Any bad HRESULTs should have been printed already and lots of failure modes
don't have an HRESULT leading to awkward hr = E_FAIL business.
This also checks the exit status of GetBufferSize in the align hack. A final
fatal message is added if either of the retry hacks fail.
This API isn't deprecated (yet?), but it's still inferior and harder to
use than avcodec_free_context().
Leave the call only in 1 case in af_lavcac3enc.c, where we apparently
seriously close and reopen the encoder for whatever reason.
Use avcodec_free_context() unstead of random other calls. Actually it
was already used in the second case, but calling avcodec_close() is
redundant.
Don't crash if allocating a codec context fails.
Previously, the entire convert_buffer was being copied to the desination without
regard to the fact that it may be packed and therefore smaller.
The allocated conversion buffer was also way to big
bytes * (channels * samples) ** 2
instead of
bytes * channels * samples
This shouldn't affect which are chosen, but it should speed up the search by
putting more common configurations earlier so that a working sample format and
sample rates can be found sooner obviating the need to search them for each
iteration of the outer loops.
The loop to select the native wasapi_format for the incoming audio was
not breaking correctly when it found the most desirable format. It
therefore executed completely leaving the least desirable format (u8) as
the choice.
fixes#4582
This is the last sample format that was only in mpv and not in FFmpeg
(except the spdif special formats). It was a huge pain, even if the
removed code in af_lavrresample is pretty small after all.
Note that this drops S24 from the ao_coreaudio AOs too. I'm not sure
about the impact, but I expect it doesn't matter.
af_fmt_change_bytes() was unused as well, so remove that too.
I'd actually be somewhat interested in supporting this, as it could help
testing the S24 conversion code. But then again it's only a pain,
there's no immediate need, and it would require new options to make
ao_pcm.c select this output format at all.
Do conversion directly, using the infrastructure that was added before.
This also rewrites part of format negotation, I guess.
I couldn't test the format that was used for S24 - my hardware does not
report support for it. So I commented it, as it could be buggy. Testing
this with the wasapi_formats[] entry for 24/24 uncommented would be
appreciated.
Instead of the infrastructure added in the previous commit to do the
conversion within the AO.
If this is used, and snd_pcm_status_get_avail() returns more frames than
snd_pcm_write*() actually accepts, you will get some nice audio
corruption.
Also, this mutates the data passed via play(), which is rather fishy,
but sort of doesn't matter for now. Surely this will cause unintended
bugs and WTFs.
I plan to remove the S24 sample formats in mpv. It seems like we should
still support this _somehow_ in AOs though. So the idea is to convert
the data to more obscure representations (that would not be useful for
filtering etc. anyway) within the AO.
This commit adds helper to enable this. ao_convert_fmt is meant to
provide mechanisms for this, rather than a generic audio format
description (as the latter leads only to overly generic misery). The
conversion also supports only cases which we think will be needed at
all.
The main advantage of this approach is that we get S24 out of sight,
and that we could support other crazy formats (like S20). The main
disadvantage is that usually S32 will be selected (if both S32 and S24
are available), and there's no user control to force S24. That doesn't
really matter though, and at worst makes testing harder or will lead
to unpleasant arguments with audiophiles (they'd be wrong anyway).
ao_convert_fmt.pad_lsb is ignored, although if we ever find a case in
which playing S32 with data in the LSBs breaks when playing it as padded
24 bit format. (For example, WAVEFORMATEXTENSIBLE recommends setting the
unused bits to 0 if wValidBitsPerSample implies LSB padding.)
UWP does not support the whole IMMDevice API. Instead, you need to use a
new API (available starting from Windows 8), which is in addition not in
MinGW, and extremely unpleasant to use.
The wasapiuwp2.dll wrapper is a small custom MSVC DLL, which does this
instead, and returns a normal IAudioClient.
Before this, ao_wasapi did not initialize on UWP.
While this is perfectly OK on Unix, it causes annoying valgrind
warnings, and might be otherwise confusing to others.
On Windows, the runtime can actually abort the process if this is
called.
push.c part taken from a patch by Pedro Pombeiro.
