MPlayer traditionally had completely separate sh_ structs for
audio/video/subs, without a good way to share fields. This meant that
fields shared across all these headers had to be duplicated. This commit
deduplicates essentially the last remaining duplicated fields.
Always use the already existing extradata[_len] variable, instead of the
awkward switch between manually changed extradata and falling back to
passing through extradata at the end.
That's how mime types are.
(This makes redirection with a specific HLS URL work, because some idiot
thought it'd be a great idea to spell the mime type as
"application/x-mpegURL".)
The only decoders I could find and which (possibly) require this field
are codecs which can be used via VfW only, and realaudio sipr. For VfW
we still passthrough this field.
Native Matroska codec support has to map the Matroska codec IDs to
libavcodec ones, and also has to undo codec-specific Matroska
strangeness, such as restoring AAC extradata and realaudio handling. The
VfW codec support doesn't need it, because AVI maps well enough to
libavcodec conventions (possibly because AVI was a dominant codec when
libavcodec was created). But there's still some need for generic codec
handling, such as enabling parsers and messing with various codec
parameters.
Separate these two, and move the parts which are guaranteed not to be
needed by VfW to the if-else tree that handles the VfW case
("A_MS/ACM"), making the cases exclusive.
(This should probably be done more radically, since it's very unlikely
that we should or have to mess with the VfW parameters at all - they
should just be passed through to the decoder.)
This removes the last traces of the old MPlayer FourCC-based codec
mapping code. Forcing all codec IDs through a FourCC table and then
back to codec names was confusing at best, so this is a nice cleanup.
Handling of PCM (non-VfW case) is redone to some degree.
Handling of AC3 is moved below realaudio handling, since "A_REAL/DNET"
is apparently AC3, and we must not skip realaudio-specific handling.
(It seems unlikely that anything would actually break, but on the other
hand I don't have any A_REAL/DNET samples for testing.)
Instead of explicitly matching all the specific AAC codec names, just
match them all as prefix.
Some codecs don't need special handling other than their mapping
entries, so they fall away (like Vorbis and Opus).
The prores check in mkv_parse_and_add_packet() is not strictly related
to this, but is done for consistency with the wavpack check above.
The existing code avoided doing this for some codecs. I see no point in
this, and it seems the original reason this exists was due to some
cleanup in 2007. libavformat doesn't do this. So just drop it.
It's well possible that we've always ended up invoking the
AV_CODEC_ID_MPEG1VIDEO codec, but it's hard to tell. Mangling everything
through FourCCs (and then back) makes it hard to analyze. Also,
libavformat's Matroska demuxer uses AV_CODEC_ID_MPEG2VIDEO here, so it
should be quite safe to do anyway.
Inherited from MPlayer times, we used FourCCs to identify video codecs.
This was later changed to libavcodec codec names (which made life a
whole lot simpler). But demux_mkv still uses FourCCs a lot.
Change this for video. It's pretty simple, because some preparation was
done in the past. We just have to replace some "internal" FourCCs with
different handling.
One potentially complicated issue is that there is no natural way to
set the sh->format (AVCodecContext.codec_tag) field anymore. Most
decoders do not need it, though mjpeg is an exception.
Note that the AVI compatibility code still requires codec mappings, but
these are provided by FFmpeg. Also, the audio code is not changed.
For the MKV_V_MPEG2 -> mpeg1video thing see next commit.
Vobsubs come as .idx/.sub pair of files. The .idx file is the one that
should be opened, but the name of the .sub file is unknown. We can now
make our own guess what the name of that file is. In particular, improve
support with URLs (as these can have the file extension in the middle of
the filename string if there are HTTP parameters).
Note that this works only with newer ffmpeg versions, because the
recently added sub_name demuxer option is used for this.
This reads the "CUESHEET" tag, and attempts to parse it as .cue data. If
any is found, the cue tracks are added as chapters.
This reuses the parser written for demux_cue.c.
Fixes#1957.
The options don't change, but they're now declared and used privately by
demux_mkv.c. This also brings with it a minor refactor of the subpreroll
seek handling - merge the code from playloop.c into demux_mkv.c. The
change in demux.c is pretty much equivalent as well.
This change allows forward seeking even if there are no more video
keyframes in forward direction. This helps with files that e.g. encode
cover art as a single video frame (within a _real_ video stream - ffmpeg
seems to like to produce such files). Seeking backwards will still jump
to the nearest video frame, so this improvement has limited use.
The old code didn't do this because of the logic the min_diff variable
followed. Instead of somehow using the timestamp of the last packet read
for min_diff, use the first index entry for it. This actually makes it
fall back to the first/last index entry as the (removed) comment claims.
Note that last_pts is basically random at this point (because the
demuxer can be far ahead of playback position), so this didn't make
sense in the first place.
On EOF, this stopped reporting the actual cache duration, and just
signalled unknown duration. Fix this and keep reporting whatever is left
in the packet queue.
This reverts commit 5438a8b3. The commit doesn't give a good explanation
as to why it is needed, but I guess it was because the reporting was
imperfect (it switched between unknown or 0, and the correct duration).
This also removes a line added in commit 848546f2. The line is
ds->active = false;
The "active" flag basically says that data from this stream is actively
needed, and it's used to calculate the minimum data that can actually be
played (approximately). If this were ignored, a sparse subtitle stream
would set the cache duration to 0s. The commit message adding the line
says "actually does nothing, but in theory it's cleaner". Well, screw
it.
Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
If a directory is encountered, replace it with its contents in the
internal playlist.
This is messed into demux_playlist.c, because why not. STREAMTYPE_DIR
could be avoided by unconditonally trying opendir() in demux_playlist.c,
but it seems nicer not to do weird things like calling it on real files.
This does not work on Windows, because msvcrt is retarded.
We handle picking out font attachments by mime type ourselves in a
higher level, so we really just want to use the mimetype. Also, Matroska
is currently the only code in libavformat which uses the fonts at all,
and we can drop use of the codec IDs completely.
With a recent cleanup, rar support was stuffed into demux_playlist.c
(because "opening" rar files pretty much just lists archive contents and
adds them to a playlist using a special rar:// protocol, which will
actually access the rar file contents).
Since demux_playlist.c is probed _after_ demux_lavf.c (and should/must
be), libavformat was given the chance to detect DTS streams embedded
within the rar file. This is not really what we want, and a regression
what happened before rar listing was moved to demux_playlist.c.
Fix it by moving the rar listing into its own pseudo-demuxer, and let ir
probe before demux_lavf.c.
(Yes, this feature still has users.)
Trying to handle such video is almost worthless, but it was requested by
at least 2 users.
If there are no timestamps, enable byte seeking by setting
ts_resets_possible. Use the video FPS (wherever it comes from) and the
audio samplerate for timing. The latter was already done by making the
first packet emit DTS=0; remove this again and do it "properly" in a
higher level.
