Use the *W variants instead of the implicit *A functions. (One could
define the UNICODE macro to switch the functions without suffix from
A to W, but I'm too lazy to figure out how portable that is, etc.)
Also make sure io.h defines a unicode aware printf().
Stop trying to read terminal input if a read attempt returns EOF. The
most important case where this matters is when someone runs the player
with stdin redirected from /dev/null and without specifying
--no-consolecontrols. This used to cause 100% CPU load while paused,
as select() would continuously trigger on stdin (the need for
--no-consolecontrols was not apparent to people with older mplayer
versions, as input reading was less efficient and latencies like
hardcoded sleeps kept CPU use well below 100%). Now this will only
cause a "Dead key input" error message.
Change the macosx_finder_args function so that when mplayer2 is
invoked from the Finder in a Mac application bundle, it redirects the
output to ~/Library/Logs/mplayer2.log instead of cluttering the global
system.log.
This doesn't affect terminal use which keeps writing to stdout and
stderr.
macosx_finder_args was using Carbon and wasn't usable any longer on
modern versions of MacOSX. This is very useful to embed mplayer in a
mac application bundle.
When using application bundles, the operating system will call the
main function with only one argument that identifies the process
serial number (this is some additional process identifier in osx other
than the pid). File open events are then dispatched to the application
through events that must be handled accordingly.
This assumes the terminal uses UTF-8. If invalid UTF-8 is encountered (for
example because the terminal uses a legacy encoding), the code falls back
to the old method and feeds each byte as key code to the input code.
In theory, UTF-8 input could randomly fail, because the code in getch2.c
doesn't try to fill the input buffer correctly with input sequences
longer than a byte. This is a problem with the design of the existing
code.
This moves all key codes above the highest valid unicode code point
(which is 0x10FFFF). All key codes below MP_KEY_BASE now directly map
to unicode (KEY_ENTER is 13, carriage return). Configuration files
(input.conf) can contain unicode characters in UTF-8 to map non-ASCII
characters/keys.
This shouldn't change anything user visible, except that "direct key
codes" (as used in input.conf) will change their meaning.
Parts of the bstr functions taken from libavutil's GET_UTF8 and
slightly modified.
Windows uses a legacy codepage for char* / runtime functions accepting
char *. Using UTF-8 as the codepage with setlocale() is explicitly
forbidden.
Work this around by overriding the MSVCRT functions with wrapper
macros, that assume UTF-8 and use "proper" API calls like _wopen etc.
to deal with unicode filenames. All code that uses standard functions
that take or return filenames must now include osdep/io.h. stat()
can't be overridden, because MinGW-w64 itself defines "stat" as a
macro. Change code to use use mp_stat() instead.
This is not perfectly clean, but still somewhat sane, and much better
than littering the rest of the mplayer code with MinGW specific hacks.
It's also a bit fragile, but that's actually little different from the
previous situation. Also, MinGW is unlikely to ever include a nice way
of dealing with this.
Some of the code, especially the dshow and windows codec loader parts,
are extremely hacky and likely full of bugs. The goal is merely getting
rid of warnings that could obscure more important warnings and actual
bugs, instead of fixing actual problems. This reduces the number of
warnings from over 500 to almost the same as when compiling on Linux.
Note that many problems stem from using the ancient wine-derived
windows headers. There are some differences to the "proper" windows
header. Changing the code to compile with the proper headers would be
too much trouble, and it still has to work on Unix.
Some of the changes might actually break compilation on legacy MinGW,
but we don't support that anymore. Always use MinGW-w64, even when
compiling to 32 bit.
Fixes some warnings in the win32 loader code on Linux too.
Install a signal handler on SIGCONT, and restore the terminal
attributes with tcsetattr() if it happens. This is needed with some
shells (such as tcsh) that don't restore the terminal attributes set
by mplayer. Without this, terminal I/O doesn't work as intended after
resume with these shells.
Fixes#155.
The commit "input: handle UTF-8 terminal input" accidentally messed up
the handling of certain special keys. Apparently only KEY_ENTER was
affected by this, because the code was valid UTF-8, but didn't directly
map to the keycode.
This assumes the terminal uses UTF-8. If invalid UTF-8 is encountered (for
example because the terminal uses a legacy encoding), the code falls back
to the old method and feeds each byte as key code to the input code.