The code accounting for the terrible AUDCLNT_E_BUFFER_SIZE_NOT_ALIGNED
semantics (which MSDN claims can happen "starting with Windows 7" - so
probably on Windows 10 too) duplicated the call for creating the
IAudioClient. That's not great, so get rid of it.
Let wasapi_thread_init() handle this. It has a retry loop anyway. This
redoes device lookup and format negotiation, but potential failures due
to race conditions (what if the driver decides to change behavior)
shouldn't be worse than before.
Before this change, AOs could have internal alignment, and play() would
not consume the trailing data if the size passed to it is not aligned.
Change this to require AOs to report their alignment (via period_size),
and make sure to always send aligned data.
The buffer reported by get_space() now always has to be correct and
reliable. If play() does not consume all data provided (which is bounded
by get_space()), an error is printed.
This is preparation for potential further AO changes.
I casually checked alsa/lavc/null/pcm, the other AOs might or might not
work.
I'm not even sure when/if FFmpeg produces those. It's just confusing. If
you really need this, you can still use dl-dr. I expect that most use is
unintentional.
Probably fixes#4545.
Right now, the current order pretty much means that pulse defaults to
S16 for arbitrary unsupported formats, but fallback to float would make
more sense since it's the easiest to convert everything to without
requiring dithering, and PA will probably just internally convert things
to float anyway.
Also move S32 above S16, which essentially means format_maps is sorted
by preference. (Although ao_pulse currently ignores this and always
picks the first as a fallback)
The user bugmen0t was apparently a shared github account with publicly
available login. Thus, we can't get LGPL relicensing permission from the
people who used this account. To relicense successfully, we have to
remove all their changes.
This commit should remove 20d1fc13, f26fb009, defbe48d. It also should
remove whatever test fragments were copied from the ancient configure,
as well as some configure logic (potentially that device path stuff).
I think this change still preserves the most important use-cases of OSS:
BSDs, and the Linux OSS emulation (the latter for testing only).
According to an OSS user, the 4front checks were probably broken anyway.
The SunAudio stuff was probably for (Open)Solaris, which is dead.
ao_oss.c itself will remain GPL, and still contains bugmen0t changes.
Although the origins lie somewhere in libaf, which was written by
"anders" and who explicitly disagreed with the LGPL relicensing, we can
change the license of these files, because all code was written by
"alex", who agreed with the relicensing.
The only things that remain from anders' code is the AF_FORMAT_ and af_
prefixes (see e.g. 66f4e563). It was alex who redid this file and added
the format identifiers we have today (507121f7). It's also nice to see
that alex actually claimed copyright on format.c (221a599f). In commit
efb50cab even the bitmask concept (which anders introduced with his
early af_format.c code) was removed, and essentially all lines and
symbols by anders were dropped.
To put it into perspective: the original af_format code was for
converting actual sample data and relied on OSS sample format
identifiers, mpv's format.c/h provides its own sample formats, but
does not do any data conversion.
Remove an now inaccurate comment from format.c (it somehow even survived
the typo that was present in the original commit). Also remove most of
the format.c include statements - most of them are technically anders'
code. We keep limits.h though.
All relevant authors of the current code have agreed.
As always, there are the usual historical artifacts that could be
mentioned. For example, there used to be a large number of decoders
by various authors who were not asked, but whose code was all 100%
removed. (Mostly due to FFmpeg providing all codecs.)
One point of contention is that Nick Kurshev might have refactored the
old audio decoder code in 2001. Basically, there are hints that it might
have been done by him, such as Arpi's commit message stating that the
code was imported from MPlayerXP (Nick's fork), or all the files having
his name in the "maintainer" field. On the other hand, the murky history
of ad.h weakens this - it could be that Arpi started this work, and Nick
took it (and possibly finished it).
In any case, Nick could not be reached, so there is no agreement for
LGPL relicensing from him. We're changing the license anyway, and assume
that his change in itself is not copyrightable. He only moved code, and
in addition used the equivalent video decoder framework (done by Arpi,
who agreed) as template. For example, ad_functions_s was basically
vd_functions_s, which the signature of the decode callback changed to
the same as audio_decode(). ad_functions_s also had a comment that said
it interfaces with "video decoder drivers" (I'm fixing this comment in
this commit).