Check async abort notification. libavformat already do something
equivalent.
Before this commit, the demuxer could enter resync mode (and print silly
warning messages) when the stream stopped returning data because of an
abort.
A user reported a webm stream that couldn't be played. The issue was
that this stream 1. was on an unseekable HTTP connection, and 2. had a
SeekHead element (wtf?). The code reading the SeekHead marked the
element as unreadable too early: although you can't seek in the stream,
reading the header elements after the SeekHead read them anyway. Marking
them as unreadable only after the normal header reading fixes this.
(The way the failing stream was setup was pretty retarded: inserting
these SeekHead elements makes absolutely no sense for a stream that
cannot be seeked.)
Fixes#1656.
This reverts commit c8f49be919.
Not needed anymore; fixed in all supported FFmpeg releases. Though I
could not test again, because all sample files are gone (oops).
Use the (relatively new) libavformat image format probing functionality,
instead of letting demux_mf guess by file extension and MIME type.
The libavformat support is weird, though. Traditionally, it uses an
absolutely terrible hack to detect images by extension, _and_ (which is
the horrible part) will randomly interpret parts of the filename as
specifiers for matching by number. So something like '%03d' will be
interpreted as placeholder for a frame number. The worst part is that
such character sequences can be perfectly valid and common in http URLs.
This is known as "image2" demuxer. The newer support, which probes by
examining the file header, is split into several format-specific
demuxers with names ending in "_pipe". So we check for such a name
suffix. (At this point we're doing fine-grained hacking around ffmpeg
weirdness, so a clean solution is impossible anyway until upstream
changes.)
It was possible to make the player play local files by putting rar://
links into remote playlists, and some other potentially unsafe things.
Redo the handling of it. Now the rar-redirector (the thing in
demux_playlist.c) sets disable_safety, which makes the player open any
playlist entries returned. This is fine, because it redirects to the
same file anyway (just with different selection/interpretation of the
contents). On the other hand, rar:// itself is now considered fully
unsafe, which means that it is ignored if found in normal playlists.
This warning wasn't overly helpful in the past, and warned against
perfectly fine code. But at least with recent gcc versions, this is the
warning that complains about assignments in if expressions (why???), so
we want to enable it.
Also change all the code this warning complains about for no reason.
Refactors an older hack, which for some reason used a more complicated
way. This generates the playlist representing the contents of the rar
file in demux_playlist.c. The pseudo-demuxer could easily be separate
from the the playlist parsers (and in fact there's almost no shared
code), but I don't think this obscure feature deserves a separate file.
Sample files created with:
rar a -v20000k -m0 files.rar file1.mkv file1.mkv
If the cache is enabled, the demuxer is closed and opened again (because
currently, the cache can not be enabled atfer data was already read).
The call for opening a new demuxer uses the same params struct, which
references the ctx->uids array. But there is a MP_TARRAY_GROW()
invocation somewhere on the way, which can reallocate the ctx->uids
array, making params.uids a dangling pointer.
This issue probably existed for a longer time, probably since 5cd33853
(slightly more obvious since f50b105d).
Again removes some indirections and extra arguments.
Also replace some memcpy/memmoves with assignments. (Assignments became
possible only later, when reference UIDs were turned into a struct.)
Should behave about the same, but reduces code some duplication with
seeking and reading a header element pointed to by a SeekHead. It also
makes behavior with incomplete files slightly better.
Remove coded_width and coded_height. This was originally added in commit
fd7dde40, when BITMAPINFOHEADER was killed. The separate fields became
redundant in commit e68f4be1. Remove them (nothing passed to the
decoders actually changes with _this_ commit).
Some of the hacks were not applied if the file format was forced. Commit
37a0c914 moved them to a table, which is checked with normal probing
only.
Fixes#1612 (DVD forces mpeg, which in turn has to export native stream
IDs specifically).
Do some code restructuring on the way. For example, the probescore can
simply be set to the correct initial value, instead of checking whether
it was set at all.
Whatever the hell that is. FFmpeg tries to open any files with .bin file
extension with this demuxer (unless it finds a better demuxer), and then
reads the whole damn file, along with spamming dumb crap.
Includes some logic for not starting the demuxer thread for fully read
subtitles. (Well, the cache will still waste _lots_ of resources, and
the cache always has to be created, because we don't know whether it'll
be needed _before_ opening the file.)
See #1597.
An attempt to make format-specifics more declarative. (In my opinion,
all of this should be either provided by libavformat, or should not be
needed.)
I'm still leaving many checks with matches_avinputformat_name(), because
they're so specific.
Also useful for the following commit.
The Matroska timeline code was the only thing which still used the
demuxer.type field. This field explicitly identifies a demuxer
implementation. The purpose of the Matroska timeline code was to reject
files that are not Matroska. But it already forces the Matroska format,
meaning loading will explicitly only use the Matroska demuxer. If the
demuxer can't open the file, no other demuxer will be tried, and thus
checking the field is redundant.
The change in demux_mkv_timeline.c removes the if condition, and
unindents the if body.
Only demux_cue and demux_edl used it. It's a weird field and doesn't
help with anything anymore - by now, it only saves a priv context in the
mentioned demuxers. Reducing the number of confusing things the demuxer
struct has is more important than minimizing the code.
Move the implementation, of which most was in tl_cue.c, to demux_cue.c.
Currently, this is illogical, because tl_cue.c still accesses MPContext.
This is going to change, and then it will be better if everything is in
demux_cue.c. This is only a separate commit to distinguish code movement
and actual work; the next commit will do the actual work.
Instead of accessing MPContext in player/timeline/*, create a separate
context struct, which the timeline loaders fill out. It turns out that
there's not much in the way too big MPContext that these need to access.
One major PITA is managing (and closing) the set of open demuxers. The
problem is that we need a list of all demuxers to make sure no unneeded
streams are enabled.
This adds a callback to the demuxer_desc struct, with the intention of
leaving to to the demuxer to call the right loader, instead of
explicitly checking the demuxer type and dispatching manually in common
code. I also considered making the timeline part of the demuxer state,
but decided against: it's too much of a mess wrt. memory management and
threading, and also doesn't make it clear who owns the child demuxers.
With the struct timeline decoupled from the demuxer state, it's at least
somewhat clear that the child demuxers are independent from the "main"
demuxer.
The actual changes to player/timeline/* are separated in the following
commits, because they're quite verbose. Some artifacts will be removed
later as soon as there's only 1 timeline loading mechanism.
The HLs protocol consists of a "playlist" main file, which mpv downloads
and passes to the HLS demuxer. The HLS demuxer actually requests segment
files containing media data on its own. The packets read from the
demuxer have a source file position set, but it's not from the main
file. This leads to a strange effect: as a last fallback, the player
will calculate the approximate playback position from the file
position/size ratio, and since the main file is tiny, this will always
show 100%. Fix this by resetting the packet file position.
