seconds, display-sync mode was
disabled, and not enabled again (until playback restart, e.g. a seek).
The idea was that it this only happens when this playback mode is broken
and can't perform well anyway (A/V desync is a clear indication that
something is very wrong). Instead of behaving like a god damn POS, it
should revert to the more robust audio-sync mode.
Unfortunately, this could happen sporadically due to temporary system
performance problems, such as toggling fullscreen. Users didn't like
this, and asked for a function to disable it, or to recover in some
other way.
This mechanism is questionable anyway. If an ignorant user enables
display-sync, and encounters problems with it (without being able to
determine that display-sync is messing up), the player will still behave
like a POS on every playback, and even after every seek. It might
actually be helpful to fail more consistently. Also, I've found that
it's sill relatively reliable anyway even without this mechanism.
So just remove the fallback.
Fixes: #7048
vo_wayland was removed during the wayland rewrite done in 0.28. However,
it is still useful for systems that do not have OpenGL.
The new wayland_common code makes vo_wayland much simpler, and
eliminates many of the issues the previous vo_wayland had.
OK, so --cache-secs is useless, because the default is set to 10 hours.
And that part about the "maximum" was obviously a lie (I wonder if it
simply changed at some point).
Query information on the system output most linked to the swap chain,
and either utilize a user-configured format, or either 8bit
RGBA or 10bit RGB with 2bit alpha depending on the system output's
bit depth.
Someone crazy is trying to mix images with videos in EDL files. Putting
an image as first thing into the EDL disabled audio, because the first
EDL entry was used to define the layout.
Change this. Make it user-configurable, and use a "better" heuristic to
select the default otherwise.
In theory, EDL could be easily extended to specify track layout and
mapping of parts to virtual EDL tracks manually and in great detail. But
I don't think it's worth it - who would bother using it?
Fixes: #6764
In this case, gapless will most likely not work. It will result in (very
slight) desync, or (more commonly with small buffer sizes), in an
underflow.
I think it would be legitimate to disable gapless at end of playback
completely if video is enabled at all. But this would need an exception
for cover art mode, so I guess the current solution is OK as well.
Another thing nobody will read. I'm attempting to document the rules by
which incompatible changes can be made. These rules have always been
present in this project, but I don't think they were written down. Or
maybe they were, but I forgot where.
I think due to the time of the day it became increasingly incoherent
(not necessarily near the end of the text). Hopefully no logical or
freudian lapses in there.
Although it was not true at the time this was written, both the
"program" and "cache-size" are gone now.
Since the changelog is for the entire next release, it makes no sense to
mention these removed properties.
It also happens to make the description of this much simpler, because
it's a non-issue now. It's probably not even worth mentioning anymore.
The justification for this is the fact that the `video-aspect` property
doesn't work well with `cycle_values` commands that include the value
"-1".
The "video-aspect" property has effectively no change in behavior, but
we may want to make it read-only in the future. I think it's probably
fine to leave as-is, though.
Fixes#6068.
There's potential confusion about how long a process started with the
"subprocess" command is allowed to live. Add some more explanations
regarding "subprocess" specifics (such as the playback_only field), and
things that apply to asynchronous commands in general.
Partially for #7025.
Still trying to get people to read it. Even though I wanted to make it
less of a wall of text and more readable, it got bigger. Oops.
While I'm at it, violate my own rules and mix these mostly cosmetic
changes with some actual rule changes and clarifications.
wm4
Jan Ekström
Jan Janssen
Cameron Cawley
sfan5
Stefano Pigozzi
dudemanguy
Michael Forney
Niklas Haas
Oliver Freyermuth