I verified that no additional code was added that is copyright-relevant,
still in today's code, and not copied from the existing code at the time
(either from the previous audio decoder code or the video framework
code). What apparently matters here is that none of the old code was not
written by Nick, and the authors of the old code have given his
agreement, and (probably) that Nick didn't add actual new code (none
that would have survived), that was not trivially based on the old one
(i.e. no new copyrightable "work").
A copyright expert told me that this kind of change can be considered
not relevant for copyright, so here we go.
Rewriting this would end with the same code anyway, and the naming
conventions can't be copyrighted.
All relevant authors have agreed to the relicensing.
Problem cases:
eca47b1a5e: someone else gets credited for the "idea" of this change,
but it doesn't seem like it was a patch (otherwise reimar would have
said "patch"). Also, the associated code got essentially removed again
anyway. (The option parsing was rewritten fully.)
ffb529e4eb: anonymous/unknown author, but the code was fully removed
anyway. The struct was removed, and the modern code does explicit
read/write calls.
40789473d2: author was not contacted, but this code was removed
anyway. The magic number (0x7ffff000) is still in the new code, but I
don't think that is copyright relevant.
c750b8ab2d: the message was entirely removed.
All contributors of the current code have agreed. ao.c requires a
"driver" entry for each audio output - we assume that if someone who
didn't agree to LGPL added a line, it's fine for ao.c to be LGPL
anyway. If the affected audio output is not disabled at compilation
time, the resulting binary will be GPL anyway, and ootherwise the
code is not included.
The audio output code itself was inspired or partially copied from
libao in 7a2eec4b59 (thus why MPlayer's audio code is named libao2).
Just to be sure we got permission from Aaron Holtzman, Jack Moffitt, and
Stan Seibert, who according to libao's SVN history and README are the
initial author. (Something similar was done for libvo, although the
commit relicensing it forgot to mention it.)
242aa6ebd4: anders mostly disagreed with the LGPL relicensing, but we
got permission for this particular commit.
0ef8e55573: nick could not be reached, but the include statement was
removed again anyway.
879e05a7c1: iive agreed to LGPL v3+ only, but this line of code was
removed anyway, so ao_null.c can be LGPL v2.1+.
9dd8f241ac: patch author could not be reached, but the corresponding
code (old slave mode interface) was completely removed later.
This case is a bit weird, because MPlayer certainly also has a file
named af_format.c. Both appear to have the function of converting audio
data between sample formats.
However, mpv's af_format.c is a rewrite, and doesn't actually do
conversion by itself. It's similar to vf_format.c, and forces the
generic filter chain code to insert conversion filters, instead of doing
conversion explicitly.
mpv's current af_format.c started out as af_force.c in d9582ad0a4. It
was renamed to af_format.c in e60b8f181d, while the old af_format.c was
split into two new filters. In 943c785619 the filename was changed to
af_format.c as well.
The new af_format.c does not contain any libaf code, except for some
potentially copy & pasted skeleton and boilerplate code. (We don't
account for this in per-filter file licenses, as the old libaf code
has to be removed fully, at which point the filters will have to be
ported to another framework, which will removed that boilerplate code.)
The old filters based on af_format.c were progressively replaced and
removed. Support for non-native endian and formats with signedness
different from native FFmpeg was completely removed in 831d7c3c40.
The old 24 bit conversion code was removed in 552dc0d564 (made
unnecessary by 5a9f817bfd).
Also list hwdec_vaglx.c as GPL-only, which doesn't have anything to do
with this commit.
All authors have agreed.
The initial commit d33703496c as well as the current code contain this
line:
* inspired by SoundTouch library by Olli Parviainen
We assume this is about the algorithm (not the code), and the author of
the original patch actually wrote all code himself.
All authors have agreed.
One exception is 71247a97b3, whose author was not asked, but we deem
the change as trivial. (And technically it was replaced when the audio
chain dropped non-native endian sample formats.)
All authors have agreed to the relicensing.