This doesn't affect the case when HLS actually reports a duration.
If the previous subtitle packet is too far back, and the refresh seek
won't pick it up, and the packet never comes again. As a consequence,
the refresh mode was never stopped on the subtitle stream, which caused
all packets to be discarded.
Fix by assuming the file position is monotonically increasing; then it
will resume even if a packet _after_ the intended resume point is
returned. This introduces a new requirement on how the demuxer behaves.
(I'm not sure if mp4 actually satisfies this requirement in all cases.)
Fixes a regression introduced by commit f9f2e1cc.
This removes the delay when switching audio tracks in mkv or mp4 files.
Other formats are not enabled, because it's not clear whether the
demuxers fulfill the requirements listed in demux.h. (Many formats
definitely do not with libavformat.)
Background:
The demuxer packet cache buffers a certain amount of packets. This
includes only packets from selected streams. We discard packets from
other streams for various reasons. This introduces a problem: switching
to a different audio track introduces a delay. The delay is as big as
the demuxer packet cache buffer, because while the file was read ahead
to fill the packet buffer, the process of reading packets also discarded
all packets from the previously not selected audio stream. Once the
remaining packet buffer has been played, new audio packets are available
and you hear audio again.
We could probably just not discard packets from unselected streams. But
this would require additional memory and CPU resources, and also it's
hard to tell when packets from unused streams should be discarded (we
don't want to keep them forever; it'd be a memory leak).
We could also issue a player hr-seek to the current playback position,
which would solve the problem in 1 line of code or so. But this can be
rather slow.
So what we do in this commit instead is: we just seek back to the
position where our current packet buffer starts, and start demuxing from
this position again. This way we can get the "past" packets for the
newly selected stream. For streams which were already selected the
packets are simply discarded until the previous position is reached
again.
That latter part is the hard part. We really want to skip packets
exactly until the position where we left off previously, or we will skip
packets or feed packets to the decoder twice. If we assume that the
demuxer is deterministic (returns exactly the same packets after a seek
to a previous position), then we can try to check whether it's the same
packet as the one at the end of the packet buffer. If it is, we know
that the packet after it is where we left off last time.
Unfortunately, this is not very robust, and maybe it can't be made
robust. Currently we use the demux_packet.pos field as unique packet
ID - which works fine in some scenarios, but will break in arbitrary
ways if the basic requirement to the demuxer (as listed in the demux.h
additions) are broken. Thus, this is enabled only for the internal mkv
demuxer and the libavformat mp4 demuxer.
(libavformat mkv does not work, because the packet positions are not
unique. Probably could be fixed upstream, but it's not clear whether
it's a bug or a feature.)
Until now, some packets could return the same file position if they were
split off from a Matroska-level packet. This was perfectly fine, because
the file position isn't used for anything overly important (it uses it
to estimate playback position if no other information is available). The
following commit will use the demux_packet.pos field as unique ID (as a
simplification), so make the demuxer export more finegrained
information.
Also, the last_filepos field didn't have to be global, at least not
anymore.
Reindent the whole handle_realaudio() function, and make the surrouding
if block return early instead.
Also contains some cosmetics to the sipr swapping, which hopefully does
not change the semantics, but is untested (the kind of cosmetic changes
everyone loves so much). May the person responsible for sipr rot in
hell. (It was probably done to obfuscate the codec?)
Staring at the code, it doesn't look like the extra code for "normal"
audio is needed. Most of it looks like artifacts from the previous code
structure (much of it was added in the initial commit). I couldn't find
a sample that uses this code path to fully confirm this, though.
I suppose it could lead to subtle changes in behavior in presence of
realvideo files that change aspect radio. With the only sample I had
available, the behavior actually improved (azumi.mkv from the MPlayer
samples FTP; when starting playback in the middle it used the wrong
aspect ratio).
Appears to work, so we can drop some code. For some really odd reason,
the descrambling done on the timestamp requires millisecond units (due
to the "algorithm", not the libavcodec API).
Fixes vp9 missing timestamps. This requires a brand new libavcodec (the
patch for this was just applied to FFmpeg git master).
The timestamp mangling is applied to VP9 only. It'd probably work with
other codecs, but it's not needed. It could break in various ways, so
it has to be explicitly checked for every enabled codec.
Makes it somewhat more uniform, and breaks up the awfully deep nesting.
This implicitly changes multiple small details, rather than only moving
code around. In particular, this computes the packet fields first and
parses them afterwards, which is needed for the next commit.
Currently, audio packets are always filtered as a whole. Since demux_raw
output a 1 second long packet, this could lead to large delays when
applying softvol volume. It could be fixed by splitting the frames the
decoder outputs before filtering them (like the old filter code used
to), but since this didn't cause any other problems yet, I'm going with
the simpler fix.
Fixes#1558.
The only reason why cdda:// goes through this wrapper-demuxer is so that
we add chapters to it. Most things related to seeking apply only to
DVD/BD, and in fact broke CDDA sekkability.
Fixes#1555.
Might fix behavior with mkv files that use ordered chapters and have
cover art tags. In my opinion, this should actually have worked (because
cover art pseudo-tracks are strictly appended), but I don't have a
sample file to test at hand.
If a file is unseekable (consider e.g. a http server without resume
functionality), but the stream cache is active, the player will enable
seeking anyway. Until know, client API user couldn't know that this
happens, and it has implications on how well seeking will work. So add a
property which exports whether this situation applies.
Fixes#1522.
Repurpose demuxer->filetype for this. It used to be used to print a
human readable format description; change it to a symbolic format name
and export it as property.
Unfortunately, libavformat has its own weird conventions, which are
reflected through the new property, e.g. the .mp4 case mentioned in the
manpage.
Fixes#1504.
Pass through the seek flags to the stream layer. The STREAM_CTRL
semantics become a bit awkward, but that's still the least awkward
part about optical disc media.
Make demux_disc.c request relative seeks. Now the player will use
relative seeks if the user sends relative seek commands, and the
demuxer announces it wants these by setting rel_seeks to true. This
change probably changes seek behavior for dvd, dvdnav, bluray, cdda,
and possibly makes seeking useless if the demuxer-cache is set to
a high value.
Will be used in the next commit. (Split to make reverting the next
commit easier.)
Normally the player doesn't read from unselected streams, so this should
be a no-op. But unfortunately, some broken files can severely confuse
the player, and assign the same demuxer stream to multiple front-end
tracks. Then selecting one of the tracks would deselect the other track,
with the end result that the demuxer stream for the selected track is
deselected. This could happen with mkv files that use the same track
number (which is of course broken). timeline_set_part() sets the tracks
using demuxer_stream_by_demuxer_id(), using the broken non-unique IDs.
