The i_bps members of the sh_audio and dev_video structs are mostly used
for displaying the average audio and video bitrates. Keeping them in
bits-per-second avoids truncating them to bytes-per-second and changing
them back lateron.
This is incomplete; the video chain will still hold some vaapi objects
after destroying the decoder and thus the vaapi context. This is very
bad. Fixing it would require something like refcounting the vaapi
context, but I don't really want to.
mpv supports two hardware decoding APIs on Linux: vdpau and vaapi. Each
of these has emulation wrappers. The wrappers are usually slower and
have fewer features than their native opposites. In particular the libva
vdpau driver is practically unmaintained.
Check the vendor string and print a warning if emulation is detected.
Checking vendor strings is a very stupid thing to do, but I find the
thought of people using an emulated API for no reason worse.
Also, make --hwdec=auto never use an API that is detected as emulated.
This doesn't work quite right yet, because once one API is loaded,
vo_opengl doesn't unload it, so no hardware decoding will be used if the
first probed API (usually vdpau) is rejected. But good enough.
Sometimes, Matroska files store monotonic PTS for h264 tracks with
b-frames, which means the decoder actually returns non-monotonic PTS.
Handle this with an evil trick: if DTS is missing, set it to the PTS.
Then the existing logic, which deals with falling back to DTS if PTS is
broken. Actually, this trick is not so evil at all, because usually, PTS
has no errors, and DTS is either always set, or always unset. So this
_should_ provoke no regressions (famous last words).
libavformat actually does something similar: it derives DTS from PTS in
ways unknown to me. The result is very broken, but it causes the DTS
fallback to become active, and thus happens to work.
Also, prevent the heuristic from being active if PTS is merely monotonic
instead of strictly-monotonic. Non-unique PTS is broken, but we can't
fallback to DTS anyway in these cases.
The specific mkv file that is fixed with this commit had the following
fields set:
Muxing application: libebml v1.3.0 + libmatroska v1.4.1
Writing application: mkvmerge v6.7.0 ('Back to the Ground') [...]
But I know that this should also fix playback of mencoder produced mkv
files.
This was broken for some time, and it didn't recover correctly.
Redo decoder display preemption. Instead of trying to reinitialize the
hw decoder, simply fallback to software decoding. I consider display
preemption a bug in the vdpau API, so being able to _somehow_ recover
playback is good enough.
The approach taking here will probably also make it easier to handle
multithreading.
Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
Change how the video decoding loop works. The structure should now be a
bit easier to follow. The interactions on format changes are (probably)
simpler. This also aligns the decoding loop with future planned changes,
such as moving various things to separate threads.
This collects statistics and other things. The option dumps raw data
into a file. A script to visualize this data is included too.
Litter some of the player code with calls that generate these
statistics.
In general, this will be helpful to debug timing dependent issues, such
as A/V sync problems. Normally, one could argue that this is the task of
a real profiler, but then we'd have a hard time to include extra
information like audio/video PTS differences. We could also just
hardcode all statistics collection and processing in the player code,
but then we'd end up with something like mplayer's status line, which
was cluttered and required a centralized approach (i.e. getting the data
to the status line; so it was all in mplayer.c). Some players can
visualize such statistics on OSD, but that sounds even more complicated.
So the approach added with this commit sounds sensible.
The stats-conv.py script is rather primitive at the moment and its
output is semi-ugly. It uses matplotlib, so it could probably be
extended to do a lot, so it's not a dead-end.
It's not really needed to be public. Other code can just use mp_image.
The only disadvantage is that the other code needs to call an accessor
to get the VASurfaceID.
Although I at first thought it would be better to have a separate
implementation for hwaccels because the difference to software images
are too large, it turns out you can actually save some code with it.
Note that the old implementation had a small memory management bug. This
got painted over in commit 269c1e1, but is hereby solved properly.
Also note that I couldn't test vf_vavpp.c (due to lack of hardware), and
I hope I didn't accidentally break it.
They were used by ancient libavcodec versions. This also removes the
need to distinguish vdpau image formats at all (since there is only
one), and some code can be simplified.
Instead of doing it on every seek (libavcodec calls get_format on every
seek), reinitialize the decoder only if the video resolution changes.
Note that this may be relatively naive, since we e.g. (or: in
particular) don't check for profile changes. But it's not worse than the
state before the get_format change, and at least it paints over the
current vaapi breakage (issue #646).
This "sometimes" crashed when seeking. The fault apparently lies in
libavcodec: the decoder returns an unreferenced frame! This is
completely insane, but somehow I'm apparently still expected to
work this around. As a reaction, I will drop Libav 9 support in the
next commit. (While this commit will go into release/0.3.)
Apparently the "right" place to initialize the hardware decoder is in
the libavcodec get_format callback.
This doesn't change vda.c and vdpau_old.c, because I don't have OSX, and
vdpau_old.c is probably going to be removed soon (if Libav ever manages
to release Libav 10). So for now the init_decoder callback added with
this commit is optional.
This also means vdpau.c and vaapi.c don't have to manage and check the
image parameters anymore.
This change is probably needed for when libavcodec VDA supports gets a
new iteration of its API.
Like with the previous commit, this is probably not needed, but it's
unclear whether that really is the case. Most likely, it used to be
needed by some demuxer, and now the only demuxer left that could
_possibly_ trigger this is demux_mkv.c.
Note that mjpeg is the only decoder that reads the extra_huff option,
and nothing in libavformat actually sets the option. So maybe it's
fundamentally not needed anymore.
This case can't happen with the normal realvideo codepath in
demux_mkv.c, because the code would errors out if the extradata is too
small, and everything would be broken anyway in the case the vd_lavc.c
condition is actually triggered.
It still might happen with VfW-muxed realvideo in Matroska, though.
Basically, I'm hoping this doesn't matter anyway, and that the vd_lavc.c
code was for other old demuxers, like demux_avi or demux_rm. Following
the commit history, it's not really clear for what demuxer this code
was added.
Set the flag CODEC_FLAG_OUTPUT_CORRUPT by default. Note that there is
also CODEC_FLAG2_SHOW_ALL, which is older, but this seems to be ffmpeg
only.
Note that whether you want this enabled depends on the user. Some might
prefer that only good frames are output, while others want the decoder
to try as hard as possible to output _anything_. Since mplayer/mpv is
rather the kind of player that tries hard instead of being "clever", set
the new default to override libavcodec's default.
A nice way to test this is switching video tracks. Since mpv doesn't
wait for the next key frame, it'll start feeding the decoder with a
packet from the middle of the stream.
This ended up a little bit messy. In order to get a mp_log everywhere,
mostly make use of the fact that va_surface already references global
state anyway.
In my opinion, config.h inclusions should be kept to a minimum. MPlayer
code really liked including config.h everywhere, though, even in often
used header files. Try to reduce this.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
wm4
Marcoen Hirschberg
Luca Barbato
Martin Herkt
Andrey Morozov