The code was pretty much rewritten by Stefano Pigozzi. Since the rewrite
happened incrementally, and seems to include refactored portions of
older code, this relicensing was done on the pre-refactor code do.
The original commit adding this AO (as ao_macosx.c) credits Timothy J.
Wood as original author. He was asked and agreed to LGPL. It's not
entirely sure from which project this code came from, but it's probably
libao. In that project, Stanley Seibert made some changes to it (who as
a major developer of libao was asked just to be sure), and also Ralph
Giles and Ben Hines made two small changes. The latter were not asked,
but none of their code survived anyway.
All authors have agreed.
Commit 94d3170bd0 is a bit murky: Nick could not be reached, and arpi's
changes were obviously inspired or copied from Nick's. However, the
changed symbols were removed and do not exist anymore.
Although pretty similar to the probably unrelicensable
video/fmt-conversion.c/h (basically using the same idea, but for audio),
it was written by someone else. The format mapping was first added in
commit ad95e046c2.
The new replaygain code accidentally applied the linear gain as cubic
volume level. Fix this by moving the computation of the volume scale out
of the af_volume filter.
(Still haven't verified whether the replaygain code works correctly.)
IMMDeviceEnumerator_RegisterEndpointNotificationCallback() will start
listening for notifications, and is the point at which callbacks can
start firing. These callbacks will read the fields we set after the
register calls, which is a potential race condition. Move it upwards.
Literally copy-pasted from the same commit for video filters. (Once new
code for filters is implemented, this will all go away or at least get
unified anyway.)
This was supposed to restrict output to formats supported by us. But we
usually support all FFmpeg sample formats anyway (if not, it will error
out gracefully, and we would add the missing format). Basically, it's
just useless bloat.
This tried to use AF_FORMAT_DOUBLE as KSDATAFORMAT_SUBTYPE_IEEE_FLOAT,
with wBitsPerSample==64. This is probably not allowed, and drivers
appear to react inconsistently to it. (With one user, the format was
accepted during format negotiation, but then rejected on actual init.)
Remove it, which essentially forces it to fall back to some other
format. (Looks like it'll use af_select_best_samplerate(), which would
probably make it try S32 next.)
The af_fmt_from_planar() is so that we don't have to care about
AF_FORMAT_FLOATP. Wasapi always requires packed data anyway.
This should actually handle other potentially unknown sample formats
better.
This changes that set_waveformat() always set the exact format. Now it
might set a "close" format instead. But all callers seem to deal with
this well. Although in theory, callers should probably handle the
fallback. The next cleanup (if ever) can take care of this.
Basically, see the example in input.rst.
This is better than the "old" vf-toggle method, because it doesn't
require the user to duplicate the filter string in mpv.conf and
input.conf.
Some aspects of this changes are untested, so enjoy your alpha testing.
Remove low quality drc filter. Anyone whishing to have dynamic range
compression should use the much more powerful acompressor ffmpeg filter:
mpv --af=lavfi=[acompressor] INPUT
Or with parameters:
mpv --af=lavfi=[acompressor=threshold=-25dB:ratio=3:makeup=8dB] INPUT
Refer to https://ffmpeg.org/ffmpeg-filters.html#acompressor for a full
list of supported parameters.
Signed-off-by: wm4 <wm4@nowhere>
The buffer_size may be updated before the process callback is called for
the first time. Or, the connection graph could change, which changes the
latency of the pipeline after mpv's output. Ensure we keep on top of
these changes by registering callbacks to update our latency estimation.
It appears some device can be missing if we filter too many. In
particular, I've seen devices starting with "front" and "sysdefault"
being mapped to different hardware. I conclude that it's not sane trying
to present a nice device list to users in ALSA. It's fucked. (Although
kodi appears to attempt some intense "beautification" of the device
list, which includes parsing parameters from the device name and such.
Well, let's not.)
No other audio API requires such ridiculous acrobatics.
Apparently POLLERR can be set if poll is called while the device is in
the SND_PCM_STATE_PREPARED state. So assume that we can simply call
snd_pcm_status() to check whether the error is because the device went
away (i.e. we expect it to return ENODEV if this happened).