The observable effect was that the player never quit, because
demux_read_packet_async() told the caller to wait some longer for new
packets. Fix by returning EOF instead.
Fixes#1481.
Reading IDs must be checked too. This was basically forgotten in commit
f3a978cd. Also set the *length parameter for ebml_parse_length() in some
error cases, which _really_ should happen.
Fixes#1461.
Apparently, originally this code was meant to be able to read past the
buffer somewhat, which is why the buffer allocation was padded by 8
byte. This is unclean and confuses valgrind. This probably could have
crashed with certain invalid files too.
Also revert the change added with 10a2f69; it should be not needed
anymore.
The VP9 codec parser has a bug: it doesn't set the data/size pointers
passed to it. As I understand, it must always do this, and in fact, if
it doesn't some libavcodec generic code would be in trouble too.
This helps with #1448, but is not the full fix for it. The codec parser
must be fixed in libavcodec itself.
Removes an annoying "No video PTS! Making something up." warning.
Mark it as keyframe, which is needed to prevent strange behavior with
PNG. Also, don't leak the picture data.
For some codecs, we need to invoke a codec parser (because libavcodec
will run into trouble otherwise). This was done based on the Matroska
codec field.
But this ignores handling of vfw-muxed files, which use a pseudo-codec
to signal presence of vfw structures, which we must unmangle to get the
real codec. Handle this by rearranging the code.
This fixes at least mp3-in-mkv for vfw-muxed files; typically old files.
This message can happen a lot for mkv files which index clusters in the
seekhead (which is also broken non-sense, but that's a different story).
Also remove a duplicate define from matroska.h.
There's no reason why parts of this demuxer would be in a separate
source file. The existence of this code is already somewhat questionable
anyway, so it may as well be dumped into a single file.
Even stranger that demux.c included mf.h for no reason (it was an
artifact from 2002 when the architecture was uncleaner).
The code could as well be in demux.c, but it's better to avoid
accidental clashes with demux_lavf.c.
FFmpeg provides no way yet to map a mime type to a codec, so do it
manually. (It _can_ map a mime type to an "input format", but not a
codec.)
Fixes#1374.
These actually are harmless. Even if the data the reader is working on
is essentially random, it's treated like untrusted input data, so there
should be no harm.
But it upsets tools like valgrind.
Probably fixes#1329.
The most awesome codec, not.
The actual code for svq3 is actually just the part that checks for
MKV_V_QUICKTIME (no other QT-muxed codecs are supported). The rest is
minor refactoring, that actually improves the code in general.
This is just enough to support the 2 svq3-in-mkv sample files I have.
This message was added in commit a0acb6ea. But it showed up in all sorts
of inappropriate contexts, such as when opening m3u from an unseekable
http URL, or playing DVDs. So I guess this didn't work out. Disabling it
again.
m3u files are normally just text files with a list of filenames. Nothing
actually mandates that there is a header. Until now, we've rejected such
files, because there's absolutely no way to detect them.
If nothing else claims the file, the extension is ".m3u", and if the
contents of the file look like text, then load it as m3u playlist. The
text heuristic is pretty cheap, but at least it should prevent trying
to load binary data as playlist. (Which would "work", but result in a
catastrophic user experience.)
Due to the text heuristic, UTF-16/32 files will be rejected (unless they
have a header), but I don't care.
This was completely breaking any low-level caching. Change it so that at
least demuxer caching will work.
Do this by using the metadata cache mechanism to funnel through the menu
commands.
For some incomprehensible reason, I had to reorder the events (which
affects their delivery priority), or they would be ignored. Probably
some crap about the event state being cleared before it could be
delivered. I don't give a shit.
All this code sucks. It would probably be better to let discnav.c access
the menu event "queue" directly, and to synchronize access with a mutex,
instead of going through all the caching layers, making things
complicated and slow.
If EOF is reached after reading a line, the EOF flag is set. This was a
problem for the m3u code, which checked for EOF _after_ reading a line,
which will discard the last line read.
Also fix a typo in an unrelated part of the file.
All of this is basically due to how MPlayer's codecs.conf worked. It
had a demuxer-interface based an AVI, using FourCCs and data structures
found in AVI. FourCCs were used to map streams to decoders. For codecs
not supported by AVI, "MPlayer internal" FourCCs were made up.
codec_tags.c is there to bridge demuxers written against the old API to
the mpv one. By now, only demux_mkv.c needs this (because demux_mkv is
the only serious demuxer left - preferably, we should use libavformat
for mkv too, but I can't see this happening any time soon, because
libavformat _still_ doesn't support segment linking). But the codec
tables are full of weird stuff automatically extracted from the old
codecs.conf tables. Most of it isn't needed for mkv.
Remove all custom tags, readd those used by demux_mkv.c internally
(see vinfo and mkv_audio_tag tables). The rest is handled by the
tables provided by libavformat, which includes AVI and QT tags.
It was more complicated than necessary.
The behavior changes slightly. Now it might pass through extradata when
it didn't before (hopefully harmless), and doesn't fail with an error if
extradata is not available, even though it's needed (harmless, will fail
either way).
The if branch has a weak check to test whether the codec_id is the short
ID, and handles the long IDs in the else branch. The long IDs are all
longer than 12 bytes long, so hardcoding the string offset to get the
trailing part of the name makes sense. But the if condition checks for
another thing, which could get the else branch run even if the codec_id
is short.
Fix the bogus control flow and check if the codec_id is long enough. One
of these checks could be considered redundant, but include them both for
defensive coding.
Do a minimal check on data read with stream_peek(). This could help with
probing from unseekable streams in some situations. (We could check the
entire EBML and Matroska headers, but probably not worth the trouble. We
could also seek back to the start, which demux.c doesn't do, but which
would work usually - also not worth the trouble.)
Make the changes started in commit c827ae5f more eloborate, and provide
an option to control the amount of data read before the seek-target. To
achieve this, rewrite the loop that finds the lowest still acceptable
target cluster. It is now searched by time instead of file position. The
behavior (both with and without preroll option) may be different from
before this change, although it shouldn't be worse.
The change demux_mkv_read_cues() fixes a bug: when seeking after playing
normally, the code would erroneously assume that durations are set. This
doesn't happen if the first operation after loading was a seek instead
of playback.
This was removed in commit 480f82fa. This caused the cache display not
to update while paused, because the update_cache() function is never
called in the thread (now I remember why the extra call was "needed").
The old implementation intentionally run update_cache() only before
waiting on a mutex, with no further checks for the condition variable.
In theory, this is strictly not sane, but since it was just for the
retrieval of the very fuzzy cache status, it was ok. Now we want to call
update_cache() outside of the mutex though - which means that in order
to avoid missed wakeups, a proper condition has to be used.
