mpv_opengl_cb_uninit_gl() can be called at any time; but then the
decoder must be destroyed due to complications with hardware decoding.
This is why kill_video() exists. To make things easier, there is the
invariant that while vo_opengl_cb is active, the OpenGL state must
exist. But kill_video() didn't actually destroy the VO; only the video
decoder. This could trigger an assertion (vo_opengl_cb.c:187).
Actually, the video output is always destroyed lazily at a later point
if the decoder is destroyed, but not early enough for out purposes.
This may or may not be useful for client API users.
Fold this API extension into the previous API bump. The previous bump
was only yesterday, so it's ok.
Until now, calling mpv_opengl_cb_uninit_gl() at a "bad moment" could
make the whole thing to explode. The API user was asked to avoid such
situations by calling it only in "good moments". But this was probably a
bit too subtle and could easily be overlooked.
Integrate the approach the qml example uses directly into the
implementation. If the OpenGL context is to be unitialized, forcefully
disable video, and block until this is done.
Before this commit, this was defined to trigger undefined behavior. This
was nice because it required less code; but on the other hand, Lua as
well as IPC support had to check these things manually. Do it directly
in the API to avoid code duplication, and to make the API more robust.
(The total code size still grows, though...)
Since all of the failure cases were originally meant to ruin things
forever, there is no way to return error codes. So just print the
errors.
This adds API to libmpv that lets host applications use the mpv opengl
renderer. This is a more flexible (and possibly more portable) option to
foreign window embedding (via --wid).
This assumes that methods like context sharing and multithreaded OpenGL
rendering are infeasible, and that a way is needed to integrate it with
an application that uses a single thread to render everything.
Add an example that does this with QtQuick/qml. The example is
relatively lazy, but still shows how relatively simple the integration
is. The FBO indirection could probably be avoided, but would require
more work (and would probably lead to worse QtQuick integration, because
it would have to ignore transformations like rotation).
Because this makes mpv directly use the host application's OpenGL
context, there is no platform specific code involved in mpv, except
for hw decoding interop.
main.qml is derived from some Qt example.
The following things are still missing:
- a way to do better video timing
- expose GL renderer options, allow changing them at runtime
- support for color equalizer controls
- support for screenshots
This is simply not allowed, and doing it triggered an assertion. It's
still not allowed, because the terminal and related functionality is a
global resource, and there doesn't seem to be a sane way to manage the
signal handlers.
But be a bit nicer, and just the terminal if it's already in use.
Note that terminal _output_ happens anyway. This becomes usable with
this commit. To facilitate logging-only usage further, also explicitly
disable terminal input, so that "terminal=yes" can be used for logging
without much interference with other things. (It'll still overwrite some
signal handlers, though.)
Currently, --ytdl is off by default, but even if this is changed, never
enable it by default for the client API. It would be inappropriate to
start an intrusive external subprocess behind the host application's
back.
Use a fixed size array for the client name, which also limits the client
name in size. Sanitize the client name string, and replace characters
that are not in [A-Za-z0-9] with '_'.
The values compared here happen to be of unsigned enum types - but the
test is not supposed to break if we somehow force the enum to signed, or
if the compiler happens to use a signed type (as far as I remember, the
exact integer type the compiler can use is implementation-defined).
Add a generic mechanism to the VO to relay "extra" events from VO to
player. Use it to notify the core of window resizes, which in turn will
be used to mark all affected properties ("window-scale" in this case) as
changed.
(I refrained from hacking this as internal command into input_ctx, or to
poll the state change, etc. - but in the end, maybe it would be best to
actually pass the client API context directly to the places where events
can happen.)
This is probably what libmpv users want; and it also improves error
reporting (or we'd have to add a way to communicate such mid-playback
failures as events).
Especially with other components (libavcodec, OSX stuff), the thread
list can get quite populated. Setting the thread name helps when
debugging.
Since this is not portable, we check the OS variants in waf configure.
old-configure just gets a special-case for glibc, since doing a full
check here would probably be a waste of effort.