This avoids sporadic device lost warnings and AO reloads. The actual
device lost case is untested.
For example, previously, --audio-device='alsa/' would provide ao->device="" to
the alsa driver in spite of the fact that this is an already parsed option. To
avoid requiring a check of ao->device[0] in every driver, make sure this never
happens.
Fall back on PATH_DEV_DSP if nothing is set.
This mirrors the behaviour of --audio-device / --alsa-device.
There doesn't appear to be a general way to list devices with oss, so
--audio-device=help doesn't list oss devices except for the default one if the
file exists.
Previously --audio-device was ignored entirely by ao_oss.
fixes#4122
See: https://msdn.microsoft.com/en-us/library/windows/desktop/dd743946.aspx
Microsoft example code often uses a SAFE_RELEASE macro like the one in
the above link. This makes it easier to avoid errors when releasing COM
interfaces. It also reduces noise in COM-heavy code.
ao_wasapi.h also had a macro called SAFE_RELEASE, though unlike the
version above, its SAFE_RELEASE macro accepted a second parameter which
allowed it to destroy arbitrary objects other than just COM interfaces.
This renames ao_wasapi's SAFE_RELEASE to SAFE_DESTROY, which should more
accurately reflect what it does and prevent confusion with the Microsoft
version.
In a first pass, we check whether libavcodec is present.
Then we try to compile a snippet and check for FFmpeg vs. Libav. (This
could probably also be done by somehow checking the pkgconfig version.
But pkg-config can't deal with that idiotic FFmpeg idea that a micro
version number >= 100 identifies FFmpeg vs. Libav.)
After that we check the project-specific version numbers. This means it
can no longer happen that we accidentally allow older, unsupported
versions of FFmpeg, just because the Libav version numbers are somehow
this way.
Also drop the resampler checks. We hardcode which resampler to each with
each project. A user can no longer force use of libavresample with
FFmpeg.
This can be useful in other contexts.
Note that we end up setting AVCodecContext.width/height instead of
coded_width/coded_height now. AVCodecParameters can't set coded_width,
but this is probably more correct anyway.
The FFmpeg versions we support all have the APIs we were checking for.
Only Libav missed them. Simplify this by explicitly checking for FFmpeg
in the code, instead of trying to detect the presence of the API.
Since we set "skip_manual", we can actually get frames with this set.
Currently, only AV_PKT_FLAG_DISCARD will trigger this flag, and only
mov.c sets the latter flags, so this is related to FFmpeg's half-broken
mp4 edit list support.
Apparently you set the native sample rate when passing through AC3.
This fixes passthrough with 44100 Hz AC3.
Avoid opening a decoder for this and only open the parser. (Hopefully
DTS will also support this some time in the future or so - having to
open a decoder just to get the profile is dumb.)
Same deal as with video. Including the EOF handling.
(It would be nice if this code were not duplicated, but right now we're
not even close to unifying the audio and video code paths.)
Looks quite like a bug. If you have a filter chain with only the
dynaudnorm filter, and send call av_buffersrc_add_frame(s, NULL), then
subsequent av_buffersink_get_frame() calls will return EAGAIN instead of
EOF.
This was apparently caused by a recent change in FFmpeg.
Some other circumstances (which I didn't fully analyze and which is due
to the playloop's absurd temporary-EOF behavior on seeks) then led the
decoder loop to send data again, but since libavfilter was stuck in the
EOF state now, it could never recover. It kept sending new input (due to
missing output), until the demuxer refused to return more audio packets.
Each time a filter error was printed.
Fortunately, it's pretty easy to workaround. We just mark the p->eof
flag as we send an EOF frame to libavfilter. The p->eof flag is used
only to recover from temporary EOF: it resets the filter if new data is
available again. We don't care much about av_buffersink_get_frame()
returning a broken EAGAIN state in this situation and essentially ignore
it, meaning if we get EAGAIN after sending EOF, we assume effectively
that EOF was fully reached.
Remove ad_spdif from the normal codec list, and select it explicitly.