Revert commit 24e52f66; even though the old beheavior doesn't make sense
(as the commit message assured), it turns out that this works better:
typically, it means preroll will start from the previous video key frame
(the video CUE index will contain clusters with video key frames only),
which often coincides with subtitle changes. Thus the old behavior is
actually better.
Change the code that uses CueDuration elements. Instead of merely
checking whether preroll should be done, find the first cluster that
needs to be read to get all subtitle packets. (The intention is to
compensate for the enlarged preroll cluster-range due to reverting
commit 24e52f66.)
Found by clang sanitizer. Casting unsigned integers to signed integers
with same size has implementation defined behavior (it's even allowed to
crash), but it seems reasonable to expect that reasonable
implementations do a complement of 2 "conversion".
This considered only index entries that were for the same track ID as
the track used for seeking. This doesn't make much sense for preroll;
it'll just possibly skip clusters, and select an earlier cluster.
One possible negative side-effect is that the preroll might be too tight
now, and miss subtitle packets more often.
The demuxer has a hack to seek to the cluster before the target cluster
in order to "catch" subtitle lines that start before the seek target,
but overlap with the video after the seek target.
Avoid this hack if the cue index indicates that there are no overlapping
subtitle packets that can be caught by seeking to the previous cluster.
Nothing is done with them yet. This is preparation for the following
commit.
CueRelativePosition isn't even saved anywhere, because I don't intend to
use it. (Too messy for no gain.)
Instead of indexing only 1 packet per cluster (which is enough for
working seeking), add every packet to the index.
Since on seek, we go through every single index entry, this probably
makes seeking slower. On the other hand, this code is used for files
without index only (e.g. incomplete files), so it probably doesn't
matter much.
Preparation for the following commits.
If no packets are queued, the readahead time is obviously 0.
If the end time is smaller than the start time, the problem is probably
that audio and video start at slightly different times - report 0 in
this case too.
Do this because seeing "???" as readahead time is a bit annoying.
This influences the demuxer readahead display. If a stream has reached
EOF, we want to ignore it for the purpose of this calculation.
Note that if a stream contains no packets, it still should cause the
value 0s to be displayed (unless it's EOF), because that's just the
actual situation.
This was relying on the fact that timestamps will always be numerically
larger than MP_NOPTS_VALUE, but the trick didn't actually work for
MP_PTS_MIN. Be a bit more sincere, and don't rely on this anymore. This
fixes the comparison, and avoids the readahead amount displaying as
"???" in some situations (since one of the values was NOPTS).
In this case, we didn't find any new packets for this stream, even
though we've read ahead as much as possible. (If reading ahead in this
case, the "Too many packets in the demuxer packet queues" error is
normally printed.)
If we do consider this an underrun, handle_pause_on_low_cache() will
pause and show the "buffering" state, which is not useful.
Could also happen on very bad interleaving.
This mechanism was introduced for Opus, and allows correct skipping of
"preroll" data, as well as discarding trailing audio if the file's
length isn't a multiple of the audio frame size.
Not sure how to handle seeking. I don't understand the purpose of the
SeekPreRoll element.
This was tested with correctness_trimming_nobeeps.opus, remuxed to mka
with mkvmerge v7.2.0. It seems to be correct, although the reported file
duration is incorrect (maybe a mkvmerge issue).
Instead of defining a separate data structure in the core.
For some odd reason, demux_chapter exported the chapter time in
nano-seconds. Change that to the usual timestamps (rename the field
to make any code relying on this to fail compilation), and also remove
the unused chapter end time.
Basically, this will mark the demuxer as seekable with rtmp* and mmsh
protocols. These protocols have network-level time seeking, and whether
you can seek on the byte level does not matter.
Until now, seeking was typically only enabled because of the cache, and
a (nonsensical) warning was shown accordingly.
It still could happen that the server doesn't actually support thse
requests (or simply rejects them), so this is somewhat imperfect.
I'm not sure if this could be done in libavformat instead. Probably not,
because libavformat doesn't seem to have any mechanism for trying one
protocol and reverting (or redirecting) to another one if needed.
This commit is sort of a hack too, because it redirects the URL by
pretending the http:// link is a playlist containing the mmsh:// link.
The list of mime types is borrowed from MPlayer (which has completely
different code to handle this).
This was originally done for DVD/BD/DVB, where the start position could
be something different from 0, and seeking back to 0 would mess it up
completely.
Since we're not quite sure that these streams are unseekable, we can
simplify this somewhat, and also make sure we also start at 0 for normal
files. Helps a little bit with the following edition reloading commit.
Although this is fine when the stream cache is active (which caches
these and returns the result immediately), it seems cleaner not to
rely on this detail.
Remove the update_cache() call from demux_thread(), because it's sort
of in the way. I forgot why it exists, and there's probably no good
reason for it to exist anyway.
It's needed for some obscure feature in combination with .rar reading.
However, it's unconditionally used by the subtitle loader code, so take
care of not blocking the main thread unnecessarily.
(Untested.)
Apparently using the stream index is the best way to refer to the same
streams across multiple FFmpeg-using programs, even if the stream index
itself is rarely meaningful in any way.
For Matroska, there are some possible problems, depending how FFmpeg
actually adds streams. Normally they seem to match though.
Especially with other components (libavcodec, OSX stuff), the thread
list can get quite populated. Setting the thread name helps when
debugging.
Since this is not portable, we check the OS variants in waf configure.
old-configure just gets a special-case for glibc, since doing a full
check here would probably be a waste of effort.
Normally, we pass libavformat demuxers a wrapped mpv stream. But in some
cases, such as HLS and RTSP, we let libavformat open the stream itself.
In these cases, set typical network properties like useragent according
to the mpv options.
(We still don't set it for the cases where libavformat opens other
streams on its own, e.g. when opening the companion .sub file for .idx
files - not sure if we maybe should always set these options.)
Fixes opening some streams.
This means the HLS playlist will be opened twice, but that's not much of
a problem, considering it's pretty small, and HLS will make many other
http accesses anyway.
The one in msg.c was mistakenly removed with commit e99a37f6.
I didn't actually test the change in ao_sndio.c (but obviously "ap"
shouldn't be static).
Commit 50e131b43e happened to make it work for DVD (because the higher
bits of the ID are masked in the DVD case), but failed for Bluray. This
probably fixes it, although I don't have a sample to multiple streams to
confirm it really does it right.
CC: @mpv-player/stable
This code meant to flush demuxer internal buffers by doing a byte seek
to the current position. In theory this shouldn't drop any stream data.
However, if the stream positions mismatch, then avio_seek() (called by
av_seek_frame()) stops being a no-op, and might for example read some
data to skip to the seek target. (This can happen if the distance is
less than SHORT_SEEK_THRESHOLD.)