A vague idea to get something similar what libquvi did.
Undocumented because it might change a lot, or even be removed. To give
an idea what it does, a Lua script could do the following:
-- type ID priority
mp.commandv("hook_add", "on_load", 0, 0)
mp.register_script_message("hook_run", function(param, param2)
-- param is "0", the user-chosen ID from the hook_add command
-- param2 is the magic value that has to be passed to finish
-- the hook
mp.resume_all()
-- do something, maybe set options that are reset on end:
mp.set_property("file-local-options/name", "value")
-- or change the URL that's being opened:
local url = mp.get_property("stream-open-filename")
mp.set_property("stream-open-filename", url .. ".png")
-- let the player (or the next script) continue
mp.commandv("hook_ack", param2)
end)
Allows passing native types as arguments.
Also some minor doc improvements, including giving some (natural)
improvements to mpv_free_node_contents().
Note: mpv_command_node_async() is completely untested.
The event monitor is used to get keyboard events when there is no window, but
since it is a global monitor to the current process, we don't want it in a
library setting.
After @frau's split of macosx_events from macosx_application, `is_cplayer' is
not needed anymore. At the moment only global events such as Media Keys and
Apple Remote work, because the VO-level ones were hardcoded to be disabled.
(that will be fix in a later commit ).
Maybe using strings for log levels was a mistake (too broad and too
impractical), so I'm adding numeric log level at least for the receiver
side. This makes it easier to map mpv log levels to other logging
systems.
I'm still too stingy to add a function to set the log level by a numeric
value, though.
The numeric values are not directly mapped to the internal mpv values,
because then almost every file in mpv would have to include the client
API header.
Coalesce this into API version 1.6, since 1.6 was bumped just yesterday.
Commit 64b7811c tried to do the "right thing" with respect to whether
keyboard input should be enabled or not. It turns out that X11 does
something stupid by design. All modern toolkits work around this native
X11 behavior, but embedding breaks these workarounds.
The only way to handle this correctly is the XEmbed protocol. It needs
to be supported by the toolkit, and probably also some mpv support. But
Qt has inconsistent support for it. In Qt 4, a X11 specific embedding
widget was needed. Qt 5.0 doesn't support it at all. Qt 5.1 apparently
supports it via QWindow, but if it really does, I couldn't get it to
work.
So add a hack instead. The new --input-x11-keyboard option controls
whether mpv should enable keyboard input on the X11 window or not. In
the command line player, it's enabled by default, but in libmpv it's
disabled.
This hack has the same problem as all previous embedding had: move the
mouse outside of the window, and you don't get keyboard input anymore.
Likewise, mpv will steal all keyboard input from the parent application
as long as the mouse is inside of the mpv window.
Also see issue #1090.
If you send the "quit" or "stop" command with the client API, it will
now attempt to kill network I/O immediately (same as normal input in the
previous commits).
This makes the player wait until each script is loaded. Do this to give
the script a chance to setup all its event handlers. It might also be
useful to allow a script to change options that matter for playback.
While waiting for a script to be loaded, the player actually accepts
input. This is needed because the scripts can execute player commands
anyway while they are being "loaded". The player won't react to most
commands though: it can't quit or navigate the playlist in this state.
For deciding whether a script is finally loaded, we use a cheap hack: if
mpv_wait_event() is called, it's considered loaded. Let's hope this is
good enough. I think it's better than introducing explicit API for this.
Although I'm sure this will turn out as too simplistic some time in the
future, the same would probably happen with a more explicit API.
The event was copied early, and wasn't released if it was rejected
instead of being added to the event queue. Fix by copying the event at a
point when it's certainly added to the event queue.
The dup_event_data() function is merely moved.
Add a mechanism to the client API code, which allows the player core to
query whether a client API event is needed at all. Use it for the cache
update.
In this case, this is probably a pure microoptimization; but the
mechanism will be useful for other things too.