One goal was to decouple this from the normal codec selection, so
they're less entangled and the decoder selection code can be simplified
in the far future. This means spdif codec selection is now done
explicitly via select_spdif_codec(). We can also remove the weird
requirements on "dts" and "dts-hd" for the --audio-spdif option, and it
can just do the right thing.
Now both video and audio codecs consist of a single codec family each,
vd_lavc and ad_lavc.
Currently, if init_filter fails after lavf_ctx is allocated, uninit is called
which frees lavf_ctx, but doesn't clear the pointer in spdif_ctx. So, on the
next call of decode_packet, it thinks it is already initialized and uses it,
resulting in a crash on my system.
We log a large number of formats, but we rarely log the result of the
probing. Change this.
The logic in try_format_exclusive() changes slightly, but should be
equivalent. EXIT_ON_ERROR() checks for FAILED(), which should be
exclusive to SUCCEEDED().
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
Until now, this was only implemented for ao_alsa and AOs not using
push.c. ao_alsa.c relied on enabling funny underrun semantics for
avoiding resets on lower levels, while other AOs using push.c didn't do
anything.
Change this and at least make push.c copy silent data to the AO. This
still isn't perfect as keeping track of how much silence was played when
seems complex, so we don't do it. The consequence is that frame-stepping
will essentially randomize the A/V offset (it'll recover immediately
when unpausing, but still ugly). Also, in order to empty the currently
buffered audio on seeks etc., we still call ao_driver->reset and so on,
so the AO driver will still need to handle this specially.
The intent is to make behavior with ALSA less weird (for one we can
remove the code in ao_alsa.c that tries to trigger an initial
underflow). Also might help with #3754.
The "default" entry (which is and always was mpv/mplayer's default) does
not have a description set in the ALSA API. (While "sysdefault"
strangely has.)
Instead of an empty description, this should show something nice, so
reuse the ao.c code for naming default devices (see previous commit).
It's still a bit ugly that audio-device-list will have a default entry
for "Autoselect device" and "Default (alsa)", but then again we probably
want to allow the user to force ALSA (i.e. prevent fallbacks to other
AOs) just because ALSA is so flaky and makes this a legitimate feature.
This will make it easier for AOs to add explicit default device entries.
(See next commit.)
Hopefully this change doesn't lead accidentally to bogus "Default"
entries to appear, but then it can only happen if the device ID is
empty, which would mean the underlying audio API returned bogus entries.
Use the device name as fallback. This is ugly, but still better than
skipping the description entirely. This can be an issue on ALSA, where
the API can return entries without proper description.
This happens when ALSA gives us more channels than we asked for, for
whatever reasons. It looks like this wasn't handled correctly. The mpv
and ALSA channel counts could mismatch, which would lead to UB.
I couldn't actually trigger this case, though. I'm fairly sure that
drivers or plugins exist that do it anyway. (Inofficial ALSA motto: if
it can be broken, then why not break it?)
If the input is already mono or stereo, or if channel map selection
results in mono or stereo, then disable further use of the champ ALSA
API (or rather, stop trusting its results). Then we behave like a simple
application that only wants to output mono or stereo.
See #3045 and #2905. I couldn't actually test these cases, but this
commit is supposed to fix them.
set_chmap() skipped _setting_ the ALSA chmap if chmap use was requested
to be disabled by setting dev_chmap.num=0 by the caller, but it still
queried the current ALSA channel map. We don't trust it that much, so
disable that as well.
But we still query and log it, because that could be helpful for
debugging. Otherwise we could skip the entire set_chmap() call in these
cases.
Both AVFrame.pts and AVFrame.pkt_pts have existed for a long time. Until
now, decoders always returned the pts via the pkt_pts field, while the
pts field was used for encoding and libavfilter only. Recently, pkt_pts
was deprecated, and pts was switched to always carry the pts.
This means we have to be careful not to accidentally use the wrong
field, depending on the libavcodec version. We have to explicitly check
the version numbers. Of course the version numbers are completely
idiotic, because idiotically the pkg-config and library names are the
same for FFmpeg and Libav, so we have to deal with this explicitly as
well.