The positions get out of sync because we drop data at one point (which
is what we _want_ to do). Strictly speaking, the AVIOContext flushing is
done incorrectly, becuase pb->pos points to the start of the buffer, not
the current position. So we have to increment pb->pos by the buffered
amount.
Since there are other weird reasons why the positions might go out of
sync (such as stream_dvd.c dropping buffers itself), and they don't
necessarily need to be in sync in the first place unless AVIOContext has
nothing buffered internally, just use the sledgehammer approach and
correct the position manually.
Also run av_seek_frame() after this. Currently, it shouldn't read
anything, but who knows how that might change with future libavformat
development.
This whole change didn't have any observable effect for me, but I'm
hoping it fixes a reported problem.
When flushing the AVIOContext, make sure it can't seek back to discarded
data. buf_ptr is just the current read position, while buf_end - buffer
is the actual buffer size. Since mpegts.c is littered with seek calls,
it might be that the ability to seek could read
Mark the stream (which the demuxer uses) as not seekable. The cache can
enable seeking again (this behavior is sometimes useful for other
things). I think this should have had no bad influence in theory, since
seeking BD/DVD first does the "real" seek, then flushes libavformat and
reads new packets.
Makes it behave slightly better for VP9. This is also the behavior
libavformat has.
Also while we're at it, don't set duration except for the first packet.
Normally we don't use the duration except for subtitles (which are never
parsed or "laced"), so this should make no observable difference.
This was once central, but now it's almost unused. Only vf_divtc still
uses it for extremely weird and incomprehensible reasons. The use in
stream.c is trivial. Replace these, and remove mpbswap.h.
stream_cdda's output format is linked to demux_raw's default audio
format, and at least we don't care enough to provide a separate
mechanism to let stream_cdda explicitly set the format, so they must
match.
Judging from the existing code, it looks like CDDA always outputs little
endian. stream_cdda.c changed this back to native endian (what demux_raw
expects). Just make them both little endian. This requires less code,
and also having a raw demuxer's behavior depend on the endianness of the
machine isn't very sane anyway.
See previous commits. This finally replaces directly reading the file
data into a struct with reading them manually. In theory this is more
portable (no alignment issues and other things). For the most part,
it's nice seeing this gone.
MPlayer traditionally did this because it made sense: the most important
formats (avi, asf/wmv) used Microsoft formats, and many important
decoders (win32 binary codecs) also did. But the world has changed, and
I've always wanted to get rid of this thing from the codebase.
demux_mkv.c internally still uses it, because, guess what, Matroska has
a VfW muxing mode, which uses these data structures natively.
Let codec_tags.c do the messy mapping.
In theory we could simplify further by makign demux_mkv.c directly use
codec names instead of the MPlayer-inherited "internal FourCC" business,
but I'd rather not touch this - it would just break things.
For a while, we used this to transfer PCM from demuxer to the filter
chain. We had a special "codec" that mapped what MPlayer used to do
(MPlayer passes the AF sample format over an extra field to ad_pcm,
which specially interprets it).
Do this by providing a mp_set_pcm_codec() function, which describes a
sample format in a generic way, and sets the appropriate demuxer header
fields so that libavcodec interprets it correctly. We use the fact that
libavcodec has separate PCM decoders for each format. These are
systematically named, so we can easily map them.
This has the advantage that we can change the audio filter chain as we
like, without losing features from the "rawaudio" demuxer. In fact, this
commit also gets rid of the audio filter chain formats completely.
Instead have an explicit list of PCM formats. (We could even just have
the user pass libavcodec PCM decoder names directly, but that would be
annoying in other ways.)
Before this commit, there was AF_FORMAT_AC3 (the original spdif format,
used for AC3 and DTS core), and AF_FORMAT_IEC61937 (used for AC3, DTS
and DTS-HD), which was handled as some sort of superset for
AF_FORMAT_AC3. There also was AF_FORMAT_MPEG2, which used
IEC61937-framing, but still was handled as something "separate".
Technically, all of them are pretty similar, but may use different
bitrates. Since digital passthrough pretends to be PCM (just with
special headers that wrap digital packets), this is easily detectable by
the higher samplerate or higher number of channels, so I don't know why
you'd need a separate "class" of sample formats (AF_FORMAT_AC3 vs.
AF_FORMAT_IEC61937) to distinguish them. Actually, this whole thing is
just a mess.
Simplify this by handling all these formats the same way.
AF_FORMAT_IS_IEC61937() now returns 1 for all spdif formats (even MP3).
All AOs just accept all spdif formats now - whether that works or not is
not really clear (seems inconsistent due to earlier attempts to make
DTS-HD work). But on the other hand, enabling spdif requires manual user
interaction, so it doesn't matter much if initialization fails in
slightly less graceful ways if it can't work at all.
At a later point, we will support passthrough with ao_pulse. It seems
the PulseAudio API wants to know the codec type (or maybe not - feeding
it DTS while telling it it's AC3 works), add separate formats for each
codecs. While this reminds of the earlier chaos, it's stricter, and most
code just uses AF_FORMAT_IS_IEC61937().
Also, modify AF_FORMAT_TYPE_MASK (renamed from AF_FORMAT_POINT_MASK) to
include special formats, so that it always describes the fundamental
sample format type. This also ensures valid AF formats are never 0 (this
was probably broken in one of the earlier commits from today).
Until now, the audio chain could handle both little endian and big
endian formats. This actually doesn't make much sense, since the audio
API and the HW will most likely prefer native formats. Or at the very
least, it should be trivial for audio drivers to do the byte swapping
themselves.
From now on, the audio chain contains native-endian formats only. All
AOs and some filters are adjusted. af_convertsignendian.c is now wrongly
named, but the filter name is adjusted. In some cases, the audio
infrastructure was reused on the demuxer side, but that is relatively
easy to rectify.
This is a quite intrusive and radical change. It's possible that it will
break some things (especially if they're obscure or not Linux), so watch
out for regressions. It's probably still better to do it the bulldozer
way, since slow transition and researching foreign platforms would take
a lot of time and effort.
The last demuxed file position (demuxer->filepos) is used to estimate
the total playback percentage in files with possible timestamp resets
(like MPEG-PS). Until know, reading from any stream set this position
freely. This makes the position jump around.
Fix this by allowing icnreasing file position only. Reset it on seeking.
With crazy formats, this still could go wrong, but there's only so much
you can do.
HLS streams as demuxed by libavformat have no track title metadata. So
show the HLS bitrate if no title is set. Could be useless or annoying,
so it's a bit controversial, I guess.
--hls-bitrate=min/max lets you select the min or max bitrate. That's it.
Something more sophisticated might be possible, but is probably not even
worth the effort.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
In the else branch pict_type is always 3, so pict_type != 3 is always
false. (Note that I have no idea of what it was supposed to do and it is
just an equivalent of the old behaviour.)