In theory, UTF-8 input could randomly fail, because the code in getch2.c
doesn't try to fill the input buffer correctly with input sequences
longer than a byte. This is a problem with the design of the existing
code.
This moves all key codes above the highest valid unicode code point (which
is 0x10FFFF). All key codes below MP_KEY_BASE now directly map to unicode.
Configuration files (input.conf) can contain unicode characters in UTF-8
to map non-ASCII characters/keys.
This shouldn't change anything user visible, except that "direct key codes"
(as used in input.conf) will change their meaning.
getch2.c read data into a "char" array, and returned values other than
escape sequences directly from there. This meant that it could return
negative values (except on platforms where "char" is unsigned) if the
input contained bytes >= 128. This would break later parsing in
input.c as the values would be interpreted as having the MP_KEY_DOWN
flag set, which would make the key binding code think a key is held
down (and never released). Fix by changing the buffer type to unsigned
char.
The bug itself was very old, but started triggering visible breakage
more easily after commit 82b8f89bae ("input: rework event reading and
command queuing"). Before that the key values would be passed through
the input.c "key read function" interface, which (mis)interpreted the
negative values as errors from the function, and in most cases
discarded them without much visible effect.
Recent commit 5d5ca22a6d ("options: commandline: accept --foo=xyz
style options") left some bad code under "#ifdef MP_DEBUG" in
playtree.c, which caused a compilation failure if configured with
"--enable-debug". Fix this. Having the "#ifdef MP_DEBUG" there was
completely unnecessary; it only increased the risk for this kind of
problems for no real benefit - executing the asserts under it would
have no noticeable performance or other penalty in default builds
either. Remove several cases of such harmful "#ifdef MP_DEBUG".
Command line options like "-foo xyz" are ambiguous: "xyz" may be a
parameter to the option "foo" or an unrelated argument. Instead of
relying on the struct m_config mode field (commandline/file) pass
parameters to specify ambiguous mode explicitly. Meant for "--foo"
options which are never ambiguous on command line either.
Setting O_NONBLOCK on a file descriptor also affects all other fds
that share the same underlying open file description, and in case of
stdin such sharing is likely. Making stdin nonblocking can also make
stdout nonblocking (they may be the same connection to a terminal),
and it can also affect other processes (in "program1 | program2", the
shell may give the same terminal connection to program1 as stdin and
to program2 as stdout, thus program1 making its stdin nonblocking also
turns program2's stdout nonblocking).
To avoid these problems stop making fd 0 nonblocking. After the
previous commit this should no longer cause problems as long as
select() does not spuriously report the fd as readable.
Neither fd 0 slave input (-slave) nor additional opened fds (-input
file=X) were set to nonblocking mode as they should have been. Fix.
Also rename the horribly generic USE_SELECT #define used for a
specific slave input detail.
Move the definitions of all special key codes (those not passed by
ASCII value) to input/keycodes.h. Before they were spread between
osdep/keycodes.h, input/joystick.h, input/mouse.h and input/ar.h, plus
some special values in input.h. This was especially inconvenient as
the codes had to be coordinated to not conflict between the files.
The change requires a bit of ugliness as appleir.c includes
<linux/input.h> which contains various conflicting KEY_* definitions.
Work around this by adding a special preprocessor variable which can
be used to avoid defining these in keycodes.h.
getch2.c did not make stdin non-blocking, and relied on only being
called after select() had shown readability. Stop relying on that
assumption and set stdin to non-blocking mode. Hopefully no relevant
platform has problems with this...
configure: Compilation fixes for current Cygwin
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32724 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not #define _WIN32 on the command line for Cygwin.
Newer Cygwin versions no longer do this and hopefully we should be able
to survive without this hack as well. This change necessitates adapting
two #ifdefs in the MPlayer codebase. It is committed untested as I do
not have access to a Cygwin system.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32763 b3059339-0415-0410-9bf9-f77b7e298cf2
* hr-seek:
input: add default keybindings Shift+[arrow] for small exact seeks
input: support bindings with modifier keys for X input
core: audio: make ogg missing audio timing workaround more complex
core: add support for precise non-keyframe-limited seeks
core: add struct for queued seek info
commands: add generic option -> property wrapper
options: add "choice" option type, use for -pts-association-mode
core: remove looping in update_video(), modify command handling a bit
core: seek: use accurate seek mode with audio-only files
core: avoid using sh_video->pts as "current pts"
libvo: register X11 connection fd in input event system
core: timing: add special handling of long frame intervals
core: move central play loop to a separate function
Conflicts:
DOCS/tech/slave.txt
Add support for binding commands to modifier+key combinations like
"Shift+Left" or "Ctrl+Alt+x", and support reading such combinations
from the output window of X VOs.