If the "default" device refuses to be opened as spdif device (i.e. it
errors due to the AES0 etc. parameters), we were falling back to the
iec958 device. This is needed on some systems for smooth operation with
PCM vs. spdif.
Now change it to try "hdmi" before "iec958", which supposedly helps in
other situations.
Better suggestions welcome. Apparently kodi does this too, although I
didn't check directly.
The player tries to avoid splitting frames with spdif (sample alignment
stuff). This can in certain corner cases with certain drivers lead to
the situation that ao_get_space() returns a number higher than 0 and
lower than the audio frame size. The playloop will round this down to 0
bytes and do nothing, leading to a missed wakeup. This can lead to
underruns or playback completely getting stuck.
It can be reproduced by playing AC3 passthrough with no video and:
--ao=null --ao-null-buffer=0.256 --ao-null-outburst=6100
This commit attempts to fix it by allowing the playloop to write some
additional data (to get a complete frame), that will be buffered within
the AO ringbuffer even if the audio device doesn't want it.
We always want to use __declspec(selectany) to declare GUIDs, but
manually including <initguid.h> in every file that used GUIDs was
error-prone. Since all <initguid.h> does is define INITGUID and include
<guiddef.h>, we can remove all references to <initguid.h> and just
compile with -DINITGUID to get the same effect.
Also, this partially reverts 622bcb0 by re-adding libuuid.a to the
build, since apparently some GUIDs (such as GUID_NULL) are not declared
in the source file, even when INITGUID is set.
This was in the parser code all along. As far as I can tell, *cp was
intended. There is no need to check cp for NULL (nor does it make any
sense to do so every time around the loop) for AF_CONTROL_COMMAND.
However, s->matrixstr can be NULL, so checking for that separately is in
order.
For stereo and typical L/R-first channel arrangements, this avoids
undesirable phasing artifacts, especially obvious when speed is changed
and then reset. Without this, there is a very audible change in the
stereo field even when librubberband is no longer actually making any
speed changes.
There were multiple values under M_OPT_EXIT (M_OPT_EXIT-n for n>=0).
Somehow M_OPT_EXIT-n either meant error code n (with n==0 no error?), or
the number of option valus consumed (0 or 1). The latter is MPlayer
legacy, which left it to the option type parsers to determine whether an
option took a value or not. All of this was changed in mpv, by requiring
the user to use explicit syntax ("--opt=val" instead of "-opt val").
In any case, the n value wasn't even used (anymore), so rip this all
out. Now M_OPT_EXIT-1 doesn't mean anything, and could be used by a new
error code.
Currently, calling mp_input_wakeup() will wake up the core thread (also
called the playloop). This seems odd, but currently the core indeed
calls mp_input_wait() when it has nothing more to do. It's done this way
because MPlayer used input_ctx as central "mainloop".
This is probably going to change. Remove direct calls to this function,
and replace it with mp_wakeup_core() calls. ao and vo are changed to use
opaque callbacks and not use input_ctx for this purpose. Other code
already uses opaque callbacks, or has legitimate reasons to use
input_ctx directly (such as sending actual user input).
The first one is printed even if the user disabled video (or there's no
video), so just remove it. The second one uses deprecated sub-option
syntax, so remove that as well.
And introduce a global option which does this. Or more precisely, this
deprecates the global wasapi and coreaudio options, and adds a new one
that merges their functionality. (Due to the way the sub-option
deprecation mechanism works, this is simpler.)
I decided that it's too much work to convert all the VO/AOs to the new
option system manually at once. So here's a shitty hack instead, which
achieves almost the same thing. (The only user-visible difference is
that e.g. --vo=name:help will list the sub-options normally, instead of
showing them as deprecation placeholders. Also, the sub-option parser
will verify each option normally, instead of deferring to the global
option parser.)
Another advantage is that once we drop the deprecated options,
converting the remaining things will be easier, because we obviously
don't need to add the compatibility hacks.
Using this mechanism is separate in the next commit to keep the diff
noise down.
Instead of requiring each VO or AO to manually add members to MPOpts and
the global option table, make it possible to register them automatically
via vo_driver/ao_driver.global_opts members. This avoids modifying
options.c/options.h every time, including having to duplicate the exact
ifdeffery used to enable a driver.