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Use the "native" underrun detection, instead of guessing by a low cache
duration. The new underrun detection (which was added with the original
commit) might have the problem that it's easy for the playloop to miss
the underrun event. The underrun is actually not stored as state, so if
the demuxer thread adds a new packet before the playloop happens to see
the state, it's as if it never happened. On the other hand, this means
that network was fast enough, so it should be just fine.
Also, should it happen that we don't know the cached range (the
ts_duration < 0 case), just wait until the demuxer goes idle (i.e.
read_packet() decides to stop). This pretty much should affect broken or
unusual files only, and there might be various things that could go
wrong. But it's more robust in the normal case: this situation also
happens when no packets have been read yet, and we don't want to
consider this as reason to resume playback.
The cache percentage was useless. It showed how much of the total stream
cache was in use, but since the cache size is something huge and
unrelated to the bitrate or network speed, the information content of
the percentage was rather low.
Replace this with printing the duration of the demuxer-cached data, and
the size of the stream cache in KB.
I'm not completely sure about the formatting; suggestions are welcome.
Note that it's not easy to know how much playback time the stream cache
covers, so it's always in bytes.
The "buffering" logic was active even if the stream cache was disabled.
This is contrary to what the manpage says. It also breaks playback
because of another bug: the demuxer cache is smaller than 2 seconds,
and thus the resume condition never becomes true.
Explicitly run this code only if the stream cache is enabled. Also, fix
the underlying problem of the breakage, and resume when the demuxer
thread stops reading in any case, not just on EOF.
Broken by previous commit. Unbreaks playback of local files.
Add the --cache-secs option, which literally overrides the value of
--demuxer-readahead-secs if the stream cache is active. The default
value is very high (10 seconds), which means it can act as network
cache.
Remove the old behavior of trying to pause once the byte cache runs
low. Instead, do something similar wit the demuxer cache. The nice
thing is that we can guess how many seconds of video it has cached,
and we can make better decisions. But for now, apply a relatively
naive heuristic: if the cache is below 0.5 secs, pause, and wait
until at least 2 secs are available.
Note that due to timestamp reordering, the estimated cached duration
of video might be inaccurate, depending on the file format. If the
file format has DTS, it's easy, otherwise the duration will seemingly
jump back and forth.
The purpose of the unconditional pthread_cond_signal() when reading
cached DEMUXER_CTRLs and STREAM_CTRLs was apparently to update the
stream cache state. Otherwise, the cached fields would never be updated
when the stream is e.g. paused.
The same could be said about other CTRLs, but these aren't as important,
since they are normally updated while reading packet data.
In order to reduce wakeups, make this logic explicit.
This is a simplification, because it lets us use the AVPacket
functions, instead of handling the details manually.
It also allows the libavcodec rawvideo decoder to use reference
counting, so it doesn't have to memcpy() the full image data. The change
in av_common.c enables this.
This change is somewhat risky, because we rely on the following AVPacket
implementation details and assumptions:
- av_packet_ref() doesn't access the input padding, and just copies the
data. By the API, AVPacket is always padded, and we violate this. The
lavc implementation would have to go out of its way to make this a
real problem, though.
- We hope that the way we make the AVPacket refcountable in av_common.c
is actually supported API-usage. It's hard to tell whether it is.
Of course we still use our own "old" demux_packet struct, just so that
libav* API usage is somewhat isolated.
If a packet is appended to a stream, and there were already packets
queued, nothing about the state changed, as far as the user (i.e. the
player) is concerned. Thus no wakeup is needed.
The pthread_cond_signal() call following this is not interesting - it
will simply be a NOP if there are actually no waiters.
--demuxer-readahead-secs now controls how much the demuxer should
readahead by an amount of seconds. This is based on the raw packet
timestamps. It's not always very exact. For example, h264 in Matroska
does not store any linear timestamps (only PTS values which are going
to be reordered by the decoder), so this heuristic is usually off by
several hundred milliseconds.
The decision whether to readahead is basically OR-ed with the other
--demuxer-readahead-packets options. Change the manpage descriptions
to subtly convey these semantics.
Switching tracks caused cached_demux_control() to catch the command to
switch tracks, even if no thread was running. Thus, the tracks were
never really switched, and EOF happened immediately on playback start.
Fix it by not using the cache at all if the demuxer thread is disabled.
The cache code still has to be called somewhere, though, because it
handles stream metadata update.
Regression from today.
Because why not.
This can lead to reordering of operations between seeking and track
switching (happens when the demuxer wakes up after seek and track
switching operations were queued). Do the track switching strictly
before seeks if there is a chance of reordering, which guarantees that
the seek position will always start with key frames. The reverse
(seeking, then switching) does not really have any advantages.
(Not sure if the player relies on this behavior.)
Use OPT_KEYVALUELIST() for all places where AVOptions are directly set
from mpv command line options. This allows escaping values, better
diagnostics (also no more "pal"), and somehow reduces code size.
Remove the old crappy option parser (av_opts.c).
This happens apparently randomly with rtmp:// and after seeks. This
eventually leads to audio decoding returning an EOF status, which
basically disables audio sync. This will lead to audio desync, even if
audio decoding later "recovers" when the demuxer actually returns audio
packets.
Hack-fix this by special-casing EAGAIN.
This didn't work, because the timebase was wrong. According to the
ffmpeg doxygen, if the stream index is -1 (which is what we used), the
timebase is AV_TIME_BASE. But this didn't work, and it really expected
the stream's timebase. Quite "surprising", since this feature
(avio_seek_time) is used by rtmp only.
Fixing this properly is too hard, so hack-fix our way around it.
STREAM_CTRL_SEEK_TO_TIME is also used by DVD/BD, so a new
STREAM_CTRL_AVSEEK is added. We simply pass-through the request
verbatim.
This tells the demuxer thread that it should seek, instead of waiting
until the demuxer thread is ready.
Care has to be taken about the state between seek request and actual
seeking: newly demuxed packets have to be discarded. We can't just
flush when doing the actual seek, because the user thread could read
these packets.
I'm wondering if this could lead to issues due to relaxed ordering of
operations. But it should be fine, since seeking influences packet
reading only, and seeking is always strictly done before that.
Currently, this will have no advantages; unless audio is disabled. Then
seeking as well as normal playback can be non-blocking.
Instead of starting to fill the packet queue if at least 1 stream is
selected, wait until there is at least 1 stream had new packets
requested.
In theory this is cleaner, because it allows you to e.g. do a seek and
then reselect streams without losing packets. Seeking marks all streams
as inactive, and without this new logic, the thread would read new
packets anyway right after seek.
This fixes the same symptom as the previous commit, but when the demuxer
thread is enabled. In this case, if nothing was read from the demuxer,
the STREAM_CTRLs weren't updated either. To the player, this looked like
the stream cache was never making progress, so playback was kept paused.