The recognized modifier names are Shift, Ctrl, Alt and Meta. Any
combination of those and then a non-modifier key name, separated by
'+', is accepted as a key name in input.conf. For non-special keys
that produce characters shift is ignored as a modifier. For example
"A" is handled as a key without modifiers even if you use shift to
write the capital letter; 'a' vs 'A' already distinguishes the
combinations with a normal keymap, and having separate 'a', 'Shift+A'
and 'A' (written with caps lock for example) would bring more
confusion than benefit.
Currently reading the modifier+key combinations is only supported in
the output window of those VOs that use x11_common.c event
handling. It's not possible to input the key combinations in other VOs
or in a terminal window.
Make "-lavdopts threads=0" mean an autodetected number of threads, and
make that the default value of the option. Also increase the upper
limit of the option from 8 to 16. Add new file osdep/numcores.c which
tries to determine the number of cores available on the machine.
numcores.c is based (heavily modified) on public domain numcpus.c by
Philip Willoughby <pgw99@doc.ic.ac.uk>, downloaded from
http://csgsoft.doc.ic.ac.uk/numcpus/
Avoids issues if the system headers have a declaration for
gettimeofday but there's just no implementation there.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31733 b3059339-0415-0410-9bf9-f77b7e298cf2
Add a manifest file to disable file and registry "virtualization" on
Windows.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31630 b3059339-0415-0410-9bf9-f77b7e298cf2
2. Define SetPriorityClass() and GetCurrentProcess() in osdep.h
3. Include osdep.h in priority.c
This removes OS2-platform check in priority.c
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30828 b3059339-0415-0410-9bf9-f77b7e298cf2
Unfortunately keys only arrive after enter was pressed
and SetNamedPipeHandleState does not seem to help.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30784 b3059339-0415-0410-9bf9-f77b7e298cf2
These functions return void*, which is compatible with any pointer,
so there is no need for casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30744 b3059339-0415-0410-9bf9-f77b7e298cf2
This ensures that function declarations in both files always match.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30596 b3059339-0415-0410-9bf9-f77b7e298cf2
not be used without a declaration, causing issues on 64 bit systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30355 b3059339-0415-0410-9bf9-f77b7e298cf2
This is necessary at least on POSIX systems since the buffer returned by
nl_langinfo may change its contents with e.g. each setlocale call.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29332 b3059339-0415-0410-9bf9-f77b7e298cf2
Add basic support for Matroska ordered chapters. The switching between
segments is implemented as a general edit timeline that could also be
used for other purposes.
Some things still need improvement. In particular the current code
does not try to do any proper mapping between audio/video/subtitle
streams of different files and there should be options for better
control of how MPlayer searches other files for the required content.
The libdvdread4 and libdvdnav directories, which are externals in the
svn repository, are at least for now not included in any form. I added
configure checks to automatically disable internal libdvdread and
libdvdnav if the corresponding directories are not present; if they're
added manually then things work the same as in svn.
The "erase_to_end_of_line" string used to clear the terminal status
line was initialized with the termcap id "cd", which means to clear
all lines below the cursor. Change it to the correct "ce" to clear the
current line.
Usually the status line is on the bottommost line of the terminal so
the behaviour wouldn't differ much. However it did make a difference
when I tested starting MPlayer at the top of a huge gnome-terminal
window so the status line was not at the bottom; in that case clearing
just the current line used less CPU than clearing the part of the huge
window below the status line.
Replace all USE_ prefixes by CONFIG_ prefixes to indicate
options which are configurable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27373 b3059339-0415-0410-9bf9-f77b7e298cf2
wm4
Uoti Urpala
Stefano Pigozzi
Martin Herkt
Uoti Urpala
diego
reimar
cboesch
komh
zuxy
Amar Takhar
uau
Uoti Urpala
ulion