Until recently, vo_opengl could be accessed from a single thread only,
due to the OpenGL API context being thread-specific. This issue doesn't
exist anymore, because VOs run on their own thread. This means we can
simply lock/unlock the playloop instead of doing something complicated
to get the playloop thread to execute our code.
Internally, there are two mechanisms which can trigger property
notification as used with "observed" properties in the client API.
The first mechanism associates events with a group of properties that
are potentially changed by a certain event. mp_event_property_change[]
declares these associations, and maps each event to a set of strings.
When an event happens, the set of strings is matched against the list of
observed properties of each client. Make this more efficient by
comparing bitsets of events instead. This way, only a bit-wise "and" is
needed for each observed property. Even better, we can completely skip
clients which have no observed properties that match.
The second mechanism just updates individual properties explicitly by
name. Optimize this by using the property index instead. It would be
nice if we could reuse the first mechanism for the second one, but
there are too many properties to fit into a 64 bit mask.
(Though the limit on 64 events might get us into trouble later...)
This is perfectly allowed, but was ignored, because it's a corner case.
It doesn't actually wait for other clients to be destroyed, but on the
other hand I think there's no way to have other clients before
initialization.
CC: @mpv-player/stable
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Since redundant wakeups are avoided now, it's easy to miss a wakeup when
creating/setting the pipe/callback after the client API was signalled.
If the client API is signalled, need_wakeup is set to true, and
wakeup_client skips writing to the pipe or calling the client API. That
this can happen is not very obvious to the client API, so trigger a
wakeup right on start in order to remove this special case.
Until now, availability of new log messages (through the mechanism
associated with mpv_request_log_messages()) did not wakeup the client
API properly. Commit 3b7402b5 was basically a hack to improve that
somewhat, but it wasn't a solution.
The main problem is that the client API itself is producing messages, so
the message callback would attempt to lock the client API lock,
resulting in a deadlock. Even if the lock was recursive, we'd run into
lock-order issues.
Solve this by using a separate lock for waiting and wakeup. Also, since
it's a natural addition, avoid redundant wakeups. This means the wakeup
callback as well as the wakeup pipe will be triggered only once until
the next mpv_wait_event() call happens.
This might make the wakeup callback be invoked in a reentrant way for
the first time, for example if a mpv_* function prints to a log. Adjust
the docs accordingly. (Note that non-reentrant beheavior was never
guaranteed - basically the wakeup callback is somewhat dangerous and
inconvenient.)
Also remove some traces of unneeded code. ctx->shutdown for one was
never set, and probably a leftover of an abandoned idea.
A bit verbose, but less misleading. In most cases, the API user probably
actually wants mpv_terminate_destroy() instead, so the less-useful
function shouldn't have a simnpler name anyway.
mpv_destroy() should perhaps better be called mpv_detach(), because it
destroys only the handle, not necessarily the player. The player is only
terminated if a quit command is sent.
This function quits automatically, and additionally waits until the
player is completely destroyed. It removes the possibility that the
player core is still uninitializing, while all client handles are
already destroyed. (Although in practice, the difference is usually not
important.)
Now a negative timeout mean an infinite timeout. This is similar to the
poll() system call. Apparently this is more intuitive and less confusing
than specifying a "very high" value as timeout if you want to wait
forever.
For callers that never pass negative timeouts, nothing changes.
Listening on messages currently uses polling (every time
mpv_wait_event() has no new events, the message buffer is polled and a
message event is possibly created). Improve this situation a bit, and
call the user-supplied wakeup callback.
This will increase the frequency with which the wakeup callback is
called, but the client is already supposed to be able to deal with this
situation. Also, as before, calling mpv_wait_event() from the wakeup
callback is forbidden, so the client can't read new messages from the
callback directly.
The wakeup pipe is written either. Since the wakeup pipe is created
lazily, we can't access the pipe handle without creating a race
condition or a deadlock. (This is actually very silly, since in practice
the race condition won't matter, but for now let's keep it clean.)
wm4
James Ross-Gowan
Stefano Pigozzi