It can happen that read_packet() doesn't read a packet, even if it
succeeds. Typically this is because a packet was read, but then thrown
away, because it's not part of a selected stream. The result would be a
bogus EOF condition.
Fix by explicitly checking for EOF.
In corner cases, it might be possible that a demux_read_packet_async()
call fails to make the demuxer thread to read more packets.
If a packet is queued, the function will simply return a packet, without
marking the stream as active. As a consequence, read_packet() might
decide not to read any further packets, and the demuxer will never read
a packet and wake up the playback thread.
This was originally done to align it with demux_read_packet() semantics;
just drop this.
demux_read_any_packet() attempts to call read_packet(), but if no stream
is active, it can decide not to read anything. The function will return
NULL, which implies EOF. Fix this by explicitly
setting demux_stream->active if needed.
Also use dequeue_packet() instead of demux_read_packet(), because it's
cleaner. (Shouldn't change behavior.)
Possibly fixes#938.
We told the demuxer that a pipe (if stream cache is enabled) is
seekable. This is because the stream cache is technically seekable, it's
just that seeking may fail at runtime if a non-cached byte range is
requested.
This caused libavformat to issue seeks on initialization (at least when
piping mp4 youtube videos). Initialization failed completely after
spamming tons of error messages.
So, if an unseekable stream is cached, tell the demuxer that the file is
not seekable. This gets reversed later (when printing a message about
caching an unseekable stream), so the user can still try his luck by
issuing a seek command. The important part is that libavformat
initialization will not take code paths that will unnecessarily seek for
whatever reasons.
CC: @mpv-player/stable: regression from 0.3.x
It was easy to get into a wakeup feedback loop on EOF. The reason that
EOF is complicated is that we try to retry reading when EOF is reached,
in case the EOF state actually disappears (e.g. when watching a
currently downloaded file).
This feature is probably worthless, since in practice you have to do a
seek to "unstuck" it anyway, but since the old code also did this, we
want to keep this behavior for now.
Avoid the feedback loop by introducing another EOF flag (last_eof), that
contains the actual previous EOF state, and is not overwritten when
retrying reading. Wakeup is skipped if the EOF state didn't change.
Also, actually call the wakeup callback when EOF is detected.
The line that adds "ds->active = false;" actually does nothing, but in
theory it's cleaner.
The old FFmpeg API and the new Libav API disagree about mp4 display
rotation direction. Well, whatever, fix it trial-and-error-style.
CC: @mpv-player/stable: add
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
For OGG audio files, we usually merge the per-stream metadata back to
the file-global metadata. Don't do that for OGM, because with OGM most
metadata is actually per-stream.
libdvdnav can actually jump into the middle of the DVD (e.g. scene
selection menus do that). Then time display is incorrect: we start from
0, even though playback time is somewhere else. This really matters when
seeking. If the display time mismatches, a small relative seek will
apparently jump to the beginning of the movie.
Fix this by initializing the PTS stuff on opening. We have to do this
after some small amount of data has been read from the stream (because
libdvdnav is crap and doesn't always update the time between seeks and
the first read; also see STREAM_CTRL_GET_CURRENT_TIME remarks in
cache.c; although this was not observed when testing with scene
selection menus). On the other hand, we want to do it before opening the
demuxer, because that will read large amounts of data and likely will
change the stream position.
Also see commit 49813670.
Technically needed, but not strictly. It seems it works without in
practice, because demux_lavf.c reads exactly one packet for fill_buffer
call, so there are never packets queued.
We used a complicated and approximate method to cache the stream
timestamp, which is basically per-byte. (To reduce overhead, it was only
cached per 8KB-block, so it was approximate.)
Simplify this, and read/keep the timestamp only on discontinuities. This
is when demux_disc.c actually needs the timestamp.
Note that caching is currently disabled for dvdnav, but we still read
the timestamp only after some data is read. libdvdread behaves well, but
I don't know about libbluray, and the previous code also read the
timestamp only after reading data, so try to keep it safe.
Also drop the start_time offset. It wouldn't be correct anymore if used
with the cache, and the idea behind it wasn't very sane either (making
the player to offset the initial playback time to 0).
This should work now, at least kind of. Note that actual success depends
on the behavior of the underlying lib{dvd{nav,read},bluray}
implementation, which could go very wrong.
In the worst case, it could happen that the underlying implementation
seeks a long time before the seek target time. In this case, the player
will just decode video until the target time is reached, even if that
requires e.g. decoding 30 mintues of video before refreshing.
In the not-so-bad but still bad case, it would just miss the seek
target, and seek past it.
In my tests, it works mostly ok, though. Seeking backwards usually
fails, unless something like --hr-seek-demuxer-offset=1 is used (this
makes it seek to 1 second before the target, which may or may not be
enough to compensate for the DVD/BD imprecision).
This is a pretty big change. Instead of doing a half-hearted passthrough
of the playback timestamp, we attempt to rewrite the raw MPEG timestamps
such that they match with the playback time.
We add the offset between raw start timestamp and playback time to the
packet timestamps. This is the easy part; but the problem is with
timestamp resets. We simply detect timestamp discontinuities by checking
whether they are more than 500ms apart (large enough for all video
faster than 2 FPS and audio with reasonable framesizes/samplerates), and
adjust the timestamp offset accordingly.
This should work pretty well. There may be some problems with subtitles.
If the first packet after a timestamp reset is a subtitle instead of
video, it will fail. Also, selecting multiple audio or video streams
won't work (but mpv doesn't allow selecting several anyway). Trying to
demux subtitles with no video stream enabled will probably fail.
Untested with Bluray, because I have no Bluray sample.
Background:
libdvdnav/libdvdread/libbluray make this relatively hard. They return a
raw MPEG (PS/TS) byte stream, and additionally to that provide a
function to retrieve the current "playback" time. The playback time is
what should be displayed to the user, while the MPEG timestamps can be
completely different. Even worse, the MPEG timestamps can reset. Since
we use the libavformat demuxer (instead of parsing the MPEG packets in
the DVD/BD code), it's hard to associate between these timestamps. As a
result, the time display is special cased in the playloop, and of low
quality (updates only all 1 or 2 seconds, sometimes is incorrect). The
fact that the stream cache can be between demuxer and the stream source
makes things worse.
All the libs seem to provide an event that tells whether timestamps are
resetting. But since this signalling is byte based, it's hard to connect
it to the demuxed MPEG packets. It might be possible to create some sort
of table mapping file positions to discontinuities and new timestamps.
(For simplicity, this table could be 2 entries large, sufficient to
catch all discontinuities if the distance between them is larger than
the total buffering.)
It can happen that demux_fill_buffer() adds more than 1 packet, and then
the packets would add up. Affects demux_disc.c only (nothing else uses
this function).
wm4
Marcin Kurczewski
Diogo Franco (Kovensky)
shdown