Normally I'd prefer a bunch of smaller functions with fewer parameters
over a single function with a lot of parameters. But future changes will
require messing with the parameters in a slightly more complex way, so a
combined function will be needed anyway. The now-unused "global"
parameter is required for later as well.
Positional parameters cause problems because they can be ambiguous with
flag options. If a flag option is removed or turned into a non-flag
option, it'll usually be interpreted as value for the first sub-option
(as positional parameter), resulting in very confusing error messages.
This changes it into a simple "option not found" error.
I don't expect that anyone really used positional parameters with --vo
or --ao. Although the docs for --ao=pulse seem to encourage positional
parameters for the host/sink options, which means it could possibly
annoy some PulseAudio users.
--vf and --af are still mostly used with positional parameters, so this
must be a configurable option in the option parser.
These are different AVCodecContext fields. pkt_timebase is the correct
one for identifying the unit of packet/frame timestamps when decoding,
while time_base is for encoding. Some decoders also overwrite the
time_base field with some unrelated codec metadata.
pkt_timebase does not exist in Libav, so an #if is required.
There are situations where the resampler is destroyed and recreated
during playback. If recreating the resampler unexpectedly fails, the
filter function is supposed to return an error. This wasn't done
correctly, because get_out_samples() accessed the resampler before the
check. Move the check up to fix this.
Instead of passing through double float timestamps opaquely, pass real
timestamps. Do so by always setting a valid timebase on the
AVCodecContext for audio and video decoding.
Specifically try not to round timestamps to a too coarse timebase, which
could round off small adjustments to timestamps (such as for start time
rebasing or demux_timeline). If the timebase is considered too coarse,
make it finer.
This gets rid of the need to do this specifically for some hardware
decoding wrapper. The old method of passing through double timestamps
was also a bit questionable. While libavcodec is not supposed to
interpret timestamps at all if no timebase is provided, it was
needlessly tricky. Also, it actually does compare them with
AV_NOPTS_VALUE. This change will probably also reduce confusion in the
future.
The code actually kept going out of EOF mode into resync mode back into
EOF mode when the playloop had to wait after an audio EOF caused by the
endpts. This would break seamless looping (as added by the next commit).
Apply endpts earlier, to ensure the filter_audio() function always
returns AD_EOF in this case.
The idiotic ao_buffer makes this an amazing pain in the ass.
The touched code is for seek resets and such - we simply want to reset
the entire resample state. But I noticed after a seek a tiny bit of
audio is missing (mpv's audio sync code inserted silence to compensate).
It turns out swr_drop_output() either does not reset some internal state
as we expect, or it's designed to drop not only buffered samples, but
also future samples.
On the other hand, libavresample's avresample_read(), does not have this
problem. (It is also pretty explicit in what it does - return/skip
buffered data, nothing else.)
Is the libswresample behavior a bug? Or a feature? Does nobody even
know? Who cares - use the hammer to unfuck the situation. Destroy and
deallocate the libswresample context and recreate it. On every seek.
The demuxer layer usually doesn't log per-stream information, and even
the replaygain information was logged only if it came from tags.
So log it in af_volume instead.
With the previous commit, ao_alsa.c now has 3 possible ways to pause
playback. Actually all 3 of them need get_delay() to fake its return
value, so don't duplicate that code.
Also much of the code looks a bit questionable when considering
inconsistent pause/resume calls from outside, so ignore redundant calls.
push.c does not handle this automatically, and AOs using push.c have to
handle it themselves. Also, ALSA is low-level enough that it needs
explicit support in user code. At least I haven't found any option that
does this.
We still can get away relatively cheaply by abusing underflow-handling
for this. ao_alsa.c already configures ALSA to handle underflows by
playing silence. So we purposely induce an underflow when opening the
device, as well as when pausing or resetting the device.
This introduces minor misbehavior: it doesn't account for the additional
delay the initial silence adds, unless the device has fully played the
fragment of silence when the player starts sending data to it. But
nobody cares.
